E-recruiting - Problems with candidate search

Hi experts,
I'm trying to test some enhancements in E-recruiting and I'm facing problems with the candidate search. At firts I thought the problem was with Trex, but after run report RCF_RECREATE_SEARCH_PROFILES I've found the errors below:
Error in program CL_HRRCF_SPB_CANDIDATE========CM003 line51
Error in program CL_HRRCF_SP_BUILDER===========CM003 line115
Error in dinamic calling method for class CL_HRRCF_CEC_INFOTYPE
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 83
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 68
Does anybody know what these errors mean?
Thanks in advance for any kind of help!
Best regards,
Thais

Hi again,
Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES again and the error is still the same.
As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
Does anybody has another suggestion?
Thanks in advance for any input!
Best regards,
Thais

Similar Messages

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

Recruiting problem with the candidate search by trex with questionnaires

Hi Gurus,
I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
In conclusion, I don't know how I can solve this problem with trex? Any idea?
Thanks in advance,
Juanjo Garcin.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

E-Recruiting: Problems with search profile and serach templates

Hi Recruiting-Experts,
I´m facing problems with "Search Profiles" and "Search Templates"
(Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date) belonging to infotype 5106.
Unfortunately, it doesn't work. The hit list is always empty.
What I did:
Customizing (see above)
Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
The result:
I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
By the way, the hit list is also empty when adding and searching for birthdate.
Has it got to do with the date stored in internal format?
Thanks for any comments / help.
Regards
CHRIS
=========================================================================

Hi Sebastian,
thanks for your quick answer.
That's why I didn't get it done for hours yesterday.
Thanks again,
Regards
CHRIS

E-recruiting - Weighting in Candidate search

How can we assign different weights to search criteria during a candidate search in e-recruiting. Currently, if I am using 5 criterias for candidate search, it only gives result with match as 100 % though I want to differentiate in the criterias by assigning different weights/ importance to each one.
Thanks in advance,
Devyash

Hi again,
Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES again and the error is still the same.
As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
Does anybody has another suggestion?
Thanks in advance for any input!
Best regards,
Thais

Problem with Binary search statement

Hi,
I have problem with reading the internal with Binary search.
I have two internal tables BSAS and BSIS. In BSAS I have 1,200,000 line items and BSIS 500,000 line items. I need to delete the line items if BSIS-BELNR NE BSAS-AUGBL.
I am using the following code :
 LOOP AT gt_bsas .
 READ TABLE gt_bsis WITH KEY bukrs = gt_bsas-bukrs
 belnr = gt_bsas-augbl
 gjahr = gt_bsas-gjahr.
 IF sy-subrc NE 0.
 DELETE gt_bsas.
 CLEAR gt_bsas.
 ELSE.
 endif.
endloop.
By this execution of the loop is taking long time. If I use the binary search it is fast but result is not correct.
Please suggest me, how to resolve this issue.
Thanks,
Sri.

Try this way:
LOOP AT gt_bsas .
SORT GT_BSIS BY BUKRS BELNR GJAHR.
READ TABLE gt_bsis WITH KEY bukrs = gt_bsas-bukrs
belnr = gt_bsas-augbl
gjahr = gt_bsas-gjahr
BINARY SEARCH.
IF sy-subrc eq 0.
****Do Nothing.
ELSE.
DELETE gt_bsas sy-tabix.
CLEAR gt_bsas.
endif.
endloop.
1. Also make sure that the KEY mentioned in READ statement follows the same seqeunce of gt_bsis structure.
Thanks,
Santosh
Message was edited by:
 SKJ

Problem with context search in iFS

Hello , here is my problem with iFS.
We have installation of Oracle 8.1.7 Enterprise edition with interMedia and iFS 1.1 on same server (Windows NT Server 4.0/512 RAM). During install everything went fine.
I had uploaded about 200 MB files in the iFS (pdf's and html's).
The problem is when I try to use context based search. If I search for file's name everything is fine, but when I search for a word that is in a file it almost immediately gives mi "0 file(s) found", and I'm sure that there are files that have that word in their body's.
What can be the problem?
Any sugestions will be in help.
Thanks in advance.

<BLOCKQUOTE>quote:<HR>Originally posted by mark_d_Drake ():
That's the way it works. Content Indexing is not on insert, it occurs when the ctxsrv process runs. See the IntermediaText doc for more information.
<HR></BLOCKQUOTE>
Documents's content is stored in the GLOBALINDEXEDBLOB column of the IFSSYS.ODMM_CONTENTSTORE table.
There is an text index GLOBALINDEXEDBLOB_I built on this column.
To make the context search possible just update this index using the following command in SQL*Plus:
SQL> exec ctx_ddl.sync_index('GLOBALINDEXEDBLOB_I');
If you want this index be updated automatically when new documents are uploaded/changed/deleted in iFS then start the ctxsrv utility on the computer where your Oracle database resides. To do this issue the following command in OS command line:
ctxsrv -user ctxsys/ctxpwd@db_alias
just replace here ctxpwd and db_alias with real values you specified during the installation.
null

E-Recruiting :Problem with BUPA_CENTRAL_CHANGE for HRALXSYNC

Dear Experts,
We have a problem with the function module BUPA_CENTRAL_CHANGE while executing the report HRALXSYNC & trying to repair the object P.
Please note that the sample implementations for the relevant BADIs are activated. Relevant entries are maintained in T77S0.The business partner details are also maintained.
In the report HRALXSYNC, we do the following :
Select an object P for whom there is no BP or NA (No candidate exists). The Basic data column shows RED for this object P.
On clicking the 'Start Repair' function, the following happens.
The Basic data column become GREEN indicating that the data is synchronised & a new NA object is created. But we also get the following error message :
<Start of error messages>
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 573
Serious error; see log
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM001 line 39
Serious error; see log
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM00I line 257
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM00I line 137
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
<End of error message>
The long text for the error mesasge for BUPA_CENTRAL_CHANGE shows this :
<start of message>
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
Message no. R11335
Diagnosis
The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
Within a LUW, the indicator must be consistently set or not set.
System Response
The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors.
<end of message>
Can any of you please shed some light on this?
What is the significance of the Parameter IV_X_SAVE ? Should this be blank or 'X'?
What customizations or BP settings are we missing here? Infact, any lead would be helpful
Many thanks,
Sowmya

Hi Sebastian,
The problem is solved with the application of this note. Thanks a lot for your input.
Best Regards,
Sowmya

Problems with collective search help

Hello SDNers,
I was working with collective search help.
Ex : zc_srch1 (Collective)
In the 'Include search help' i have included 2 search elementary search
help
Ex : zsrc1 and zsrc2 (both elementary)
I have also assigned the parameter assignment for each included search help.
I have also mentioned the search help parameter under definition tab
Ex field form zsrch1 and field1 from zsrch2
and also checked the import and export checkboxes.
Now i have used the search help in the abap program
ex: tmp type field1 matchcode object zc_srch1.
Now when i execute the program the collective search help is getting populated. when i try to choose a value it is not getting selected to the parameter box.
Regards,
Ranjith N

Hi,
Once again check back your seach help creation by following the link below.
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
Cheers!!
VEnk@

Problems with the Search for room content

Hi,
I face a problem configuring the search for room content using KM search iView (com.sap.km.Search).
I found the chapter Configuring the Search for Room Content in the help. So I set up the following things :
1- I assign the room_id iView parameter to the roomid room parameter (in the template)
2- I added room_cm_search component to the component set (I added it at the bottom of the "component for basic search function")
3- I select the entry "Folder" as the default search scope in the search option set. I specify a root folder for search as well.
But it doesn't work properly. It always returns "no result found". And if I add the room_cm_search component at the top of the "component for basic search function", It runs the search on all the documents of the default search scope, and not only on the room documents.
Can you please tell me the right way to configure the search for room content using the com.sap.km.Search iView ?
I work on EP 7.0 SP 10.
Thanks a lot,
Loïc LEVEUGLE

Hi Loic,
the Room Content Search iView is a special Search iView that is filtering for documents that were created in the Room Context (all documents get a specific metadata that is keeping the roomiD) . The easiest thing is to use the standard iView used for the delivered templates from SAP.
I would advise to use the iView that is already preconfigured for a room template or part template and can be found and referenced in your template from the following path: Portal Content ->com.sap.ip.collaboration--> TemplateAndPartContent --> Generic -->iViews and take the iView "Search Room"
If you reference that iView in your room template or room part template, you have to think about the correct configuration in the template configuration iView. Just take as example the configuration of the part template "SAP Search Room".
Or even better: Copy a template (room or part) from SAP that is containing the Room Search and delete everything what you don´t need out of the template. You safe time and you can add all additional content you´ll need to your template. Some ideas can be found in the following "How to Guide":
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0496f69-cb70-2910-21a6-c4cf2cc66311
What you have written under 3 -> would never work as the root folder for search doesn´t make any sense as the documents of a room are stored in different folders and you can´t define a root folder. Therefor you have the specific room_id parameter that is filtering what documents belong to the room.
Good luck,
Anja

Problem with Bridge search

Am I doing something wrong?
I title my folders with model names.
I put names, first, last, nothing works, no folders come up with Bridge search. help. thanks!

no folders come up with Bridge search.
Using both the search field top right in Bridge window and the Find Command under edit does give me the folder I searched for, so it should work.

Problem with custom search help for std SD_DEBI

Hi,
I have created a custom zcustom search help and included in std search help SD_DEBI.
In the custom serach help i have added the fields ktokd and sales area fields(sales org, Disb channel, division).
now when i goto va01 transaction and hit F4 for sold to party i was able view the KTOKD and sales area fields in the custom tab
when i select the values from f4 help and hit enter they are not getting displayed in sold to party field.
when i select only sales area fields from f4 and press enter they are getting displayed in sold to party field.
problem is with the ktokd field that i have included.
Any suggestions please let me know

Hi deepti,
I think you have missed parameter assignment from your Z append search help to standard search help.
Select the search help and click on Param Assignment button and assign the refernece parameter(KUNNR) of your
append search help to std collective search help (KUNNR).
Thanks,
Pawan

Problems with sort, search and write objects o an ArrayList

Hi
Lets say that i have two subclasses (the program is not finished so in the end it can be up to 34 classes) of an abstract superclass. I also got one class which basicly is a register in which i've created an ArrayList of the type <abstractClass>. This means that i store the two subclasses in the arrayList. no problems so far i think (at least eclipse doesn't mind).
1. now, i want to be able to sort the arrayList aswell as search thorugh it. I've tried Collections.sort(arrayList) but it doesn't work. So i have no idea how to solve that.
2.The search-method i made doesn't work as good as i hoped for either. I ask the user to first decide what to search for (choose subclass) and then input the same properties as the subclass we search for. I create a new object of the subclass with these inputs and try arrayList.contains(subClassObject)
it runs but it returns +"false"+ even if i create an object with the exact same properties.
3. If i want to write this arrayList to a txtFile so i can import it another time. Which is the best method? first i just thought i'd convert the arrayList to string and then print every single object to a textfile as strings. that worked but i have no good idea how to import that into the same arrayList later. Then i found ObjectOutputStream and import using inputStream.nextObject(). But that doesn't work :(
Any ideas?
Thank you!
Anton

lavalampan wrote:
Hi
Lets say that i have two subclasses (the program is not finished so in the end it can be up to 34 classes) of an abstract superclass. I also got one class which basicly is a register in which i've created an ArrayList of the type <abstractClass>. This means that i store the two subclasses in the arrayList. no problems so far i think (at least eclipse doesn't mind).
1. now, i want to be able to sort the arrayList aswell as search thorugh it. I've tried Collections.sort(arrayList) but it doesn't work. So i have no idea how to solve that. Create a custom comparator.
>
2.The search-method i made doesn't work as good as i hoped for either. I ask the user to first decide what to search for (choose subclass) and then input the same properties as the subclass we search for. I create a new object of the subclass with these inputs and try arrayList.contains(subClassObject)
it runs but it returns +"false"+ even if i create an object with the exact same properties.Implement hashCode and equals.
>
3. If i want to write this arrayList to a txtFile so i can import it another time. Which is the best method? first i just thought i'd convert the arrayList to string and then print every single object to a textfile as strings. that worked but i have no good idea how to import that into the same arrayList later. Then i found ObjectOutputStream and import using inputStream.nextObject(). But that doesn't work :(Depends on what your requirement is, but yes, Serialization might work for you. Your classes should in that case implement Serializable.
Kaj

Problem with hidding Search fields used to pass IDs to the table

Hello,
I have a problem which may be trivial but I cannot find the solution for quite a long time.
Please help
I have created a standard Search Panel with CustomSimpleSearch
I have LOVs to search for manager and organizations. You simply choose the a manager of an organization from the list.
Then I would like to put the values back on the original form
in two fields (in case of manager)
Manager name - visible for users so they know what they selected
Manager ID - to use to search the records in the table I have
SO I have defined mappings and the values are passed and then
the records are found based on Manager ID. The only problem is
I don;t want the ID to be displayed on the screen. I would like to hide this
messageTextInput
but I cannot
I tried setting the following attributes:
Rendered = false -> searching does not work
Secret = true -> searching does not work
Length = 0 - > lenght does not change
How to hide this field so that the ID is passed to it transparently and then the value is used for searching ?
Thank You in advance for Your help
This forum is great
Michael

Use formValue bean instead of messageTextInput. It is used for the very same purpose which you are looking for.
--Shiv

E-recruiting - Problems with candidate search

Similar Messages

Maybe you are looking for