E-Recruiting profile transfers and uploads
Hello,
I wonder if anyone can help me with the following two questions?
1) Would it be possible to build a transaction or program(s) that would allow us to transfer data on an external candidate's profile to a new internal candidate profile? A lot of our new employees find it frustrating that they have to re input the data into their internal profiles once they become internal Bruce Power employees.
2) There is a third party recruiting software system called Executive Centre. One of the modules in the Executive Centre is called Career Portal (which is very similar to eRecruiting). Would it be possible to create an upload of data from Career Portal to the internal candidate profiles in eRecruiting?
Thank you in advance for your help
Sandy Wong
Hi Sandy,
well I have a few questions. Do you want to transfer this data to the PA profiles in HR or to internal candidates in E-Recruiting?
In the first case I cannot help you, PA infotypes and E-Recruiting is not compatible at all.
But in the last case you can activate the direct movement of the external candidate to an internal ones.
Therefore you need an RFC connection from HR to E-Recruiting. Also the T77S0 switch on HR RECFA DTCBA needs to be set on the RFC-connection.
This shall work if you are on ERP2004 or ERP2005 (HR version).
In this case the hired candidate you hired via PA48 will reset to an internal ones. The external user will be replaced by an internal ones after next ALE transfer.
Regards
Similar Messages
-
Edit User Profile How do I enalble user lo loggin to their own profile page and edit it?
Hi
I am having some problems....... any help would be nice
I am using DWCS3 and ADDT toolbox extension wamp and phpmyadmin
I am trying to create a site for people to be able to post a profile with a picture and info and display it in a dynamic table.
I can create the form, a database and display the data on another page in a dynamic table all ok..... kind of.
I can create a user registration system with ADDT.
I can redirect them after registration to a post profile page, which has a form to upload details. I can then display those details on a user info page.
I would like to allow logged in users to be able to click on a link to their own profile page , which would show the same form that was filled out in the post profile page, but would be already populated with their previously entered information. I would like users to be able to edit the content of the form and update the information in the database and automatically delete delete any previously entered information ( only in the fields that have been edited)
How do I go about doing this?.... step by step?
I want to allow logged in user to view their own profile not every bodies.... how do I do that?
I have read on another post that to do something similar to this I should filter my database information using a session varialble MM_username that I think is created automatically after user logs in .... but I don;t know how to do this.... I really don;t understand is this the way I link my user to a page that only displays their info ? or is there another way?
I would also like to allow only people who have posted a profile to be able to edit profile ...... do I do that by
1. new user registers and is redirected to login page
2. user logs in and is redirected to an index page that has a post profile button and a edit profile button but only the POST button is active ( and links to a form to post info ) and the edit profile button is linked to a " You must post a profile first" page ( with a link back)
3 so user posts profile and is directed to an index page which has an edit profile button which is now linked to an edit profile page
Does that sound correct?
Any suggestions in getting all this to work would be much appreciatedHi Yomi,
I have created the users page which submits to a members page and tell the user to edit biodata, profession, and hobbies. but on clicking I am really confused on how the id will be transfered from the members page to update biodata and the user updates the form which will show past records. this should also apply to the profession and hobbies
If I understand this right, you might want to consider providing a complete "userdata" section which comes with a Dynamic List and a Dynamic Form to have users add & update their data plus (via the Dynamic List) track all past records
Lastly is it possible I create recordset at will and the id will be passed thru since kt-login-id behaves sololy
I really can´t recommend this "pass user_id as URL variable" approach in this case, as URL variables are displayed in the browser´s address bar -- and this is absolutely insecure, because anyone could simply change the displayed "user_id" value, reload the form and hence edit data which belongs to a different user.
The only secure method is indeed to use ADDT´s session variable kt_login_id
Fatal error: Call to undefined function: var_export()
Not sure, but maybe some "includes" files haven´t been generated
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
GUI_DOWNLOAD and UPLOAD Function Modules?
Hi All,
What exactly done by GUI_DOWNLOAD and UPLOAD Function Modules?
Akshitha.What you exactly want know?
Here is the Sap documentation for both FM:
FU GUI_UPLOAD
Short Text
Upload for Data Provider
Functionality
The module loads a file from the PC to the server. Data can be transferred binarily or as text. Numbers and date fields can be interpreted according to the user settings.
Example
Binary upload: No conversion or interpretation
begin of itab,
raw(255) type x,
end of itab occurs 0.
CALL FUNCTION 'GUI_UPLOAD'
exporting
filetype = 'BIN'
filename = 'C:\DOWNLOAD.BIN'
tables
data_tab = itab.
Text upload
begin of itab,
text(255) type c,
end of itab occurs 0.
CALL FUNCTION 'GUI_UPLOAD'
exporting
filetype = 'ASC'
filename = 'C:\DOWNLOAD.TXT'
tables
data_tab = itab.
Parameters
FILENAME
FILETYPE
HAS_FIELD_SEPARATOR
HEADER_LENGTH
READ_BY_LINE
DAT_MODE
CODEPAGE
IGNORE_CERR
REPLACEMENT
CHECK_BOM
VIRUS_SCAN_PROFILE
NO_AUTH_CHECK
FILELENGTH
HEADER
DATA_TAB
Exceptions
FILE_OPEN_ERROR
FILE_READ_ERROR
NO_BATCH
GUI_REFUSE_FILETRANSFER
INVALID_TYPE
NO_AUTHORITY
UNKNOWN_ERROR
BAD_DATA_FORMAT
HEADER_NOT_ALLOWED
SEPARATOR_NOT_ALLOWED
HEADER_TOO_LONG
UNKNOWN_DP_ERROR
ACCESS_DENIED
DP_OUT_OF_MEMORY
DISK_FULL
DP_TIMEOUT
Function Group
SFES
FU GUI_DOWNLOAD
Short Text
Download an Internal Table to the PC
Functionality
Data transfer of an internal table form the server to a file on the PC. The Gui_Download module replaces the obsolete modules Ws_Download and Download. The file dialog of the download module is available in the class Cl_Gui_Frontend_Services.
Further information
TYPE-POOLS: ABAP.
Binary download table
DATA: BEGIN OF line_bin,
data(1024) TYPE X,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
Ascii download table
DATA: BEGIN OF line_asc,
text(1024) TYPE C,
END OF line_asc.
DATA: data_tab_asc LIKE STANDARD TABLE OF line_asc.
DAT download table
DATA: BEGIN OF line_dat,
Packed TYPE P,
Text(10) TYPE C,
Number TYPE I,
Date TYPE D,
Time TYPE T,
Float TYPE F,
Hex(3) TYPE X,
String TYPE String,
END OF line_dat.
DATA: data_tab_dat LIKE STANDARD TABLE OF line_dat.
Get filename
DATA: fullpath TYPE String,
filename TYPE String,
path TYPE String,
user_action TYPE I,
encoding TYPE ABAP_ENCODING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
WINDOW_TITLE = 'Gui_Download Demo'
WITH_ENCODING = 'X'
INITIAL_DIRECTORY = 'C:\'
CHANGING
FILENAME = filename
PATH = path
FULLPATH = fullpath
USER_ACTION = user_action
FILE_ENCODING = encoding
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
IF user_action <> CL_GUI_FRONTEND_SERVICES=>ACTION_OK.
EXIT.
ENDIF.
Download variables
DATA: length TYPE I.
Binary download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_bin
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
Ascii download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_asc
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
DAT download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'DAT'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_dat
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
Parameters
BIN_FILESIZE
FILENAME
FILETYPE
APPEND
WRITE_FIELD_SEPARATOR
HEADER
TRUNC_TRAILING_BLANKS
WRITE_LF
COL_SELECT
COL_SELECT_MASK
DAT_MODE
CONFIRM_OVERWRITE
NO_AUTH_CHECK
CODEPAGE
IGNORE_CERR
REPLACEMENT
WRITE_BOM
TRUNC_TRAILING_BLANKS_EOL
WK1_N_FORMAT
WK1_N_SIZE
WK1_T_FORMAT
WK1_T_SIZE
WRITE_EOL
FILELENGTH
DATA_TAB
FIELDNAMES
Exceptions
FILE_WRITE_ERROR
NO_BATCH
GUI_REFUSE_FILETRANSFER
INVALID_TYPE
NO_AUTHORITY
UNKNOWN_ERROR
HEADER_NOT_ALLOWED
SEPARATOR_NOT_ALLOWED
FILESIZE_NOT_ALLOWED
HEADER_TOO_LONG
DP_ERROR_CREATE
DP_ERROR_SEND
DP_ERROR_WRITE
UNKNOWN_DP_ERROR
ACCESS_DENIED
DP_OUT_OF_MEMORY
DISK_FULL
DP_TIMEOUT
FILE_NOT_FOUND
DATAPROVIDER_EXCEPTION
CONTROL_FLUSH_ERROR
Function Group
SFES -
Editing and uploading a downloaded document
Have an application that allows for both uploads of documents (using a File Browse item and transferring the relevant fields from the HTMLDB_APPLICATIION_FILES view to my customized table) and downloads of documents (using a call via a URL to a customized copy of the Oracle download procedure presented in the sample application). Both the upload and download process work OK.
The issue I'm running into, is that when a user wants to download a document, the user is presented with the choice of opening or saving the downloaded document. That works OK, but what we'd really like to do is offer the user a chance to edit the downloaded document and then by saving the changes (such as by closing the window in which the downloaded document appears, after making edits), the modified document is "re-uploaded" to the database. What we have to do now is save the download document to the user's PC, then the user has to open the document and modify it, save it, and re-upload it to the database.
Any ideas on how we can save the users a few steps and upload the document directly after editing? Thanks.Well, you can only do that when the content being edited is plain text (mime type text/plain) and less than 32K (hard limit in PL/SQL)
Looking at how that page (4000:46) is built in f4000.sql, there seem to be some APIs that do some magic
l_text := wwv_flow_utilities.clob_to_varchar2(
wwv_flow_utilities.blob_to_clob(p_blob=>l_blob,p_charset=>l_charset));Clearly, all these are undocumented internal-only Oracle APIs that Oracle is not obliged to support.
Search around on asktom.oracle.com, I am sure you will find code examples that do this sort of thing.
Hope this helps. -
Assign status profile automatically when upload documents in cFolder
Hello all,
Is there any way to make the automatic assignment of a state profile to documents that are upload into a collaboration of cFolder?
At this time we do it manually, but carries to assign the state profile every time we upload a new document.
Best Regards,
Jennifer Lohan.Hi
Use FM CFX_API_STATUS_PROFILE_ASSIGN somewhere in any user exit or BADI (let me know the scenario)
we pass status profile GUID and the Folder / Doc /collaboration GUID into the FM and it attaches the status profile to desired object.
regards
Alok -
When will Apple have a searchable text reader and upload file capability?
When will Apple have a searchable text reader and upload file capability? I have a large text file I need to upload to my iPhone, search, and dial.
Anything planned?I had a Palm the I used for work and travel it had a very nice application called DOCUMENTS TO GO. It allowed you to upload, view, and edit .doc, .xls, and .ppt files. this was very handy when traveling. Also, I could sync my palm with my iMac and work PC using bluetooth, took care of the file transfers as well. I would like to have the same capability on my iPhone. I bought it to replace all of my old stuff i need it to the same as my old stuff. I hope that Apple reads this and gets on the ball. Until then I still have to carry my Palm or thumb drive on trips.
-
Create a table and upload data in MS ACCESS from SAP ABAP programming?
Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields. -
MSS Requisitions is not moving to Recruiter's POWL and system is throwing the errors.
Hi everyone,
Hope all are doing in good spirit.
I have an issue in regards with Requisition Creation and its related process.
I am working in Standalone architecture where Recruiting server is in another instance apart from HR system.
We are using WS45600028 standard workflow.
When Manager submits the Requisition to higher level manager to approve, its done successfully and the notification is going to the Manager. But after approval, Requisition is not going to Requiter's POWL queries.
I have maintained Support Group, Lead Recruiter in it and assigned this to Requisition.
I have checked HRP5131 table. But there is no SOBID which sould be flaged as Lead Recruiter.
When Higher level Manager approves the Requisition, It is successful bu there is an error in slg1.
Error: Error when ending the Work item 0000007704 in HR system.
The system returned the call of interface SAP_WAPI_WRITE_CONTAINER in this context
System Response:
Call ended with an error. The function was not executed.
Procedure: Remove call.
At the same system is throwing the error for the User (This user is used for RFC creation using with transaction SM59): No candidate for this User.
Details of error: The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77
Procedure for system administration:
Check the context in which the error occurs.
Since it it probably program error and not an input error, you should contact SAP.
Can you please look into the above issue and address me if you have any solution for the same.
Any help would be greatly appreciated.
Thank you.
Regards,
SekharHi Nicloe,
Thank you very much for your response.
I have done the data transfer from HR system to E-Rec system through ALE iDoc using PFAL.
All the is transferred and corresponding NA, CP, BP generated in E-Rec for P.
All the users(Recruiter, Managers and Recruiting Admin) data have transferred to E-Rec System.
But when Manager is creating the Requisition Request, it going to his higher level manager for approval and its been approved successfully. Later it is not updating the Recruiter's POWL.
In DB table HRP5125 Requisition data is created but with only few details like Start and End date, Object ID. in E-Rec system.
In HRP5131, NB related data is there but there is no SOBID for lead Recruiter.
Immediately i am getting errors in both HR and E-Rec systems as follows after the Requisition got approved.
In HR system, Error when ending the Work item 0000007704. Workflow completed successfully but still here is an error.
In E-Rec systemThe error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77.
And system says, Since it it probably program error and not an input error, you should contact SAP.
I heard that there might be an inconsistency in NA, BP, CP when we do PFAL transaction for data transfers. Can you suggest me to raise SAP ticket in this context?
Or Did i miss any configuration in this connection?
What can be done now to fix this? I am working EHP 5 and SP level is 11.
Can you please let me know. Kindly help me out of it as i am struck with this since very long time.
Thank you.
Regards,
Sekhar -
I am runing all my cameras throught the profile editor (1.0.0.39) beta2 as I cannot find a newer version. The three camera I am working with are the Canon 1DS2, Cannon Rebel XS and a lumix G1. The rebel and 1ds2 work fine but when I try to open the G1's dng file (converted from the G1 Raw) the PE tells me its not a valid DNG file. Am I missing someting ? At first I assuemed the camera was too new but the Rebel XS was recognized.........
Try the software that comes with the x-rite ColorChecker Passport and see if it works any better. It performs the same function as the DNG Profile Editor:
http://www.xritephoto.com/ph_product_overview.aspx?ID=1257&Action=Support&SoftwareID=917
You will need to "register" with x-rite and login.
Alternatively, you can upload your CC G1 RAW and I'll try it in the DNG Profile Editor and/or the x-rite software. -
We Purchased Lion OS in April and uploaded to our iMac. We are now ready to upgrade our MacPro, but can't seem to find out how to upgrade using the previous purchase (said we could use the Lion OS purchase on up to 3 devices). We have the receipt of purchase with the Order # and Purchase #, but I just can't figure out how to do the upgrade. Where do I go? What reference # do I enter?
Go back to the App Store with the same Apple ID you used to purchase Lion. It should show up in your Purchases list ready to download. If it doesn't, log out, log back in, and hold down Option key while clicking on Purchases.
A tip: Once the download is finished, dismiss the Installer. Go to your Applications folder and find it - copy it to another folder or hard drive to keep for emergency purposes. Then click on that installer and install (it is automatically removed/deleted after the installation is complete). That way you can avoid having to do another lengthy download.
And, yes, just to confirm: you can install Lion on as many Macs you own and control. However, the license is not transferable; if you ever sell the machine, you need to erase Lion and reinstall the original OS.
You don't go to iTunes - go to the Mac App Store (in your Applications folder). You do need 10.6.6 (or 10.6.8) to have the Mac app store. -
E-Recruiting for external and internal candidates
Hello,
I am looking for documents/guides that can show me how to configure E-Recruiting frontend (for external candidates) to point to the integrated ECC (HR + E-Recruiting) backend, and to configure SAP Portal with ESS (for internal candidates) to point to the integrated ECC backend. I am also looking to configure Trex 7.0 for E-Recruiting. I am unable to find any documents regarding this scenario. Can anyone help me locate some material?Hi Vishal,
There is no standard field available but this requirement can be handled through an enhancement in the specific BSP page. In your requirement it will be personal details tab in candidate profile wizard and it would also necessiate to enhance infotype HRP5102 - candidate information with this field.
You can also refer the blog below contributed by Hemendra Singh Manral to understand how to go about doing this enhancement in the BSP.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/other-topics/e-recruitment%20adding%20additional%20custom%20fields%20to%20requisition%20maintenance.pdf
Hope this information helps.
Best Regards
G Raj -
How can download the roles from one system and upload them into another ??
Do anyone have the solution ..... ......it very important.
Hi,
Visit [Role Maintenance Functions|http://help.sap.com/saphelp_nw04/helpdata/en/e4/15e48efd6c11d296430000e82de14a/content.htm] in section Download/Upload.
To avoid inconsistencies, all roles from which a role is derived are also downloaded. When you download composite roles, all the roles which they contain are also downloaded.
When you upload a role, all role data, including authorization data is uploaded from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case. You must therefore regenerate the authorization profiles after the upload.
Mass Download:
Save several roles on the PC.
You can choose on the selection screen whether you:
Also want to transport the single roles contained in the selected composite roles (Customizing switch ADD_COMPOSITE_ROLES in table SSM_CUST)
Also want to transport the generated profiles for all single roles (PROFILE_TRANSPORT in table PRGN_CUST)
You can define the default setting for both options using the value in the Customizing switch. If you explicitly set a switch to NO, the option in question on the selection screen is not active. Otherwise, it is active.
Regards,
Srilatha. -
mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?
You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
Firefox download and uploads are corrupting
Since yesterday, almost every download or upload I attempt in firefox inadvertently stops and the files end up corrupt; images are discolored or filled with scrambled pixels, videos immediately stop loading after only reaching 1 or 2 megabytes, even the re-installation of firefox has become impossible to do because the download keeps resetting before it can reach the installation process. I'm unsure of the problem's overall source as of now, and I want to go through as many solutions before I should just consider backing up my files and going along with a system reboot.
Make sure that your security software isn't causing this issue.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
I tried to download IOS7 to my Iphone 5. After quite a while, my phone had the symbol to connect to Itunes. I went to our desktop and did this. A message said I had to restore my phone. I clicked on restore. In a short while, I received a message
-
JSP page doesnt load for one user on machine1, but does 4 all on same box
Hi, I have a Citrix application on a box to enable many users to connect remotely to different applications on differnt boxes using the browser on this box. Just like terminal Services or remote desktop I tested 15 users and all of them are able to l
-
Why is PS 6 showing hourglass/egg timer rather than thumbnails in the organizer?
I have uploaded some pictures using Photoshop Elements 6 and they usually show up as thumbnails. They are showing as an hourglass/egg timer instead. All previously uploaded pictures are still showing as thumbnails. How do I correct this problem?
-
Hi, I am trying jena adaptor API. I succeeded in different kind of loading. I would like to know if it is the same tool that this api uses. Mainly, I wonder if the bulk loader uses a stage table and sqlldr like we directly use it in oracle . Thanks f
-
Hello everyone, my dreamweaver doesn´t start.
hello everyone, i got a problem, dreamweaver doesn´t start on my notebook ( it´s a acer aspire), i tried to start it when all other programms are shut down (espiacelly anti-virus and firewall software) but it doesn´t work... if someone can help me th