E-Recruiting Recruiter Dashbord problem

Hello,
when I start the Recruiter Role in EHP4, I can see the dashbord und the queries. But when I click on a posting or try to
create a new one from the dashboard, it doesn't work.
When I start the service ERC_A_WORKCENTER from the backend its works.
Please help me!
Sami Abidi

Hello...  We were not getting that issue, but we are finally in business and fully exploring EhP4 for e-R.
For our situation, we had to fully patch the portal and MSS up to the equivalent patch level for the back end system.  Once we completed this patching, the EhP4 functionality began to work.  It seems there are portal dependencies beyond the ERP Common Parts requirement that was documented. 
Also, you may like to know that while the homepage framework is an option, it is not a requirement for EhP4.  We also learned that other OBN documented steps seem unnecessary for this solution which adds the POWL layer.  The documentation to clarify the rules for multiple layers of abstraction, seems to be lacking in my opinion. 
I hope this helps those of you that are interested in this thread!
Regards,
Pat Gallaher

Similar Messages

  • SAP Recruitment configuration problem

    Hi all,
    I am working on an SAP recruitment project version 4.6C.
    I need to get some custom texts into applicant correspondance. For this, I got to see some documentation in the configuration explaining to create a new module pool program and so.
    now the problem is I couldnot figure out where to replace this custom program.
    I would be glad if anyone can take a look and let me know. At the location where i found this documentation there is no execute button for entries.
    Thanks in advance.
    regards,
    Bharat

    Hi
    Did anyone check it in SAP 4.6C system.Pts. guranteed.
    Regards
    Bharat

  • E-Recruiting RCF_PERIODICAL_SERVICES problem

    Hi Experts,
    I have done the Trex config properly. But still when I am goin for TREX search it is showing blank result. while there is data in database.
    When I checked the logs of RCF_PERIODICAL_SERVICES then it is showing error in each run.
    Errors are -
    Serious error; see log
    The error occurred in program CL_HRRCF_SP_BUILDER===========CM003 line 115
    The incorrect HR object has the key 01NC50000596
    The error occurred in program CL_HRRCF_CEC_POSTING_REQUI====CM004 line 222
    Serious error; see log
    The error occurred in program CL_HRRCF_INFOTYPE=============CM00E line 68
    Error in the HRKWF interface
    The incorrect HR object has the key 01NC50000596
    The error occurred in program CL_HRRCF_HRKWF_STORAGE========CM009 line 46
    Serious error; see log
    The error occurred in program CL_HRKWF_DOC==================CM016 line 10
    In table T77RCF_EXT_PUB the field published is set as blank (not 'X') for each  publication .
    The program RCF_PERIODICAL_SERVICES gives error message at each run but all the entries from table T77Rcf_SPT_CP are removed at each run .
    I am not understanding that where the problem occurs and how to solve it.
    Please help if anyone had faced the same problem or have any suggestions.
    Response is highly appreciated.

    Hi Sourabh,
    We are facing the same issue. Did you manage to solve this ??
    Your help will be highly appreciated.
    Please reply.
    thanks
    Jayanthi.K

  • E-Recruiting - Doubt about job for changes in HR system.

    Hi,
    We are on E-Rec 604 with seperated standlone e-rec system.
    I did the initial transfer of the Org Management and employees data through PFAL from ECC to E-Recruit and all were ok.
    Now we are planning the job for future changes.
    The job in e-recruiting is ok, using RBDMIDOC and RBDAPP01.
    But I have some doubts with the job in HR system. I think I have to use those steps in the job:
    RBDMIDOC
    RSEOUT00
    RBDMOIND
    RBDCPCLR
    It´s true?.
    And in this case, with those steps the new employees in HR system will be created as internal candidates in E-Recruiting without problems?.
    Could somebody help me, please?.
    Best Resgrads,
    Esther

    Dear Esther,
    In HR system, you only need to schedule these reports to transfer HR data from change pointers :
    RBDMIDOC to created idocs from change pointers
    RSEOUT00 to send idocs to the target system
    RHALESMD : is used to generate Idocs that have already been processed or failed when report RBDMIDOC was running so
    still with change pointers unprocessed in table BDCPV
    Hope it helps,
    Kind Regards
    Christine

  • Questionnaire is coming as BSP application instead of web dynpro applicatio

    Hi,
    we are using EHP4 SAP e-recruiting the problem here is whenever we perform send questionnaire activity it is giving a link for the candidate which is actually BSP application.
    but we need to have web dynpro application instead as we are using ehp4
    please suggest any configuration needed.

    Kranthi,
    Can you give some suggestions on configuring for web dynpro ABAP in user interfaces. we are using ERC, ECC on same server.
    Regards,
    Bharat

  • Problem adding a new tab to e-Recruiting

    Hi,
    I am facing the following problem in adding a new tab in the E-Recruitment (Manpower Requisition) application. The developer had created a new BSP page of the following information.
    Name space: SAP
    Application: ZHR_MPOWER_REQ
    Controller URL: MPR.DO
    A customized element (9001) had also been created with the above information.
    I have also created a context ZTEST and a Container Seq '1000' and under the Container Seq, I have allocated a few assignment of Element of which I have assigned the new element - 9001.
    Having assigned the above, I am still unable to see the new tab in the link. Please let me know if there are any missing steps.
    Thanks.

    Dear,
    Just want to check, r u able to Run the Custom BSP as a Standard alone application ?.
    Have you Configure T77RCF_APPl_LOG table ?.
    Alvin, i could not see why you could not see the BSP Page.
    Please got to t-code  SLG1 and check the log's why it's not coming.
    Could you please give more details, what you have done.
    Thanks & Regards
    Sabba Ravi

  • E-Recruiting 3.0 Installation problems

    We're in the process of installing the e-Recruiting add-on in an integrated environment, and we're having problems. Early last week, the BASIS team attempted to load the e-Recruiting add-on into an integrated environment (our Technical Sandbox), in order to prove that there will not be any complications when we load it into our Development system.  I noticed that there is a lot of standard delivered configuration data that did not get loaded into the integrated system.  For example, most of the tables within the IMG that hold configuration data within the Applicant Tracking area was delivered empty in our client.  The data does, however, exist in client 000.  Since we obviously can't do a complete client-copy in our integrated system, does anyone have any suggestions of how we can select just the e-Recruiting data?  We're thinking of using the following packages, but we're uncertain that if it contains everything in e-Recruiting 3.0:
    PAOC_RCF                       Recruitment Factory                 
    PAOC_RCF_BL                    Recruitment Factory: Business Logic 
    PAOC_RCF_REPORTING             Recruitment Factory: Reporting      
    PAOC_RCF_TALENT_BL             RCF: Business Logic for the Candidate
    PAOC_RCF_TALENT_UI             RCF: User Interface for the Candidate
    PAOC_RCF_UI                    Recruitment Factory: User Interface 
    I've already contacted OSS, but their most recent response was not very helpful:
    I would suggest you to read the IMG documentation and to fill the
    tables youself or copy the customizing from client 000 step by step.
    It turened out that this is the most practicable and most efficient
    way to set up the E-Recruiting system. If you have further questions
    how to set up your system please inform your SAP consultant.
    Does anyone have experience loading e-Recruiting 3.0 onto an integrated system? 
    Thanks in advance,
    Jon

    Jon,
    When you say integrated, what else is running on the ECC 5.0? Can you provide more information?
    There are standard notes for E-Recruitment, which is executed on SAINT as as add-on. The notes, include prerequisites for e-Rec 3.0.
    Regards,
    James

  • Problem with data distribution from HCM to e-Recruiting

    Hello masters:
    I have a problem when I try to distribute data from HCM to e-Recruiting. I´m getting code 51 just for the PA infotypes segments (E1P0000, E1P0001, etc.). The error message tha I am receiving is:
    "Error in subroutine read_namtb for structure of infotype".
    My e-Recruiting system is SAP EHP 1 for SAP NetWeaver 7.0, so I'm using Business Partners for storing data from PA infotypes.
    I'm using message type HRMD_ABA, basic type HRMD_ABA05.
    I think it could be the implementation HRRCF00_INBD_NEWMOD from the badi HRALE00INBOUND_IDOC, because it usually get inactive even though I go to activate it.
    Does anybody knows what can I do?
    Thanks in advance!
    Edited by: Rodrigo Arenas Arriola on Jun 25, 2009 2:45 AM

    Hello Rodrigo,
    Ifyou are using EhP1 for NW 7.0 you should have E-Recruiting 600 EhP 4 on your system.
    I never encountered this special error message so far, so i have to "guess". The message indicates that the system had trouble reading some infotype information.
    The ALE distribution for EhP4 is storing the PA data in new infotypes 558*. The error you get points to a missing BAdI activation. If the BAdIs are not activated correctly, ALE will try to write the information from the PA infotypes 1 to 1 into the E-Recruiting system. But E-Recruiting does not know the PA infotypes which should exactly lead to the error you get.
    Could you check the following settings:
    BAdI                     Implementation 
    HRSYNC_P                 CONV_HR_DATA_TO_EREC -> active
    HRALE00INBOUND_IDOC      HRRCF00_INBD_NEWMOD -> active
    HRALE00SPLIT_INBOUND     HR_INB_PROCESS_IDOC -> inactive
    HRALE00INBOUND_IDOC      HRRCF00_DELETE_SPREL -> inactive
    Kind Regards
    Roman

  • Login problem with E-Recruiting URL, where check host name?

    Hi,
    I've set up a standard Recruiter user and assigned him the standard Recruiter security profile. When I run RCF_GENERATE_URLS, I get this URL:
    http://iwdfvm2160.wdf.sap.corp:51080/sap/bc/bsp/sap/hrrcf_start_int?sap-client=200&sap-language=EN&rcfSpId=0003
    But I get an "internal error" when I login with my User. Our server's host name is iwdfvm2160.gcsap.com, but the program isn't resolving this. This is probably the cause of the error, but how can I get it to pick up our host name?
    We are on E-Recruiting version 6, and it's running on the same box as HCM.
    Thanks, Vlad

    Hello Vlad,
    usually the links generated from the report are correct. Only very rare problem might be in the network structure of your company that the internal dns servers can't resolve the server name or the sap servers are in a not reachable network segmant as you never worked with http access to the servers for other applicatiohns.
    But if you log on the first time with your user and have not been working with the application yet, the more probable reason for this error is the missing candidate for e-recruiting. Without a candidate you won't be able to work with the application.
    Check transaction SLG1. There should be an error "No candidate for User <your username>" or sth. similar.
    If so run report RCF_CREATE_USER to get a candidate. Then you should be able to log on.
    If you already have a candidate and cannot login check SLG1 and SM21 for error messages. If there are any but you don't feel able to solve the logged problem. Just post the message here. I think someone will be able to help.
    Best Regards
    Roman Weise

  • E-Recruiting 6.04 Problem in the option Create internal applications

    Hi,
    I have a problem in the Recruiter option u201CCreate internal applicationsu201D.
    When I try to find the personnel number of an internal candidate using the option search by first name and last name there is no results, and I have internal candidatesu2026
    I suposse that I have bad configurated any search templates, but I don´t know wich is used in this case.
    Could somebody guide me, please?.
    Best Regards,
    Esther

    Hi,
    I have been investigated about this problem and I have found that in this case not use a search template.
    This option uses the search help H_RCF_SHLP_EMPLOYEE_DETAIL. When I execute this search help in R3 all work ok, but when I try to search in the portal it doesn´t work...
    I don´t know what is the problem...
    Could somebody guide me, please?.
    Many thanks,
    Esther

  • Recruiting problem with the candidate search by trex with questionnaires

    Hi Gurus,
    I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
    When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
    But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
    In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
    Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
    In conclusion, I don't know how I can solve this problem with trex? Any idea?
    Thanks in advance,
    Juanjo Garcin.

    I've already done it.
    Do you think this will help?
    I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

  • Problem executing e-Recruitment Pages

    Hi SAPiians,
    We are implementing SAP e-Recuitment using BSPs. We are done with the configuration part and also configured the ALE.
    Also, generated the URLs using RCF_GENERATE_URLS. When i copy and paste the URL in a browser, the logon page pops up. When i enter the username(has all the e-Rec specific objects assigned to it) and password, it ends in a short dump. Below is the text:
    Note
    The following error text was processed in the system DER : Access via 'NULL' object reference not possible. The error occurred on the application server DV35_DER_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_HEADINCLUDE==========CP
    Method: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
    Method: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_HEADINCLUDE==========CP
    Method: IF_BSP_PAGE_CONTEXT~ELEMENT_PROCESS of program CL_BSP_PAGE_CONTEXT===========CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DER in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DV35_DER_01 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server DV35_DER_01 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: RCF_UNREG -l: E -s: DER -i: DV35_DER_01 -w: 0 -d: 20081017 -t: 145914 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
    The ST22 dump has following message:
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_HTMLB_HEADINCLUDE==========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" " "
    "CL_HTMLB_HEADINCLUDE==========CP" or "CL_HTMLB_HEADINCLUDE==========CCIMP"
    "IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
        SAP-Release 700
        Application server... "DV35"
        Network address...... "10.8.54.191"
        Operating system..... "SunOS"
        Release.............. "5.9"
        Hardware type........ "sun4u"
        Character length.... 16 Bits
        Pointer length....... 64 Bits
        Work process number.. 0
        Shortdump setting.... "full"
        Database server... "DV35"
        Database type..... "ORACLE"
        Database name..... "DER"
        Database user ID.. "SAPSR3"
        Char.set.... "C"
        SAP kernel....... 700
        created (date)... "Feb 3 2008 21:08:24"
        create on........ "SunOS 5.9 Generic_117171-13 sun4u"
        Database version. "OCI_102 (10.2.0.2.0) "
        Patch level. 146
        Patch text.. " "
        Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
        SAP database version. 700
        Operating system..... "SunOS 5.9, SunOS 5.10"
        Memory consumption
        Roll.... 16192
        EM...... 4189848
        Heap.... 0
        Page.... 16384
        MM Used. 2078976
        MM Free. 2108272
    User and Transaction
        Client.............. 200
        User................ "RCF_UNREG"
        Language Key........ "E"
        Transaction......... " "
        Transactions ID..... "48F75A37D7085D19E10000000A0836BF"
        Program............. "CL_HTMLB_HEADINCLUDE==========CP"
        Screen.............. "SAPMHTTP 0010"
        Screen Line......... 2
        Information on Caller ofr "HTTP" Connection:
        Plug-in Type.......... "HTTP"
        Caller IP............. "10.125.6.207"
        Caller Port........... 8001
        Universal Resource Id. "/sap/bc/bsp/sap/hrrcf_cand_reg/application.do"
    Source Code Extract
    Line  SourceCde
      106 **   Wednesday
      107 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20030101' IMPORTING week = week_num.
      108 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 8. endif.
      109 *
      110 **   Thursday
      111 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20040101' IMPORTING week = week_num.
      112 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 16. endif.
      113 *
      114 **   Friday
      115 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '19990101' IMPORTING week = week_num.
      116 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 32. endif.
      117 *
      118 **   Saturday
      119 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20000101' IMPORTING week = week_num.
      120 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 64. endif.
      121 *
      122 **   Sunday
      123 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20060101' IMPORTING week = week_num.
      124 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 1. endif.
      125 *
      126 *    sfirstweekcode = firstweekcode.
      127
      128 *   Get date format
      129 *    SELECT SINGLE datfm FROM usr01 INTO datfm WHERE bname = sy-uname.
      130 *    if datfm is initial.
      131 *      datfm = '1'.
      132 *    endif.
      133
      134     data: stylepath type string,
      134     data: stylepath type string,
      135          popuppath type string.
      136          stylepath = headinclude->mc_render_lib_d2_system->stylepath.
      137     popuppath = stylepath.
      138
    The error is at line 136.
    What could be the problem ?? I have done all the config related to e-Recruitment... Also activated most of the SICF services...
    Could something be pending from BASIS front ??
    Below are some of the keywords found in SM21 log.
    1. Run-time error "OBJECTS_OBJREF_NOT_ASSIGNED" occurred
    2. Task: 23834,
        Process:Dialog work process No. 001,
        Program: SAPMHTTP,
        Problem Class: Transaction problem,
        Package:SABP
    Module Name:abdata, Line:0430, Error text:ab_DataAddrRead
    Please guide...
    Thanks.
    Shashank Shirali

    Hi Friends,
    The problem is solved. The issue was with SICF service activation.
    Certain system services were not activated.
    Thanks,
    Shashank Shirali

  • Problem with Restricted Recruiter Requisition Status Change Approval Proces

    Hello,
    Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter.  The approval notification never appears in the Recruiters approval page.  The Restricted Recruiter is able to submit the request without any problems.
    I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
    Thanks for your assistance.
    Ryan

    I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful.  Upon running this utility I found 8 pending approval request tasks.  I double clicked on the task to show the workflow status of each task.
    I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########.  Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
    Doing this opened up a new web browser and prompted me to login.  Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
    Error in Web service execution
    E:SWF_HTTP:050 TS51807979
    At this point I am unsure of where to go...
    Any help would be appreciated.
    Ryan

  • Problem when created a requisition in e-recruiting

    Hello all,
    We are trying to crate a requisition in e-recruiting, but we have some problems:
    When the recruiter star search to select a position, the positions under an Org. Unit apperar with the same incumbent, for example: The recrutier search for the Org. Unit "XXXXX" and all the postion under this Org. Unit have the same incumbent. If the recruiter select one of these position, an internal error occurs. When we check the T.CODE SLG1, the message text for the error is: "No candidate could be found for US CIOTTA".
    So I have some question:
    1.- How to solve the problem (obviously)
    2.- In the normal, the incumbent of a position is the person who is sitting in the position?
    3.- where the system looks for this information (incumbent) in EREC system or in HR system (we have standalone instalation)
    Please I really need some help...
    Thanks for all
    E.Ciotta
    Regards

    Please help me with this problem

  • Problem to login into mySAP e-recruiting via webbrowser

    Hi,
    I did Google the whole web to find a solution for the following problem. I hope anyone of you can help me:
    We installed mySAP e-recruiting 300 with the actual service packs in our SAP-System (SAP ERP Central Component 5.0) using the integrated webserver 6.40.
    We did all of the necessary customizing.
    The problem is: When I like to login as an external candidate via the url I created with the report RCF_GENERATE_URLS the browser shows me the login screen. After I entered the correct login data the screen is showed again... and so on...
    It is possible for the user to login into the system via the SAPGUI. He has the role SAP_RCF_EXTERNAL_CANDIDATE.
    This problem occurs also when I tried to login as a internal candidate, administrator...
    The System works fine when I call the Candidate Registration (HRRCF_CAND_REG) all is working fine and a user is created in the system, which can create a application and can change his stetting. When I close the browser, the user is logged of.
    I already checked all OSS. The profile parameters login/accept_sso2_ticket and login/create_sso2_ticket of the Web Application Server are both set to 1. (according the OSS 595109).
    Does anyone has a solution for this problem?
    Thank you very much for your help.
    Philipp

    Hi everyone-
    It doesn't sound like an SP10 problem to me.  I've used SP10 on multiple systems and it works great every time.
    I've seen this issue before, but I can't remember what I did to resolve it.  I would suggest starting with the basics.  For example, go back into SICF and make sure all of the appropriate services are active and all of the necessary E-Recruiting services have the reference users assigned with the appropriate roles.
    Next, as was already mentioned, make sure the SSO flags are set.
    Lastly, feel free to provide an example URL, so that I can check my system and share the service logon details (obviously omitting your server name).
    Good luck
    Jon

Maybe you are looking for