E-Recruiting: Resume to be mandatory for candidate in WD scenario

Hi,
How can we make sure that a candidate uploads his resume while filling his profile or applying against a Posting in WebDynpro scenario?
FYI : we are running on EHP3.
I don't see any option provided in configuration too.
Is there a way that the whole attachments tab to be checked for inputs before a candidate releases his profile?

Hi suresh,
there is no solution in standard. Overall you cannot ensure that any required field is actually filled at all, if the applicant is not calling the roadmap step required fields have no effect. Only exception here are required fields in questionaires in the application wizard as they have a special handling.
You could make a "resume" attachment type and modify / enhance the send function and check if there is at least one attachment of this type. But this would be a customer adaption and as all attachments in the application wizard are candidate specific, this check could be passed on the 2nd application by an old resume from the 1st one.
Best regards
Roman

Similar Messages

E-RECRUITING OPEN SEARCH FOR CANDIDATE RECEIVING MULTIPLE ERROR LOGS IN SLG

E-Recruiting Netweaver 7.0 separate system
Non XI R3 system for HR
CL_HRRCF_CANDIDATE_ADMIN_BL error in search results
Hello,
Within the "Search for Candidates" page, when doing an open search, we only receive one candidate. Also with transaction code SLG1 there are multiple error logs stating that a candidate could not be found.
What does the error message mean and how do we resolve what is causing them? If resolved will we get a full open search within the "Search for Candidates" page?
Specific error: No candidate could be found for NA 50003803.
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 345.
Error class: CX_HRRCF_MAINTAIN_OBJECT
Appreciate any help,
Cindy

I have solved this issue.
Pass the logon data to the service for the external candidate registration
Do the indexing and configuire the SES objects and index as well.
Configure the missing entries in the serach profile/templates

E-recruiting: Change of the sender in reject e-mail for candidate

Hello!!
In e-recruiting 6.0 we needed modify the direction of the sender in reject e-mail for candidate (activity u201Cnotification rejectu201D).
At the moment, when a notification reject is sent, it appears the personal electronic direction of the recruiter who executes the activity (notification reject). The personal electronic direction (of recruiter) is registered in infotipo 105 subtype 0010.
It is required that the sender direction is a generic direction (for example: work_with_us@example).
¿How I can realise this change?
Thanks,
Alicia

Hi,
in addition to the two solutions already mentioned I'd like to throw in the following two options:
Instead of linking a workflow to every activity creation you could build an easy background job which runs once in a while sending the planned simple correspondences and invitations. The result would be the same as the workflow solution the sender is the user under which the job s planned.
More flexible as not hard build in and development free would be a solution using the open correspondences function. You create a dummy user with the work_with_us@example e-mail using report RCF_CREATE_USER. This user is used to send all open correspondences and invitations manually. Of course this is more processing steps for the recruiters but if you need flexibility this is the price to pay.
Kind Regards
Roman

E Recruiting-Display current holding position for the Internal Candidates

Hi
Is it possible to display current holding position for the Internal Candidates?
Thanks inadvance.

Hello,
Yes it is possible to display the employees current position. You did not however specify 2 things - where do you want to display the position and what version of E-Recruiting are you using.
From EhP4 there is a BAdi ERC_TRXLIST_CDCYL which you can use to enhance the lists of assignments to requisitions to also show the position for Recruiters. You will then configure the additional column in SPRO under nodes "Define Column Pool for Candidate Selection" and "Assign Columns for Candidate Shortlists". You can also copy and modify the smartforms for example HRRCF_CANDIDATE_PREVIEW for recruiters and modify to include the position and then configure the developed smartform. Position will be available in HRP1001 with a 008 relationship to CP object.
Regards

E-Recruitment -- Assign Columns for candidate shortlist

In the IMG, I try customize the IMG step, Assign Columns for Candidate shortlist".
When I select the process, and try customize, I do not see any columns displayed at all. This same for all process. Do I do other customizing step prior to this.
SAP Help has no information

Hello,
there should be a default customizing delivered for table T77RCF_CDCY_LIST which is the customizing table behind this IMG step.
I could imagine 2 reasons for seeing no entries. If you have already applied your customer customizing for processes and activities you might not see entries if you have used your own process IDs which differ from the default delivery. This could be easily checkt by having a look into the table using SE11 / SE 16.
If there are no entries in the table at all It might be that the content from the table was not transfered from client 000 into your work client during the client copy or after the upgrade / installation. So check the content of the table in client 000 or ask a basis guy if you have no access to this client.
Kind Regards
Roman

Regarding E-Recruitment Resume Parsing

Hi,
We are upgrading to E-Recruitment EHP4. In that for the External Candidate, the resume parsing function plays a major role and this can be done using a third party vendor. Can anyone suggest about the vendor for resume parsing or is there anyway that we can bypass this parsing and proceed further.
Thanks and Best Regards,
Vivek.

Hi,
I do not know any third party vendor I could recommend to you.
As I understand you want to deactivate this function, don't you?
Go to Technical Settings -> User Interfaces -> Candidate -> Backend Candidate -> Assign Values to Interface Parameters. Remove the X in the entry RSP_IN_UNREG_AWZD.
Regards
Sebastian

E-Recruitment 6.0 - SP8 Maintenance of Candidate Profile

Hi Experts,
I am currently implementing SAP E-Recruiting 6.0 SP 11 and understand that as of E-Recruiting 6.0 SP8, webdynpro is available for internal and external scenarios. From my testing, these scenarios refers to the case where an individual logs into the internet/intranet to apply for a job. But does this apply to the Adminstrator function where it creates/maintains the external and internal candidate profile?
Thanks in advance,
William

Hello William,
the information above is not correct. The Web Dynpro frontend is currently only available for candidates. When the candidate / applicant applies or logs in to update its data this can be done using Web Dynpro applications.
All functionality for recruiters and admins to maintain or access candidate information e.g. the minimum data entry where a recruiter can type in a hardcopy application or the application to check the applicant profile are only available in BSP. The report mentioned above only generates links to BSP appliction.
As a result if you want to enhance the profile with additional fields you will have to do this for Web Dynpro and BSP.
According to the last information available, SAP will deliver the first version of Web Dynpro frontend for recruiters with EhP4 which is scheduled to the end of this year. But as EhP3 was released in December 2007 and is still in Ramp Up I assume it will not be generally available before Q2 2009.
Best Regards
Roman Weise

Data transfer position for candidate

Hi Experts,
We are implementing ECC 6, E Recruiting. When we do data transfer activity for a candidate then we want to pull the position on which data transfer activity was done for candidate in a Z Report.
Can any one tell me in which info type position is stored for a candidate at which data transfer activity is done or it is not stored at all any where in data base.
Regards
Puneet

data is always stored anywhere, how would the system know what to show otherwise?
http://www.nicx.co.uk/attachments/File/Data%20Model%20&%20Infotypes.pdf

WBS element field mandatory for specific sales order

Hi Friends,
I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
Ratna

Hi,
As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
Hope this will resolve ur problem.
rgds
Dhiraj

Error Message FMBAS202 Year of cash effectivity mandatory for budget cat 9G

Hi all,
I activated BCS and use update profile 000350 (Separate PB/CB budget lines; standard), we tried to post simple FI posting and the error come up
==============================================================
Year of cash effectivity mandatory for budget category 9G
Message no. FMBAS202
Diagnosis
The FM update profile does not support the year of cash effectivity for commitment/actual values (posting ledger 9B). However, the year of cash effectivity is mandatory in BCS budgeting for budget category 9G and FM area 0100: the minimum value in this case is 2009.
System Response
Processing of the commitment/actual data record stops.
Procedure
Deactivate the year of cash effectivity for the corresponding budget category 9G and FM area 0100 in the IMG activity Choose Budget Category.
===============================================================
So I click the link and it goes to Define Budget Category screen where we assign budget category (9G) and time horizon (1) to a FM area, but not mention of deactivating year of cash activity.
My question is:
1. Where is the button to deactivate the year of cash effectivity?
2. What's the difference between budget category 9B and 9G? Both are Commitment Budget.
3. I dont remember assigning budget category 9B to an FM area. Where is the setting?
Thanks

Hi,
When you go to IMG - Public Sector Management - Funds Management Government - Budget Control System (BCS) - BCS Budgeting - Basic Settings - Definition of Budget Data - Choose Budget Category, what's the settings for 'Time horizon' field? It should be blank for 9G(commitment), if you don't work with cash effectivity.
9B is posting ledger, while 9G is budget ledger. You don't have to assign 9A/9B to FM area.
Regards,
Eli

Tax code field under INVOICE Tab to be Mandatory for Inter Company PO

Dear All,
In MIRO Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001.
How do we set as mandatory fields for those two intercompany document types.
Regards,
Teja

Hi
If u want to maintain tax code as mandatory field in PO?
Then SPRO- SAP IMG- MM- Purchasing - Purchase order- Define document types
In this check the filed selection key for the document types.
Then select the SPRO- SAP IMG- MM- Purchasing - Purchase order- Define svreen lay out at document level.
In this for the field selection key select GR/IR control and click on tax as required. and then save
It will not allow to create PO with out maintaoning tax code.
If u want to do tax code as mandatory in MIRO
Then Go to OLMRLIST and make changes accordingly.
Thanks
Raman

Freight Charges Mandatory for Particular Vendor?

Dear Experts,
i want freight Charges Mandatory for Particular vendor while creating PO in pricing conditions?

Hi
firstly check on whta keys you have maintained the condition records
if itis with various keys like vendor plant material etc , then check is it satisfying all???
now for your purpose just create access sequesnce with VENDOR (plant can be included ),
now delete all old records created for the fright condition
now assign this vendor in the Fright condition , also you can mark this condition as cant process manually if you dont want user to make any change to thsi condition )
create new record only specifying vendor as key point
now create Po and check
Edited by: Kunal Ingale on Jan 31, 2012 11:10 AM

What is true business proposition for SAP XI being mandatory for mySAP SRM

Hi,
Would like to know the true business/technical propostion which makes SAP XI the mandatory middleware for mySAP SRM business scenarios
1. Plan-Driven Procurement, and
2. Catalog Content Mangement
Appreciate a reason beyond single vendor/TCO dope we all know...
tnx,
renji

Hi Ranjan,
Solution Manager is not mandatory for SRM 7 implementation.
Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
It is just a guilde. All things might not be required for your project.
We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
Best Wishes,
Tushar.

Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

Account assignment mandatory for material

Hi,
While creating contract i am facing this warning message..i can ignore this message , but what is the root cause for it.
Error is :
"Account assignment mandatory for material 100000040 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category"
I checked Qty and value update in OMS2 also.
It is maintained.
Then what is wrong?
Uts

Hi,
Account assignment determination depend on the valuation class. When your account assinged category is mandatory in that case go and see the account modifier assigned in account assinged category. After that verify the G/L account in OBYC for key GBB and account modifier and respective valuation class assigned in material master.
If the entery does not exist then system will give you an error message.
Regards
Prashanth

E-Recruiting: Resume to be mandatory for candidate in WD scenario

Similar Messages

Maybe you are looking for