E-Recruiting- Scale for Questionnaires not apprearing

Hi
I have created a scale for Questionnaire in V_T77SK. On (E-Recruiting BSP screen) maintain the Question screen this particular screen is not appeared in drop down menu (against range). However, rest of the scales already configured are displayed.
Am i missing any link .

Hi Robin,
have you refreshed the catagories after creating your new scale? This is necessary to make the new scale available in the bsp.
The function is found in IMG under:
SAP E-Recruiting -> Recruitment -> Applicant Tracking -> Questionnaire -> Update Categories
Best Regards
Roman Weise

Similar Messages

Why not add a scale for accessing both scaleX and scaleY (class extensions in as3?)

I've considered and am suggesting there be a scale for both scaleX and scaleY (via a setter & getter function)
I think that one might get confused trying to get a value out of scale if scaleX and scaleY are different, but...
You could throw an error when using a variable scale (getter only) if they (scaleX&scaleY) are different, and return the value if they are the same.
It could throw more a warning and return the scaleX or scaleY or an average, and or possible have a policy (although again I can see this may seem potentially more confusing.)
I remember with ObjectiveC you could/can create a class extension that would extend a class that already exists pervasively like String.
This way you could alter functionality like this where all onjects have inheritend from a DisplayObject or whereever scaleX & scaleY are. Subclass as an Extension Class this deep lying class and add that kind of ability without needing to do it to all of your higher level classes (or other such tricks String Utility Classes etc.), which as I recall existed in ObjectiveC (and other langauges) no doubt because it was simply impossible to achieve the same effect any other way.
Is there such a way in AS3 to extend a class? Is it impossible for some reason?
May appologies if I've got the terminalogy wrong, please clarify if I'm searching for the wrong keyword on this thanks.
Anyway I still think putting something like
myCircle.scaleX *= 0.9;
myCircle.scaleY *= 0.9;
or
myCircle.scaleY = myCircle.scaleX *= 0.9;
or
myCircle.scaleX *= 0.9;
myCircle.scaleY = myCircle.scaleX;
is not as nice clean as
myCircle.scale *= 0.9;
would be. I think my thoughts on explaination for why and a simple possible selection of solutions (throw catchable/discargable errors/warning or alterable policies).

TCP has retry logic. The timeout period varies by OS and configuration. TCP will typically retry three times and wait for the timeout period to expire before reporting an error. I do not believe any OS will fail in less than two minutes with the standard timeout and some systems go to 5 minutes.

My ipod does not apprear in itunes with windows 7

my ipod does not apprear in itunes with windows 7 any ideas

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

Recruitment open for Upcoming Ramp-Ups: SAP BusinessObjects GRC 10.0 Suite

Recruitment open for Upcoming Ramp-Ups:
SAP BusinessObjects Access Control 10.0
SAP BusinessObjects Risk Management 10.0
SAP BusinessObjects Global Trade Services 10.0
SAP BusinessObjects Process Control 10.0
Key Data
   * Target Release to customer: 13th December 2010
   * Target Completion date Ramp-Up: 15th June 2011
   * Contact Persons: Petra Beenk (EMEA); Jennifer Ingle (North America); Fabiana Pacheco (Latin America); Allen Xiao (APA) Sawako Watanabe (Japan)
   * SAP Ramp-Up project responsible: Sabine Schoeler
http://service.sap.com/rampup
Cheers,
Vit
Edited by: Vit Vesely on Oct 23, 2010 9:32 PM

Hi Simon,
I appreciate your help.
It noticed by me that in the GRC 10 front end system, the component GRCFND_A_V1000 was not installed!!!
How this was missed I dont know. Inspite of this, other component GRCPINW_V1000_700 was installed.
Now I have figured out and installed the correct component and I can now activate the BC sets
Thanks for your rhelp again
Regards,
Faisal

Pricing condition record Scales for width

Hi,
Wanted your expertise, as we are trying to implement scale for a pricing condition as below. Please advise which scale type to be used I think we should use D as interval graduated scale, but my query is my width value stored in material master and once order read it should pick the price as per interval . Need to know when i select type D it should not do graduation in same sales order for other lines. I mean if order has two line item with same material and third line with different material. system should calculate first line price 0.09 and second line should also pick price 0.09 as width is within 0 to 1
third material should price 0.13
please advise how this is posible because i think gradutaion type adds previous line record value, which we don't want.
Mat 1 - 0.7 in
Ma t2 - 0.9 in
Mat 3 - 2.5 in
0.000 - 1.000 in 0.090
1.010 - 2.000 in 0.110
2.010 - 3.000 in 0.130
3.010 - 4.000 in 0.140
4.010 - 5.000 in 0.150
5.010 - 6.000 in 0.160
6.010 in 0.200
thanks
Niki

My order has quantity 1 and sales unit of measure is PAC and material base unit of measure is FT. As if now maintained condition record scale in FT for the width.
in additional data of material we have unit convertion as below
1     FT     Foot     <=>     1     FT     Foot                                                                                1.722     1.566     LB     1.000     FT
1,566     LB     pound, US     <=>     1,000     FT     Foot                                                                                0.000          0.639     FT
3,600     PC     Piece     <=>     54,600     FT     Foot                                                                                0.000          15.167     FT
100     PAC     Pack     <=>     54,600     FT     Foot                                                                                0.000          546.000     FT
                               <=>                FT     Foot                                                                                0.000
thanks

MM-PUR default scales for condition types for service (ME31K

Hi,
We have faced the following problem:
The business case was, to have default scales for certain condition types for a service for a purchasing contract.
We didn't find it in SAP, so we wrote an OSS. SAP answered that it's not possible now, nor in the future.
So we decided to look around in SAP, and found out that it was half possible.
I've abused the exit USEREXIT_XKOMV_BEWERTEN_INIT of program RV61AFZB.
In this exit I provide the internal table staffel for program SAPMV13A with the correct information (via ASSIGN ('(SAPMV13A)STAFFEL[]') to <staffel>.)
In this way, if a user adds a service, this exit will get reached and the scales are filled. If the user then clicks on conditions and then double clicks the condition type with the scales, all the default scales are shown to the user. If you then click on save, the next screen is the service screen, if you then click on save again, all the date is stored in the database. (bit of a work around, but this works)
However, I can't figure out how to save the scales data, when you only add a service and then push the save button without viewing the conditions. Quite logically actually because I'm skipping two whole screens with pbo and pai modules, in these modules internal converting takes place.
Has anyone encountered this problem before and how did you solve it then ?
Alternatively what is the SAP standard way to add pricing condition scales on condition types of a service of a purchasing contract? As you know there is no BAPI yet to change/create a purchasing contract.
I was thinking, to add the scales by updating the tables directly via ABAP, I know that's not a clean way to do it, although it isn't too risky.
Kind regards, Rob Dielemans

Dear Rob,
Is this solution properly working for you?
I think my problem is similar: purchasing outline agreement (contract) refuses to apply relevant scale prices in the item line. Always uses the first price - without considering order quantity depencies.
Regards,
Tamás
Edited by: Tamas Szabo on Mar 31, 2009 3:50 PM

Dashboard scales for Incoming and Outgoing

Is it possible to make scales for Incoming and Outgoing messages the same?
Now it looks unnatural. See the picture: outgoing messages seems less than incoming (which is, of course, is not the case).
Understood, there are several metrics on one graph (counters, sizes, etc.). But it is really confusing if incoming and outgoing message counters in queue have different scales. (BTW It is not related to the error messages).
Leonid Ganeline [BizTalk MVP]

Hi Leonid,
Thanks for your feedback.I will report this issue and post back.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Questionnaire not in HTML mode (t-code BBP_EVAL_SURVEY

Hi Expert,
I use SRM 7.0
I have question for mode HTML in Questionnaire (t-code BBP_EVAL_SURVEY).
I have case, my recipient cannot access Questionnaire in HTML mode, what should i do?
Any setting for HTML/not HTML mode in Questionnaire?
Need your response...
Thanks and regards,

once you start the transaction --> BBP_EVAL_SURVEY --> click on display for any of the available surveys , system will take you to details of the survey.
then click on the button --> Display Questionnaire
system will display the structure , and in the top , you will find two buttons' Expert Mode On' ' HTML mail Off' , click on the button 'HTML Mail off' and it will change to 'HTML mail On'.
and save the changes you have done and test. Hope it works.

2-dimensional scale for a pricing condition

Hi,
Need your Expertise please. We would like to implement 2-dimensional scale for a pricing condition.
We have found a decision as use Reference condition type (RefAppl 'F').
It works but we can't define Condition base value for the determination of value according quantity of item.
Could you advise the decision... ?
Thanks,
Andrew

Hi there,
The base value can be set only for the maim condition type and not for the reference condition type.
thanks
Shanker

Percentage Scale for Appraisal

Hi all,
Good DAy!
I want to know how system will calculate the result in percentage.
The Senario is as follows:
1. each criterian has 10 points On Scale (1-10)
Suppose there is 2 criterian so the system should calculate like
If the total of two criterian is 15:
15/20*100 = 75
The system should give 75 as a result for this, but in my case it is not happenning.
I have created two scales for this:
1. 1-10 value scale (Quality) weight 1
2. 1-100 value scale (quality)
I have assigned each criterian 1-10 value scale and calculation is percentage based but it is not giving me the correct result.
because system is calculating like - (Weight * Rating)
Please suggest me the solution for this.
Thanks & regards,
Neeta

Dear Sikandar,
I Check with my ABAPER this is not possible
Please advised
Regards
MHPO

How to include scales for delivery schedule.

Hello,
How to include scales for delivery schedule.
a.       Example u2013 I have a total SA for 10000 EA for Rs 10 EA
                                                               i.      When SA line And GR is for 0-100 system should take Rs 10 EA
                                                             ii.      When SA line and GR is for 101-1000 System should Rs 9.50 EA
                                                            iii.      When SA line and GR is for 1001-5000 system should take Rs 9.00 EA.
Normaly SA will calculate Scales based on target qty, not delivery schedule qty?
Regards
sapman man

Hello SAPman man ,
Please read SAP Note 401941. This could be helpful depending on what Release you are running.
SAP Note 401941 - Incorrect price at time of GR
I hope this information has been helpful for you.
Best Regards,
Frank

Illustrator scale tool is not working

Scale tool in my illustrator is not worrking. How can I solve this problem?

Hi
I made 3rd step and most of the functions lost from the menus
iPhone'umdan gönderildi
15 Mar 2014 tarihinde 12:27 saatinde, "Jacob Bugge" <[email protected]> şunları yazdı:
Re: Illustrator scale tool is not working
created by Jacob Bugge in Illustrator - View the full discussion
nurcan,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6211732#6211732
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6211732#6211732
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6211732#6211732. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why do I receive Error 200378 "Custom scale specified does not exist"?

I am trying to perform offset nulling using an NI-9237. I receive and error in regards to the custom scale even though I programmatically create the scale prior to the task. I am experiencing the erro whne using LV8.2.1 but with LV8.6 the problem disappears (same code, just open in LV8.6 and run)
The error is the following:
Error 200378 "Custom scale specified does not exist"
Possible reason(s):
Measurements: Custom scale specified does not exist. Custom Scale: test
Channel Name: LoadCell_StrainGage_Sim/ai0
Task Name: _unnamedTask<F>
I have attached the code in LV8.2.1
Thanks
Dan
Attachments:
test.vi ‏38 KB

Dan,
I tried your VI and it worked for me after I changed the channel from "LoadCell_StrainGage_Sim/ai0" to something that was on my system. Before that, I got the same error. So...are you sure that there is LoadCell_StrainGage_Sim/ai0 configured in MAX? Stupid question, I know, but it was the only thing I changed.
-Matt
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Anyone used Scala for a medium project?

I'm just starting to teach myself Scala and I'm wondering if anyone here has used Scala for a medium projects (something that took more than a weekend but not more than a few weeks) ? I'm not sure what sort of programs I would use Scala for. I use C for all my lowlevel bit pushing and Python for just about everything else (including art generators and a clone of Jekyll). What itch do Archers scratch with Scala?

I find clojure to be a more interesting jvm language than Scala, personally.
*shrug*

Computing an appropriate division scale for pow with negative arguments?

private static BigDecimal pow(BigDecimal bd, int n) {
return n < 0 ? BigDecimal.ONE.divide(bd.pow(-n), _ARBITRARY_NUMBER_ , BigDecimal.ROUND_HALF_UP) : bd.pow(n);
}Rather than plugging in an arbitrarily large number for the scale in the division operation, I would like to try to set the value appropriately. I tried simple formula that basically mulitiplied bd * n / 10, which worked nicely for some values, but gave overly large values for others.
Based on the data that I expect to process I think I could set it to 3000, but I would prefer not to take the risk, and it's just plain stupid to make all calls to the function pay the penalty.
Is there a algorithm that could approximate the value of what the final answer will be so I can plug an appropriate value into the scale?

Is there a algorithm that could approximate the value of what the final answer will be so I can
plug an appropriate value into the scale? You don't need a scale for the pow operation, so first do BigDecimal recip = bd.pow(-n)Now the final answer is 1 / recip, so the scale is roughly -log10(recip). Google BigDecimal logarithm and you'll find a few open source libraries which can do that stage. (In fact IIRC you'll find a library which does arbitrary powers of BigDecimals).

E-Recruiting- Scale for Questionnaires not apprearing

Similar Messages

Maybe you are looking for