E-Recruiting Status text change

Hi,
My client is inquiring about the level of effort involved in changing the status titles (ex. Rejected to Not Hired), table T77RCF_RCD2STAT is used to assign status reasons to statuses. Can you please assist me at where the change would need to be made and what the level of effort and impact of this change would be?
...Naddy

Hi Naddy,
the status texts are domain values. So to change the texts you would have to do a modification on the domain.
The dpomain names are like the names of the data elements: rcf_<object>_status while object is requisition, application, candidacy, ... .
As long as you only change the texts and not change the allowed values i don't see a lot of impact. Off course with each support package / upgrade you would have to check the change as you do for each modification.
Another effort which might be necessary is to check OTR text and messages if anywhere SAP put the status description in. This would have be to be checked and if found would have to be adapted.
Best Regards
Roman Weise

Similar Messages

  • How to Change  status text in ESS travel managemnet screen

    Dear All,
    What is the procedure to change the status/processing status text change in travel management  ESS screen.
    Regards,
    Palia

    Hi Pailia and all,
    I am with a client who has the same requirement (to customise the standard "processing status" wording which is shown against each trip in the ESS screen).  So far, I have not been able to identify where these texts can be changed.  If anyone can help that would be much appreciated?
    Many Thanks,
    Jack

  • Status text error

    Hi all,
        I need help in resolving this issue. When viewing a production order status in COOIS transaction, I am getting a popup information message " Status text for object ORXXXXXXXX in order XXXXXXXXXX could not be determined". After that in the next screen (Order Information system), if i try to save that order, program terminates giving a runtime error "Message_type_X". Someone help in this regard.

    Hi,
    For changing the user status you can use this function module.
    STATUS_CHANGE_EXTERN.
    Hope thsi will help.
    Regards,
    Swarna Munukoti.

  • Error in MSS Recruitment Status Overview

    Hi All,
    We are In the process of Upgrading from ECC 5.0 to ECC 6.0.
    In the Manager Self Service we are getting an error in the Recruitment Status Overview Iview
    Below is the error
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFC_Fault_Exception: Fault name: ORGVIEWGRP_NOT_FOUND, fault text: ORGVIEWGRP_NOT_FOUND
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
         at java.lang.Class.newInstance0(Class.java:308)
         at java.lang.Class.newInstance(Class.java:261)
         at com.sap.aii.proxy.framework.core.JcoMarshaler.unmarshalException(JcoMarshaler.java:429)
         at com.sap.aii.proxy.framework.core.JcoProxy.send(JcoProxy.java:79)
         at com.sap.aii.proxy.framework.core.AbstractProxy$JcoProxyHelper.send(AbstractProxy.java:173)
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:141)
         at com.sap.xss.ser.oadp.model.OADPModel.hrwpc_Rfc_Oadp_Get_Orgviewgrp(OADPModel.java:476)
         at com.sap.xss.ser.oadp.FcOADP.callHrwpc_Rfc_Oadp_Get_Orgviewgrp(FcOADP.java:4037)
         at com.sap.xss.ser.oadp.FcOADP.updateOrgViewGroup(FcOADP.java:3642)
         at com.sap.xss.ser.oadp.FcOADP.createDataFromOrgViewGroup(FcOADP.java:1680)
         at com.sap.xss.ser.oadp.wdp.InternalFcOADP.createDataFromOrgViewGroup(InternalFcOADP.java:829)
         at com.sap.xss.ser.oadp.FcOADPInterface.createDataFromOrgViewGroup(FcOADPInterface.java:862)
         at com.sap.xss.ser.oadp.wdp.InternalFcOADPInterface.createDataFromOrgViewGroup(InternalFcOADPInterface.java:782)
         at com.sap.xss.ser.oadp.wdp.InternalFcOADPInterface$External.createDataFromOrgViewGroup(InternalFcOADPInterface.java:1440)
         at com.sap.xss.ser.oadp.VcOADP.createDataFromOrgViewGroup(VcOADP.java:1358)
         at com.sap.xss.ser.oadp.wdp.InternalVcOADP.createDataFromOrgViewGroup(InternalVcOADP.java:978)
         at com.sap.xss.ser.oadp.VcOADPInterface.createDataFromOrgViewGroup(VcOADPInterface.java:1059)
         at com.sap.xss.ser.oadp.wdp.InternalVcOADPInterface.createDataFromOrgViewGroup(InternalVcOADPInterface.java:570)
         at com.sap.xss.ser.oadp.wdp.InternalVcOADPInterface$External.createDataFromOrgViewGroup(InternalVcOADPInterface.java:2133)
         at com.sap.pcui_gp.isr.statusoverview.VcISRStatusOverview.onBeforeOutput(VcISRStatusOverview.java:288)
         at com.sap.pcui_gp.isr.statusoverview.wdp.InternalVcISRStatusOverview.onBeforeOutput(InternalVcISRStatusOverview.java:167)
         at com.sap.pcui_gp.isr.statusoverview.VcISRStatusOverviewInterface.onBeforeOutput(VcISRStatusOverviewInterface.java:143)
         at com.sap.pcui_gp.isr.statusoverview.wdp.InternalVcISRStatusOverviewInterface.onBeforeOutput(InternalVcISRStatusOverviewInterface.java:136)
         at com.sap.pcui_gp.isr.statusoverview.wdp.InternalVcISRStatusOverviewInterface$External.onBeforeOutput(InternalVcISRStatusOverviewInterface.java:212)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Kindly suggest me.
    Regards
    Sivaprasath N

    I'm really not into the ESS/MSS area, but the message
    ORGVIEWGRP_NOT_FOUND
    sounds like missing configuration after the upgrade.

  • Status keeps changing from invisible to online: why the issue is ignored?

    There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

    Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

  • Blocking long text change if open PR and open PO found for material

    Dear SAP MM Gurus,
    Our client is having one requirement. Their requirement is like this,
    If there is any open PR, PO, contract etc. for a material ,  system should not allow to change the long text of the material.
    Is there any way out. Any user exit or BADi, which will trigger on the long text change of material master then please let me know.
    Thanking you.
    With Regards,
    Mihir

    Dear SAP MM Gurus,
    Our client is having one requirement. Their requirement is like this,
    If there is any open PR, PO, contract etc. for a material ,  system should not allow to change the long text of the material.
    Is there any way out. Any user exit or BADi, which will trigger on the long text change of material master then please let me know.
    Thanking you.
    With Regards,
    Mihir

  • Why status is change every time after execution of VI??

    Hello,
    I am not much familiar with Modbus communication,
    I got one problem regarding to Modbus that when ever run my vi then after execution the status of DO3 is always changed and jump to the Alarm mode.
    In attachment I have attached my screen shots you will get more clear Idea about my problem.
    In LHS there is software window and before connection that software with instrument normally I set my DO3 at status mode but when I run my vi in order to check the supply voltage and after execution when I again connect that software then DO3 status always change and its come to Alarm mode.
    Can you tell me that why its happen so??
    and what kind of changes I have to do in order to avoid this problem....
    Thank you  very much.
    Attachments:
    DO3.png ‏386 KB

    ok this problem is solve now that i have to make read holding register instead of write...
    but still I am confuse about the mesurment of voltage generally i have to set like 
    1) when (Do3 and datalogger switch both are closed) wired is connected with DO3 and relay on data logger is closed then its shoud show me voltage less then 2V,
    2)DO3 is open and datalogger is connected then voltage shoud be near to V+ (12v in my case)
    3)both are open then output shoud be 0V
    4)datalogger is open and DO3 is closed then voltage shoud be V+
    and in above four case i have problem in 1st case only...other 3 are working OK
    will you please guide me that is ther any change I have to do in data logger and what king of settign I have to to in order to get desired Output.
    I am not much familier with Data logger,i have read datasheet regarding to this and i am using Agilent Data logger 34970A.
    Thank you very much... 
    Attachments:
    MeasureDO3.vi ‏33 KB

  • How to restrict header text changes in sales order level

    Dear Experts,
    how to restrict header text changes in sales order level change mode
    thanks

    Hello Chandu,
    how to restrict header text changes in sales order level change mode
    In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
    Please try out this approach and let us know your latest observation on this issue.
    Regards,
    Sarthak

  • [svn:fx-trunk] 10075: Cleanups from the spark text changes and some bug fixes for VideoElement.

    Revision: 10075
    Author:   [email protected]
    Date:     2009-09-08 18:01:58 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Cleanups from the spark text changes and some bug fixes for VideoElement.  Also some PARB changes for UIComponent.
    TitleBar: Changing the skin part type from Label to Textbase
    UIComponent: skipMeasure()->canSkipMeasurement() to be in line with GraphicElement.  This has been PARB approved.
    UIComponent: same with hasComplexLayoutMatrix...this replaces hasDeltaIdentityTransform.  This has been PARB approved.
    StyleProtoChain: cleanup around what interfaces to use
    TextBase: clean up code that?\226?\128?\153s no longer needed.
    VideoElement: Fixing 4 bugs:
    SDK-22824: sourceLastPlayed keeps track of what video file we?\226?\128?\153ve called play() with last.  This way if a user pauses the video and wants to start it up again at the same point, we can call play(null) on the underlying FLVPlayback videoPlayer.  However, anytime the souce changes, we want to null out sourceLastPlayed.  This was causing a bug when someone set the source to null and then reset it to it?\226?\128?\153s previous value.
    SDK-23034 (GUMBO_PRIORITY): This deals with some FLVPlayback quirks around sizing.  I had put in a fix so we weren?\226?\128?\153t setting width/height on the underlying videoPlayer too many times, but apparently we need to make sure it always gets called once.  Hopefully when switching to Strobe we can cleanup this logic...I put a FIXME in to do this.
    SDK-21947/ SDK-22533 - some video files don?\226?\128?\153t always send out a metadata event.  I?\226?\128?\153m not quite sure why this is, but in case this happens, we do a check in the ready handler to see whether we should call invalidateSize() to make sure it gets sized properly.
    QE notes:-
    Doc notes:-
    Bugs: SDK-22824, SDK-23034, SDK-21947, SDK-22533
    Reviewer: Glenn, Corey
    Tests run: checkintests, Button, GraphicTags, VideoElement, and VideoPlayer (some VideoPlayer were failing, but I think it should be fine)
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22824
        http://bugs.adobe.com/jira/browse/SDK-23034
        http://bugs.adobe.com/jira/browse/SDK-21947
        http://bugs.adobe.com/jira/browse/SDK-22533
        http://bugs.adobe.com/jira/browse/SDK-22824
        http://bugs.adobe.com/jira/browse/SDK-23034
        http://bugs.adobe.com/jira/browse/SDK-21947
        http://bugs.adobe.com/jira/browse/SDK-22533
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
        flex/sdk/trunk/frameworks/projects/spark/src/mx/core/UITLFTextField.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Group.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Skin.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TextBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AddActionInstan ce.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/RemoveActionIns tance.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

  • SM58 status text " No service for system SAPERP, client 800 in integr "

    In Idoc to file scenario:
    i have fallowed this blog to configure ALE settings
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I have generated one idoc successfuly from sap r/3 system.
    but i didn't find any idoc in xi server.
    control records are
    receiver:A000000036,(RFC DESTINATION->LS_XI_100( Remote login sucessful for xi system))
          LS_XI_100
          LS
    Sender: SAPERP
         LS_SAP_800
         LS
    ID: Adapter specific identifiers are( LS->LS_SAP800, R/3->ERP,CLIENT,800)
    so i have gone to tcode sm58 in sap r/3
       where i found the status text "No service for system SAPERP, client 800 in integr)
    Please help me from this problem.
    Regards,
    Deviprasad.

    Hi Deviparasad,
    please create a techincal system and busniess system of type ABAP in XI SLD if you have already created the techincal system and busniess system  then check whether client 800 is used or not if include client 800.
    please reward points
    Regards
    Sreeram.G.Reddy

  • Prevent update to document after status is changed

    Hi all, I configured a new status profile for a sales document ITEM and want to stop user from editing the item once the status is changed to 'Close'. I have tried with Business Transaction 'Edit' (forbidden is set) and 'No Change Allowed' (allowed is set) but the system still allows me to update the sale item. These are the business transaction configured under Transaction Control. Can I find out what other areas I might have missed out?
    Please note that with or without the configuration of the business transaction to block updates, the system will close off certain fields for update, e.g. Quantity field.
    I know my last resort is to use the BADI but I understand that this is achievable via configuration but it somehow did not work for me. I read in other posts that people mentioned about 'Change document' but I cannot find this transaction in the list given in the configuration.
    Lastly, just wondering whether the business transaction field for 'User Status Triggers Business Transaction' has any impact on what I am trying to achieve? I have assigned 'FINI' in this case.
    Appreciate any advice on the above.
    Cheers!
    SF

    Hi Christophe,
    Re my statement "One thing I do not understand is why am I not seeing the business transaction for Change Document?" - I meant when trying to maintain the business transaction through the transaction control screen of the status. Example:
    The transaction control screen:
    When I click the New Entries button, I get this list to work on:
    I scrolled through the list and could not find 'Change Document' (CHCG). Does that make sense?
    I will have a closer look at the status analysis and see whether there is anything I can find.
    Cheers
    SF

  • Is there an inexpensive Adobe product that can make small text changes in an InDesign document?

    I run a small nonprofit where one of our staffers uses InDesign to design our documents. I often make small text changes and would rather not have to run them through her all the time. Is there any inexpensive Adobe product that would met me make these small changes, since I don't need the full Creative Suite (or even full InDesign) capabilities?

    You say that you want an Adobe product, but you may not be aware that
    there are other products that may work for you as well, in particular
    DocsFlow or WordFlow (EmSoftware -- no affiliation to me!)
    This would allow your designer to export the story to Word or GoogleDocs
    where you make your changes -- and he or she then simply updates the
    document in InDesign with the press of a button.
    Worth looking into.

  • Status Profile : Status not changing in CRM

    Hi Gurus
    Created order with  header status as  as " In process" ,  item status is defaulted  to  " open"  and  order  replicatd to ECC ,  billed aswell .  But  when I checked in  CRM still status  not changing to completed  but retains with In process  at header level & open at item level.
      I would expect order status should be completed at header level & Item level.
    Is there any thing wrong with status profile settings at header  & Item level? , I have created  status profiles with following settings.
    I have  copied standard status profile  " CRMORDER" and assigned to  trasaction type  and made following settings:
    Under Open :   following transactional contorl selected
    To be distributed   :  Selected options "Forbidden " & No active
    Under In process: 
    In process : Selected options " Allowed " & Set
    Undo Rejection :  Selected options " No infulence " & Set
    Under Completed:
    Complete :  Selected options " Allow " & Set
    Created status profile for Item  i.e. copied standard CRMORD_i  and made following changes:
    Under Open : No transaction control selected
    Under In Process : 
    Edit :  Seleted options " No influence" & Set
    Undo Rejection : Selected options " No Influence & Set
    Under Completed:
    Completed :  Selected options " Allowed & Set"
    Rejected :  Selected options " Allowed & Set"
    Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping  Business activity reasons to order reasons in ECC.
    Is any thing i am selecting wrong options in status profile at header level & item level?  Much appricieated for solution.
    Thanks
    shash

    Hi Gurus
    Created order with  header status as  as " In process" ,  item status is defaulted  to  " open"  and  order  replicatd to ECC ,  billed aswell .  But  when I checked in  CRM still status  not changing to completed  but retains with In process  at header level & open at item level.
      I would expect order status should be completed at header level & Item level.
    Is there any thing wrong with status profile settings at header  & Item level? , I have created  status profiles with following settings.
    I have  copied standard status profile  " CRMORDER" and assigned to  trasaction type  and made following settings:
    Under Open :   following transactional contorl selected
    To be distributed   :  Selected options "Forbidden " & No active
    Under In process: 
    In process : Selected options " Allowed " & Set
    Undo Rejection :  Selected options " No infulence " & Set
    Under Completed:
    Complete :  Selected options " Allow " & Set
    Created status profile for Item  i.e. copied standard CRMORD_i  and made following changes:
    Under Open : No transaction control selected
    Under In Process : 
    Edit :  Seleted options " No influence" & Set
    Undo Rejection : Selected options " No Influence & Set
    Under Completed:
    Completed :  Selected options " Allowed & Set"
    Rejected :  Selected options " Allowed & Set"
    Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping  Business activity reasons to order reasons in ECC.
    Not sure whether i am  selecting wrong options in status profile at header level & item level? 
    Plz help me on this.
    Thanks
    shash

  • On text change trigger in oracle forms 9

    I want to simulate on-text-change trigger similar to the one present in java and other programming languages.
    I need this trigger to be invoked when ever we change some text in the textfield.
    Is there any way to do this?
    I used two text fields to compare the last entered and newly typed based on a timer interval of 3secs
    But my problem is Oracle trims the spaces present in the textfield and also highlights the text present in textfield when ever I enter a space....
    Scenario : I want to use this trigger and refresh the search results based on the text present in the textfield.
    Thanks in advance

    To do the kind of thing you are talking about you will need to implment a Java Bean in your form listen for the changes. Take a look at KeyEvent Java Bean or the Oracle Forms PJCs-Java Beans web site for more information and examples.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Confirmation status is changed

    Hi Folks.I am working on SNC7.0.I created New PO and then iam confirming PO.While click on save button confirmed status will be CONFIRMED but after click on publish button confirmed status is changed to NOT CONFIRMED.These changes are in Po details screen.In that PO header General tab.
    Any suggestions how to resolve this issue.
    Thanks in advance.

    Hi Srinivas,
    In path:SPRO>Supply Network Collaboration>Basic settings>Validation>Own setting you will not get any values(even if you press F4 also).
    There is no check here if you enter any junk value also system will save.
    As i suggested earlier you need to maintain validation setting manually(do not press F4).
    Save the validation setting as suggested and recheck now.
    About validation check PO_CONF_RELEVANCE_CTRL :"Set Confirmation Status for Changed PO Item to "Not Confirmed"
    If this validation check is active, SAP SNC sets the confirmation status of a purchase order (PO) item to Not Confirmed if the customer has changed the following item data in the customer back-end system and has sent the changed PO to SAP SNC:
    ■Goods recipient
    ■Ship-to location
    ■Product
    ■Requested delivery date
    ■Incoterm
    ■Price
    Validation check PO_CONFIRMATION_DELETE:"Delete Confirmation Schedule Lines for Changed Purchase Order Items"
    If this validation check is active, SAP SNC deletes the confirmations schedule lines of a purchase order item if the customer has performed a change that requires confirmation by the supplier. Changes that trigger deletion include the following: Quantity changes and the changes listed in the description for validation check PO_CONF_RELEVANCE_CTRL
    Regards,
    Nikhil

Maybe you are looking for