E-Recruitment EHP4 Ext Cand Pages Logo and theme

Hi,
I am running e-Recruitment EHP4 SP4 and I want to change both the logo on the applicant cockpit page and also the colours and fonts (theme). Has anyone done this before, or can anyone suggest how this is done?
Any help would be greatly appreciated.
Cheers
Tom

Hello,
Please check SAP Note 1017866. It explains what is required to apply your own themes and logos for SAP e-Recruiting WebDynpro for ABAP candidate scenarios - i have pasted the relevant sections below for you:
Themes
To start Web Dynpro applications concerning a certain theme, you can use "sap-ep-themeroot" URL parameter. Enter the encoded path to the location of the theme as the value of the parameter. Certain Web Dynpro applications are called using a redirect handler. In this case, you do not have to enter the theme as URL parameter. It is sufficient to define the path for the parameter THEME_URL in the back-end system in the Customizing activity "Defining URL parameter for applications with Web Dynpro ABAP".
Logos
By implementing Note 1091733, you have the option to integrate logos above the application title using a specific configuration. The note enables you to integrate logos in the following areas:
.> Unregistered search
> Apply Using Reference Code
> Application wizard
> Registration
You must create an application configuration and a component configuration for the relevant application. As part of the component configuration, there is a configuration controller with the node 'LOGO' for the following Web Dynpro components:
> HRRCF_C_SEARCH_UI: Unregistered search
> HRRCF_C_REFCODE_SRCH_UI: Apply Using Reference Code
> HRRCF_C_UNREG_APPLWZD_UI: Registration page for the application wizard
> HRRCF_C_REG_APPLWZD_UI: Application wizard
> HRRCF_C_REGISTER_UI: Registration
This configuration controller has the following attributes:
> VISIBLE: The logo is visible
> URL: URL of the logo picture
> HEIGHT: Height of the picture
> WIDTH: Width of the picture
In contrast to the abovementioned applications, you do not call the application wizard explicitly but only indirectly (for example as a search result). Here, you can only define the application configurations that you want to use by implementing the BAdI 'HRRCF00_DETERMINE_APPL_CONFIG' (enhancement spot HRRCF_APPLICATION_WIZARD).
Regards,

Similar Messages

I have bought pages and it all was going well until I downloaded the update. Now my files (which are mainly brochures) won't show the pictures in opening screen. So I have over fifty documents and they all show the pages logo on them instead of the pics

I used pages for brochure documents and copied pictures to them, after I downloaded the upgrade the documents only show the pages logo on the pages from the opening screen. Once you click on them the pictures appear but it takes me ages to do this so they all show. HELP

Tupelo, there are many, many threads here in the Apple Discussions about the many issues with Pages 5, and the multitude of features that have been lost in this supposed "upgrade." Like Jerry, I'd recommend you get yourself back to Pages 4.3 until Apple comes to their senses.
So...first off: do you have Pages 4.3 still installed? If you do, it will be in an iWorks '09 folder in your Applications folder. If you bought Pages 4.3 on its own from the App store, your copy of Pages 4.3 will have been overwritten by the new Pages 5.
If you don't have the iWork '09 folder in your Applications folder, do you have a backup with it installed there? If so, you'll want to revert to that version. I believe that you can drag and drop the older version of Pages (and Keynote and Numbers if you have those as well); I'd recommend that you create a folder called "iWorks '09" in your Applications folder and stick them in that.
Also, if you have a reasonably current backup, you will be able to recover your documents created in Pages 4.3. Whatever you do, do NOT open them in Pages 5 - once you do, the features you may have used will be gone and reverting won't recover them.
You may also be able to revert to earlier versions, once you get Pages 4.3 back on your HD/or locate it and so you can use it to open Pages documents. In order to try that, in Pages 5, go to File->Export->Pages 4.3 document and then close Pages 5, and open Pages 4.3. Open the document you just exported. Now go to File->Revert and see if you can find an earlier, pre-Pages 5 version. If you can do that, you should be able to fairly painlessly recover all your messed up docs. Of course, if you have a current backup, it may be faster to simply recover the undamaged originals from the backup.
Pages 5, if installed on your system, will be the default for opening all .pages documents. You therefore have to do something to prevent that (Get Info and Change All won't stick). Either move Pages 5 entirely off your HD (and to move it, you'll need to put it into the trash first, as simply dragging it somewhere just creates an alias - once you drag it into the Trash, you can drag it to an external drive, for instance) OR you can create a disk image by sticking it in a folder and then using Disk Utility->File->New->Disk Image from Folder. Toss the Pages.app (v 5) in the trash and then any time you want to open Pages 5, simply click on the disk image. It turns itself back into a disk image when you quit. And it won't be the default app for .pages docs when it's a disk image. Or you can simply toss Pages 5 in the Trash entirely. The only reason I've kept my iWork 2013 apps as disk images is in case Apple actually does upgrade them to recover the lost features and perhaps changes its freebie policy along the way. Or...someone might send me a Pages 5 document. They can't be opened in Pages 4.3, so I'd need it then.

Page properties and logo missing after renaming folder

When renaming one of my folders I got the message that the
application is updating all links. The renamed pages look normal on
my desktop when viewed in a browser. I uploaded the renamed folder
to my website and found to my chagrin that the page logo and page
properties are missing. I had changed nothing else in the website
files or folders. Can anyone tell what went wrong?

You renamed a folder and didn't upload your images into the
renamed folder.
For example, you say your logo would be here -
http://www.onejackdaw.com/My_NA_Birds_Gallery/content/logo.png
but it's actually still here -
http://www.onejackdaw.com/My%20NA%20Birds%20Gallery/content/logo.png
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ian370" <[email protected]> wrote in
message
news:g1a5u1$nhb$[email protected]..
> This was the old link:
>
>
>
http://www.onejackdaw.com/My%20NA%20Birds%20Gallery/Yellow_Warbler_Common_Grackl
> e.html
>
> and this the new one:
>
>
>
http://www.onejackdaw.com/My_NA_Birds_Gallery/Yellow_Warbler_Common_Grackle.html
>

E-Recruiting EhP4 -- Management Involvement

In E-Recruiting EhP4, a manager can identify and make substitutes in the application. What can these substitutes do. Using their log-in (into MSS), can these substitutes be able to see the managers ranking (for example) and maintain them

Hello,
The substitute maintained by the manager is the one who assume his responsibility in E-rec when he is absence.
The E-recruiting manager role can do two things:
--> Create Requisitions
--> Maintain Substitutes
Please have a look at the following documentation for further details:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/48/99a0c399273987e10000000a421937/frameset.htm
Regards,
Bentow.

Logo and NavBar

Is there a way to remove application logo and navigation bar for a certain page without using Printer Friendly? For other pages, logo and navigation bar will stay.
Thanks,
Yivon

In order not to display navigation bar for few pages.
Click on Navigation Bar link of the right bottom side of any Page.
Click on Condition TAB.
Select the condtion : Current Page != Expression 1
and in expression1 enter 1 , 2
it will not display Navigation bar in page 1 and 2

How do you apply 2 different types of page (first with large logo and 2nd/follow with small) in the same document?

i´m using pages 5.1 and i need 2 different types of page in 1 document: first page with large logo and second with a small one. in pages 09 was a option for different first page ...

that's not my problem, and I am unfortunately not a professional. Sorry.
In Pages09 there was an option "Different First Page" (like MS Word). I could create different pages (first and second) with two different logos and text boxes. If the document was opened, there was only one side with the large logo. during writing the small logo and the other text boxes appeared on the second page (and subsequent pages).
Unfortunately I miss this function. I mean the inclusion of items on a second page. However, this must not necessarily be active.

Floating logo and pages off centre?

Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

hi,
try giving left and right margin : auto ;
to ur main div tag. not like 30*px and any value,,and u will see ur page wil be in center in all browser. and
have u used external css,,? if not, we have to reset all tags first b4 proceeding further work , in html
hope i was rite
best
whitsunday lad wrote:
Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

How to insert company logo and page number on every page except the first page?

Hi, I am creating a newspaper and I've inserted the page number and company name on every page using the master page (you know the basic method).
Problem is I don't want the page number or the logo to appear on the first page, how can I do this?
Or will I have to copy and paste it on each page instead...? I'd rather not.
I'd appreciate any help I can get.
P.S. I'm using CS5 and obviously I'm talking about InDesign.

Make another master and apply it to the first page.
Take care, Mike

In pages I have the new logo and when I try to open a document it says I need an update to open. My computer says pages has been updated. Any suggestions?

I am unable to open certain documents in Pages. A number of documents in Pages have the new logo and when I try to open it, I am prompted to update, yet my computer says Pages update is installed. Not sure how to get around this? Thanks

You are not on OSX 10.7.4, you are on OSX 10.9.
You have 2 versions of Pages on your Mac.
The newer Pages 5 in your Applications folder which can open the older Pages '09 but frequently alters/damages the file.
The older Pages '09 in your Applications/iWork folder which can not open the newer Pages 5 files.
You appear to be alternately opening one or the other.
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Best is to archive/trash Pages 5, after exporting its files back to Pages '09 versions, then rate/review it in the App Store, and get back to work.
Peter

How do I get the top bar back that shows page description and the Firefox logo?

The bar at the top of Firefox that appears on every program above the menu bar is gone.
As in, the bit that normally displays the page title, and the firefox logo. It now looks indistinguishable from Chrome. I'm not in full screen mode.
When I click and drag firefox to the top of my screen to snap it to my monitor size, the firefox logo and the title are shown for the instant until it snaps, but as soon as it snaps it's gone (and generically everywhere).
I want to be able to see what browser I'm in at a glance, and see the title of the page I'm on. How can I resolve this?

You can find the button to enable the window title bar at the bottom left of the customize window.
*3-bar Firefox menu button > Customize > Title Bar
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
;[[Image:Customize Fx 29 Win8]]

My homepage is Google but the logo and search box seems higher on the page than normal...can I adjust the position?

I had to set the settings on Google to Do Not Use Google Instant in their search settings as no cursor was showing on the google search box. After the change it seems that the Google logo and search box seems higher on the Firefox page. I would like to be able to adjust the height of the Google logo/search box. Please tell me if I can make that adjustment.

Thank you for the information about the zoom feature on Firefox. I had found that under the View menu (although I did find it was a temporary fix and the Tools/Options/Font method does change it for a "stick") and changing the font size does increase the size and enlarges or "moves" the logo and search box on Google but that also increases the font size displayed in the search screen. I was hoping to find a way to move the Google logo and search box down on the home page a bit but not change the font size but realize that may be too fine of an adjustment. The zoom feature added to the toolbar via customization may be a good solution for me. Thank you again for your helpfulness.

I was trying to update my ipad and it froze up and I can't get it to the home page all I have is an itune logo and a plug

I was trying to update my ipad and it froze up and I can't get into the home page to delete or uninstall the update, I have and itune logo and a plug on the screen

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

I just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.
Sridhar

Okay - let's cut to the chase...
If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

E-Recruitment EHP4 Ext Cand Pages Logo and theme

Similar Messages

Maybe you are looking for