E Recruitment External candidate user id in SU01

Dear All,
while creating user name for external candidate through HRRCF_CAND_REG, a user name is getting created with some different sequence and we can see it in SU01. will SAP treats it as a new user when it comes to user licences or will SAP ignore this user. please let us know if we are missing on something.
Regards

Dear ,
Following information about E-Recruiting user licenses:
For Reference User,Service user & Communication user you may please refer to the chapter 13.7 of the System Measurement guide 7.0 available in the service market place (service.sap.com/licenseauditing >Named
user Measurement > Documentaion) Please also refer to the SAP Notes
327917 & 553606)
Regarding Dialog Users, You need to customize some special user types to identify these users like the following:
Special user 01 (ID 71): e-Recruiting, External
Special user 02 (ID 72): e-Recruiting, Internal
a.For the External Candidates who log on to SAP System Via URL- Should be classified with Special user 01(71)= e-recruiting External
b.Internal Candidates who are employees (and not already have a chargeable user in another SAP System)Should be classified with Special user 02 (72) = e-Recruiting,Internal
So the external users (ID71) are not counted against your e-recruiting
user licenses!
This is 100% assurance..
Best Regards,
Deepak...

Similar Messages

E-Rec 6.04 Incorrect status of external candidate user password.

Hi,
We are on E-Rec 604 with seperated standalone e-rec system.
I have a problem with the password of external candidates. When an external candidate is registered in the application, introduce user and password and all mandatory fields and all work ok. He can enter in his profile, introduce all fields, apply offers, etcu2026
But when he log off and try to access again, the password is incorrect. If the external candidate Request a new password all works ok and when introduce this one and change this initial password, this new one let him to access in the future login in the correct way.
I realized that this is because the USER in R3 of the external candidate is cretaed with the field Password Status set to Initial password (set by administrator) and I think it is wrong, the status must be Product. Password. Instead, when request new password and set the new one the field status is Product. Password., the correct statusu2026
I´m very confused I don´t know what can I did wrong.
The type of the user is Dialog and the user that create all the external candidates user is the WF-BATCH my workflow useru2026 I think perhaps this is the reasonu2026 This is the correct user to create the external users?. Perhaps.. I set the assigned agent bad in any Workflowu2026?
Somebody could guide me, please?.
Best Regards,
Esther

Hi,
it seems you have a workflow in background sending out a smartforms based email after registration.
This smartforms seems to have a password generation mechanism, which overwrites the password of the user with a new initial one.
Please check that.
Best regards
Sebastian

E-Recruiting -External Candidate application - External Branding - SAP Them

Hi,
In E-Recruiting, External Candidate application launched out side of portal. We need to change the SAP Themes as per customer branding requirements. Is it advisable to change the themes? What is the View of SAP for changing the Themes?
I understand that SAP generates links (eg. u2018Invites to applyu2019 has a URL) in various places in E-Recruiting BSP/WDA Application. We canu2019t modify/enhance methods to append URL parameter in order to call custom there. Am I right?
Please share your experience on this.
u2026Nandha

I'm closing this thread as i don't work this topic anymore.
Thank You!

E-Recruiting - External Candidate generating users in R/3

We are generating some tests on External Candidate (E-Recruiting) and we
have discovered that the external candidate generates an R/3 user (that can
be seen in the transaction SU01). This External Candidate should refer to
the RCF_CAND_EXT user in R/3.
This is generating massive users creation in R/3. This situation is not
allowed by Data Security.

Hello Pablo,
every action in sap needs a user who processes it. E-recruiting and its functions can't be an exception here. The unregistered ICF services like registration and unregistered job search which can be accessed by the external candidate without logging into the system are using a service user assigned to the ICF service or its external alias. All other functions need the user of the candidate which is created on registration.
Usually the candidate creation should be done by the service user. The external candidate only changes the user e.g. when changing his last name or his password. In the manual data entry scenario users are created by the recruiter who enters the application.
The login to the system is necessary to enable the candidate to relog to the system, maintain his profile data, continue an interupted application, use services like the job agent and check the status of applications. Without user and login there would be no possibility to link the person and the data in the system. No user and login for the external candidte would mean that all these functions would not be possible. You would need to convert the whole application to some sort of fire and forget web application form. I have no idea if this is technical possible or if the system would complain about the inconsistant data.
So creating users for external candidates is a must for sap e-recruiting when running w/o a total conversion. The reference user RCF_CAND_EXT is just a way to assign authorizations to the candidates user and needed due to some authorization cache issues. I have never seen this to be an issue if you use propper authorization roles instead of the sap standard ones. Even in projects with a maximum of security requirements e.g. in the defense industry. Furthermore you should schedule report RCF_UPDATE_EXT_CANDIDATES to switch the user type for external candidate to prevent a logon to the backend.
Best regards
Roman

E-recruitment - External Candidate page should not be allowed to enter int

Hello,
We have requirement in e-recruitment. When recruiter is entering Internal Candidate information using External Candidate site, system should check email adress (company email address), if this is matched and system should prompt with the candidate information that we already have. Do we need change the standard SAP code to implement this? or any other ways?

For the GUEST user in portal we have done usermapping to the E-Recruitment system using 'J2EE_GUEST' user in E-Rec.
In SLG1 we are gettting the following errors
An exception occurred in E-Recruiting.
CL_HRRCF_ABSTRACT_CONTROLLER==CPCL_HRRCF_ABSTRACT_CONTROLLER==CM00156
No candidate could be found for US J2EE_GUEST
The system cannot find any candidates using the data specified.
Error while creating candidate

R12 - irecruitment external candidate user account

Hi,
As part of Oracle's release R12.1.2, recruiter can create external candidate's user account.
I have set the "IRC: Create User Account" to Yes at site level. This made the e-mail field on create candidate page as required. I created the cadidate with required information.
After that, I can search the candidate with the first name, last name etc. However, no e-mail/notification is sent to that external candidate. When I checked the user for that external candidate using system administrator responsibility, the user account is created but there is no responsibility attached to it.
Oracle is expected to send a notification to the e-mail id of external cadidate with login information which is not happening. What am I missing?
Thanks!

This sounds like a problem with standard functionality to me so you might want to kick off the SR route.
A couple of things:
1) Can you see the notification in wf_notifications?
SELECT *
FROM wf_notifications
ORDER BY notification_id desc;
(this gets all notifications ordered by the most recent, so scan through the begin_date to see if you can find one for this user)
2) Do you see any responsibilities after running these concurrent programs:
- Sync responsibility role data into the WF table.
- Synchronize WF LOCAL tables

E-Recruiting External Candidate login

Hi,
I've got a problem with the external candidate login. System requires a logon prompt instead of taking me directly to the start page.
I've got the RCF_UNREGSER service user set up. I DO NOT have this user assign to the HRRCF_START_EXT service. I do have this service user assigned to some of the other services. Could the problem be that I have the service user assigned to one too many or too few of the other services?
Thanks, Vlad

It seems that there are somethings mixed up.
A startpage is something, a candidate can log on (HRRCF_START_EXT?rcfSpId=0001). From there he can look for jobs, maintain his profile, fill out personal settings and different other things. In this case he has a user and password.
Using the unregistered scenarios is done via the unregistered services as you mentioned. There is no start page built for that. Those links are supposed to be integrated into the customer's web page directly.
Even the log on to the candidate self service start page shall be integrated into the customer's web page.
The post you made before gave me an indication, but I need to ask: Did you generate the URLs via RCF_GENERATE_URLS?
This might give you an impression between the difference of registered and unregistered services.

E-Recruitment External Candidate Page in Portal

Hello All,
we have E-Recruitment 6.0(Stand alone installation) and EP 7.0.
Have configured Anonymous logon in portal and created iViews for the External page(ABAP webdynpro for application hrrcf_a_startpage_ext_cand), since its a ABAP Webdynpro iView it is checking for the usermappin for SSO and hence the application thows error.
The application is displayed properly using the URL
"http://<E-rec_host_name>:<port 8000>/sap/bc/webdynpro/sap/hrrcf_a_startpage_ext_cand?sap-language=EN"
The problem is only when trying to access through the Portal; We need this since we are exposing portal externally.
As the main purpose of the application 'hrrcf_a_startpage_ext_cand' is to display a logon page and also allow a user to register, there should not be any user mapping done.
Really confused how to handle this scenario; Can any one help in integrating this E-Recruiting with Enterprise Portal.
Thanks All in advance.

For the GUEST user in portal we have done usermapping to the E-Recruitment system using 'J2EE_GUEST' user in E-Rec.
In SLG1 we are gettting the following errors
An exception occurred in E-Recruiting.
CL_HRRCF_ABSTRACT_CONTROLLER==CPCL_HRRCF_ABSTRACT_CONTROLLER==CM00156
No candidate could be found for US J2EE_GUEST
The system cannot find any candidates using the data specified.
Error while creating candidate

Debugging WDA External Candidate Application - E-Recruitment

Hi I am trying to enhance E-Recruitment External candidate registration and Candidate profile applications which are built in Webdynpro ABAP.
My problem is I am not able to debug these applications using external(http) breakpoint as the breakpoint is set using my ID and the application user by default uses the user RCF_PUBLIC( I think so).
Please help me in finding a way to debug these applications.
@Moderators
I'm not sure where to post this message, in Webdynpro abap seciton or HCM. when I searched I saw a couple of similar questions in this section, hence posted here.
Thanks,
Sunil
Edited by: XSSDev on May 17, 2010 8:26 AM

Guys,
Thanks for all the replies, they were all helpful.
Here is how I was able to debug it.
Transaction SICF -> select the WDA application ->activate Debugger(edit->debugging->activate debugger)->change the User to 'RCF_PUBLIC' or watever the user maintained in logon data for that service.
now set your breakpoint and test the application. I was able to successfully debug it.
Thanks and Regards,
Sunil

EREC- External Candidate login problem

Hi Experts,
In E-recruit, external candidates enters the desired user name and password (at the time of registration). This is then used to login to the system. But in my case, external candidate is not able to login using this user name and password.
This user name is the alias and an user name is automatically creates in su01.
He is able to login using this auto generated user name. Why is this so?...external candidates are supposed to login using the alias.
Regards,
Kishore

Thanks Sebastian
I am trying to access the link generated for "Call External Start Page" by running "RCF_GENERATE_URLS" in se38.
I have created a service user "RCF_CAND_EXT" and attached it to service "hrrcf_cand_reg" only.
RCF_CAND_EXT is having the following roles:
SAP_RCF_DATA_TYPIST
SAP_RCF_DATA_TYPIST_ERC_CI_2
SAP_RCF_EXT_CANDIDATE_SERVER
SAP_RCF_EXTERNAL_CANDIDATE
SAP_RCF_UNREGISTERED_CANDIDATE.
I have given Data typist role cos it was giving me error at the time of candidate registration: "that no role for creating user"
I am trying to access the service through Intranet and NOT Internet. Can this be the issue?

Error while registering as an External Candidate - E-Recruitment

Dear All,
When i try registering as an External Candidate , iam getting an error message "You not authorized to use this Start page". Would be thankful if you could share your inputs on required Authorization. Btw i did try giving SAPALL to RCF_CAND_EXT but still in vain
Following are the server and other details.
1. ECC on one server
2. E Recruitment on a separate server
3. Both are in enhancement pack 3
4. Backend and frontend related to webdynpro are in the same system
5. Have created RCF_Service (user) and assigned Z role related to RCF_unregistered candidate
6. Have created RCF_CAND_EXT and assigned Z role related to RCF_External candidate
7. Have maintained RCF_Service and RCF_CAND_EXT and its related role in both Parent and Child system using SU01
8. Have also assigned service user to all related services in SICF.
Note: I shal checked with the Standard role but in vain...getting the error as mentioned above
Thank you for your time.
Kind regards
Sathya
Edited by: sathya sekar on Nov 15, 2009 9:08 PM

Hi Sathya,
Please ensure RCF_CAND_EXT user u have created is a reference user and try assigning the standard role "SAP_RCF_EXTERNAL_CANDIDATE".
On registration, the registered user gets access to the external candidate start page through the reference user.
Best Regards
G Raj

Not able to connect to E-recruitment Screen with EXternal Candidate URL

HI., when i generate the External candidate URL., by making use of the same i am not able to connect to the portal Screen of E-recruitment.. (I am able to connect with other roles like Recruiter and Employee)
How else can i connect to the Screen to fill the application details in E-recruitment.
Regards
Madhu. K

Hi,
please make sure that your user is really an external candidate. The logon for external candidates works with the ALIAS instead of the username. Ss if you want to logon with your user as an external candidate you have to enter the username in the field ALIAS within SU01.
Cheers
Matthias

E-Recruiting: Exposure to External Candidates

Hi Experts,
We're currently in the initial phase of implementing e-Recruiting 6.0 (Integrated scenario) at a telecom client on a global scale. Following is the doubt:
Can we do away with exposing the client's e-Recruiting system to the external world/internet. Client has decided not to expose the e-Rec. system to the external world/internet. Question is so how will the external candidates search, register & apply for the jobs? A workaround is to have the external candidates' data which is currently being captured on their existing career site (non-SAP legacy) & pull the data to e-Recruiting. On this, I'm not sure how will the mapping be achieved.
Is this scenario possible through some std. functionality (we're not using PI/XI). If this solution is a Z solution, what are the efforts required for custom development? How will we intergrate SAP KRPO for storing the documents & TREX indexing etc.
Thanks in advance,
Sachin.

Hi Sachin,
Hope you are doing good.
Some pointers to exposing your PA-ER System to external candidates, This is standard security process.
Concept of DMZone:
External candidates: to register and search for vacancies available in the company, the web applications residing on the E-Recruitment system (ECC System) should be made available via internet.
Additional security to the Intranet ERP system: ERP system has to be separated from the external users using reverse proxy server configured in the DMZone (neutral zone in between Intranet and External network, which is protected by firewall) of the company, So , externally would not have direct access to the E-Recruitment system.
Exposing the IP address of E-Recruitment system: we expose the IP address of reverse proxy server for public access. Then the reverse proxy server would be configured in such a way that all the requests for E-Recruitment applications would come to the standard HTTP port XX of the reverse proxy server and the reverse proxy would take care of forwarding the requests and (transparently) sending them back as if it was the content server itself.
ISA Server 200X: the reverse proxy server has many additional features and, most of the customers prefer to implement their reverse proxy scenarios on ISA Server series.
Inspired by Roman
Regards,
Rohit

E- Recruitment 600 - External candidate creation

Hi All,
I created internal candidate and iam able to view the start pages of the internal candidate.
But when followed the similar steps to create external candidate iam facing lot of issues starting from User creation. can anyone share their inputs wrt ext candidate user creation and its related portal page.
thanks in advance.
kind regards
saipriyan

Hello Sai,
of course you are right that the standard functions to create an external candidte differ from creating an internal one. In the production scenarios there are basically 3 ways to create an external candidate:
- The candidate uses the registration where he registers to the candidate pool without actually applying to a position
- The candidate uses the unregistered search and applies for a position. In the process of applying the candidate is created
- The recruiter uses the minimum data entry functionality accessable through a link on his startpage to enter a hardcopy application into the system
These 3 scenarios are available for creating the external candidate but each of them requires a certain amount of configuration (e.g. unregistered search requires a properly set up TREX search engine) which usually takes some time.
On the very beginning of a project when the servers are installed and the basic configurations have been done, I usually test all standard start pages to see if the basic settings are ok. In this case all I want is the ability to log in and call the startpages. Then I use the described approach to just give an internal candidate which is usually my test user the authorization for the external startpage and I set the username as Alias so I can call the page. Of course next steps are creating the first requsition / posting / publication and test the application wizard (as said this requires the TREX set up or some help report to generate a direct application link). But overall for me I find it very handy to ba able to log on to all internal and external applications with my test user so I do not need to remember several logins as long I do not start testing full scenarios with applied authorization.
Best Regards
Roman Weise

External Candidate Registration does not create the user id

Hi Everyone
I am implementing EREC on Enhancement Pack 4 and I am trying to get External Candidate Registration to work. When I try to register nothing happens. User Id's are not created and I am not taken to the Candidate Profile screen. I have activated in SICF the hrrcf_a_candidate_registration service and assigned RCF_UNREG as a service user to it. I used OSS note 1017866 but it says:
Execute the IMG activities under "'SAP E-Recruiting' -> 'Technical
Settings' -> 'User Interfaces' -> 'Settings for User Interfaces with WebDynpro ABAP'". Note that you must execute the IMG activity for both the front end and the back end.
EP4 does not have this IMG path anymore.. So do I just setup both front end and back end? Can anyone help.
Thanks.
Vince

Vincent, I'm experiencing the same problem but had trouble finding the answer in the forums. What fix did you use?
thanks,
Paul

E Recruitment External candidate user id in SU01

Similar Messages

Maybe you are looking for