E-Recruitment - Issue in Requisition Approval, flow to Recruiter

Hi All,
Im using standard WF 45600028 for requisition approval.
The request when created by Manager is going for approval to his supervisor and Supervisor in turn is able to approve the request, but the its not reaching recruiter.
When i verified Requisition monitor of the MSS view, then i see the request in "Draft" mode instead of "Released".
I feel this is the reason why recruiter is unable to see the requisition coming from Workflow.
Can someone help me change the status?
Thank you.
Pranitha

Hey Thanks Siddharth,
Anyways, my problem is resolved. What i mean on Recruiter's involvement is recieving the approved form so that he can take it up further for posting.
In My case Recruiter's dash board or UWL , nowhere is the data populated. So i was of the opinion that the approved requests are by default saving in draft mode and hence not reaching recruiter.
Finally, i reallized that there is a small refresh link, at the bottom of the dash board. I need to click on the each of the links in the dashboard and "Refresh" from the link at the bottom, then only my approved requests are showing up, that too under "My Application Groups, My Open Requisiotns and All requisitions".
Silly me !! I have wasted so much of my time debugging Workflow and changing all the possible config setting.
But i really wonder why cant the data base be updated when we refresh with F5 instead click on each of the links in dashboard inorder to see what has he got in his box. This seems little weird to me.
Regards,
Pranitha

Similar Messages

Requistion Approval Issue for iProcurement Approval Flow

Hi,
The instance details upon which i'm currently working are as follows,
R12 Instance
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.1
I'm currently working towards resolving an issue where in all the requisitions submitted by a particular user through iProcurement are resulting into the status Incomplete.
After submission by the user the requisition approval workflow is kicked off and the approval request notifications are being sent out.
The approvers have approved the notification as well.
Inspite of all the approvals being gathered for this requisition, the workflow completes but the requisition status is set to Incomplete.
Any pointers as to why this might be the case. Also could you suggest where i need to be looking to resolve this issue.
The workflow i repeat always completes normally.
Any suggestions or advise is much appreciated!!
Regards,
Vishal

Any updates or help on this issue. Right now i'm out of ideas and places to look for to find the root cause that is creating this issue.
Any help or guidance is much appreciated!!
Regards,
Vishal

E-Recruiting 3. 0 Requisition Approval

Hi
The requisition approval worflow is not triggered. Does anyone have any guidelines in terms of triggering this workflow?
The worflow is activated and required config done.
Please assist.
Tx.

Hi Bongisa,
May be you can check up whether the Event and Workflow template Linkage is maintained using the transaction SWE2.
In case if it is not maintained, may be you can add the Triggering event in the Header data of the workflow template.
And also you can check if the Event is triggered using the Event Trace "SWEL"
You can switch on and off the Event Trace by using SWELS.
Hope this helps.
Regards,
Raj

PO Requisition Approval workFlow

Hello All
I am working on PO Requisition Approval work flow , when we crate a requisition one workflow is generated and my user want the workflow notification should be modified , like we have in the table few columns supplier ,itmes and wareshouse details , user want near supplier column , two another columns , so how should i do this , were should i change the code wether in the workflow or the standard package .
I am working on PO Requisition workflow , my problem is when Requisition is raised ...'PO Requisition Approval' work flow is generated and in that workflow we have details printed in the table , now i want to add few coulmns to the table . So i have modified the package PO_WF_REQ_NOTIFICATION.get_req_lines_details_link procedure , but the i am not able to see the affect in the work flow after comiling the package ...
can any one suggest me how to go head and cross check the changes .....
Thanks,
Sairam.

Hi Sairam,
I recently responded to a similar question, check out:
can we personalize e-mail notifications which calls OAfwrk
Regards,
Gareth
Blog: http://garethroberts.blogspot.com

Customization to Add Approver to Requisition Approver List

Hi
We use a Position Hierarchy to determine the Approver List for a PO Requisition Approval
However we also use Project Costing, and would like to dynamically add the Project Managers into the Approver List for Requisition lines coded to their Projects.
Does anyone have any experience doing this ? Know of any Open API calls that will allow this?
I have been through the Workflow and have designed the Process flow changes required, but cannot find any documentation on "dynamically" adding an additional approver into the Approver List.
Thanks

I have completed work on this and it will require use of the Applications Framework to add in the appropriate user. You will need to work with the Controller for the page as well as the AM for some validation.
In short you need to complete Applications Framework customisations to get this information.

How to hide REASSIGN Button for PO Requisition Approval Notification only

Hello,
I have a requirement in which I have to HIDE the REASSIGN button from the PO Requisition Approval Notification page. I realized that this page(NotifDetailsPG.xml) is being used by Sourcing Module too for sending the Approval Notifications. So I cannot directly set the Rendered Property to False for this as this would hide the REASSIGN button in Sourcing Approval Notification too.
So, how do I hide the REASSIGN button from the Notification page only if the Page is being used as PO Requisition Approval Notification? Can I use SPEL command in this case? Can somebody help me with this issue?
Thanks
Sunny
Edited by: user13369509 on May 16, 2011 7:39 AM

Hi Srini,
Thanks for the Immediate Response, I reviwed the Maetalink Note which you suggested, it was stated as:
Starting from ATG_PG.H.Rollup 4, an enhancement has been made to the Notification Details screen.
When the user viewing the notification has been granted the Workflow Administrator privilege (through the WF_ADMIN_ROLE preference), then the Reassign button will always be visible, even when the message attribute #HIDE_REASSIGN is set to Y.
This allows Administrators to reassign any notification when necessary in exception cases.
But in my case, the user do not have the Workflow Administrator privilege. He was not assigned with any workflow Admin Resps. Is there anything I am missing to check the WF_ADMIN_ROLE preference for a particular user?
Regards,
Sridhar

Approval flow

Hi
I have an issue about workflow, I have created the automatic workflow customizing in SWU3.
But when we receive a bid from our supplier the bid is not approved automatic, I have activated following workflows
WS 79000002
WS 79000010
when I look into TC SWI2_FREQ the error description is
No Agent Available
so how did I get my agent automatic, because we did not want any approval flow.
Jakob

Hi Deepti
This might be right, but it is funny that the configuartion Guide tells us to activate both of them
furthermore i see this issue in our production and not in D or Q.
her is the words from the configuartion guide
You must set up the workflows WS79000010 and WS79000002 in any case, even if you do not intend to use approval steps in your process. These workflows control the system behavior after accepting a bid.
so did you have an answer why this is not happen in D/Q but only in production?
Best Regards
Jakob Bang

Issue on CO-PA flow

Hello Experts and gurus
In Production and also in Pre-production we had an issue on CO-PA flow. We have lost some data. I''d like to know if there is way to recover this data. We have identified the date when the data are missing. Data missing on Nov 15 due to a repeat last delta.
It is on YIP_F_1_CO_PA_1000_03(infopackage) flow

You can try to extract it with selecting in infopackage the document missing.
Depend of selection defining in datasource.
Mario

Table design for approval flow

Hi,
For our application,we have to create an approval flow in Java.
We have to maintain the structure in the database.We are using Oracle 10g and we don't have any DBA access.
The brief structure is as follows:
there will be an activity which after being created is allocated some cost.
After allocating the cost,it goes through a first level approval.
If approved then it has to go through a second level approval and then the activity becomes approved.
The full flow needs to be tracked in a table structure whether the activity is created/rejected/approved first level/approved second level.
In a separate table structure we also need to maintain the hierarchy of user,approval 1 and approval 2.
Could you please suggest me way outs to maintain the hierarchy as well as the full historical data related to the activity after it is created.

In the workflow system,One request is created by Specific user who belongs to particular role. Approver are dynamic currently 5 approvers are available but in future the approver may be 'N' numbers. Each stage the status is different. Approver may
reject or reopen or query the request.. Based on these status the flow will status again from the requester or approver .suppose 4th approver made any query it should go to 3 approver or 1st requester.
I need to design the table for the above requirements .please advise with schema.
The basic table structure should look like as,
REQUESTOR
REQUESTOR_ID INT
REQUESTOR_FNAME VARCHAR(100)
REQUESTOR_LNAME VARCHAR(100)
REQUESTOR_EMAIL VARCHAR(100)
REQUESTOR_ROLEID INT
REQUESTOR_ROLE
ROLE_ID INT (PK)
ROLE_NAME VARCHAR(100)
ROLE_DESC VARCHAR(300)
APPROVER
APPROVER_ID INT (PK)
APPROVER_FNAME VARCHAR(100)
APPROVER_LNAME VARCHAR(100)
APPROVER_EMAIL VARCHAR(100)
APPROVER_CAT VARCHAR(50) -- IN CASE IF YOU HAVE ANY SUBSYSTEM THEN APPROVER CAN BE CATEGORISED.
STAGE
STAGE_ID INT (PK)
STAGE_NAME VARCHAR(100)
STAGE_PRIORITY INT -- IF REQUIRED, I.E IF THERE IS ANY STATUS PRIORITY ONE AFTER ANOTHER.
REQUEST_MASTER
REQUESTLOG_ID INT (PK)
REQUESTOR_ID INT (FK) REFER REQUESTOR_ID IN REQUESTOR table
REQUEST_DESCRIPTION VARCHAR(MAX)
REQUEST_DATE DATETIME
APPROVER_CAT VARCHAR(50) (FK) REFER APPROVER_CAT IN APPROVER table -- Email to be send to all approvers under this category.
REQUEST_STATUS INT FK REFER STAGE_ID IN STAGE ENTITY -- SET A STAGE AS DEFAULT STATUS INITIALLY(SAY NEW). UPDATE this field whenever the history information is updated in REQUEST_HISTORY table.
REQUEST_HISTORY
HISTORY_ID INT (PK)
REQUESTLOG_ID INT (FK) REFER REQUESTLOG_ID IN REQUEST_MASTER TABLE
APPROVER_UPDATED_BY INT (FK) REFER APPROVER_ID IN APPROVER TABLE
REQUESTOR_UPDATED_BY INT (FK) REFER REQUESTOR_ID IN REQUESTOR TABLE
UPDATED_DATE DATETIME
STAGE_STATUS_ID INT (FK) REFER STAGE_ID IN STAGE TABLE
Regards, RSingh

Initiating re-approval on price change durin purchase requisition approval

Hello everyone,
Must be a basic requirement for most people...can you please help us here?
We have a requisition approval hierarchy (defined in AME). We want the functionality that whenever an approver updates the price (through the "Open Document" in notification), the purchase requisition should be sent for re-approval starting with the requestor. Is there any profile option or workflow attribute which can be used for this purpose? I believe PO has some such option for setting the tolerance percentage, but don't know whether iprocurement has similar one.
Btw, we are using 11.5.10.2
thanks in advance,
abbas

Hi
For the the approval there is release strategy in purchase requistion ( with classifiaction .You can make use of this to put the approval .Now coming to ur Purchase requistion which are cretaed thru Mainatnace odere you need to cjheck the Field status for the document there you will the field valution price i just forgot the field status group.
you can try this way
regards
sunny

Enable attachement link in Purchase requisition approval WF

Dears ,
How to enable attachment link in purchase requisition approval wf ,??

hi
In the workflow, you need setup the agent assingment(i.e organizationlal roles)

Firing an approval flow - 11G Release2

Hi,
I have custom scheduled task for trusted source reconciliation. Depending on the parameters get from the trusted source I must disable user and fire an approval flow. I have no problem with disabling the user, I do it in a PostProcessEventHandler. To fire a approval flow, I should do it inside my Post Process Event handler calling webservizes or I can achieve that with a Approval Policy? Pleace can guide me?Any help is strongly appreciated..
BR,
Aliye

Hi Rajiv,
The requirement is as follow;
1. There is a filed in the HR wich tells me if the user is deleted from the trusted source.
2. In the post process event handler in bulkExecute method I check this field, if it tells me that the user is deleted from the trusted source I disable the user in OIM.
3. After disabling the user I must fire an approval flow. This flow is not for disable but for deletion the user. In this flow when the approval is done I will delete the user from OIM.
In my case I don know from where to trigger this flow, I need help on that point...
Thank you in advance for your help and guide..
BR
Aliye

SRM 7.0 Approval Flow in Graphical view

Hi experts,
I'm upgrading from SAP SRM 4.0 to 7.0.
In SRM 4.0 I was able to view, in a shopping cart, for example, the approval structure in graphical view and in a table view.
In SRM 7.0 I can only see the approval flow in a table view. How can I see the approval flow in a grapical view?
Thank you,
R Silva

Hi Silva
srm 7.0 - Only Table is only AVAILABLE. no more graphical overview in SRM 7.0 on wards.
SRM 4.0 /5.0 - Table as well as Graphical over view are available.
graphical overview was not supported in SRM 7.0 on wards as per standard.
Muthu

Fix authorizations for the budget approval flow (internal orders)

Hi,
I need to fix the authorizations for the budget approval flow.
What do I need to take into account?
Thank you.
Kind regards,
Linda

(1) Each appropriation request should be attached to an investment program (leaf) position. To update the approved budget on the investment program from time to time, you should
    - make a plan rollup from the appropriation requests to the program positions via IM34 (use an appropriate status selection profile on the initial screen of IM34 and select appropriation requests only to make sure that
       > only appropriation requests
       > with status 'Approved' are taken into account),
    - To budget the investment program via IM32, set view 'Planned total' (Menu: 'Views -> Planned total') and copy this view, which contains the latest approved budget amounts, to the "real" budget (Menu: 'Edit -> Select -> Select all' and then 'Edit -> Copy view').
(2) You can even generate an order from the appropriation request that enherits the appropriation requests plan value. For details see SAP Library (Menu: 'Help -> SAP Library'), path 'Financials -> IM Investment Management -> Appropriation Requests -> Replacement by a measure for implementation'. Analogously to step (1), you can also take over the orders 'Planned total' view into the orders budget via txn IM52.
If you strictly limit the authorisations to execute IM34, IM32 and IM52 as pointed out in steps (1) and (2) to a handful of people who execute these functions as pointed out above (withoud adding or removing budget arbitrarily, of course), the budgeting process
really focusses on planning/approving appropriation requests which is fully accompanied by the approval workflow.
Hope above helps you.
Regards
Siva

Facing some issue regarding Requisition interface table

I am facing some issue regarding Requisition interface table..
Purpose: we have to massage data & create massage data & create Requisitions.
Issue Detail:
Before:
Previously it was Auto Create Purchase Requisition
On the move transaction form step 10 to 20, this step will trigger creation of requisition.
and Creating Requisition successfully.
After:
After stopping Auto Create Purchase Requisition functionality the Requisition interface data is not getting populated in the Requisition Interface tables as well.
Please provide your inputs.

It's standard functionality not to populate the req interface while you don't want to autocreate.
Thanks,
PS.

E-Recruitment - Issue in Requisition Approval, flow to Recruiter

Similar Messages

Maybe you are looking for