E-Recruitment  - Loggin in Issues in E-Rec instance after ALE transfer

Hi,
We are running E-Rec in seperate instance and we have plans to implement the ALE Data transfer as a scheduled periodical Background job from HR system to E-Rec system.
We have also cutomized the ALE to set a default password when the data is transferred in to the E-Rec system.(We had done this to avoid the time & effort required from SAP Basis admin to reset the password of each E-Rec user whenever the ALE data transfer is performed)
After performing the ALE data transfer, when logging in the portal and accessing the E-Rec start page link the system prompts the user for a new password.
We are looking at an option where the ALE program can be modified to set a confirmed password instead of initial password.
Any suggestions on fixing this issue please. I request a solution for this on a high priority.
Thanks
G Raj

Sorry to be this direct,
but the first question which comes to my mind: Are you kidding?
You describe that you set the password of each user to the same default value just the bais admin is too lazy? And if this would not be enough you want that everyone can keep this password for eternity so everyone has always the possibility to log into every account including the recruiter / admin ones as they would be part of the ALE as all employees are part of the ALE and noone ever has to change the password (usually if you do not force someone to change his password he will never do)? Seems your security team died from an heart attac when u presented this idea so they do not have to be asked any longer.
Back to business:
The ALE creates a password on user creation. If the candidate is updated later the password won't be touched. Also if the user already exists when ALE is transfering an employee for the first time, the user will keep his password as before assigne authorization.
E-Recruiting has a standard function that the user can get a new password and unlock the user so no admin has to move a finger as long as the candidate has an email address where the system can send the new password.
If you do not want to bother the user with varius logins and passwords whild keeping a secure solution you shoul invest in a SSO solution.
Best Regards
Roman

Similar Messages

  • Problems with ALE transfer HR - E-Recruitment

    Dear Forum,
    I have an issue when transferring organisational and employee data from HR to E-Rec. HR employee just created another OU, as she has been doing lots of time, but it doesnt trigger the update of E-Rec - so this change is not visible in Recruiter Tab in the portal. This is the first transfer issue.
    Second issue is when transferring employees to E-Rec, a certain number of employee numbers are excluded (57 employees between 16154 and 16211) this doesnt make any sense to me. Why should an area be excluded, and where would this be maintained? One of the employees who cant get transferred to E-Rec is in this range, and I wonder if this could be the reason.
    If anyone has any suggestion to this please let me know!
    Thanks a log in advance,
    Kind Regards,
    Soren

    Dear Forum,
    I have an issue when transferring organisational and employee data from HR to E-Rec. HR employee just created another OU, as she has been doing lots of time, but it doesnt trigger the update of E-Rec - so this change is not visible in Recruiter Tab in the portal. This is the first transfer issue.
    Second issue is when transferring employees to E-Rec, a certain number of employee numbers are excluded (57 employees between 16154 and 16211) this doesnt make any sense to me. Why should an area be excluded, and where would this be maintained? One of the employees who cant get transferred to E-Rec is in this range, and I wonder if this could be the reason.
    If anyone has any suggestion to this please let me know!
    Thanks a log in advance,
    Kind Regards,
    Soren

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • T.Code for  issues return by the user after month closing

    Dear SAPient's,
    Give us the transaction facility available in SAP to account the issues
    return by the user after month closing.
    regards,
    Bijay Jha

    Dear SAPient's,
    Actually I want to know that when the Goods Issued and from that some goods are returned back due to any reason.
    I want to know Is there any T.Code from which i can get full details of Goods which is returned after Issuing in one month.
    Warm Regards,
    Bijay Kumar Jha

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Why iCal cancel of event edits issue is still not fixed after over 2 years?

    Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
    I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
    What would it take for Apple to start working on this issue?

    Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
    Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
    If you feel the same way, you should post a note here:
    http://www.apple.com/feedback/ical.html
    Message was edited by: SteveMc10123

  • Critical Issues During SAP Implementation or After Golive

    Can anybody tell me one of  the most critical/ challenging issues During SAP Implementation or After Golive
    in these modules:-
    MM implementation
    PP implementation
    SD implementation
    FI/CO implementation
    PS implementation
    QM implementation
    HR implementation
    BI implementation
    XI implementation
    Thanks and regards
    RS

    hi,
    I will list out few of critical issues in
    Implementation :
    1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
    2.  Unit & Integeration testing should be through with all validations
    3.  Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
    If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
    4. Check tax procedures are customized according to requirements.
    5. Complete all print document customizations before go live
    6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
    cancellation/reversal of documents after post go live)
    7. Ready with standard MIS reports & customized reports for business decision making
    8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
    9. Check all tables datas are updating correctly
    10. Declare go live to SAP Support
    11. Check All user authorization should be correct according to their roles.
    12. Centeralize all master datas creation(avoid duplication)
    13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
    14. Ensure document numbering is completed for all documents
    15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
    After Go live :
    1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
    2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
    3. Identify there is enhancements to be done in transaction process(By step-2)
    4. Prepare a list of month & year end activities to be performed for all modules give to users
    5. Prepare  a list of frequently used transaction codes module wise give it to users
    6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
    7. Train the users,take reports in respective modules.
    8. Additonal customization might be done in print documents.
    9. Instruct users/CTM's to adapt SAP Standard practise
    10. Update excise tax rates after every indian budget
    Hope it helps.
    Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

  • I have been having issues with my computer lagging after installing lion.

    I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?

    Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ?  Currently running RTM version of SQL Server 2008 R2.

    Hi There,
    As a testing purpose long time back i did this. I did this step by step
    I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
    Then upgraded to 2008 SP2.
    Then upgraded to 2008 SP3
    Then upgraded to 2008 R2.
    Then upgraded to 2008 R2 SP1
    Finally to SP2
    I dint find any issue.
    I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
    If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
    Every thing is fine in the LAB equipment i tried this.
    Gautam.75801

  • Issues connecting to License Server after ServerTools upgrade 8.8

    Hi
    To run a preUpgrade Check I needed to upgrade the ServerTools from 2007 to 8.8.
    Since this upgrade I can not connect to the License Server anymore.
    Does somebody have an idea what could be wrong? I removed and reinstalled it twice and I do have a new license file.
    The upgrader also shows me the COMMON grayed out and I con not run the Check either. I assume this is for the same reason.
    Thanks
    Franz

    Hi Franz,
    After upgrading the server tools with the Upgrade Wizard, the License Server is not started automatically. This issue is documented in a SAP Note [1488839|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1488839]. In order to resolve this issue please start License Manager after the upgrade.
    The 2nd issue (The upgrader also shows me the COMMON grayed out) is described in SAP Note [1433019|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1433019].
    In order to resolve this issue please upgrade your environment either to 8.8 PL10 or to 8.8 PL12.
    hope it helps,
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • TS1702 Has anyone had issues signing off of Facebook after installing iOS 6?

    Has anyone had issues signing off of Facebook after installing iSO6 update?

    Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

  • The home button has stopped working on my iphone 5c. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode.

    Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.

    If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.

  • E-Recruiting - BSP Application name from E-Rec portal URL

    Hi,
    How can we find out the name of the BSP application from the E-Rec portal URL? I need to do a change to the activity and unable to locate the exact BSP application name for that. Any help will be greately appreciated.
    Thanks in advance.
    Naresh

    Hello Naresh,
    If you want to integrate the BSP application and want to know  how this application is generated, then you can have a look over the Report rcf_generate_url, This generates the URL for Recruiter, Candidate etc.
    otherwise If you want to see which application is running then you have to check with the application starting with HRRCF.
    Best Regards,
    Deepak...

  • MOPZ issue for E-Rec 6.0 Server

    Hi Experts,
                 I configured MOPZ in solution manager for E-Rec 6.0 server, If i choose calculate the files automatically I am getting error as " No Addon Product Version allowed for transaction: SAP E-RECRUITING 6.0 (01200615320900001315)". Kindly help me.
         Thanks in advance.
    Regards,
    Sampath.

    Hi Sunny,
                Sorry if i go to system -> status -> our server is "SAP NetWeaver 2004s", But is is E-recuirement server, if i go to smsy i can able to find SAP E-RECURTING. Here my doubt is i need to register under SAP E-RECURTING or I need to register under SAP NETWEAVER.
                Kindly help me.
    Regards,
    Sampath.

Maybe you are looking for