E Recruitment : Requisition - Position Validity issue

Hi All,
In Requisition creation, I am trying to assign a Position ID in Org Structure assignment Tab.
When I search for position ID here, in the result of search list it also shows the positions whose status is NOT "vacancy open" as on today.
If the position's status was "Vacancy Open" in the past, but not valid as on today's date, still that position shows in the search list. Which ideally it should not.
Any clue will be appreciated.
Thanks.
Tejas

Hello Tejas,
it is standard behaviour of sap e-recruiting to allow the assignment any position, a vacancy is not required.
When searching for positions there should be a checkbox to search for vacant positions only. This should reduce your result list.
Best Regrads
Roman

Similar Messages

  • E-Recruiting : Requisition status

    Dear experts ,
    Please throw some light on the following thoughts :
    I can see that if the object NB has status draft,released,on hold or closed, i can assign candidates to the Requisition.
    Is this the standard system behaviour? or have i missed something here.
    Can someone explain the need/provision to assign candidates to a requisition when it is in status Draft, On Hold or Closed?
    Thanks in advance,
    Sowmya

    Hello Sowmya,
    I'll give you two answers please choose which you like.
    The scientific process focused one
    - it is necessary to assign applicants / candidates to requisition in status draft if you want to evaluate if a publication of the requisition is necessary or if you are confident to do the hiring based on your candidate pool only. In addition assignment must be able when you are redoing requisition and posting for better applicant address or changed requirements. This also requires status draft while the exisiting hiring process has to continue.
    - it is necessary to add applicants to the requisition in status closed if you have already closed it as you thought you were finished but in the last moment the candidate does not show up. Espacially combined with mass hiring where a single requisition means many positions filled this can be a valid issue (often happens with apprentices). If you use the approval process it is often very handy to not set the status back to released as it would require new approval which makes no sense.
    - adding candidates in status on hold is used to put spontaneous applicants to requisitions wich soon will be open (as far as the on hold is temporary) so you do not loose a suitable candidate int the depths of the candidate pool where it gets probably lost.
    The unscientific but probably true one
    - if you ever would have worked in hr you would have learned that no matter what is done for process design (which is often done by organization experts of hr the other hr guys do not like) recruiter will not give a s*** about the processes. They will do what they think it is right. Process designs do not care. But to be fair this is not only caused be the hr guys but by the field of work. You can define a process which requires 2 screenings and 4 tests for hiring and still the upper management shows up with a candidate and says "hire him!". So a real process flow control in a sense of the restriction of action posibilities will fail. So the reason for the status of requisition is not to say you can assign someone or not, it is more a guideline how far the process is and to filter them in the lists. You can assign a candidate whenever you want as not recruiter would accept a stronger restriction.
    Best Regards and Happy E-Recruiting
    Roman Weise

  • MSS Recruitment Requisition 'Internal error: null" message

    We are setting up the recruitment requisition functionality of MSS.  When the form loads (via the Form Tree) we just get the message "Internal error: null". 
    I have checked the back-end config and iView properties.  All of the required PAR files are loaded.  We have MSS 50.2 on EP5-SP6.
    I think the same message might come up with the PCR forms too.  I would really appreciate any tips as I'm pretty stuck here.  I couldn't find any relevant SAP notes. Thanks.
    Log:
    com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:688)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:289)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:231)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:475)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:524)
    at com.sapportals.portal.prt.portalconnection.sapnative.DelegatedPlugIn.handleRequest(DelegatedPlugIn.java:715)
    at com.sapportals.portal.prt.portalconnection.sapnative.PortalPlugIn.handleRequest(PortalPlugIn.java:138)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:648)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
    at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
    at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
    at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
    at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
    at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1152)
    at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
    at com.inqmy.core.cluster.impl3.ParserRunner.run(ParserRunner.java:30)
    at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)
    Caused by: java.lang.NullPointerException
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.isValidUrlParamString(PCDEditorMessageHTML.java:97)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.createOnLoadJs(PCDEditorMessageHTML.java:54)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.createEmptyMessage(PCDEditorMessageHTML.java:31)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageMain.doContent(PCDEditorMessageMain.java:39)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:127)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:231)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:475)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:524)
    at com.sapportals.portal.prt.portalconnection.sapnative.DelegatedPlugIn.handleRequest(DelegatedPlugIn.java:715)
    at com.sapportals.portal.prt.portalconnection.sapnative.PortalPlugIn.handleRequest(PortalPlugIn.java:138)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:648)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
    at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
    at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
    at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
    at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
    at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1152)
    at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
    at com.inqmy.core.cluster.impl3.ParserRunner.run(ParserRunner.java:30)
    at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)com.sapportals.portal.prt.core.PortalRequestManager@7a687b #

    Hello Mike,
    We already had this kind of situation.
    On the transaction QISRSCENARIO you need to select your scenario and generate the .PAR file again (they will be on C:     emp). Then unzip those files and search for the "default.properties" and there you will find a parameter "SystemIdentifier.value=" that need to be your System Álias on Portal. I don't know why, but when you generate the file this parameter it is filled with SAP_R3_Financials. After the change you need to upload the .par file.
    Good luck!
    Daniel Kiel

  • Using Tabs in Generated Pages - Validation Issue

    Hi,
    We're using JHS 10.1.3.0.97 and are using the "stacked" regions functionality
    to make the form less cluttered.
    The problem we're having now is that whenever a user wants to
    view the items on a tab (that is not currently the selected one),
    a validation issue is thrown saying that all the mandatory fields need to be entered first.
    Is there a way to avoid this message and postpone the validation until the
    user clicks on the "Save" button?
    Regards,
    Cliff

    Cliff,
    I am sorry, in the 10.1.3.1 release we switch off server-side model validation on a partial page request.
    It is not possible to switch off the client-side validation, because the only way to do this, is by setting immediate=true on the tabs. However, with this setting JSF will skip the Model Update phase, which means that any changes you made to the tab region you are going to leave by clicking another tab, would be lost.
    The only alternative is by creatign a custom templates and generating the required items with showRequired="true" instead of required="true" which means required items are never checked client-side.
    Steven Davelaar,
    JHeadstart Team.

  • E-recruiting: Requisition management - Possible to change the field names??

    Hi to all e-recruiting experts,
    Need some assistance pertaining to the requisition management portion in e-recruiting.
    We have showed the standard SAP E-recruiting requisition bsp pages to our client and they have requested changes to the field names as they feel that the standard names are not intuitive enough.
    For instance,
    The field - "Hierarchy Level" - They have requested to change to "Job Grade"
    and the field "Functional Area"  to "Type of Work".
    Is there any way that i can change the name of the field through configurations?
    I understand that in a infotype, we can change the field name through translation. But can we change it in BSP? I was told to explore on how to configure via OTR.
    Can anyone share on the steps involved?
    Many thanks in advance.

    Well quite easy,
    create a context for an otr text (E-Recruiting are in package PAOC_RCF_UI). You will find that in SOTR_EDIT.
    Activate this context with implementing BADI BTFR_CONTEXT.
    After doing this, adjust context in SOTR_EDIT with Go To -> Context -> Adjust.
    Eventually refresh otr buffer with Transaction /$otr
    For one text there can be more than one OTR Text in backend, so you might change more than one.
    Regards

  • Recruiting Requisition: Status Overview iview not refreshed

    Hi
    When new E-recruitment requisitions are created its not getting updated in the iview - Recruiting Requisition: Status Overview.
    Its getting updated after many hours only. Can anyone provide the solution for refreshing the iview with the latest requisition say within few minutes.
    Regards,
    Sasha.

    Hi
    Can anyone please provide an input on this.
    Regards
    Sasha.

  • Validation issues with form (was: Validation)

    I am having validation issues with my form.  Even after I put in a name and last name it says the entries are invalid.  Could this be a hosting problem?  www.bussmanncomputers.net/Nx

    Below is mail form from my isp, which is Godaddy:
    This is the form that I am having some problems with configuring.
    <?php
    if ( !isset($_SERVER['SPI'])) {
            die();
    if (!isset($_SERVER['DOCUMENT_ROOT'])) {
            echo("CRITICAL: we seem to be running outside of the norm.\n");
            header("Location: http://".$_SERVER["HTTP_HOST"]."/");
            die("CRITICAL: Document root unavailable.\n");
    $request_method = $_SERVER["REQUEST_METHOD"];
    if($request_method == "GET") {
            $query_vars = $_GET;
    elseif ($request_method == "POST") {
            $query_vars = $_POST;
    reset($query_vars);
    function customsort($a,$b) {
            // $a is array for form vars, $b is comma seperated case sensitive field order
            // this is case sensitive -- good idea to hrc that.
            $data = array();
            if ( strstr($b,',') == FALSE )  {
                    $b = $b.",";
            $ordering = split(',',$b);
            foreach ($ordering as $orderitem) {
                    if ( ($orderitem != null) && ($orderitem != "") ) {
                            if (isset($a[$orderitem])) {
                                    $data[$orderitem] = $a[$orderitem];
            foreach ($a as $key=>$val) {
                    $data[$key] = $a[$key];
            return $data;
    function xmlentities($string) {
            return str_replace ( array('&', '"', "'", '<', '>'), array('&amp;', '&quot;', '&apos;', '&lt;', '&gt;'), $string);
    $t = date("U");
    $formhomedir = preg_replace('/.*\/home\/content/','',$_SERVER['DOCUMENT_ROOT']);
    $formhomedir = explode('/',$formhomedir);
    if (count($formhomedir) <= 4) {
            $formhome="/home/content/".$formhomedir[1]."/".$formhomedir[2]."/data/";
    else {
            $formhome="/home/content/".$formhomedir[1]."/".$formhomedir[2]."/".$formhomedir[3]."/".$f ormhomedir[4]."/data/";
    $file_order = ".default";
    $file_format = ".text";
    $file_interval = ".15m";
    $field_order = "";
    if (isset($query_vars['form_order'])) {
            if ($query_vars['form_order'] != "alpha") {
                    $field_order=$query_vars['form_order'];
                    $file_order=".custom";
                    $query_vars = customsort($query_vars,$field_order);
            else {
                    switch ($query_vars['form_order']) {
                            case "alpha":
                                    uksort($query_vars,'strnatcasecmp');
                                    $file_order=".alpha";
                            break;
                            default:
                                    $file_order=".default";
                            break;
    if (isset($query_vars['form_format'])) {
            switch ($query_vars['form_format']) {
                    case "csv":
                            $file_format = ".csv";
                    break;
                    case "html":
                            $file_format = ".html";
                    break;
                    case "xml":
                            $file_format = ".xml";
                    break;
                    case "text":
                    case "default":
                    default:
                            $file_format = ".text";
                    break;
    if (isset($query_vars['form_delivery'])) {
            switch ($query_vars['form_delivery']) {
                    case "hourly":
                            $file_interval = ".60m";
                    break;
                    case "hourly_digest":
                            $file_interval = ".60mc";
                    break;
                    case "daily":
                            $file_interval = ".24h";
                    break;
                    case "daily_digest":
                            $file_interval = ".24hc";
                    break;
                    case "digest":
                            $file_interval = ".15mc";
                    break;
                    case "default":
                    default:
                            $file_interval = ".15m";
                    break;
    $file = $formhome."form_".$t.$file_order.$file_format.$file_interval;
    $fp = fopen($file,"w");
    reset($query_vars);
    switch ($file_format) {
            case ".csv":
                    $csvkeys = "";
                    $csvvals= "";
                    $firsttime = "";
                    while (list ($key, $val) = each ($query_vars)) {
                            if ( ($key == "form_order") ||
                                    ($key == "form_format") ||
                                    ($key == "form_delivery") ||
                                    ($key == "redirect") ) {
                            else {
                                    if ($csvkeys != "") {
                                            $firsttime=",";
                                    $tmpkey=escapeshellcmd($key);
                                    $csvkeys = $csvkeys.$firsttime."'".$tmpkey."'";
                                    $tmpval=escapeshellcmd($val);
                                    $csvvals = $csvvals.$firsttime."'".$tmpval."'";
                    fputs($fp,"$csvkeys\n");
                    fputs($fp,"$csvvals\n");
            break;
            case ".html":
                    fputs($fp,"<table border=\"1\" cellspacing=\"1\" cellpadding=\"2\">\n");
            break;
            case ".xml":
                    fputs($fp,"<form>\n");
            break;
    reset($query_vars);
    while (list ($key, $val) = each ($query_vars)) {
            if ($key == "redirect") {
                    $landing_page = $val;
            if ( ($key == "form_order") ||
                    ($key == "form_format") ||
                    ($key == "form_delivery") ||
                    ($key == "redirect") ) {
            else {
                    switch ($file_format) {
                            case ".html":
                                    fputs($fp,"\t<tr>\n");
                                    fputs($fp,"\t\t<td><b>$key</b></td>\n");
                                    fputs($fp,"\t\t<td>$val</td>\n");
                                    fputs($fp,"\t</tr>\n");
                            break;
                            case ".csv":
                                    // content is already output
                            break;
                            case ".xml":
                                    fputs($fp,"\t<field>\n");
                                    fputs($fp,"\t\t<fieldname>".xmlentities($key)."</fieldname>\n");
                                    fputs($fp,"\t\t<fieldvalue>".xmlentities($val)."</fieldvalue>\n");
                                    fputs($fp,"\t</field>\n");
                            break;
                            case ".text":
                            default:
                                    fputs($fp,$key.": ".$val."\n");
                            break;
    switch ($file_format) {
            case ".html":
                    fputs($fp,"</table>\n");
            break;
            case ".xml":
                    fputs($fp,"</form>\n");
            break;
    fclose($fp);
    if ($landing_page != "") {
            header("Location: http://".$_SERVER["HTTP_HOST"]."/$landing_page");
    else {
            header("Location: http://".$_SERVER["HTTP_HOST"]."/");
    ?>

  • [svn] 3457: Accepting patch SDK-17038 by Brian Telintelo to fix an incorrect validation issue in ComboBox .

    Revision: 3457
    Author: [email protected]
    Date: 2008-10-02 13:45:35 -0700 (Thu, 02 Oct 2008)
    Log Message:
    Accepting patch SDK-17038 by Brian Telintelo to fix an incorrect validation issue in ComboBox.
    Checkintests: Pass
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17038
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/ComboBox.as

  • Need RFC/BAPI to Create Requisition,Position, Hiring an Employee

    Hi,
    I need RFC/BAPI to Create Requisition,Position,Hiring an Employee.
    Regards,
    R.Ragu

    Hi,
    For creation of a Posiotn you can use FM 'RH_OBJECT_CREATE'.

  • E recruitment candidate / requisition over view issue.

    Dear All,
    We are on EHP5, E Rec and ECC runs on one instance. As a recruiter when i click on the candidate name im not getting any details, same happening with requisition.
    In short i am unable to get an over view of the candidate and the requisition..
    kindly help...

    Dear Nicole,
    we are on  EHP5 and we are using portal role :
    pcd:portal_content/com.sap.pct/specialist/com.sap.pct.erp.recruiter.bp_folder/com.sap.pct.erp.recruiter.15.bp_folder/com.sap.pct.erp.recruiter.15.roles/com.sap.pct.erp.recruiter.15.recruiter.
    Do i need to do some customization for this?
    kindly suggest

  • E-recruitment requisition workflow(WS 51800008)

    Hello All,
    We are facing issue in approval of requisition workflow(WS 51800008).The issue is as follows,
    When we forward the requisition to recruiter for approval,the workflow WS51900008,WS51900005 are triggered corresponding to events CREATED,Status Change,but no agent is assigned for both of them.So i suppose the approval  Workflow WS51800008 is not triggered
    Could someone pls explain me in detail as i m relatively new to e-recruitment.We have done all the necessary settings for the workflow and implemented the note
    Note 746709 but with no results.
    Thank you pls do advice.

    Hello Pavan,
    I m pasting the url which is generated which contains all the import parameters and after pressing the approve button there is a page that comes up saying "Request approved".but that url doesnt contain decision parameter.
    http://tcscq1.hrservicesonline.com:8001/sap(bD1lbiZjPTQ1MQ==)/bc/bsp/sap/hrrcf_approval/application.bsp?objid=50002412&otype=NB&plvar=01&requestdate=20090420&requestedRsnCode=12&requestedstatus=1&requester=Dave+Bankar&SAPWFCBURL=http%3a%2f%2ftcscq1%2ehrservicesonline%2ecom%3a8001%2fsap%2fbc%2fwebflow%2fwshandler%3f_sapwiid%3d000000006031%26_saptask%3dTS51807979%26_saplogsys%3dTD1CLNT451%26_sapuname%3dAARONMINYARD%26_saplangu%3dE%26_sapxid%3d976FEC491D6F880DE1000000AC11300B%26sap-client%3d451
    Url after clicking approve button.
    http://tcscq1.hrservicesonline.com:8001/sap(bD1lbiZjPTQ1MQ==)/bc/bsp/sap/hrrcf_approval/application.bsp?objid=50002412&otype=NB&plvar=01&requestdate=20090420&requestedRsnCode=12&requestedstatus=1&requester=Dave+Bankar&SAPWFCBURL=http%3a%2f%2ftcscq1%2ehrservicesonline%2ecom%3a8001%2fsap%2fbc%2fwebflow%2fwshandler%3f_sapwiid%3d000000006031%26_saptask%3dTS51807979%26_saplogsys%3dTD1CLNT451%26_sapuname%3dAARONMINYARD%26_saplangu%3dE%26_sapxid%3d976FEC491D6F880DE1000000AC11300B%26sap-client%3d451
    Both the url are almost same,atleast the return url should contain decision parameter but its not the case here.
    What can be the problem,have any one faced similar issue.
    And what are the events/workflow steps that occur after clicking approve button.i guess it should trigger
    status change workflow WS51900005 to change the status.
    In my case if i check in swel it jus says WEBSERVICE completed event been triggered.
    Pls do help stuck in this for very long now.
    Regards,
    Sharad

  • E- recruitment requisition not functioning well!

    Hi all!
    I was doing the configuration of the SAP e-Recruitment. The problem which i am facing is that i am not able to attach the vacant position number to the requisition which i am creating. Can any one through light on this.
    Points will be awarded to the person solving the problem.
    Regards
    Saurav

    Hello Saurav,
    positions are assinged on the organizational information tab of the requisition maitanance container sequence. If you use the standard configuration it should be the 2nd tab in the recruiter view. The tab hase a "subsequence" where it is the first tab. This should be visible if not modified as customizing this subtabs will be implemented with ehp3 which is not released yet.+
    In the database this assignment is stored as releation between these 2 objects in IT10001.
    If you are on an integrated system the positions should be available. If you are on an alone installation you have to transfer the positions before assigneing the viw ALE of course. Please note that the vacant flag is not transfered with the ALE so it has no effect for E-recruiting standalone installations. You will find all positions in the search.
    If you are in an old installation you might face the problem that you miss a note which fixes the problem that positions stating in the future were not found in the search but this is quite unlikely as it is really a very old note.
    Best Regards
    Roman Weise

  • E Rec - Approval for requisition, position creation

    Hi Gurus,
    I understand that we can attach positions created in OM to a requisition at the time of creating the requsition.
    Can we create positions via E-rec process & the same can be release after workflow is approved 
    Please confirm that is thr any standard functionailty for below
    For different requisitions created approval is clubed and only one approval request goes to the assigned person in UWL
    For each requistion different approvers are assigned, eg: For HR>HR Head, Finance> Finance Department Head then Competent Authoriy.
    Where and how to incorporate checks for candidate to apply & restrict for an opening. eg: Trainees requirement and checks for age has to applied- only 30 years and below can apply. The system should restrict all other candidates on this validation.
    Restrict an candidate to apply only against a Reference no. or position title & restrict unsolicited applications.
    Please assist with your valuable comments on the above.
    Regards

    Hi Pavan & Vijaya,
       I also have requirement of modifying Standard Workflow WS WS51800008.
      I have done following setting in SPRO.
    SAP E-rec->Technical Settings>Workflow--> Click On documentation of Set Up Approval Process for Requisition (Workflow) and there it has given you the clear Explanation about defining parameters in the Txn WF_EXTSRV
    after this i did GENERATE TASK  and  it generated a new TASK. but in this config it ask for Logical system and i am not  sure  which logical system  i have  to give   so  i have kept  is  blank..
    I have also done URL settings in WF_Handcust.
    Also  in SICF when i tested my service /sap/bc/bsp/sap/hrrcf_approval/application.bsp it gives me following error...
    SAP Note
    The following error text was processed in the system:
    BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/hrrcf_approval/default.htm?sap-client=668&sap-sessioncmd=open ist nicht gültig.
    so gurus  kindly suggest me  what  should  be  done to make this workflow  running...also i m modifying this workflow to add  1 dialog  task   so do i need to make this entry foe this task in SWFVISU??
    thanks in advance....

  • Feed Has No Episodes & Validation Issues with RSS Feed

    Hello! I am beyond my wits end..having many issues getting this podcast submitted and never had such issues before. Any step-by-step help would be GREATLY appreciated!!
    Here is my feedburner: http://feeds.feedburner.com/High-achievingWomensBlogazine
    And here is the page where I have followed the instructions for the audio player and files: http://www.highachievingwomen.biz/podcasts/high-achieving-womens-blogazine-podca sts/
    Is there something I am missing for this feed to be picking up my audio files?
    (Note: since I am using feedburner, I did install the Plugins (Audio player & FeedSmith) that they recommend to use with their system as well)
    And here is what I get when I submit the RSS for validation:
    Congratulations!
    This is a valid RSS feed.
    Recommendations
    This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
    line 14, column 1689: Misplaced Item (10 occurrences) [help]... nt &amp; Marketing" /></itunes:category><item>
    <atom10:link xmlns:atom10="http://www.w3.org/2005/Atom" rel="self" type="application/rss+xml" href="http://feeds.feedburner.com/High-achievingWomensBlogazine" /><feedburner:info uri="high-achievingwomensblogazine" /><atom10:link xmlns:atom10="http://www.w3.org/2005/Atom" rel="hub" href="http://pubsubhubbub.appspot.com/" /><media:copyright>© 2011 Dr. Laureen Wishom</media:copyright><media:thumbnail url="http://www.highachievingwomen.biz/wp-content/uploads/2010/01/LW.framed.medium.jpg" /><media:keywords>Branding,Identity,Tips,Coaching,Entrepreneurs,Laureen,Wishom,Marketplace,Positioning,Small,Business,Owners,Women,Entrepreneurs</media:keywords><media:category scheme="http://www.itunes.com/dtds/podcast-1.0.dtd">Business/Management &amp; Marketing</media:category><itunes:owner><itunes:email>[email protected]</itunes:email><itunes:name>Dr Laureen Wishom</itunes:name></itunes:owner><itunes:author>Dr Laureen Wishom</itunes:author><itunes:explicit>no</itunes:explicit><itunes:image href="http://www.highachievingwomen.biz/wp-content/uploads/2010/01/LW.framed.medium.jpg" /><itunes:keywords>Branding,Identity,Tips,Coaching,Entrepreneurs,Laureen,Wishom,Marketplace,Positioning,Small,Business,Owners,Women,Entrepreneurs</itunes:keywords><itunes:subtitle>Global Association of High-Achieving Women</itunes:subtitle><itunes:summary>This association is designed to gift the members with the tools and techniques to gain a competitive edge in the marketplace and assist the members in moving up, moving out or changing directions with ease, purpose and clarity.</itunes:summary><itunes:category text="Business"><itunes:category text="Management &amp; Marketing" /></itunes:category><item>
    Thank you!!

    Your feed has no media files referenced. Your web page has embedded audio players: these won't work in the feed. You need direct links to the media files, which should be mp3 or m4a, not rm, swf or wma. These links have to be contained in an 'enclosure' tag for each episode.
    This page eplains the basics of making a podcast and includes a sample basic feed soi you can see what I'm talking about:
    http://rfwilmut.net/pc
    I'm not suggesting you should write your own feed, but the page will tell you what to look for in a feed.
    You're using Wordpress: it's not really generating a podcast feed. You may need to add the PodPress plugin - I'm not sure whether you can get a podcast feed out of WordPress by itself - I'm afraid I can't advise on this.
    You can ignore the FeedValidator comment - it's only because you have the 'item' tag at the end of a line, and this doesn't matter.

  • Validation Issue - urgent

    Hi experts,
    I am facing a peculiar issue with Validation Check, in Process Control.
    I have done the following:
    1. set the Validation Top account, in my AppSettings
    2. Enable SupportsProcessManagement - in appropriate scenario
    3. Manage Submission Phases is set to * - in Phase1 column - My Validation Account's submission Group is set to 1.
    4. I have 4 independent Validation hierarchies, each one, having a submission group as 1, and are set in ValidationAccount, ValidationAccount2, ValidationAccount3, ValidationAccount4 respectively.
    When I plot the Validation Account, in a data grid, I can see values, coming in the grid.
    However, when I start Process Management, the Pass / Fail, is showing as Pass, even if there is value in the Validation Accounts
    When I click on the Validation Pass / Fail icon, the Validation Report inside, shows blank - not even a Zero value - throughout the grid. As a result, the entity is able to promote to the next review level, even if Validation is not cleared.
    Is there any setting, which I am missing out on, which is not showing Validation errors, whereas I can see Validation values in the Data Grid?
    thanks
    Never mind.. I found out the issue.. It was related to Rules and Metadata setting.
    Edited by: Indraneel Mazumder on Aug 2, 2011 10:50 PM

    I'm also facing the same issue,may i know what changes you made in metadata.quick reply is appreciated.

Maybe you are looking for