E Recruitment Standalone system needs to connected with portal

Dear E rec experts
I am having e rec standalone system and a SAP HR system , Presently portal is connected with SAP HR system, I need to connect the portal to E rec server as well . Our Basis team did the SLD and SSO configuration , and portal system object also have been created to point the portal with Stand alone system . still i can not connect to e rec system with the portal.
Can any help with the java connector component name for e rec stand alone system with HR system , if jico is the solution for this issue.Else Please advice me any other solution -
Regards
Abhi

Hi Abhi,
Jco is for Java components. E-recruiting does not use Java Web Dynpro, but rather BSP and ABAP WD.
You link the systems via RFCs:
Call SM30, table T77S0 and check following parameter:
in RECFA HRRFC the destination to the HR system should be maintained
for this destination you can check if the connection is working by going to transaction SM59 -> ABAP connection -> double-click on the name -> button "connection test" to confirm the connectivity.
Afterward, you have to create the ALE distribution model so that you can transfer data via PFAL tcode and check the received Idocs on T-code BD87.
Regards,
Bentow

Similar Messages

I have done the softer update and now this system request a connection with a meanie HD and I connector for iTunes I don't understand why ?

I have done the softer update and now this system request a connection with a Mini HDMI connector for iTunes I don't understand why ?
DO I HAVE TO HAVE THE MINI HDMI CONNECTOR TO COMPLETE THE SOFTER UPDATE PROCESS ?

You might be seeing a Micro USB cable (Not HDMI) that is because your Apple Tv is in Recovery Mode due to some reason and it needs to be Restored by connecting it to iTunes on your Computer. So if you have a Micro USB cable ( which comes with Android Smart Phones ) then try to connect your Apple Tv to your computer using the same and with the help of iTunes Restore your Apple Tv to Factory Settings. Go through the below Apple Support kb which says " If your Apple TV still does not respond or if you were unable to follow the above steps "
http://support.apple.com/kb/ht4367

My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

What are the partner system(R/3) connected with APO

Hi All,
Can some buddy help me in checking what are the partner system(R/3) connected with APO.
Let me explain my requirement in brief.
I have Login in one APO system, but i donu2019t know the partner R/3 system available for it.
So from where i can get this information ......?
Regards

Hi SCM APO 22,
Try the below menupath in customisation
spro > sap guide > apo > integration with sap components
        > Integration via APO Core Interface (CIF) >
               > Basic Settings for Creating the System Landscape
                    > Set Up RFC Destination
Please confirm
Regards
R. Senthil Mareeswaran.

Cannot download book. ..the system is already connected with an other apple id. ???

My Mac is used from me and my wife with two different users on the System.
Wa are also use iPhone and iPad.
My wife purchased a ebook with the iPad in the apple store. Now she would like to read the book on the mac.
But when she would download the book she got the messages, that the system is already connected with an other apple id.
How can we fix this? And why connected with an other apple Id?
Thanks for help
Regards
Andy

Each device can only be authorized for one Apple ID at a time, and the authorization can only be changed once every 90 days.

Open and close RFC connection with portals...

Hi Experts,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
Please advice is it possible to achieve this. If yes, then how.
Regards,
Guddan

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

Issue in Data transfers using ALE for E-Recruiting standalone system

Dear Experts,
We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
we have created iDocs using the following filters.
For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
For Objects O,S: 1032, Subtype: 0010
For Object: 1001, Subtype: A003, A008, A012, B007
For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
For Objects: C, O, S, Subtype: 1000, 1002, 1028
For Object:C, Subtype: 1001, Subtype: A007
When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
For some users I am getting 51 error where i could not transfer any data.
For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
Where will be the issue? How can we resolve this?
Any help will be appreciable.
Thank you in advance.

Hi Sekhar,
Have a look over these threads.
Errors in ALE data transfer to E-Recruiting.
http://scn.sap.com/thread/1535402
BR,
RAM.

I need some help with Portal - LDAP connection

Hello...
Can some one please help me with an issue I have when I try to connect a Portal in version EP6.0, with an LDAP, I go to System Admin --> System Config --> UM Config --> LDAP Server, Test the connection, it's successful, then restarted the server, but I still can't see the users at the LDAP.
Hope some one can help me soon.
Miguel

Hi Miguel,
After Configuring LDAP to UME portal,You need to create users in the LDAP.Then only you can see the users when you go to user admin->users->search for the user
1. What happens when you give * to search users?
2. Are you sure that you have mapped attributes of the user properly in data source configuration Xml file..
3 Which LDAP server you are using.
Cheers
Rani A

Just got the Iphone 6 and it paired BT with the car phone system okay. But it will not pair with the audio part where I could play my recorded music with my 5-C. The system will not connect with the phone and the message is that the settings

My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player". Message says for me to adjust the player. On the phone it is searching for other devices but not connecting. Now same phone is paired with the car multimedia system and will take and make calls. Help!

I very much doubt it if you consider how much data Apple release to App developers
to allow them to create apps that work under iOS
Audi being lazy like most of the other motor manufacturers
They will be registered developers and as such get all the info and data they need

System Center Orchestrator connectivity with System Center Operations Manager

Hi,
I am trying to connect my SCORCH setup with my SCOM server. When I enter the SCOM Server Name or IP Address, Domain, USer id, and Password in the Connectivity Prompt of SCORCH, and click on TEST Connections, I see a red error prompt with the labl error
and nothing written on it. the user id has rights on both SCORCH and SCOM environment.
Is there a log file that I can refer to validate the exact error that is happening when I connectin SCORCH with SCOM?
Thanks
Sandeep C
Sandeep C Learn more about IT @ schadda.blogspot.com Please mark this post as helpful if it was helpful :) Also mark it as a proposed answer if it turns out to be the final solution

Stefan is right.
You need to install the OM Console
"Install the Operations Manager console on each computer where an Orchestrator Runbook server or Runbook Designer is installed, if that server needs to interact with Operations
Manager"
Described here: http://technet.microsoft.com/en-us/library/hh830690

Since 1 year after replaced my iphone from mobily my iphone need to connected with itunes every time i changed the SIM card

the problem that I have facing when change the SIM card the mobile told me please connect with iTunes even Mobily SIM's.
iPhone 3G 16G Black
Old
New
IEMI
011773008768573
011932008420730
SERIAL NUMBER
88903YM4Y7K
5K9401QZY7K
Appreciate your support to solve this issue.

Sorry to butt in again:
But your original post(s) were not so clear.
So if your original phone WAS locked and the LOCKED one got replaced from the APPLE store...then there is a 100% chance it IS locked.
Sorry, but there is no such thing as a free lunch...
Check with Apple anyways...

My system can not connect with the Airport Express while the signal is very good?

Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
Several specialists have checked but can not solve this problem. Any ideas?

I am in exactly the same boat...

What cable for macbook pro needed to connect with LCD projector

I ordered a Mini DVI to VGA adapter, but it doesn't fit into my laptop. What connection do I need for a connection

if you do not have a Mini DVI, that leaves only about 80 models of MacBooks.
Which one do you own?

Need video connection with daughter in Europe

My daughter is off for a college Semester Abroad - would love to talk and see each other with iChat - I have a wonderful Mac, she's stuck with her PC labtop.
Any suggestions for us? I read the threads, ideas include iChat and/or Skype??
Not very computer savvy, so need "basic" easy to do!!!
Thanks again!

I have been trying to hook up an exchange student at our school with her family in Norway. So far, iChat has been a nightmare in the PC-Mac communication for us without all kinds of adjustments on both ends. We both downloaded Skype and we were seeing and talking to each other in less than 10 minutes (no kidding!). The picture quality I got was a little less than what I had on iChat, but that was my only loss. So far, everything has been great with no dropped calls, no computer adjustments, just communication. This is my suggestion for you if you want something easy. Just check the Skype site for minimum requirements for both computers.

Db2 database needs to connect with BI

Hi,
is it possible to connect DB2 database using DB connect.
Please give step by step guide to do this.

please go through this-
ETL PROCESS WITH DB2
hope it helps,
rgs,
Parth.

E Recruitment Standalone system needs to connected with portal

Similar Messages

Maybe you are looking for