E-Recruitment start pages ehp4
Hello experts,
How to configure e-recruitment / e-recruiting ehp4 start pages for external candidate, internal candidate? Also how to enable/link recruiter and administrator pages from the portal?
Help please
Danny
Hi,
SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> Set System Parameters
SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> User Administration.
SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> Periodic Services -> Define Periodic Services / Activate Periodic Services / Determine Rules for Periodic Services / Schedule Background Process for Periodic Services. Setting up business partners You must create a number range interval for SAP business partner. Ensure that an interval is indicated as 'standard internal'.
SAP Customizing Implementation Guide -> SAP E-Recruiting -> Technical Settings -> SAP Business Partner -> Set SAP business partner for E-Recruiting / Define Number Ranges / Define Groupings and Assign Number Ranges.
SAP NOTE : Note 874725
All the BEST
KRC
Similar Messages
-
Unable to access E-Recruiting Start Pages Externally
Hello,
Im hoping for some assistance with an E-Recruiting issue (standalone system; Version 3.0). We are currently only able to access the start pages while inside of our network, and receive a page cannot be displayed message while outside of our network. This is with the exception of the candidate registration page. We can successfully register, and then pass on to the main E-Recruiting start page for an external candidate.
The hrrcf_start_int bsp/service is used to call the start page for registered internal candidates, recruiters, and administrators (different view for each). The hrrcf_start_ext bsp/service is used to call the start page for registered external candidates. And, the hrrcf_cand_reg bsp/service is used to access the external candidate registration page.
The URLs for the start pages were created using program RCF_GENERATE_URLS. We are requiring all traffic be routed through our WebDispatcher, and all traffic be HTTPS, so the URLs start out with https://recruiting.... Our E-Recruiting system is actually careers, but again, we want all traffic to go through our WebDispatcher, which is recruiting.
We have created external aliases in transaction SICF for all three URLs, and using the alias, I can successfully login to all pages within our network. When I test the external aliases within SICF, I get an internal error (The user is not assigned a candidate or an employee) for the hrrcf_start_int and hrrcf_start_ext services. When I test the external alias for hrrcf_cand_reg, it is successful.
When I test the hrrcf_start_int service within SICF, I get the logon page, but after logging on, I get message Name of logical port&&lp_named is invalid. When I test the hrrcf_cand_reg service, it is successful.
When I test the hrrcf_start_int and hrrcf_start_ext BSPs in SE80, I receive an Internet Explorer cannot display page message. The same is true for the hrrcf_cand_reg. However, it is trying to access http://recruiting instead of https://recruiting. I can see that URL address in the application.do Controller, but have no idea where to change it, because it is greyed out (any help with this would be appreciated as well.)
We have created internal users using program RCF_CREATE_USER, and when I look at transaction BP, I see that it is creating a business partner for each user.
We have had SAP tell us that it is not a WebDispatcher issue, and we have also confirmed that it is not a firewall issue.
It seems interesting to me that we can only get to the one page that does not first require authentication. If anyone has any information that would be helpful, I would appreciate your time.
Sorry for such a long message, but I was just trying to be as clear as possible.
Thank you,
Leeanna TravisHello Leeanna,
quite a lot of topics and doing remote analysis for netwok issues is difficult.
Some ideas:
- starting hrrcf_start_ext / hrrcf_start_int via SICF or SE80 will never be successful as these applications need parameters. The message you got when testing startpage from SICF is classical for invalid startpage Id
- if you do not reach pages from outside, check network traffic / access rights in firewalls. Usually the sap server name cannot be resolved through a dns for an outside call as you companies dns is not visible for internet users. You will need a relay.
- check that full qualified server name is set on the server
- check eeb infrastructure that it allows the access protocoll. If ICF service says http but firewall only allows https you won't get a responde. Sometime switching protocolls within the request produces problems.
- WebDispacher is known for eating parameters / url parts. Try to get your hands on the traces of the requests which really reach the server.
- if possible supply some more information on release & support package level. E.g. there is a support package which has an error that if you activate 'do not show https warning' in an icf service it does not only hide the warning but the whole logon screen :o(
Hope that helps, if not just reply - perhaps w/ focus on one special point.
Best Regards
Roman Weise -
E- Rec - Hiding links - Create / copy requisistions in Recruiter start page
I use a MSS view for creating Requisitions and hence want to hide Create / Copy requisitions link in Recruiter start page --> maintain requisitions.
Cn it be done with context changes. If yes, Can some one provide some info on the steps required.
Thanks
G RajHi,
if you want to change the the appearance (grouping, links, texts) of a startpage this is completely done in customizing or better said you can define your own startpages and use some parts of the sap delivery if you like. The customizing for sartpages can be found in the IMG (T-Code SPRO) under SAP E-Recruiting -> Technical Settings -> User Interfaces -> (Settings for User Interfaces with Business Server Pages (BSP)) -> Start Pages.
We usually define customer startpages in every project, this is really no big deal.
If you want to remove a link from a page you should start by analysing the standard startpage as you will have to "rebuild" it. The standard startpage for the recruiter is 0003. Important to know is that IMG only contains customer customizing. The sap standard delivery is stored in own tables which can only be accessed using table tools e.g. SE11 or SE16.
The tables for startpage customizing are named T77RCF_SP*:
T77RCF_SP_ID(C) - Startpages
T77RCF_SP_ID(C)T - Startpages texttable
T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
T77RCF_SP_LINK(C) - Links
T77RCF_SP_LINK(C)T - Links texttable
T77RCF_SP_ASID(C) - assignment of groups to startpages
T77RCF_SP_ASGRP(C) - assignments of links to groups
The table without C is the standard delivery, the one with C is the one for customer customizing.
Just take a sheet of paper and start by getting all groups to the startpage 0003. This should be 1005, 1000, 1001, 2000, 1002, 1004, 1003 but could differ depending on release and support package. As you only want to change the 2nd group you will be able to reuse the others. Next get the links to the group you want to change. In my system it's group 1000 which contains links 1000, 1001, 1003 and 1004 according to T77RCF_SP_ASGRP.
When you have this info you can start customizing your own startpage. you will need to create a new group in the IMG node -> Define Start Page Groups. Just use the information you find in the standard delivery and assign the 3 links you want to keep. Then create your startpage and assign the standard groups and instead of 1000 your own.
Althought it is possible to use the same numbers for IDs like SAP I prefere using 9NNN for the ids so you always know if its standard or customer. furthermore do not forget to udate your authorization roles and add the new startpage.
Best Regards
Roman Weise
PS: of course it is your decision to hide links. But even if the managers create the requisitions using MSS the recruiters will work with their startpage only and they will have to be able to create and maintain requisitions so i am not sure if hiding the link is a good idea. -
E-RECRUITING Start Pages and WebDynpro
Hello All,
I need to implement a new Link in E-Recruiting Recruiter Start Page.
But my new link is an ABAP WebDynpro and not a BSP application.
I followed all steps of creation.
I Created the OTR Links, and the entries in tables: T77RCF_SP_GROUP, T77RCF_SP_ASID, T77RCF_SP_LINK and T77RCF_LOG_APPL.
I can see the link in the Start Page of Recruiter.
But when i click on it, the follow error is displayed:
BSP Exception: the Application Name erc_a_class_ui_ps in URL XXXXXXXXXXXXXXXXXX is invalid.
I have no experience with e-recruiting, but i think in the T77RCF_LOG_APPL is possible to enter only BSP apllication. Is that correct?
If yes, how can i to point an ABAP WebDynpro apllication?
Thanks.Hello João Mariano,
As you know that you need to maintain your entry in the view table V77RCF_SP_LINKC or T77RCF_SP_LINK
and link the same entry in V77RCF_SP_ASGRPC Assignment of Links to Start Page Groups.
Prerequisite:
Start page link : 9001
Name : XYZ
OTR Alias Link :
External URL as ' https://mail.google.com/mail/#inbox ' or Web Dynpro ABAP URL with https://
I am sure it will work i have done this for you in my sand box however I am unable to attach the document.
Thanks & Regards
Ravi Sabba
Certified SAP Talent Management Consultant -
I'm currently implementin E-Recruiting, and I find some problems due to delivery customizing missing entries in "Define start page" step. Could anyone provide customizing entries in tables:
define start page, V77RCF_SP_IDC,
define start page groups V77RCF_SP_GROUPC
define links for start pages V77RCF_SP_LINKC
Thanks a lot in advance
ChristianHello Christian,
the E-Recruiting tables T77RCF_SP_C (and so the views V77RCF_SP_C) do not contain any entries in the SAP delivery. These tables are customer only customizing. The SAP standard entries for startpage customizing are stored in the tables T77RCF_SP_* - that means the same name without C at the end. E.g. the customizing table T77RCF_SP_IDC contains all customer difined startpages - there is the table T77RCF_SP_ID which contains all SAP delivered startpages. These tables are not displayed in the IMG but refered in most search helps.
E.g. if you add a link to a customer startpage group the search help displays all sap delivered links (T77RCF_SP_LINK) and the customer defined ones (T77RCF_SP_LINKC).
Best rgds.
Roman
If you want to have a look at the SAP delivery you have to you any table access transaction (SE11, SE16, SM30, ...) -
Removing e-recruiting start page links
Hi,
I want to remove some links from start page of recruiter. After some debugging, i found two views through we can maintain the links for start page. These are the views i found:
V77RCF_SP_ASGRP
V77RCF_SP_ASGRPC
To my understanding, view V&&RCF_SP_ASGRP is a standard view which can not be modified ( i get a alert "do not modify sap data") and the view V77RCF_SP_ASGRPC dows not have any entries by default and is customizable.
Can I make use of these views to remove some links on start page of recruiter? If yes... how can I do that?
Can some one help me??
Regards,
NrisimhaRemoving links in a start page is done in configuration. You have to create your own start page group and assign the links. You will then assign the group to your won start page. All this is done under - under Technical Settings -> Start Pages. Since you will be creating a new start page you have to assign this new start page in the authorizations to the role of the person who will be accessing the start page.
-
Hi,
Is it recommended to copy and use the standard start pages of E-Recruiting?
- SureshHi Suresh,
Can you please let me know exactly what are you planning to copy? Do you mean you will create a new start in configuration(SPRO) OR do you intend to copy the BSPs relevant to the std start pages? Cause copying the std BSPs will take a lot of time and effort. I would not recommend that unless the solution required is absolutely not addressable with std pages. Also, the std flexibalizations available with std start pages will not be available to the copied ones.
- Ravi -
E-recruiting start pages candidate selection
Hi,
Can anyone tell me how and when the column 'unread' is filled in the overview of the requisitions when you have chosen the entry 'candidate selection'.
Kind regards,
RuthHi,
In the candidate shortlist. whenever a candidate has applied or you have added the candidate from the talent pool to the requisition it is by default unread.
Now when u select the requisition and go to assignments you see the list of candidates.
Now you can select the candidate and make it read or unread as required.
Unread / Read is used the the recruiter to maintain a tag against a candidate that whether the resume has been read or not. There is no automatic change of read or unread on reading a candidate details, it is done manually by the recruiter.
Regards,
Divya -
E-Recruiting Start Page configuration from Registration
Hi all,
I have used a web dynpro application configuration to hide various fields in personal details. When I log in as an external candidate this works correctly. What I now need to do is make sure that when a new candidate registers that they akso get this configuration. (It has to be done via the url as it is only in specific cases).
Does anyone know how (other than enhancing HRRCF_C_REGISTER_UI)?
Thanks
RichHello Rich,
You just have to create a component configuration for HRRCF_C_REGISTER_UI and set there parameter 'candidateStartpage' (tab component-defined) with the candidate configuration you want to use.
Regards
Nicole -
Hello
E-Recruiting 300 Start Pages
In DEV & QA, we have been using the standard start pages for internal employees and the recruiter pages. The pages were displaying correctly without any problems.
In the production system, these pages are not the same as in DEV & QA, there's also german headings.
All transports are in PROD, and the tables looks exactly the same. I've generated the URLs, the services are activated.
Can you please assist me. What could be missing?
Thanx.Hello,
first of all you should ensure that all languages you installed in dev & qa are also in prod if you have added languages.
Check that you use the correct links including sap-language and BspLanguage. This also includes the links really routed through the whole web infrastructure. A web application firewall or other components can mess up the parameters so they do not really
get to the WebAS and the users are logged in in the wrong language.
Of course run the report or the function from sotr_edit which adapts the contexts of all OTRs.
If this asll does not help check compare the systems withb SCU0.
Best regards
Roman -
E-recruiting - Customizing external candidate start page with a new start p
Hi ,
I require some inputs from you on creation of new start page for external candidate.
I have a requirement to hide Age / Gender fields in the Personal data tab of the external candidate application wizard in the external candidate start page.
I Created a new start page with I.D "9001" and using customized context i was able to hide the Age and Gender fields. The URL using the customized context looked like below;
http://XXXXXX.XX.XXXXXXXXX.XXX:8053/sap/bc/bsp/sap/hrrcf_start_ext?sap-client=300&sap-language=EN&rcfSpId=9000&rcfContext=NAEXT
The external candidate start page requires the following services assignment to a service user;
hrrcf_apply_ext: Apply with Reference Code (Non Registered Candidate)
hrrcf_cand_reg: External Candidate, Registration
hrrcf_unrg_srch: Non Registered Candidate, Job Search
The service user requires SAP standard role u201CRCF_EXTERNAL_CANDIDATEu201D to provide access to any external candidate to do a job search and register. This role in standard would have application object u201C0002u201D u2013 Standard external candidate start page I.D which would provide access to the start page.
We have cloned the role to include the customized application object u201C9001u201D and have assigned it to the service user.
But even after doing this i get an error message when trying to execute the URL in IE which reads "You do not have the required authorisation to use this start page"
Iam not sure if iam missing anything on the authorisation part. Please advise.
Thanks
G RajHello G Raj,
it seems you are mixing some things up. The service user is only for all parts of the e-recruiting which are accessable without logging in. This includes services linked to the unregistered search and the registration (where the applicant creates his candidate / his login). The service user is no candidate and has a special role (must not have a candidate object or the candidate authorization role).
As soon as someone logs into the system, e.g. to his start page, he acts as candidate. Depending on his relation to a P object he is either an external or an internal candidate.
In your example we are talking about external candidates. These candidates get a reference user assigned on candidate creation which is customized for the external candidate role (here the e-recruiting role) in IMG. Usually it is called RCF_CAND_EXT. The SAP delivery role (here the authorization role) this reference user gets is SAP_RCF_EXTERNAL_CANDIDATE (as long as you are using BSP). You have to copy this role to a customer one and replace the value 0002 of auth object P_RCF_APPL (Application in E-Recruiting) by your customer one 9000.
Then everything should work fine.
Best regards
Roman Weise -
E-Recruiting :Webdynpro for ABAP start page modification
Dear Experts,
We will be using the wbdynpro for ABAP screens for candidate profile for a succession planning implementation.
We have a requirement to change the start page as well as the candidate profile screens.We need to change the overview screen as well.
In the IMG activity,i can see the node to change the start page.
Can someone please help me out with the following :
1) Start page id : I can specify 9NNN
Config id : ???
What exactly is the config id? i am totally new to webdynpro technology & webdynpro ABAP.
Documentation says "Enter the Web Dynpro configuration identifier (component configuration ID of the start page component) that defines the start page variant."
I went to SE80 & found the component for the start page & even went to the editor for component configuration(this opens in a browser).
Should i create my own configuration id here?
what else do i need to do.
2) After creating the configuration id & creating a custom start page,how will the standard link to the webdynpro start page be modified? how do i refer to this custom start page?
Please help as it is a matter of urgency.Assistance will be appreciated & rewarded.
Thanks in advance.
SowmyaDear Rajeev,
Thanks for the quick response.
The entry in the table T77RCF_WD_SP_IDC will be taken care through the entries in the start page of the IMG activity.But do this i need to know what is config id. Can you please help me with this.
We cannot make changes in T77RCF_WD_SP_ID.
Regards,
Sowmya -
The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
I was told i was using an out of date version of Firefox.
But no "click here to update".
So i downloaded the new edition of Firefox.
And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
HEEEELP,,,,,,Hi,
Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
Apple Start page no longer works with Safari 1.3.2?
I just set up an iBook G3 with Mac OS X 10.3.9, with all updates, and opened Safari, which is set to got to the Apple Start page initially:
http://www.apple.com/startpage
Safari loads the page, but two areas are blank: the "Hot News Headlines" in the middle of the page, and the "iTunes Movie Trailers" on the left side. No content appears in these areas. If I click on the "All" next to "Hot News Headlines" a page of html-code text appears.
When I load this page in Firefox or Camino, these areas have the expected content: text in "Hot News Headlines" and a picture in "iTunes Movie Trailers".
I know Safari 1.3.2 is pretty old now, and cannot be upgraded to anything later, since it's integrated with 10.3.9; for this reason I recommend using a more current browser such as Camino or Firefox with this System. But I was just wondering: has anyone else seen this behavior? Is Apple's own web page now too much for Safari 1.x to handle?{quote}
When I load this page in Firefox or Camino, these areas have the expected content: text in "Hot News Headlines" and a picture in "iTunes Movie Trailers".
I know Safari 1.3.2 is pretty old now, and cannot be upgraded to anything later, since it's integrated with 10.3.9; for this reason I recommend using a more current browser such as Camino or Firefox with this System. But I was just wondering: has anyone else seen this behavior? Is Apple's own web page now too much for Safari 1.x to handle?{quote}
Hi HandyMac,
Yes, Safari v1.3.2 is quite dated by today's standards. And yes, the Apple StartPage doesn't work for me either 100% on Safari v1.3.2.
Most Panther users have migrated to Camino. FireFox 2 is no longer updated for Panther either.
On Panther I use Opera and SeaMonkey.
-Mike -
The most recent incident was today but it has happened in the recent past. I was working on a website, filling out an account creation form to begin accessing a secure website. I was almost finished when I was switched back to firefox start page with google. This happened twice, doing the same thing.When I go back to the page it's blank and I have to start again.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.
Maybe you are looking for
-
Is this Possible to have Goal Values Based on Universe
Just as we create metrics based on universe and refresh them to populate pm repository (ci_probe_value tab). Similarly can we have goals getting the values from the universe. Please guide me if this is possible. Instead of having fixed/auto-filled va
-
WiFi self assigned IP and no internet connection after OS & iTunes upgrade
I have two likely related issues that started as a direct result of upgrading to OS X 10.8.5 and/or iTunes 11: Starting tonight, after upgrading my OS and iTunes I am no longer able to use Home Sharing between my iMac and Apple TV. Apple TV is logged
-
Hello, I am using the Weblogic Server 9.1 and I typed the following command: java weblogic.Deployer -adminurl t3://myserver:7001 -user weblogic -password abcx -listapps and the result was: remoteWar [Version=1.1.0] remoteWar [Version=1.1.7] <ACTIVE V
-
Time stamp table BWmo2_timest
HI all can u some one please tell me where to find this table(timestamp) and how do u find out which record has been sent to bw and which is waiting to be loaded.. k.mohan
-
Hello All, I am using Frameset inside the JSP page in NWDS,when i try to run this,it showing a blank page. JSP coding is, <% String webpath=componentRequest.getWebResourcePath()+"/";%> <html> <FRAMESET rows="100, 200"> <FRAME src="<%=webpath%