E-series to SharePoint over https

The Windows Mobile 5 devices can all connect to a secure SharePoint website.
E62 and E61i devices connect but cannot get past the credential check.
Why?

Hi Michael,
Would you please let me confirm current situation of this issue? Did this method (Add the HTTPS site to Trusted
sites) help you to solve this issue completely?
If this issue still persists, please open Event Viewer and check if you can find some relevant events. It may
help us to go further. Meanwhile, please run
SBS BPA and fix all that it can find, then monitor the result.
If any update, please feel free to let me know.
Best regards,
Justin Gu

Similar Messages

  • Windows Integrated Security with SSRS, Sharepoint 2013 and SSAS over http

    I have the following setup and problem:
    Sharepoint 2013 with SSRS in Sharepoint integrated mode
    SSAS 2012 SP1 with http access (IIS + msmdpump) enabled on the same box as SSAS
    Every component I have tried works fine with this (PerformancePoint, .bism connections, SSIS packages etc.), connecting over http using Kerberos and windows integrated authentication.
    SSRS (.rsds) connections in Sharepoint fail a connection test when using the same http connection string + Windows integrated authentication which works for everything else. The error is: "Unsupported data format: -> Microsoft.ReportingServices.DataExtensions.AdomdTestConnectionException:
    Unsupported data format:"
    SQL server profiler shows that the windows username is reaching the SSAS server is all cases.
    Kerberos delegation is set up for SSAS and is working.
    Switching the .rsds connection to saved credentials (same user as I tried with Windows integrated auth) works fine and SQL server profile logs look the same as the Windows integrated case.
    So, everything seems to work with Kerberos + http apart from SSRS ... any idea welcome. I did read that SSPI is not supported for http connections but then again, there are sites which give examples of exactly such connection strings. I can't find any
    mention of this case or exact problem anywhere ...

    For information, this was fixed by applying the .NET 4.5.1 patch as advised by MS support. Now http connections from integrated mode SSRS work ok.

  • SBS 2008 - SharePoint Connect to Calendar over HTTPS not available

    Hello,
    We have a client with a SBS2008 server using SharePoint internally without any issues through http://companyweb.
    Recently the Port forward (TCP-987) has been completed and the website loads with the correct certificate through the https://remote.domainname.com/RWW and then into the Internal Website http://remote.domainname.com:987.
    Internally we can configure the outlook clients to connect to the SharePoint client with the "Connect to Outlook" Action item, this works great. However if you navigate to https://remote.domainname.com:987/
    and try to do the same thing the "Connect to Calendar" and the button is not available to click on. This also doesn't work when
    externally either. It appears to only work over HTTP. Ideally I want to run this over HTTPS so the end users when remote aren't using VPN
    for access to the information. 
    Is this feature only available over HTTP? I was thinking it might come to the password prompt I receive when ever trying to log into the SBS Website over
    Https://.
    Any nudges in the right direction would be great!
    Thanks,
    Michael

    Hi Michael,
    Would you please let me confirm current situation of this issue? Did this method (Add the HTTPS site to Trusted
    sites) help you to solve this issue completely?
    If this issue still persists, please open Event Viewer and check if you can find some relevant events. It may
    help us to go further. Meanwhile, please run
    SBS BPA and fix all that it can find, then monitor the result.
    If any update, please feel free to let me know.
    Best regards,
    Justin Gu

  • Exchange 2013 SP1 - Unable to test Mapi-over-HTTP Outlook Connectivity

    I've configured MAPI over HTTP in my testing environment. It is working fine. But i'm unable to test this configuration using the Powershell Test-OutlookConnectivity CMDlet.
    Outlook is working fine and is using MAPI over HTTP, so i'm pretty sure there are no configuration problems. But the CMD-let gives me the following output:
    [PS] C:\Windows\system32>Test-OutlookConnectivity -RunFromServerId <myserver> -ProbeIdentity OutlookMapiHttpSelfTestProbe
    WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for
    invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id 241.
    Failed to find the probe result for invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id
    241.
        + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], InvalidOperationException
        + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Exchange.Management.Tasks.TestOutlookConnecti
       vity
        + PSComputerName        : <fqdn of my serer>
    Does anyone have a sollution for this?

    Hello @all,
    I got the same issue. The configuration is functional (Outlook connects over http). But the test-cmdlet raises this error. Is there any solution?
    Greetings from Germany

  • IOS Safari wont play quicktime over HTTPS

    I have a video that streams from Apache (Mac Web Sharing) OK to Mac OS X Safari and Firefox, and to Safari on my iPhone and iPad.
    However, when I put the same video on a Mac OS X Server with SSL enabled (self-crtificated) I can view the video via Mac OS X Safari and other browsers using HTTPS, but not on my iOS devices.
    I have recreated this problem on multiple servers and clients, and my client is also seeing the same thing (same video streamed from an IIS/SharePoint server.)
    Can anyone shed light on this?
    Regards,
    Paul Adams,
    Vancouver, BC.

    Having the same problem. Here should be a solution https://devforums.apple.com/message/361209#361209
    It says following:
    After experiencing the very same problem and symptoms, I was able to gain access to the Apple Developer Forum thread mentioned here (https://devforums.apple.com/message/361209#361209)
    The upshot of the Apple thread is that you must have a valid Intermediate Certificate installed on the server. It is not enough to have only the server certificate installed.
    I have tested this with Mac OS X 10.6 Server. I installed the server certificate and while desktop browsers were able to stream a video over HTTPS, iOS devices (iPhone and iPad) both gave the "This movie could not be played" error.
    Installing the Intermediate Certificate fixed the problem.
    Other devices, like Android phones and tablets, and RIM PowerBook (via Flash) had no problems playing the video without the Intermediate Certificate. I suspect it is a case of iOS being overzealous with its security, a "Feature" if not a bug ;-)
    My question is: Where and how do I install the Intermediate Certificate? On the iPhone or on the Apache Server?

  • Is it possible to call API over http(not on ssl) from inside a secure page which is on HTTPS

    Hi Guys
    We are running a httplistner on localhost exposing http based end point. can we call this url from a website which is exposed over https when it opens from the same machine.
    Note: the site is being opened in browser is using HTTPS and is on SSL.
    if possible can some one please help.
    regards
    Mukesh V

    hjuarez wrote:
    Please re-read my first post. I think it is clear.I disagree.
    I want to import a dll It is not clear if you are aware that .dll files are a windows thing.
    but I have to run the java code on a solaris box
    in order to use its methods in java, It is not clear if you are aware using .dll files in a Solaris environment has nothing to do with Java.
    My question was if there is a solution -or not- that faces this kind of issues.It is not clear if you are talking about Sun Solaris or x86 Solaris.
    I don't know if it makes any difference, but it might.
    Maybe your question is: why this guy wants to do something like this?No. I am not concerned with that.
    Just trying to help you ask the right questions.
    And maybe you will find the answers yourself once you have the right questions.
    I'm integrating some biometric solutions on Sun Access Manager. But the biometrics vendor only provides windows ocx's and DLL's. And Access Manager is running in a Solaris box.
    I want to know if I can do something by myself or just tell the biometrics vendor that they must provide a Java solution.
    I have been trying to find something on the web, but I asked this forum because maybe someone has tried to do something similar.The suggestion by jschell is probably your most promising option.
    Integrating the .dll files with Java on a Windows box
    and communicating between Access Manager / Java on the Solaris box and your Java code on the Windows box
    (possibly using RMI).

  • Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

    Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

    Hi,
    You didnt mention which version of IWS. follow these steps.
    (1)Goto Web Server Administration Server, select the server you want to manage.
    (2)Select Preference >> Perfomance Tuning.
    (3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
    (4) Apply changes and restart the server.
    *Setting the timeout to a lower value, however, may    prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before   the connection is closed is 432000 bits (2400 multiplied by 180)
    Regards
    T.Raghulan
    [email protected]

  • MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

    ENVIRONMENT
    -1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
    -Exchange 2013 public folders
    -Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
    Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover.  Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
    are seen.
    We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate.  We set the security to ntlm, negotiate on the mapi virtual directory.  We reset IIS and enabled mapi over http in
    the org config.  We run in to problems here.
    Outlook 2010 clients appear to be working fine.  We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
    Outlook 2013 clients are having problems.  As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
      This logon prompt should not occur.    We can confirm that it is connecting via MAPI HTTP and Negotiate.
    If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013.  We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
    I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind.  I would think the same issues would occur with Outlook 2010 but they do not.  I am not sure how to resolve this and I am looking for help.

    I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
    working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
    Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
    HTTP enabled all options are grayed out (please correct me if I
    am wrong):
    This is a very annoying thing – does anybody else have the same problem?
    Any suggestions on this?
    Marc

  • [solved] Owncloud over SSL: http works, but over https only apache

    Hello,
    I try to setup owncloud with SSL.
    Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
    (I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
    How could I make the owncloud site available over https?
    relevant files:
    owncloud.conf:
    <IfModule mod_alias.c>
    Alias /owncloud /usr/share/webapps/owncloud/
    </IfModule>
    <Directory /usr/share/webapps/owncloud/>
    Options FollowSymlinks
    Require all granted
    php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
    </Directory>
    <VirtualHost *:80>
    ServerAdmin [email protected]
    DocumentRoot /usr/share/webapps/owncloud
    ServerName http://example.com/owncloud
    </VirtualHost>
    I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
    httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd"
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    <IfModule mod_ssl.c>
    Listen 443
    </IfModule>
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    #LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #own additions:
    LoadModule php5_module modules/libphp5.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    Options FollowSymLinks
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Include owncloud
    Include /etc/httpd/conf/extra/owncloud.conf
    Include conf/extra/php5_module.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    thanks!
    Last edited by Carl Karl (2014-05-06 07:40:53)

    OK, solved.
    What I made wrong:
    https://localhost leads to the apache page
    https://localhost/owncloud leads to the owncloud page.
    (Just as an information if there are other apache noobs like me...)

  • ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

    I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
    when browsed through some of the messages they point to setting Oracle Wallet Manager.
    I am trying to connect
    Any idea on how to resolve this issue ?
    your input is appreciated.
    Thanks
    Ravi

    Duplicate post ... please ignore.

  • WCCP on ASA for FTP over HTTP

    Hello,
    We have a WSA appliance that we have in explicit mode and want to configure as transparent. The protocols we cache and analyze with WSA are HTTP, HTTPS, native FTP and FTP over HTTP.
    Is there a service number on WCCP for FTP over HTTP protocol? Or it is included within HTTP?
    Thanks a lot in advance.
    Best regards,
    Igor

    Igor,
    The service number 60 (ftp-native service) only applies  to transparent redirection of FTP native requests and does not apply to  FTP-over-HTTP requests.
    On the other hand; the Content Engine listens for redirected HTTP  requests on the standard HTTP port (default port 80). To enable the  Content Engine to listen for WCCP-intercepted HTTP traffic on ports  other than the default port, configure the custom-web-cache service (98 and 99) or a  user-defined WCCP service (services 90 to 97).
    I hope this helps.
    Regards,
    Juan Lombana
    Please rate helpful posts.

  • Http tunneling (t3 over http) doesn't work!!  (examples too)

    Hi,
    I'm trying to get http tunneling (t3 connection over http protocol) to work. I
    ran some examples included with Weblogic that try establishing that connection
    (PingTest, HelloApplet, SimpleT3Client), as well as my own test program, and they
    all give an error similar to this :
    Couldn't get a reference to server. Exception :
    javax.naming.CommunicationException. Root exception is java.net.ConnectException:
    No server found at HTTP://<IP>:<port>
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:161) at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:200)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java,
    Compiled Code) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:148)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:123)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671) at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242) at javax.naming.InitialContext.init(InitialContext.java:218)
    at javax.naming.InitialContext.<init>(InitialContext.java:194)
    (I replaced the actual Ip and port with <IP> and <port>).
    Now, the server is started and working at that ip and port - it services web http
    requests correctly, etc. Regular T3 connection (not over http) also works with
    it.
    Does anyone know the reason for this problem and/or how to fix it?
    Thanks, Leonid Portnoy

    It appears that one has to use the "Java Plugin" for this mode to work. The
    question is does the version of plugin need to be "in sync" with the JVM
    version on the server. ?.
    /rk
    "Adomas Svirskas" <[email protected]> wrote in message
    news:[email protected]...
    >
    It seems that the solution is to have these two lines in the
    properties file:
    weblogic.httpd.enable=true
    weblogic.httpd.tunnelingenabled=true
    Now it works.
    Thanks,
    Adomas
    "Adomas Svirskas" <[email protected]> wrote:
    Hi Leonid,
    Have you found a solution for this? I have these problems too.
    Thanks,
    Adomas
    "Leonid Portnoy" <[email protected]> wrote:
    Hi,
    I'm trying to get http tunneling (t3 connection over http protocol)to
    work. I
    ran some examples included with Weblogic that try establishing thatconnection
    (PingTest, HelloApplet, SimpleT3Client), as well as my own test program,
    and they
    all give an error similar to this :
    Couldn't get a reference to server. Exception :
    javax.naming.CommunicationException. Root exception is
    java.net.ConnectException:
    No server found at HTTP://<IP>:<port>
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:161) atweblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:200)
    atweblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
    textFactoryDelegate.java,
    Compiled Code) atweblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
    textFactoryDelegate.java:148)
    atweblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
    ory.java:123)
    atjavax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
    at
    javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
    at javax.naming.InitialContext.init(InitialContext.java:218)
    at javax.naming.InitialContext.<init>(InitialContext.java:194)
    (I replaced the actual Ip and port with <IP> and <port>).
    Now, the server is started and working at that ip and port - it services
    web http
    requests correctly, etc. Regular T3 connection (not over http) alsoworks
    with
    it.
    Does anyone know the reason for this problem and/or how to fix it?
    Thanks, Leonid Portnoy

  • Ftp over http authentication

    Hi,
    we have problem opening FTP sites that require authentication.
    When I try to open a ftp site, example ftp://site.com, I get this message in the browser :
    Authentication is required by the FTP server ( ftpserver.com ). A valid user ID and password must be entered when prompted.
    In some cases, the FTP server may limit the number of anonymous connections. If you usually connect to this server as an anonymous user, please try again later.
    But I didn't receive authentication prompt at all
    I think we didn't have issues with the previous versions...

    Are you using IE by chance?  If yes, try accessing the FTP server using a different browser.  IE has a known issue that such that it doesn't prompt end users to enter FTP server credentials when the user goes through any proxy (not just the WSA).  We just decided to add this to the WSA release notes as a "known issue" with the different workarounds listed. You'll see it in the next version of the 7.5 release notes when that comes out someday.  Here's what the bug write-up will say:
    Defect ID 5463
    Users cannot access FTP servers that require server authentication using FTP over HTTP with Internet Explorer. This is a known issue with Internet Explorer when communicating with web proxies. This is due to Internet Explorer never prompting users to enter the server authentication credentials.
    Workaround: To access FTP servers that require server authentication, use one of the following workarounds:
    Use a different browser, such as FireFox or Chrome, to access the FTP server.
    Use an FTP client that uses native FTP to access the FTP server.
    If users must use Internet Explorer, they can prepend the username and password into the URL. For example: ftp://USERNAME:[email protected]@ftp.example.com
    54636

  • Design Choices and is LiveCycle needed? best practices for using RTMP/AMF over HTTP/XML communicatio

    Hi,
    I am new to flex/RIA. I am exploring different design choices especially in client server communication. On client side we will be using Flash based RIA (using Actions scripts).
    There will be some simple forms (like for login, registration, payments etc) and some simple reports including with several graphs and charts. Each chart might have 1000 to 1500 data points etc. There are not video or audio content as such. On server side we have Servlets, java API and some EJBs to provide the business logic and real time prices/content (price update is usually every 10 seconds) /data. Some of the content will be static as well.
    I have following questions in my mind. Is it worth it to use RTMP/AMF channels for the followings?
    1. For simple forms processing (Mapping Actions scripts classes to Java classes). Like to display/retrieve/update data for/from registration forms.
    a. If yes, why? Am I going to be stuck with LCDS? Is it worth it? What could be the cons for heavy usage/traffic scenarios
    b. If not what are the alternates? Should I create the web services? Or only servlets are sufficient (ie. Only HTTP+Java based server side with no LCDS+RTMP+AMF)? All forms need to communicate on secure channel.
    2. For pushing the real time prices/content which we may need to update every 15 seconds on user interface using graphs and charts. Can I do it with some standard J2EE/JMS way with RIA (Flex) on front-end? i.e. Flash application will keep pulling data from some topic. Data can be updated after few secs or few minutes which cant be predicted.
    3. Are there any scalability issues for using RTMP? What happens if concurrent users increase 10 times within a year?
    4. What are the real advantages of using RTMP/AMF instead of simple HTTP/HTTPS probably using xml based objects
    5. Do I need to use LCDS if I am using AMF only on client side? Basically I mean if I am sending an object in form of xml from a servlet. Can some technology in Flash (probably AMF) in client side map it an Action script object?
    6. What are the primary advantages of using LCDS in a system? Is there any alternate solutions? Can I use some standard solutions for data push technologies?
    I would like that my server side implementation can be used by multiple types of clients e.g. RIA browser based, mobile based, third party software (any technology) etc.
    I appreciate if you can kindly refer me to some reading materials which can help me deciding the above. If this is not the right place to post this message then please do refer me to the place where I can post such questions.
    Thanks and Kind regards,
    Jalal

    Hi Jalal,
    Let me see if I can help with some of your questions
    1. Yes, you can use LCDS for simple forms processing. Any time you want to
    move data between the Flex client and the server, LCDS (or its free Open
    source cousin BlazeDS) is going to help. I would expect you would use the
    mx:RemoteObject MXML tag to invoke server side code, passing it the form
    data input by the application user.
    2. If you need to push near real-time data, LCDS gives you the RTMP channel
    which can scale quite nicely. You can then use the mx:Consumer MXML tag to
    subscribe the clients to the messages, which can come from almost anywhere,
    include JMS topics or queues.
    3. RTMP (included in LCDS) is the best option for scaling to tens of
    thousands of users and the LCDS servers can be clustered to proved better
    scaling.
    4. The AMF3 protocol used over the RTMP channels performs much faster than
    simple XML over HTTP. See this blog posting for some tests:
    http://www.jamesward.org/census/.
    5. If you are sending a Flex application XML, then I would recommend using
    the E4X API to work with the XML. This is a pretty nice and powerful way to
    work with XML. If you want Actionscript objects (and probably better
    performance), then using AMF serialization to Actionscript objects is the
    way to go.
    6. Primary advantages? There are many, but mainly you can avoid thinking
    about the plumbing and concentrate on solving your application and business
    logic problems.
    Hope this helps you a little
    Tom Jordahl
    Adobe

  • Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

    Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
    no firewall at all, in win 8.1, turned it off for all networks
    ftp and publish works just fine

    Hi,
    Please take a look at this post : Re: Adobe Muse - Preview Failed
    Regards,
    Aish

Maybe you are looking for

  • Can't select photo stream and Facebook in iphoto

    I don't know why, on the side of iPhoto where we can select the library, we got a section call WEB, where we got our Photo Stream and Facebook account. I don't know why but I can't select those two facebook account and Photo Stream to see and manage

  • BAPI for Purchase info record creation

    Hi Please let me know how to create purchase info record through BAPI, with tax codes along with material price. please guide me. Simha

  • PL/SQL using google translator

    Hi All, we have oracle 10g 10.2.0.4 version. we have a requirement wherein we need to pass a description in english and translate it to some 10 languages. For example we will be passing a word HELLO and i need to get it translated it into french,span

  • How do you add results columns in Segmentation Wizard?

    Every time we do Segmentation Wizard we get the same fields - First, Last, Email, Phone, Address. We would like to add Title and Owner to the list. Thank you.

  • Reset, now all that comes on is the apple Icon

    I bought an ipod touch for my son.  He now has an iphone and gave the the ipod touch.  I went to reset it and after it reset, all that comes on is the apple icon.  You can do a hard restart but after that, it does the same thing.  I doesn't even show