E-studio 282 sets margins on top of the document

Hi there,
For 3 days now I am trying to pring a PDF document no whole a4 page. The problem is that the printer always sets margins on top of the document - moving it down by the value of margin.
That way the document wit a size of A4 starts printing about 0,5cm from tol with couses that it gets on the bottom (outside of a paper sheet).
I tried the same dacument on other printers and it prints out fine.
Another thing i tried was setting (in e-studio) the top and bottom margins while printing.
It just causes 'cutting' top/bottom fragment of document.
Also I tried to mess around with e-studio282 settings and the
"Print Properties>Finishing>Use custom margins..."
Doesnt allow me to set value lower than 0.5cm.
Is there any way to solve my issue?

Hi StishMa
I doubt someone here would be able to provide a solution to your printing issue because in this forum you can find Toshiba enthusiasts who share the experience especially about the notebooks, consumer products like HDDs and multimedia (TV devices).
But I recommend you to check the user manual page 236 Setting the print options area:
http://www.eid.toshiba.com.au/customers/c_es281c/Manuals/pdf/Printing%20Guide.pdf

Similar Messages

  • How set margin/padding top to combobox selected value

    Hi,
    Again I am facing new problem with combobox component, i need to set margin/padding top to combobox selected data using external AS file.
    I have tried the code --> combo_box.setStyle("marginTop", 5); and also used similar styles but its not working.
    Need your suggestions and help.
    Thanks.

    Hi,
    i strongly urge you to read some book about CSS and forget using deprecated HTML tags like FONT.
    Why am i saying that?
    Well, you don't want to change a page template or a report definition every time the user complains about the size of a font or the space between lines, do you?
    CSS is all about presenting the page the way you want, setting margins, spaces, fonts and so on.
    You should focus on the content, the data, leaving the task of formatting to one or more CSS stylesheet linked in the HTML header.
    I recommend reading some articles first, at least to have a general idea of mainstream techniques:
    http://www.alistapart.com/articles/goingtoprint/
    http://webdesign.about.com/cs/css/a/aa042103a.htm
    Or you can google around searching for "css formatting printer friendly" to get a bunch of pages.
    Flavio
    http://oraclequirks.blogspot.com

  • Start typing at the top of the document?

    When I start a text document in a blank canvass, how do I eliminate the wide rectangle at the top so I can start typing at the top of the one inch margin?

    I was able to delete the header text box.

  • Invalid at the top of the document error with fnd output

    I am using oracle standard of writing xml to the output directory using fnd_file.put_line(fnd_file.output,'<xxxxxx>'). On a rather random basis I am getting the following error when trying to open the output file. I specified utf8 in the first line of the xml file i produce. The xml is fine but tacks on an invalid character at the end of the file. If I remove the invalid character it can read the xml. The code is definitely not causing this and I can't seem to reproduce it on demand. When I see this happen on the xml outputs I can run a regular text based concurrent program and it too gets the extra invalid character on the end but doesn't affect that type of program.
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://testapps01.orangecounty.local:8013/OA_CGI/FNDWR...
    </EMP_ROSTER>
    Help! We are on 12.0.6 of the EBiz applications and on XML publisher version 5.6.3(XDO A)

    are you using DTD or anything else ?
    for DTD see last post in Re: how to register the .DTD file in Oracle Apps

  • [CUPS] Documents print with no margin on top of the page

    Hello people!
    I'm having a weird issue when I print documents. Whatever I print, from whatever application I print, it seems that the top margin is reduced. For instance, I have PDF documents with a one-inch top margin. The margin appears to be okay on the on-screen, but does not appear when printed out.
    I've tried playing with the options in the GNOME print dialog, to no avail. I also tried reinstalling my printer's driver, also to no avail. I have read something on the Internets saying it has to do with KDE print dialog, but I don't use KDE. I have kdebase installed, though.
    Anyhow, let me know if you have any thoughts and/or need any info.
    Thanks!

    in case it helps, these are the package versions I have installed:
    jcosta@jcosta-uportable:~$ sudo pacman -Q | grep -i fooma
    foomatic-db 4.0.6_20101215-1
    foomatic-db-engine 4.0.6_20101215-1
    foomatic-db-nonfree 4.0.6_20101215-1
    foomatic-filters 4.0.6_20101215-1
    jcosta@jcosta-uportable:~$
    jcosta@jcosta-uportable:~$ sudo pacman -Q | grep -i cups
    cups 1.4.6-2
    cups-pdf 2.5.1-1
    cups-pk-helper 0.1.2-1
    lib32-libcups 1.5.0-1
    libcups 1.5.0-1

  • Can i consolidate all of my comments to the top of the document for a summary and then have these linked to the position in the doc, using adobe reader on i pad?

    HI, can i consolidate all of my comments in a document to the top for quick review and then click on each ro jump to the posi in the text? I am using adobe reader for ipad. Thanks

    Hi Steve,
    Thanks.  I have it sussed.  I saved from Ipad to Acrobat.com, but the functionality in AC.com is crap so I download to hard drive and open with reader on my hard drive and that way can see the comments.  I'm sure there is a better way to do this so will keep playing around with it.
    Also, do you know how I can include my text comments in IPAD PDF in the search function of PDF reader for IPAD? Say for example I want to search for the word action through a 200 page document.  It won't search the comments as nothing found when I search through a scanned document.
    Thanks again,
    Graeme
    Perth WA

  • Skipping to the top of the document when text selection tool selected

    This may be difficult to explain. But often after I click in the toolbar to switch over to a specific Adobe document (in windows 7) that I previously opened and that is open to a page other than page 1 and with the text select tool has been selected, if I click into the text on the page (say page 4) and then scroll down with the mouse wheel to get to page five, the program will jump back to the beginning of page 1. (display is set at single page - fit page). I like Acrobat very much, but I find this to be extremely irritating and wasteful when trying to select text from and navigate a large document. Can you please tell me why this occurs?

    mari40 wrote:
    I READ the user guide, which told me view>format bar>show format bar. I am talking about the bar that shows how to set the format-- font, spacing, etc. That has gone gray, and eliminated all the settings so I can't alter the settings or print.
    Mari,
    We're here to try to help you; we get some satisfaction out of helping folks to get along with their Apple Pages software. If you just take this one step at a time, I'm sure we can sort it out.
    Thanks for clearing up what your primary issue is. You had Fruhulda all confused with your complaint about printing. I sort of glossed over the printing issue because you seemed to be more focused on the formatting.
    Please re-read my first post - the part about the Format Bar being contextual - and let's go from there.
    Jerry

  • Setting margins for "Create PDF from Clipboard"

    I'm posting this because I could not find another question that dealt with my problem directly, but after A LOT of searching, and a few failed attempts, I did find the solution.
    Problem: When creating a PDF from content copied to the clipboard from a webpage, everything on the page was way off-center, with almost no left margin.
    Once the PDF was created, since there is no easy way to adjust page margins, the only way to center everything would have been one page at a time (for 24 pages), by dragging the page contents manually to the center of the page. I tried using the "Set Page Boxes" function, but I ended up with 24 blank pages. Yes, I could export the PDF as a Word document, and then reprint that Word document as a PDF, but I knew there had to be a simpler way.
    Solution: When you create a PDF from a clipboard containing text (or in the case of the above document, text and images), Acrobat uses the settings for "Create PDF from Web Page."
    Unfortunately, if you look up Convert clipboard content to PDF in Acrobat Help, it doesn't tell you that. AND the settings for "Create PDF from Web Page" are NOT included in the list of settings under Preferences > Convert to PDF. There is an HTML option in that list, but there are no editable settings for that file type (There are actually quite a few such file types listed there, and my question is, if there are no editable settings, why are they even listed under Preferences?). Batch Conversion of Text Files also uses the same settings.
    So, here's how to do it:
    Select File > Create > PDF from Web Page
    Click on Settings
    To adjust the default margins for new PDF files created from a clipboard containing text, select the Page Layout tab, and adjust the margins to your liking. Notice how small the Default right and left margins are... hence my problem.
    Click on OK to save your new settings, and the simply Cancel out of the "Create PDF from Web Page" dialog box. If you read this page, it says you have to actually create at least one PDF file using the "Create PDF from Web Page" dialog in order for your settings to stick, but I never did, and my settings were saved just fine.
    If you're copying basic text (or converting text files), that's all there is to it.
    With web page content, there could still be a problem (as there was with this web page), if the content you've selected is not the full width of the web page. I think this has to do with the fact that web pages often use Content Style Sheets to format their page elements, and those styles are transferred when you copy that content to the clipboard. The PDF page margins are technically correct now, as you can see by the position of the image at the top of the page, but the text portion (at the bottom of the page) of the PDF only fills the same percentage of the text area (between the margins) as it did on the web page.
    The only solution I have found if this happens, is to export the PDF as a Word document, and adjust the margins there. In the document I was working with in these examples, there were boatloads of different invisible subsections to the document, and each subsection had different settings for right and left indent, fonts, font sizes, etc., so there was a lot more to it than a simple 'copy & paste' type of procedure. Once I corrected all the different elements (and this one had a whole lot of weirdness going on), and then printed it as a new PDF, everything looked much better.
    Hopefully this helps someone else find their answer much easier than I found mine
    And of course, comments and suggestions are welcome.

    Thanks for asking. Yes, with either the Crop tool or the Set Page Boxes tool, I could trim the page just fine, removing the excess from the right side, but as soon as I tried to add space to the left side, it just blanked out the whole page. It seemed like it should have worked, and maybe on a simple text file it would have. But that particular array of content proved to be most troublesome.
    I also could have just cropped the page down to 6.5 x 11, and then centered it when I printed it.
    My primary goal in searching for the answer, and my main reason for posting this, was for setting the margins for future documents (and to help others find those settings,too). Since I still had the web address, I could easily recreate the PDF once I figured out how to set the margins. Of course I didn't realize that there would still be problems once I got the settings right. Like I said, that particular web page seemed to have several unique difficulties.

  • I have a water damage iPhone 5s would like to change to new set with top up the money. But the staff told me it couldn't be done due to some of my minor parts are missing according to company policy. I need advise as I want to change it.

    Hi all,
    I have a water damage iPhone 5s was bring to service center to have new set change with top up the money. Well, the staff were told me that the phone can't be change due to some of minor parts are missing in the phone. He said this is due to company policy. I would like to check is that nothing can do with this missing minor parts? I really doubt the policy of the Apple as I was told as long as you bring to the service center, they will assists. As Apple is a well known brand top of the world, but the servicing is really make me so disappointed! I really doubt should I still continue to support the Apple product with helpless service!
    Would like to take this opportunity to seek the professional advise in order to get my phone change back.
    Appreciate very much!
    Thanks.

    Well, your service is handled by an Authorized Apple Service Center. If they refuse to handle the claim, that is well within their rights. Apple as well could void a claim under the same circumstances. I'm not saying that you did or did not modify the device, but you could try and talk to a supervisor there and make another request. You can also try and contact Apple by obtaining a number with this support document and describe your problem. http://support.apple.com/kb/HE57

  • Unable to set margins or padding

    Margins and Padding do not work for pictures, or Shapes, or anything that I can tell.
    Can you help me understand how to configure Padding and margins?
    Or do i need to fast create wiht Muse and export to Dreamweaver or Expression?

    Zak,
    Thanks for your reply.
    I am trying to create an landing (Home) page that has a single photo below the heading and above the footer and stays vertically centered as the browser size is changed.
    My basic problem is really that I can find a place to set margins and padding, but the objects in Muse do not act like divs, and the margin and padding settings are unavailable.
    S

  • How to get the navigation bar on top of the border?

    Hi
    I have captured some captivate files (in Captivate 5.5) which I need to make look similar to the existing ones. I don't have source and am not aware which version of Captivate was it built on.
    Now, the existing ones have the navigation panel on top of the border like this:
    However, in my version I am getting the border on above the border like this:
    Is it possible to get the bar on top? If yes, how?
    Thanks
    Sreekanth

    Hi Sreekanth,
    Please try following step :
    - open project
    - click on project menu
    - Select Skin editor
    - set position to 'TOP'
    Check the image for more information

  • SharePoint 2013 - Document Set Capture Version History. Does each version captured for each document set keep a copy of all the document stored in the document set?

    Hi All,
    We have currently encountered an issue where even though version control is turned on in a document library, changes made to the metadata of a document set is not tracked in a version history. 
    We have found that in order to this a user will need to manually click on the capture version history button. 
    With this in mind, we are concerned about the impact of this on our storage. The question we have been trying to answer is whether each document set version:
    stores the change in metadata of the document set and a copy of all the documents stored in the document set
    stores the change in metadata of the document set and a reference to the documents stored in the document set (making use of SharePoint 2013's shredded storage)
    The reason we ask this is that if a document set version stores a copy of all the document stored in a document set, a change in one of the fields in the document set could result in the storage used to grow exponentially. e.g. if the document set contains
    documents totaling 30MB, and if we have 10 versions of the document set, we could take up 300 MB in the content database for just one document set.
    We have tried to some searching around Google but wasn't able to find any answers around this question. Would appreciate some assistance from anyone who has knowledge around how document set version history works. 
    Thanks in advance.
    John

    i had a long thing written out, but submit failed.  suffice to say it does "2".  it only stores the changes with pointers to the documents. 
    Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://tealsk12.org Volunteer Teacher | http://christophermichaelwebb.com

  • Wouldn't be a handy update if at the top of the open Pages document, next to the Apple and Pages menu option, it showed the open document name or file name?

    Just as the title says, really.

    I'm not sure where the Apple and Pages menu option is.  When I'm editing a document in iCloud Beta the name of the document is in the window caption (below).
    But your suggestions should be sent directly to Apple and you can do that via the Send Us Feedback button at the top of the document list page:

  • Header Margins Different than Body of Document

    I'm trying to create a document (a template, actually) where the desire is to have the header and footer margins be smaller on both the right and left sides (i.e., they are wider, spanning more of the page). It seems like the default behavior or Pages is to align the header and footer margins to the document body margins. I can't seem to find a solution and any help is appreciated. Oh Yes, I want the different margins to persist throughout the document.

    Rerunner,
    Sure, you can have different margins, and it's easy to do. Just put your cursor in the header, then adjust the margin sliders in the ruler. Click in the text area and you'll see the that those margins are unaffected by the change. Now do the same thing with the footer. Insert a page break and you'll see that the header margins on page 2 are the same as page 1.
    Is this what you're looking for?
    -Dennis

  • SSRS: Setting Header from Top/Footer from Bottom

    Hello there guys
    We're using RDLC-Files to create some word reports.
    In our previous version, where we used RDL-Files on SQL 2008 R2, the Margin-Properties (Header from Top / Footer from Bottom) didn't get set at all an was always 0.
    This behaviour was reported, but marked by Microsoft as 'By design'. Since I can't post a link, just google for
    "Word export sets margin-top, margin-bottom to 0mm".
    Interesting enought, on our new Version with RDLC, this properties are always set to 1.27cm, but ignore the Margin-Properties of the Report-Page at all.
    Since we'd like to port our reports from the old RDLs to the new RDLCs, it would be the easiest way, if we could kindahow set these two properties.
    But so far I didn't find a possiblity. Is there one, to tell the Word-Renderer what we'd like to set there?
    Thanks in advance
    Matthias Müller

    Hi Matthias,
    Thank you for your question. 
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. 
    Thank you for your understanding and support.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for