E Table of aggregate has too many partitions

Hi,
While checking performance info of the query I'm getting red light on one of the lines saying aggregate 100067 has too many partitions in E table.
Could you guys pls let me know what is this all about and how to reslove the same?
Thanks
R

Does your cube have compress after rollup on the aggregates...?
The aggregate is partitioned in the same way the E fact table is partitioned. You should choose the compress upon rollup option in the rollup tab of the infocube... Set the same and then if possible deactivate and do another rollup to the aggregate...

Similar Messages

Aggregates having too many partitions

I have come across a situation where the aggregrates has too many partitions and I cant correct this with RSRV checks.
This is the error message in RSRV.
"E table of aggregate 100157 has too many partitions"
There are many errors of this kind. How can I resolve this issue.
Appreciate your help..

Some Insights-
Take some time to go through it..
Numerous questions on this note made it necessary to talk a bit about E tables here as well since E facttables may also be partitioned. But they are only allowed to be partitioned by the time characteristics 0FISCPER and 0CALMONTH and only once they are activated. Any attempts to switch on partitioning after the activation has taken place and the cube has data (regardless whether in F or E table) is not supported at all. You have to do that by creating a second cube, partition that one and then load it from the first via an export datasource.
or
RE-PARTITIONING is the soln
http://help.sap.com/saphelp_nw04s/helpdata/en/b9/60c041a2236a24e10000000a1550b0/frameset.htm
The final tool for these E table partition related question will be delivered with the next release of BW as part of Netweaver 2004s. There will be a repartitioning tool allowing you to dynamically (well, you still shouldn't do this every day;-) change the partitioning range of a cube. And it will allow you to switch cubes to be partitioned which were unpartitiond before without going through the reload scenario that is necessary in BW 3.X (where X = 0, 1 or 5).
Since that tool is based on major rewrites of existing as well as creation of new functionality, it can not be downported to BW 3.X
Note 590370 - Too many uncompressed request
Hope it Helps
Chetan
@CP...

V570 - Has too many partitions - Can I nuke one? I need a separate Data Partition!

Hi,
I convinced a Buddy to buy a V570 two days ago. (I've used a Lenovo Laptop for work for a year, and it's been rock solid.) The box was delivered to his house a few hours ago. He lit it up and put his name on it, and then brought it to me, as I help his family out with their computers. (Our Wives are best friends.) I'm a bit geeky and usually know my way around these boxes. But I'm a little stumped on this one.
Normally on laptops they come with tons of bloatware, and it's usually faster to go up to the OEM's site, download all the latest drivers and utilities, then back up the original image before blowing it away, and installing a fresh Windows OS. One of the other main issues is most lappys have one big partition for the OS and Data. So if you get a Trojan or virus => it can nuke all of it. So I always divide the drive, and have a Data partition, so you don't lose everything if (when) something nasty occurs.
But in this case the Box really doesn't have too much bloatware, so I thought make the Factory backup disks, then uninstall the few unwanted programs, partition the C Drive, and create a Data drive in that space. I didn't even look at the hidden partitions so when I went to Create the Data partition I was warned Windows 7 64 Pro doesn't support more than 4 partitions on the operating system drive! If I go into Disk Management I see the typical small Win7 recovery 200 MB partition, a 654 GB C partition, a empty (?) 29 Gig Lenovo partition, and a 14.75 OEM partition. I'm used to the first 2 partitions but what's the rational for the last two from lenovo? One is the "factory" image, and I assume it's the OEM partition, so what's the Lenovo partition for? Can I shrink C, and enlarge the Lenovo partition, so it can become the Data Drive => without affecting the lenovo drives function?
I thought I may have to go with the new Windows install but I can find all the drivers /utilities software at the Lenovo Sites. So I'm a bit stumped and would appreciate your help.
Thanks for the assist.
Regards,
-Jim-

Jim,
     In one word, no.
     I would strongly advise you to just leave it alone, unless you want to spend hours on the phone to your friend, trying to fix all the problems your friend will encounter, with his "new" modded system.
     Please, I'm not trying to be nasty, or unkind. Those 4 partitions are the key to Lenovo's One Key Recovery. Lenovo has spent a lot of time, and engineering to make their systems as user friendly, and trouble free as possible. They built in the Enhanced Experience 2.0, and customized the Windows 7 software for fast booting. Just because you "can" repartition the drive, doesn't mean you "should".
     These forums are filled with users who messed around with their drive structure, used a modded BIOS, or just plain screwed up their programs and hardware, just because they "could". Then they want some urgent help for their machines that went wacky. The moderators on these sites have a hard enough job, keeping track of the various systems "as shipped", to do any troubleshooting on those systems that the user has repositioned the drive, or deleted the programs that Lenovo has included for recovery.
     As you've said, there's not a lot of bloatware on Lenovo's machines. You shouldn't have to reload a "fresh Window OS". If you do, some of the Lenovo's Enhanced Experience 2.0 for Win 7, and some other functions will be toast. That's why you don't see all of the Windows drivers on their site. Lenovo only includes the drivers that have been modified for your V570. Stick with them.
     So, in the end, yeah you can mess with the partitions, but you shouldn't. See this thread to know what you are getting in to, and be ready for your friend's late night phone calls.
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/new-disk-partioning-and-one-key-recover-featur...
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Access 2010 table has too many fields for web database - how to split into two web-compatible tables?

Hello,
I'm in the process of converting an Access 2010 database into a web database and I'm having some trouble. I have a table which has 236 fields, which is more than the 220 field limit for web-compatible tables. I have tried to split this table into two tables
with a one-to-one relationship, but web tables can only use lookups as relationships. I've tried to connect the tables with a lookup and then synthesize a one-to-one relationship by using data macros but I'm not having much luck.
I realize that 236 fields is a lot, but it must be set up this way because each field represents a tasks and is a yes/no box to verify that the task has been completed - and the records are different employees for whom which the tasks need to be completed.
Could someone please help me figure out a way to make this table web compatible?
Thank you,
Ryan

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/access-2010-table-has-too-many-fields-for-web/06ee81ea-24ab-48b8-9b8f-0ed08a868bac
Regards,
George Zhao
TechNet Community Support

Too many partitions in my W530?

This may look like a silly question and I fully admit that it might be it... But I have been unable to find a way to get rid of some apparently unuseful partitions in my SSD. I am attaching two images (see below) for clarity.
In image 1, I can see only two partitions, C: and Q: and there are also listed three other "Devices with Removable Storage": the DVD RW drive (D: ), the Removable Disk (F: ) and the Removable Disk (G: ). I tried to get rid of these last two (F: and G: ) but could not figure out how to achieve it. Not that their presence is a problem, just for cleaning purposes, as I do not see any need for them to be listed there. I don't even fathom what they may actually represent.
In image 2, taken from the Acronis True Image backup app, besides the same C: and Q: partitions, I also see a System_drv and an unamed partition that are not listed in the Windows-7 figure. The Unamed Partition, by the way, is always empty but I was discouraged in the past to just get rid of it. I wonder if I should, having received conflicting advice on whether or not to do it.
My question is: How can I eliminate the Removable Disks F: and G: as shown in the Windows figure and would it be a good idea to get rid of the Unamed partition as shown in the Acronis figure.
All help will be very much appreciated.
Thanks.
Link to image 1
Link to image 2
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

If you were to install Win7 from scratch on a brand new empty drive (spinner or SSD, doesn't matter) and not change anything from the standard default installation options, you'd get TWO partitions:
(1) un-lettered "system reserved" 100MB, where Boot Manager (and boot menu, presented if you were to install a second or subsequent bootable OS after installing Win7 as the first bootable OS) is placed. This is also marked as the ACTIVE partition, so that the BIOS goes here to start the actual boot process.
(2) C-partition for the rest of the drive. This is where Windows itself gets installed, as a "system" drive.
In the case of Lenovo-provided machines, they have installed additional recovery tools, which are placed into that small un-lettered partition normally referred to as "system reserved" and only 100MB. Lenovo has enlarged the partition from the standard 100MB to about 1.5GB, but it's functionally identical in purpose. Also, it's been labeled "SYSTEM_DRV", rather than "System Reserved", but this is of no relevance.
And Lenovo's also added that additional Q-partition, which is where the "data" for system recovery is placed, in the event you needed to or wanted to restore your machine to initial factory state, exactly as it looked when it first came out of the box.
So... what's critical here is that standard Windows7 requires the TWO partitions: (1) ACTIVE partition, where Boot Manager and boot menu lives and where the BIOS goes to start the boot process on what is configured as the first hard drive in the boot sequence, and (2) C-partition because that is specified as the one-and-only bootable OS partition according to the default one-OS boot menu built by the Win7 installer and subsequently examined by Boot Manager at boot time. Since by default there is only one bootable OS you will not be presented with the boot menu, but instead Boot Manager will simply use that one-and-only OS and start it. If you had two or more bootable OS's, you'd get a boot list presented onscreen by Boot Manager, and you'd need to select which one to boot from within say 10 seconds else the default OS would automatically be booted.
Any "system image" backup requires BOTH of the above partitions to be checked, since [at least theoretically] BOTH of them need to be backed up and/or restored in tandem should you need to recover from a disaster. By backing and restoring BOTH, you guarantee a 100% working operating environment should you need to recover from a disaster.
Now the Q partition can be deleted (and its space re-allocated to either expand C, or perhaps in conjunction with shrinking the generally much too large C can be used to allocate one or more additional "data" partitions D, E, etc.) if you will NEVER need to or want to recover back to Lenovo's "factory-provided" out-of-the-box system setup. This could be the case if you use an alternative method for disaster recovery, such as using Macrium Reflect to take regular periodic (say once a week) "system image" backups, say to an external USB 3.0 drive.
So you could use Macrium Reflect to take an initial "system image" backup, which would effectively be your equivalent of the Lenovo-provided Q partition content, although you wouldn't need Q if you had to restore the Macrium "system image" backup. And then you'd just establish a weekly regime of further "system image" backups using Macrium, as your ongoing regular protection from a loss of Windows integrity which required some kind of restore to a prior working system. In this case it would be no older than last week's backup.
If you needed more current protection, just take more frequent "system image" backups (if you only have a C partition), or add a second backup tool like NovaBACKUP to take monthly/daily "data" backups (also to the external USB 3.0 drive).
==> You don't have "too many partitions". But the above description explains why you have what you have, and confirms that you can blow away Q if you have an alternative and superior backup/recovery method (such as Macrium Reflect) in case of a disaster.

How do I add a VM that has too many dependencies to be shown as "Map View " ?

When in Table View there is no option to add/remove a VM to an App or to create/delete an App.
f.eks. I added three VM's and created an App called "Convergion"
Two of those VM's can only be shown in "Table View" because of too many outgoing dependencies.
I accidentally removed the Third VM (the one that could be shown in "Map View") and now I have no way of:
1) Adding the third VM back to the App
2) Removing the App or
3) Remove the two remaining VM's from the App
So, to create the App again I have to call it "Convergion~1" or something similarilly stupid.
But two of the VM's now still belong to "Convergion" (the now "Zombied" App) as well as "Convergion~1"
Any ideas ?
P.S. I should be able to create an App and manually add the VM's needed from the vCenter Inventory (Search box or similar) without having to have a "Visual" contact in the Map View.
Some maps get huge and it's not very practical.
Consider this a feature request.

Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman

Trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed

trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]

The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

%COMMON_FIB-6-FIB_RECURSION: has too many (8) levels of recursion during process switch

Hi,
I often get this message in my logs;
%COMMON_FIB-6-FIB_RECURSION: has too many (8) levels of recursion during process switch
Does anyone have any idea what this means? This same router has, on average, one disconnect from our GRE tunnel each day and I can't connect to it externally until the cable modem is rebooted. The log above is the only thing I've got to go on really. Everything else looks normal.
Thanks!

i am using weblogic 10.3 but still getting <Oct 8, 2009 3:26:35 AM EDT> <Error> <Application Poller> <BEA-149411> <I/O exception encountered java.io.FileNotFoundException: /my123Domain456/123456ServerName/servers/123456ServerName/cache/.app_poller_lastrun (Too many open files).
java.io.FileNotFoundException:
My clients are getting to others as I use Oracle 10G Rac oracle 10 Weblogic and getting 100s of problems, save me geeks.

ITunes 9/iPod OS 3.1.1 combo has too many issues/bugs

After upgrading to iTunes 9 and Touch to 3.1.1 I am having too many issues:
iPOD TOUCH:
1. Everytime I launch music, it displays "upgrading library" message and takes eons (5 minutes) to show the library
2. Playlists don't work: most playlists show tracks in random order not matching iTunes, and also with total number of tracks different from iTunes. This had rendered most playlist as useless. Wondering when Apple will fix it.
iTUNES:
1. Much hyped arranging of applications through iTunes doesn't work. I took whole lot of time arranging the applications in iTunes virtual desktop, but after syncing I found entire arrangement lost both in iTunes and in Touch. I did it many times, but with the same unwanted result.
Any help?

That's what i used to tell people. but I up(down)graded to version 9 itunes, and version 3.1.1 for the ipod touch and now i can't restore the ipod because itunes can't connect to the software update server. why do i want to restore the ipod touch? mostly because every extra app added refuses to work! nothing launches. even apple's own remote app can't push through this mess the updates have created.
I'm on a mac. 10.5.8 everything used to work just fine before these updates. What hurts even more is that i actually had to pay for the touch 3.1.1 update as well, and now i've got a non-functioning ipod. cheers apple. How about they release an update to reverse the wonderful job this latest version has performed... Or at least a single company communication as to what is wrong, and how to fix it, rather than a dozen different suggestions in forums and non-existent support documentation!
rant now over. please just fix it apple.

Calling Overloaded Procedures from Table Adapter - PLS-00307: too many..

I have called Overloaded Oracle Procs in .NET code in the past. I now want to add a procedure call to a table adapter. The proc is an overloaded proc and when I add it I get the following:
PLS-00307: too many declarations of 'prc_[my proc name]' match this call.
I looked in the designer class and all the parameters are there, just as I do in my own code, but it still gets the message above even with all the parameter names in place.
Is there a way to call Overloaded Procs from a table adapter? ?

Any Oracle folks care to provide some input on why Table Adapters cannot call Overloaded Stored Procs?
Edited by: SURFThru on Jul 8, 2011 11:37 AM

My ipod 5th gen has too many GB on the other, and now the rest of my apps and music won't download. What do I do?

so I went to sync my ipod, and the computer says i have too many GB of space being used on my ipod for "other". I checked yesterday and there wasn't nearly that much space being used. What happened, and can i fix it? Thanks!

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

How do i run a class which has too many dependencies/class/jar file

i am very new in java environment, i have developed a class which has to many jar file, it works fun when i run it from ide but problem arise which i wanna run it from command promt like
java classname
here is my code
import java.sql.Connection;
import java.sql.SQLException;
import java.util.HashMap;
import java.util.Map;
import net.sf.jasperreports.engine.JRException;
import net.sf.jasperreports.engine.xml.JRXmlLoader;
import net.sf.jasperreports.engine.JasperCompileManager;
import net.sf.jasperreports.engine.JasperFillManager;
import net.sf.jasperreports.engine.JasperExportManager;
import net.sf.jasperreports.engine.JasperPrint;
import net.sf.jasperreports.engine.JasperReport;
import net.sf.jasperreports.engine.design.JasperDesign;
import net.sf.jasperreports.view.JasperViewer;
public class ReportViewer {
     public static void main(String[] args) {
          try {
               JasperDesign jasperDesign = JRXmlLoader.load("EmpDeptReport.xml");
               JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
               Map parameters = new HashMap();
               parameters.put("Title", "JasperReport");
               Connection conn = Database.getConnection();
               JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,
                         parameters, conn);
               JasperExportManager.exportReportToPdfFile(jasperPrint, "Sebl_Statement.pdf");
               JasperViewer.viewReport(jasperPrint);
          } catch (JRException e) {
               e.printStackTrace();
          } catch (SQLException e) {
               e.printStackTrace();
so expert people , please help a novice people.
[code

If you place all of your extra .jar files into a "lib" folder in same folder as your jar file then you can call the java class easily using a script similar to.....
#--------- runJava.bat file to call java program --------------------
cp=.
for f in lib/*.jar; do cp=$cp:$f; done
java -cp $cp:PROGRAM_JAR_FILE.jar com.myclass.mainclass
#--------- end script -------------
This loops over the *.jar files in the lib folder and adds them to the classpath. Please note that ":" is used as a cp seperator since this script was run on linux.
hth,
Robin

Why Has Too Many Tabs Been Suddenly Removed?

Firefox and add ons have been working fine.
Following a crash I am now informed that Too Many Tabs 1.3.6 is not compatible with Firefox 3.6.18 .
I don't want to upgrade because, usually, numerous add ons fail to work with upgrades and an upgrade tends to be a retrograde step as regards add ons.
Firefox usually issues new versions prematurely, and tends to put the cart before the horse as regards add ons.
They can't patiently wait until add ons are ready and compatible.

I can't see why there would be a problem. Have you tried uninstalling and re-installing Too Many Tabs? If you have continuing problems you should get in touch with the developer.
Waiting for add-on developers would take forever and a day. The worst culprits are the toolbars of big commercial operations who have many months notice of version changes. And often the changes required are truly minor. I manage very well with no third party toolbars.
My extensions have not needed updating for weeks. If you have an extension that is lagging there are often better alternatives, certainly better maintained. Too Many Toolbars doesn't seem to be a culprit.
Sorry for the lecture. I have no connections with Firefox except as a happy user.

Table has too many columns for one pg in InDesign document. How do I force a break?

I have imported an Excel table into my InDesign document. The table is 598 columns wide. Obviously this isn't fitting on one page. I want it to just keep flowing from page to page, keeping one same column at the beginning of each page (like "freeze panes" does in Excel) but it's not doing that. Is this possible in my InDesign document or will I have to manually copy and paste 10 columns at a time, which is about how many are fitting on one page? Any searches I do on this subject just talk about flowing rows but nothing about columns.

As far as I know there's probably no way ID is going to do what you want.
You can place a table across a multiple page spread, but the odds of being able to do that and still keep the file printable are marginal, at best. You can't for example, leave blank space at the gutters unless you are able to add a blank column that spans the gutter, and the limt for multipage spreads is 10 pages wide, whcih doesn't sound like it's probably enough to hold almost 600 columns.
Perhaps placing the table using named ranges of appropriate widths would work...

Oracle Instanc has too many tables, way to subset?

Hello, When i try to bring up an Oracle instance and do a query, thereare so many tables that it takes 10 minutes for H. to bring up thelist of tables. Is there a way to subset by Owner like TOAD does, so that i'mnot trying to bit off the whole thing at once? Thanks very much! BobK

Thanks for the idea. I use the filters all of the time to find tables of interest. Like if I'm looking for tables with product info, I'll put "%prod%", or something like that. But as you suggest, I guess there's no reason why I couldn't key in every one of my 100+ tables of interest so I don't see 300+ tables that are empty and unused.
One thing that worries me is that I would make this huge investment in time (keying into the filter) and I'd hit "clear filter" by accident one day.
I think I'll write a macro in AutoIt and enter the interesting tables in the filter using the (reusable) macro. Thanks again.
-- Dale --

E Table of aggregate has too many partitions

Similar Messages

Maybe you are looking for