E-TDS :Std functionality J1INQEFILE is not effective

Hi Gurus,
I have run report in T.code: J1INQEFILE and it is tested by user.But user is not accepting it totally.Because their requirement is more.Is there any latest changes/note in SAP for ETDS return.Pl advise whether every company is accepting J1INQEFILE reports.
Pl advise.
Regards,
Samar

Hi Gurus,
Thanks for the reply.
Apart from datas available in J1INQEFILE report,my user requires following data:
Section code
Chq No.
BSR code
Pl advise.
Regards,
Samar

Similar Messages

"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Std. function module u2018'FITP_CREATE_TRIP_FROM_REQUEST' is not creating trip

Hi
We have user the Std. function module u2018'FITP_CREATE_TRIP_FROM_REQUEST' in Webdynpro abap and employees were able to create Trips. but now after a system upgrade to EPh4 suddenly the function module has stopped working.
now when a person trys to create a trip the following error is displayed."Cannot create the request"
please suggest what can i do to address this issue.

any hints?
anyone??
Edited by: Jack on Nov 25, 2009 5:28 PM
SAP just now replied tht this FM is "Not Released By SAP" hence this is a consulting issue.
Now we will have to resolve this on our own?? can anyone check the same?
Edited by: Jack on Nov 25, 2009 5:29 PM

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Purchase order enhancement is not effective

Hi Expert,
   I have a requirement about the purchase order. The requirement is that we must maintain the field collective no under the document header level. If there is no value exist , I can't print out the purchase order for the signature.
I have looked for the enhancement MM06E005, but it's not effective. I have looked for the enhancement MM06E005, but it's not effective. Which method is fit for my requirement, badi or enhancement? If using the badi, please tell me the badi name and its relevant method.
   Thanks.
George shi

Hello
There are badis related to PO
ME_ACTV_CANCEL_PO    BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET         Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHDOC_ACTIVE      Activation of Further Change Document Updates
ME_CHECK_ALL_ITEMS   Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES     Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R      BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V      BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO      Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_DEFINE_CALCTYPE   Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST       Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO           Hold Enjoy Purchase Orders: Activation/Deactivation
ME_OUTBOUND_SAVED    Outbound message saved
ME_PO_SC_SRV         BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP      Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST   Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED   Purchasing Document Posted
ME_REQ_APPROVAL      Control of Buyer Approval After Changes to PReq Item
ME_REQ_HEADER_TEXT   Copy Header Text: Enjoy Purchase Requisition
ME_REQ_NEW_VERSION   Trigger new purchase requisition version
ME_REQ_OI_EXT        Commitment Update in the Case of External Requisitions
ME_REQ_POSTED        Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP       Triggers New ATP for Changes in EKKO, EKPO, EKPV
MEREP_RSLTHNDL2      SAP Mobile: BAdI definition for Result Handling
MEREP_RUNTM_LD2      SAP Mobile: BAdI definition for Runtime Loader
MESSAGES_RFW         Badi for error handling RFW
METH_FOBU_CONNECTOR Appl. Specific Functions for Formula Builder Method Impl
METH_FOEV_CONNECTOR Appl. Spec. Functions for FB Method Implementations
Thanks
Anirudh Saini

CS6 Functional Content will not install

Help:
Just discovered I was supposed to have "functional content" in Encore, Premiere, and After Effects CS6. I installed this from the disks originally. Did not realize the install did not work. Ended up downloading functional content from Adobe and installed Premiere and Encore functional content. Still nothing coming up in Encore. Don't know what it was supposed to install in Premiere. And not sure what I was supposed to get in After Effects that I don't have. The only possibility I can think of: Production Premium is installed on my C drive (WIN 7) but I used a different hard disk drive for all my scratch disks. Don't see why that should be an issue, but its the only thing I can come up with.
I haven't had CS6 all that long! And I am just now getting into Encore and AE --nothing in the Encore library. I do have a library file in the program file folder and it appears to be populated. Encore is just not talking to that file for some unknown reason. Don't know if Premiere is or not or how to tell in Premiere if I have the "functional content" or not because I don't know that that content is supposed to be.
Thanks for any help,
Dave

It ludicrous to have to go through this...and there is so much
misinformation floating around this "help" area. I finally just stumbled
across this page.
On Tue, Nov 18, 2014 at 7:15 PM, AliciaRetired <[email protected]>

Index not effecting -- Urgent

Dear All,
I am doing calculation for incentives. The package is generated by oracle itself.
But it is taking very very long time in one instance and in another instance it takes very short time.
When I looked at plan I found that the sql queries are not using the indexes at all. Even these tables are seeded and indexes are also seeded.
Why the indexes are not effecting? I have rebuilt the indexes also for this schema also still not working.
Thanks,
Krunal

user10717959 wrote:
Dear All,
I am doing calculation for incentives. The package is generated by oracle itself.
But it is taking very very long time in one instance and in another instance it takes very short time.
When I looked at plan I found that the sql queries are not using the indexes at all. Even these tables are seeded and indexes are also seeded.
Why the indexes are not effecting? I have rebuilt the indexes also for this schema also still not working.And who did tell you that rebuilding of index would make it usable for the query?
Your column is containing some null values or are you using any function or transformation on the column? If yes, this can be one of the possible reasons that the index is not being used even when being forced. What's "seeding the table and index" BTW?
What's your db version (4 digits) and o/s ? Post here the query plan ( use the code tag for posting it. See the FAQ on the top right corner of this page for knowing more about it) .
HTH
Aman....

Function single execution (not in parallel)

Hi All,
in a dataflow, I´ve 2 source tables , each of them with a query and with the respectively target table.
but in the both queries, there is a call to the same function (that generates an ID from a table) and I got a n error (same ID) because two queries is executed at the same time, generating corrupted data.
So, I deactivated "Enable parallel execution" from my custom function but with no success.
any idea? I can use another DF but Im trying to reduce the # of objects.
Thanks in advance!

I think "Enable Parallel Execution" option is per transform, for example of you set DOP to > 1 then for same Query transform multiple instances will be created, if a mapping in that query uses this function and its not enabled for parallel execution then it will not be part of the parallel execution plan
In your case, each source->Query->target are parallel streams, the option will be effective within a stream not across, how is the sequence generated from database ? is there no locking mechnism for that ?
even if you split the ops in 2 DF, if they are runnig in parallel then you may run into same issue.

Problem in copying std function module

Hi friends,
I have this std function module .
MS_PURCHASE_ORDER_REPORTING
i copied it to ZMS_PURCHASE_ORDER_REPORTING,till here everthing fine. In above std fm in tables tab we have
po_xdata like srv_mdrv.
i want to change it to po_xdata like zsrv_mdrv.
I mean i created one view zsrv_mdrv, so i want to replace above std one with my view.
when i try to copy im gettign error as:
tables paramete are absolete.
Please help me out ,its very urgent.
rgds,
vamsi

Ramya,
I created my own view, in that i have some fields which are not in srv_modrv view.
this zsrv_modrv has to be add in place of srv_modrv in function module which i have changed to zfunction module.
something im gettign tables parameters are obsolete something.
even i tried with by changing parameter name and seen, then also its not taking..
please help me . its very urgent.

Function Code can not be selected

Dear expert,
Please help me, there is a uploader For MIGO, USer is uploading data using this uploader, Sometimes when user try to upload data, he gets a message on status BAR:
Function cannot be selected, When i Double Click on that Message i Get Following Information:
Message NO: 00255
Diagnosis
You entered an Inactive function code
You can trigger this by:
inputting directly in the OK code field
inputting the fastpath of an inactive menu function
choosing an inactice function key, or even by
choosing enter, if enter has an inactive function
In batch input a function code is included in field BDC_OKCODE of the session, as long as this function Code is not assigned to Enter
As well as activating function codes stastically in the menu painter(Transaction SE41), they can also be deactivated dynamically using the excluding addition with PF-STATUS.
Now one more thing i want to tell you is when user just open MIGO directly and try to enter some data and get back before saving and then Execute uploader then user can upload data without any error,
Kindly tell me what shoul i do to remove this error permanently
Thanks in advance
Regards
Shelly Malik

There is an error in this uploader, it should not call this command which is not available on that screen. What is this uploader? If it's a custom abap program, you must debug it.

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

While "Invoice Cancelling- Accounting entry not effected in Trial balance"

Dear All,
Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
I can able to see the Reversal Entry in Payables > Reports > View Accounting A
Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
@Have to Resolve this as soon as possilble, plz any one can lets guide me
Reagrds,
senthil

Plz Update this asap.....

We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now

to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So Much

Lojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?

Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update

Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          25.05.2011 14:43:26
Short text
     Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
     The function module "GM_DOCUMENT_REVERSE" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLRWCL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught in
    procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "SAPLRWCL" contains the CALL FUNCTION statement.
    The name of the function module to be called is "GM_DOCUMENT_REVERSE".
    No function module exists with the name "GM_DOCUMENT_REVERSE".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLRWCL" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
    "SAPLRWCL" or "LRWCLF10"
    "CALL_DISPATCHER_STORNO_R"
    Function modules with names similar to "GM_DOCUMENT_REVERSE":
    GM_DOCUMENT_CLOSE
    GM_DOCUMENT_RECORD
    GM_DOCUMENT_DELETE
    GM_DOCUMENT_POST
    GM_DOCUMENT_CHECK
    G_DOCUMENT_RECORD
    GJ_DOCUMENT_RECORD
    GM_DOCUMENT_PROJECT
    GET_DOCUMENTS
    GM_DOCUMENT_DISPLAY
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PM

Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma.

Function Module (ENQUEUE_ES_PROG) not working in Background

I scheduled a job which runs every 15 mins in the the background to fetch data from an external system,depending on the data volume ,the program can sometimes run for over 15 minutes.To avoid data conflict I used a function module ENQUEUE_ES_PROG on the program to first check if the job started is still running before another job gets kicked.The problem I have is the fact that this function module does not seem to work in the background but in the looks perfect in foreground. Does anyone have a clue on how to use this FM for background job?

Hello Mochabo,
Consider the following scenario:
Your job is running for more than 15 minutes. Since it is running in the background, it will be executed by a work-process of type BACKGROUND. If there's only one BACKGROUND work process configured for your application server, then the second job will have to be waiting till the first one finishes and releases the background work process.
But when you are executing this in the foreground, the DIALOG work-process does the processing. So you are not finding any problem.
So, to my knowledge, there will be a problem when there's only one BACKGROUND work process. Please go to transaction SM50 and see how many of them are configured for the current application server.
Also, in case there's only one BACKGROUND work-process, you will not have toworry that the second job will start before the first has finished. It simply can't. It has got to wait.
Hope this explanation helps.
Regards,
Anand Mandalika.

E-TDS :Std functionality J1INQEFILE is not effective

Similar Messages

Maybe you are looking for