E1 to E1 DTI voice 30 channel transparent connection through WAN

Hello ,
I want to connect an E1 to E1 DTI voice 30 channel transparent connection through WAN
PSTN---E1 (router) Wan --- Wan (router) E1---PBX
Anyone can help with the above configuration?
I want the E1 connection to be transparent from the PSTN to the PBX for full voice usage.

That's about it, but you will also need to add the additional trunk to the existing trunk.dat file on the PGW.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/pgw/9/provisioning/notes/NASPKpgw.html#wp1035285

Similar Messages

Transparent connections through HTTP proxies

Hi All,
I am trying to connect to internet through java application. In my application I had an object for example
SomeObject obj = new SomeObject("url"); which internally connects to the web application on internet. When I run this application I am getting connection error. Which prevents from internal firewall. How do I solve this problem. Which must be done transparently with out affecting my internal code. How can we by pass from proxy server to connect to the internet. I heard HttpClient from apache can be used. How this can be used. Please provide me some sample to overcome this.
Thanks.
Phani.

See [Java Networking and Proxies|http://java.sun.com/j2se/1.5.0/docs/guide/net/proxies.html].

Import Image Sequence and Alpha Channel Transparency?

Hello --
I need to go from PNG sequence (with alpha channel transparency) to FLV (with alpha retained), and am trying to do this in QuickTime Pro. Seems like this should be possible.
When I import a sequence of PNG images into QuickTime Pro, the alpha channel displays as solid black. When I export the movie as FLV (using On2 VP6 Codec, which supports alpha transparency), there is still a solid black background, and no transparency. I have looked everywhere in QT Pro for transparency settings, but to no avail. Any tips would be hugely appreciated. Thanks in advance!
Mike

Thanks, but something is not working.
Going back to your original post, when I do Cmd-J, then set transparency to "Straight Alpha," the movie background immediately changes from black to white. So far so good. But if I export that movie as MOV (Animation, no compression, millions of colors+), then bring it back in, and confirm with Cmd-J, the transparency setting is gone. Am I missing something?

Voice Over channel

This is a quick one. As you know, when you record voice over, it is recorded under one channel normally the left one.
It there a way to "stereo-ise" this recording or at least to double the mono, so the you can hear it from both channels?
Cheers
Hisham

If I'm not mistaken, the audio from the "voice-over" channel comes out of both sides. At least it did when I did a voice-over on my vacation video. Also, when you import sound effects or songs, they only show up on one of the two audio channels, but I believe the sound is stereo (or mono on two channels). I add lots of sound efx to my slide shows and movies and I can't ever remember only hearing them only on one channel (the one they record to in iMovie).

Mic Connected through USB adapter gives High pitch voice in playback

My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
And My mic works fine with quicktime audio recording or other audio recording software.

hello32 wrote:
My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
most likely the sample rate of your audio interface is too low, it must be set to 44100 in Audio MIDI Setup utility.
similar to the issue of an imported file playing too fast/high pitched:
http://www.bulletsandbones.com/GB/GBFAQ.html#toofast
(Let the page FULLY load. The link to your answer is at the top of your screen)

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

Unable to make a transparent connection from non root user

Hi
I am trying to make a transparent connection from a non-root user and I am having permission denied when trying to generate ssh keys, as per below:
$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/global/xnode/taprap/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
open /global/xnode/taprap/.ssh/id_rsa failed: Permission denied.
Saving the key failed: /global/xnode/taprap/.ssh/id_rsa.
Its working fine as root user, but not for any other user.
Please can you help
FR

Hi
for /global/xnode/taprap I have:
drwxrwxrwx 35 taprap other 59904 Sep 30 10:35 taprap
and for the .ssh
ls -al .ssh
total 122
drwx------ 2 105 other 512 Jan 27 2009 .
drwxrwxrwx 35 taprap other 59904 Sep 30 10:45 ..
-rw-r--r-- 1 105 other 440 May 3 2010 known_hosts
ls -al /.ssh/id_rsa
-rw------- 1 root root 883 Mar 15 2011 /.ssh/id_rsa

IPod touch 4G with interferance on 1 channel when connected in my car

I have an iPod touch 4G with interferance on 1 channel when connected to my VW Golf (2009) using VW cables and a RNS510 stereo system. I can only listen to it if the balance is full left channel! Tried it in another car and it is fine. Tried my sons 2G touch in my car and that is fine. VW say the stereo is fine? I used the same settings as the VW technician's iPod his was OK and mine wasn't. Any ideas how to fix this?
Thanks

Try turning off your iPod and turning it back on. It might Help.

WRT54G v8 - searching for Channel after connected, then fails, no internet for wireless connection

So I have Time Warner Cable Internet
WRT54G v8 with the 8.00.2 software
MAC Address Cloning off
WEP encryptian with 64-bit
Tpad1 - Thinkpad z61p
Tpad2 - Thinkpad T41
Dell - Crap
All of these worked two weeks ago and I can't remember installing or removing any software on any machines.
I have had a few of the problems that many have had so far and it is hard to narrow down what the true symptoms are so I will start with these.
If I power cycle cable modem, then plug in router, then wire connect in Tpad1 internet works fine. If I try to add the Dell wireless internet most of the time works fine. But when I try to unplug the Tpad1 and it tries to connect wirelessly it can't do it and then the Dell loses connection and the power light blinks and then stops and then blinks again.
I also had the settings open on Tpad1 so that I could see some detail. It looks as if the software on the Tpad1 is trying to find a channel to connect to, then it will connect on the channel I specified in router at 54mbps work for a Google page load then disconnect and start searching for a channel again and the connection drops to 1mbps.
After this if I turn the Tpad1 off and try to connect the Dell wirelessly that won't work, and if I try to connect through wire it does not connect either. I need to unplug or reset the router.
Possible Solutions:
1. re-flash router - will try
2. Change wireless settings such as beacon interval to 50, framentation threshold to 2306 or 2304, RTS Threshold to 2307 or 2304
3. Using CD to install the internet connection

So this is still an issue.
I have come to find that if I am only connecting my Tpad1 to the wireless router it eventually works. It connects and then when I try to access a web page it starts looking for the channel again and then finds it again. Once this happens three or four times (looking for the channel) it seems to get a solid connection and no longer looks for another channel.
After this I think it is okay for the Dell to connect but I can't 100% remember now.
We just have avoided using our computers at the same time on the wireless network together.
also.... when the Dell is connected and then Tpad1 tries to connect, Tpad1 kicks Dell off and Tpad1 can't connect with a solid connection; and after three or four times of re-connecting for both computers the wireless network becomes no longer visible, almost like the router locks up. So a reset of the router and the Dell can connect fine as long as the Tpad1 does not even try.
This post is being done by Tpad1 connected wirelessly because I am working from home and no one else is trying to get on.

Hardware requirement for voice/fax channel from T1?

Hi all,
I don't know if this is the right forum, but I am looking for validation on my interpretation of hardware requirements.
The scenario:
I currently have a T1 coming in to the facility and terminating into a vendor-supplied Adtran box which splits off one of the channels from the T1 for voice/fax use (the Adtran has a centronics-style connector going to a 66 block)
I am also in the process of ordering ADSL service to supplement the bandwidth for non-business usage.
Rather than end up with a solution involving an adtran, ADSL modem, and router or two... I want to combine all services into a 1751 chassis. My only concern / confusion is how to 'split' off the single voice channel from the T1. There is a phone # associated with the voice channel.
I believe that I will need the router, a multiflex T1 WIC (VWIC-1MFT-T1), ADSL wic (WIC-1ADSL-DG), and an FXS card such as the VIC-2FXS
Am I close here, or completely off base? Any input or suggestions would be appreciated.
Thanks!
-P

Paolo,
Thanks for the reply - I guess I'm just trying to figure out if the way I described is the 'concept' and correct WIC/VWIC combination of how to get an analog dialtone from a T1 channel while leaving the rest for data.
I know there are probably many more benefits to going with a more modern router, but this is for personal use (the T1 is tied to a business account, but hosted in my house and maintained by me) and I can't really get an ISR in my price range - 1751s, on the other hand, are easy to come by and affordable - I just want to ensure I can have a single line available for Fax
Thanks!
-P

Alpha Channel Transparency Rendering

Forgive me if this is somewhere on this forum as the forums are a bit confusing to me. If it is please point me in the right direction.
I am trying to create a simple effect and then use that effect as a luma matte in a NLE like Final Cut Pro or Avid. What I am not sure how to do is to render the video file so that it will have an alpha channel or transparency information. A work around I have tried was to create the image and lower its hue/saturation and then remove the hue/sat and use the two together but that had unpredictable results. If it helps I'm using the spike light ball effect on a black solid with its count turned up and its global angle animated to +15 after 10 seconds so basically the light does a cool rotate effect. Thanks for any help :)

Render and export to a format that can include an alpha channel. Make sure that you have selected the option(s) in the export settings that tell the encoder to include the alpha channel. One such setting is the bit depth Millions Of Colors+, in which the plus sign refers to the alpha channel. Another example of such a setting is the Encode Alpha Channel option in the Video tab of the export settings dialog box for FLV output using On2 VP6 codec.
For more information, see the
"About alpha channels and mattes" section of After Effects Help on the Web.

Spot channels transparent in Illustrator

Why do spot channels appear to have transparency, or at least a layer blend, when placed in illustrator? I even made sure that the solidity is set to 100%.
Picture 1 is in Photoshop showing how the graphic looks to be opaque.
Picture 2 is from Illustrator showing how the placed graphic looks over some Illustrator [vector] art.
Any thoughts?

Solidity only affects Photoshop’s preview and has nothing to do with actually knocking out the process-colours.
That could be done manually, especially as one might have to consider trapping.
It’s not transparency in such a case, but overprinting – transparencies apply to layers/objects, not channels.

IM08 supports alpha channels/'transparency'

in case, this is new to you (it was for me...):
iM08 supports pictures, which contain alpha-channels..
so, it is now quite easy for the ambitious iMovie-maker, to add 'bugs', 'mattes', even soft-bordered 'masks' to your project.
as an example, I'm adding here a 'bug' (=stationairy logo') to one of my projects....
I create a picture in Photoshop Elements, containing transparency as 'background', and my lil' logo drops a shadow (not seen in this size). I then import to iPhoto, as .tiff, which transport transparency-info ... the Photo-bin shows it (1)
than, the usual routine: drag it over your video (2) ... the blue blar indicates the position in time, you can elongate it, etc.
as you see in the preview (3), my logo is added, ... in the final movie, it drops a nice semi-transparent shadow onto my video..
for sure, you can create in a pic processor other things to 'add', e.g. 'dream masks/mattes', which add the movie a fade-to-white borders (flowers?), ... or, simple arrows, circles, boxes for instructional videos.. keep imagine!
a more elaborated and illustrated How-To as usual on my site:
http://karsten.schluter.googlepages.com/im08tricks
(.. lists gets longer, should think about restructruring that...)
just to mention that: that was NOT possible with iMHD≤6 ...
Have Fun with iMovie!

In addition to what David says:
if you rendered your timeline already, then exports will have black background.
If it's unrendered and then export, then the alphachannel will be included (with a codec that supports alphachannels of course)
to check what you are exporting: in the top of the canvas click the most right (of three) button and choose Checkerboard as the background.
If you now see the checkerboard, then you'll export with alphachannel. If you see black background then you've already rendered, and black will be exported. You can trash your renders using Tools > render manager. Or simply drag a clip over (1 videolayer higher) your title clip. And then delete this clip. It flushes your render.
Hope this helps
Rienk

Voice Memos will not play through Home Sharing on other devices.

I have synced my voice memos to my Apple library on my Mac Mini and can listen to them on that device with no problem. However, when I use my iPad or MacBook or Air to play the memos using my Home Sharing the voice memos will not play on the device. Sometimes a random song will start instead of the voice memo. I can play videos and music through Home Sharing with no problems, it seems to be only the voice memos that won't stream to the connected devices. Any help would be great (using Yosemite on devices).

I'm running 4.3.3 on mine and just played Joe Ely's latest album on my 1st generation Zeppelin. I do get the message about it not being compatible and possible noise but I dismiss that and play the music.
You may need to reset your Zeppelin (disconnect it from power, wait 2 minutes, plug it back in), Reset you iPhone (hold down the sleep and home buttons, ignore the red Off slider, wait for the Apple logo, let go of the buttones) or do both.
You may also need to update the firmware on your Zeppelin if you have not done so before now.
Message was edited by: deggie

SMTP Receiver Communication Channel error: connection refused

Dear all.
When migrating processes from XI 3.0 to PI 7.1 we run into the problem that we can't get the SMTP Receiver Communication Channel working on PI. We get the following error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect
(The NetWeaver Administrator log shows the following:
unable to call the mailer: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect)
- We copied all configuration settings 1-on-1 from XI to PI, and double-checked we made no mistakes.
- We confirmed the PI system can in fact reach the mailserver by successfully sending Email from the ABAP stack of the PI system (transactions SOST and SCOT)
- When deliberately mistyping the mailserver URL, we get the error: java.net.UnknownHostException. This makes me believe that the 'connection refused' error we get (after re-entering the correct mailserver URL) is indeed coming from the mailserver. But why would it refuse the connection if it allows the connection from the ABAP stack of the same server? And why didn't we run into any such problems on XI?
Any help is much appreciated!
Kind regards,
Eddy Driessen.

Hi All,
We have upgraded our XI3.0 system to PI7.1 and currently performing testing for different adapters. We are also facing similar problem for a scenario File to Mail
19.11.2010 11:31:56     Error     Mail: error occured: java.net.UnknownHostException: [url]
19.11.2010 11:31:56     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
19.11.2010 11:31:56     Error     Adapter Framework caught exception: Failed to call the endpoint
19.11.2010 11:31:56     Error     Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to:                     com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null " null"];                     nested exception caused by: java.net.UnknownHostException: [url].
19.11.2010 11:31:56     Information     The message status was set to WAIT.
*[url] = Mail server
Can anyone suggest the steps to solve this error
Thanks
Varun

E1 to E1 DTI voice 30 channel transparent connection through WAN

Similar Messages

Maybe you are looking for