E1000 Disconnecting for every 3-5 minutes

I am using Cisco E1000. since 1.5 years I am using the internet through this router. Past1 week i am geeting freeqent disconnecting of my internet (for all systems & devices). I am using DHCP connection with static IP. Please check the attached image for your reference.

rocknshake wrote:
I am using Cisco E1000. since 1.5 years I am using the internet through this router. Past1 week i am geeting freeqent disconnecting of my internet (for all systems & devices). I am using DHCP connection with static IP. Please check the attached image for your reference.
Try to make sure first if direct connection to the modem is stable or not. If stable with the modem, upgrade the firmware of the router. Double check the hardware version for that also - if your router is a hardware version 1 then download the firmware for version 1. You can download it here: http://homesupport.cisco.com/en-us/support/routers/E1000. If ever the firmware is the latest already then do a reflash (same manner as upgrading it) then reset and reconfigure your router. You can lower the MTU size but are you on DSL internet service or Cable internet service? You can use 1472 for DSL and 1365 for Cable but it is best to ask your ISP about that one. If your router drops with wireless connection as well, set the wireless channel to something else like 1,3,6,9, & 11 and make use of WPA2 Personal for security.

Similar Messages

Wifi Disconnects for every 2 Min

I have problem with my wifi connection to iphone.
It connects and again disconnects for every 2min.

Hello Ram,
It sounds like your Wi-Fi connection keeps dropping over and over every couple of minutes. I would try the troubleshooting steps from this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
First this section:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And if needed, this section toward the bottom:
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling

URGENT: WLAN disconnecting every 10-15 minutes on windows 7 laptop

hi there
i have 2 laptops, one runs xp home and other one runs win 7 ultimate, both machines have pretty much the same stuff on.
the difference is that with the XP one wireless works great with the web authentication and never disconnects, with the win 7 machine instead, it disconnects me every 10-20 minutes or so, i came up with a trick that is to keep a streaming radio on the background, that way sometimes im connected also for 2-3-4 hours but looks like it times out again after an XX amount of time.
so should i change the MTU value on the win 7 machine? that seems to be the workaround it by reading here and there....happens the very same with either firefox 3.6 and internet explorer 8.
on the win 7 machine i installed TCP-Z driver...... > TCP-Z, Best TCP/IP Patch from http://deepxw.blogspot.com/ i tried to disable it and run some tests, but nothing changes.
help much apperciated, please answer here or to my mail gabrio81ATgmail.com
thanks
gabrio

problem fixed: https://supportforums.cisco.com/thread/2026180?stqc=true

Creative Cloud Disconnecting/Logout every few (about 5) minutes

Adobe Creative Cloud (1.2.1.2.60) does log out every few (5) minutes. When I start an application I have to login again or accept trial conditions. It is very hard to work. Subscriptio is valid, Payments are done and accepted. It is occuring since last weeks, before it worked all very fine.
System:
Modelnaam:
iMac
Modelaanduiding:
iMac12,2
Processornaam:
Intel Core i5
Processorsnelheid:
3,1 GHz
Aantal processors:
1
Totale aantal cores:
4
L2-cache (per core):
256 KB
L3-cache:
6 MB
Geheugen:
12 GB
iOs: 10.9 Build 13A603

Hello Jeff,
Thanks for your answer. I took some time to take all steps.
I did make a test account, and there Adobe Cloud is working fine. So I took alle steps to solve it. In the End, because nothing helped, I did uninstall all applications. I did reinstall Adobe Cloud, and again: the problem does disconnect every 5 minutes in the main account (again: test is working fine).
When logged in into Adoube Cloud, the program still sees some components that are already uninstalled (see image). It makes think there is someting not deleted form the system or there are some rights not OK.
Are there hidden files or configuration files that I did not see? Furthermore: Cloud is working in the testaccount with default filerights, and is not working with all rights in my default account (see image).
To be honest, I don't know what to do next...
Regards,
Harry

My IMAC has been disconnecting from the internet every 15-17 minutes

My IMAC has been dsconnecting from the internet every 15-17 minutes on the dot its crazy, there have been few occasions where it makes it past the 15-17 minute mark and stays connected for 3 hours!!! Its crazy, my computer apparently stays connected to my router but i dont get any internet connection after while. To get internet connection i have to keep disconnecting and reconnecting from my router, its super annoying. Ive tried almost anything, but nothing seems to work it just keeps disconnecting from the internet every 15 minutes. Please HELP!!!!! (Im currently running OS X 10.10)

Ive tried almost anything
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

gets and error and closes.What should I do?
If Safari is crashing.. post a crash report so we can try and help...
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

How can I display summary for every 15 minutes using DATE datatype

This is probably an easy question, but the answer eludes me...
I am trying to write a SQL report that displays aggregate totals for every 15 minute period. I know you can do something like this to get every minute:
select to_char(import_date,'MM-DD-YYYY HH24:MI'),
count(*) from
package_ingest
group by to_char(import_date,'MM-DD-YYYY HH24:MI')
But how can I change this query so that I get every 15 minutes?
Any feedback is greatly apprecaited!
Thanks,
-ADK

Hi,
GROUP BY TRUNC (SYSDATE) + FLOOR ( (import_date - TRUNC (SYSDATE))
                                      * 24
                        * 4
                        )SYSDATE is an arbitrary reference point. It doesn't matter if import_date is earlier or later (or sometimes earlier and sometimes later).
If you want to display this in the SELECT clause, or use it in the ORDER BY clause, then repeat the expression there, or compute it once in a sub-query.
WITH got_i_d_15     AS
     SELECT     TRUNC (SYSDATE) + FLOOR ( (import_date - TRUNC (SYSDATE))
                                           * 24
                             * 4
                             ) AS i_d_15
     FROM     package_ingest
--     WHERE     ...          -- If needed
SELECT       TO_CHAR (i_d_15, 'MM-DD-YYYY HH24:MI')     AS import_date
,       COUNT (*)                               AS cnt
FROM       got_i_d_15
GROUP BY i_d_15
ORDER BY i_d_15;

A new file creating in 'C' drive automatically for every 3 minutes in Windows 2003 SBS

Hi
The files are in this format with 32bit count {00000000-0000-0000-0000-00000000000} and all are the same with different file names and they are encrypted.
Please let me know why they are creating for every 3 minutes & what is the purpose of these files and if we delete will it be a problem.
Few files names {408F187E-8B9B-47AC-BAF8-05D034003937}
{AF3DD6DB-6645-4A33-B51B-84F0BF376C3B}
{7531B20D-88CE-4A93-A08D-FD2AA3A0F4D8}
Thanks

Hi Hemanth.D,
Before going further, would you please let me know the file type of those files which created automatically?
Meanwhile, please let me know the detailed path of those files in C drive.
In addition, did you install any third-party application (may run periodically) on the SBS server recently?
If possible, please perform a clean boot and check if this issue still exists. Please open Event Viewer and check if relevant events were logged.
If any update, please feel free to let me know.
Best regards,
Justin Gu

How to execute a loop for every 15 minutes

how to execute a loop for every 15 minutes or 30 minutes constantly...

I need to insert a number into an array for every 15mins continuously..and the array need to hold all datas for example in 0th position i insert a value 10 by 10.00am, after that at 1st position i need to insert 11 by 10.15am, next at 2nd position i need to insert 12 by 10.30am and so on...how this can be done

Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again I tried all but nothing, everything works except the call I have an iPhone 4 Version 6.1.3

every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
I tried all but nothing, everything works except the call
I have an iPhone 4 Version 6.1.3
thank you for your help

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

Does a basic local/long distance plan charge for every minute you are on the internet

I'm thinking about changing my Freedom Essential plan to just a basic plan since we seldom use the phone. I just wondered if we would actually save any money if we have to pay for every minute we are on the internet.
Thanks,
Deb

Atmamea::
If the information above doesn't solve your problem, you can also contact customer service. In most situations, you can request "call billing detail" at no (or low) additional charge, and your monthly bill would then automatically include detail for all calls, even though you're not paying an additional charge for them.
(As a sidenote, be sure to ask if there is an additional charge. In some areas there may be a per-page charge.)
Hope this helps!

[SOLVED] getting disconnected every 5-30 minutes

Hello,
my problem is that every 5-30 minutes i get disconnected and need to reconnect again.
I had this problem in gentoo, and opensuse 10.2. But not in ubuntu gutsy or opensuse 10.3.
i got no idea why it does this, any idea what can be wrong?
Last edited by aualin (2008-01-05 14:56:38)

I think i solved it... i'll report back later too see if i fixed it.
Last edited by aualin (2008-01-04 22:08:29)

OS completely stalls for 1-2 minutes about every 5-10 minutes

Hi there,
I find that my OS completely stalls for 1-2 minutes about every 5-10 minutes and not clear why. I am running "top -o cpu" from the shell and dont see a process that is hogging the CPU. One issue is that top even stalls with the entire machine.
I am using an MBP duo core 2 with 2GB of memory.
rebooted from the OSX DVD, ran disk check, and the disk is fine.
What is a suggested way to isolate the trouble.
Cheers,
Noah

Disk Utility First Aid doesn't do as thorough a job checking as Alsoft Disk Warrior.
Use SuperDuper to copy your drive to another drive. Try running off that to test things out.
Also, if there are changes to Disk Utility in 10.5.2, using the DVD is fine if you must, but better to run off a hard drive.
Safari's cache grows huge and needs to be reset or deleted from time to time
~/Library/Caches - those are all rebuilt if needed.
Most system stability problems with cache though are in
/Library
Try a new user account after you clean out as much temp files, logs and 'junk' as you can.
You might also install OS X to a small 20-30GB partition just for repairs and emergencies, in addition to a bootable working copy.
If you don't want SuperDuper, Carbon Copy Cloner is also a good option for backup and cloning.
Disk Warrior though is the best way to keep a drive healthy, used regularly for preventative drive repairs along with backups.
Onyx and Tiger Cache Cleaner are designed to help with numerous system maintenance tasks. Buit-in help, terminal command 'man' pages and more.
And try a Safe Boot into your "test" account AFTER you have backups and make sure your drive really is A-OK.

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

E1000 Disconnecting for every 3-5 minutes

Similar Messages

Maybe you are looking for