E1200 - did not work with my computer

I tried to hook it up, called tech support and was on the phone with them for more than half an hour worked for a while then stopped. I gave up and sent it back Amazon.com was great to work with

Eventually Router should work... What was the exact concern that you were facing with the router ? How you were configuring the Router, was it with the help of the Cisco Connect Software or you were doing manual setup ?

Similar Messages

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

Sync did not work on new computer and original computer is broken.

I always synced Firefox on my original computer, clicking it once a day on the little menu on the top right, on the sync buttton with my e-mail beside it. I had all options checked (passwords, history, bookmarks, etc). Then, my computer broke, and it is a hard drive problem so it will come back completely erased.
Now, I accessed another computer on Firefox and Sync did not work at all. None of my information was saved, even when I click on Sync.
Both computers are Macs, one running on 10.6.8 and the other (broken) ran on Yosemite. Both had Firefox on the New Sync.
Please and thanks.

This game was designed for Windows 95. Many older games wont run under the NT kernel (under XP and Vista) unless you use emulation such as DOSBox.
You could try setting the game to run in Windows 98 compatibility mode (Right click the games EXE file, choose Properties -> Compatibility Tab).
Otherwise you may need to install Win95/98, and possibly use an older Video Card since the display drivers change so rapidly and drop legacy features not used anymore.

My sound is not working with the computer speakers and with headphones, help?!

my sound is not working with my headphones or the the computer speakers

You indicate you have a "brand new Air", you have a 14 day exchange, and the warranty of which you paid for regarding genius bar in-shop diagnostics (and repair if necessary)
What year model Air do you have?
On the first question,....are the headphones attached when you have your Air in sleep?
If yes, then refrain from having phones attached when you close the monitor to prevent this until it is resolved
resolution as to same yet, no.

C3 did not work with all the types of routers

Hi!
My problem is with the C3 (Hungarian 03.36 Vodafone), that the e-mail program is not working with all the wlan routers. My home router is Asus WL-520GC and with it I get communication error, but with a Linksys or a Tplink router everything is good. How can it be?
(I ve heard it from outhers too)
(both WPA2personal and DHCP)
I tried it with factory settings, but same problem: communication error.
Pls help!

Solved: I had to upgrade the firmware of the router.
It works

Update panel did not work with ajax control toolkits

hye there, can anybody helps me about the update panel. I have a grid view that must show the file that i already browser. in my situation i am using Ajax control toolkit so it automatically will upload the file in the grid view. Unfortunately it did not
work but the other code is work. this is my code
function clearContents() {
var AsyncFileUpload = $get("<%=MemoFileUpload.ClientID%>");
var AsyncFileUpload = $get("<%=AttorneyFileUplod.ClientID%>");
var AsyncFileUpload = $get("<%=TORFileUpload.ClientID%>");
var txts = AsyncFileUpload.getElementsByTagName("input");
for (var i = 0; i < txts.length; i++) {
if ((txts[i].type == "file") || (txts[i].type == 'text')) {
txts[i].value = "";
txts[i].style.backgroundColor = "transparent";
if (txts[i].type == 'text') {
txts[i].value = '';
function uploadComplete1(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton.UniqueID %>", "");
function uploadComplete2(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton2.UniqueID %>", "");
//the code that works
<td>
<%-- <asp:FileUpload
ID="MemoFileUpload" runat="server" Height="25px" Width="275px" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete1" runat="server" ID="MemoFileUpload"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader"
OnUploadedComplete="btnMemoUplod_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button runat="server"
ID="HiddenButton" Style="display: none;" />
<asp:Image ID="imgLoader"
runat="server" ImageUrl="../Images/loader.gif" /> 
 
<img id="imgDisplay"
alt="" src="" style="display: none" />
</td>
<td align="right">
<asp:Button ID="btnMemoUplod"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnMemoUplod %>" Visible="false" />
<%--CssClass="ButtonStyle"--%>
</td>
<asp:UpdatePanel ID="update1"
runat="server" UpdateMode="Always">
<Triggers>
<asp:PostBackTrigger
ControlID="btnMemoUplod" />
<%--<asp:PostBackTrigger
ControlID="GridInspection" />--%>
<%--
<asp:AsyncPostBackTrigger ControlID="btnMemoUplod" EventName="Click" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</tr>
//the code that did not work
<td>
<%--<asp:FileUpload
ID="AttorneyFileUplod" runat="server" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete2" runat="server" ID="AttorneyFileUplod"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader1"
OnUploadedComplete="btnAttrnyUpload_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button
runat="server" ID="HiddenButton2" Style="display: none;" />
<asp:Image ID="imgLoader1"
runat="server" ImageUrl="../Images/loader.gif" />
</td>
<td align="right">
<asp:Button ID="btnAttrnyUpload"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnAttrnyUpload %>" visible ="false" />
<%--CssClass="ButtonStyle"--%>
<asp:UpdatePanel
ID="Update2" runat="server" UpdateMode="Conditional">
<Triggers>
<asp:PostBackTrigger ControlID="btnAttrnyUpload" />
<%--<asp:PostBackTrigger ControlID="grdAttorny" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</td>
</tr>

Hi,
For ASP.NET problem, please post in ASP.NET forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks MSDN Community Support Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

ITunes will not work with my computer. iMac G3 processor, OS 10.4.11

Original message posted about a week ago - I have an iMac, OS is 10.4.11. I just updated my Quicktime software to 7.5, I also updated my iTunes to 8.2.1 (I think, it is definitely higher than 8.0). When I would open up iTunes. I would get this message. (We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later). This was happening before I did the current downloads. I had no trouble about 3-4 weeks ago. I was able to get into the iTunes store and download song. I am pretty annoyed to say the least. Apple makes it so difficult to get information, unless you do endless searches. Trying to contact customer service is a whole other nightmare. They offer this software for free, yet they want you to pay for everything. As you can imagine, I am not happy and venting is helping. So I am hoping there are some other people out there with similar problems who can help. Nothing has been changed or altered on my computer. I have no problem connecting to the internet. No passwords or ID's have been changed. As mentioned I updated my software to the highest, most current software available that my operating system can handle. So if anyone out there knows what is going on, or can help. Please advise. Thanks, from a very frustrated apple user! You can email me direct too <[email protected]>
Updated message 12/9/10 - I updated my iTunes version to 9.2.1. Now my iTunes will not open. When I do try to open it, It says that this program will only work with G4, and G5 processors. I don't know what to do. I can't afford a new computer right now. Any suggestions???? PLEASE HELP!!I am so frustrated!!! Thanks for your help.

OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

Hard drive broke. ipod not working with new computer

Hello,
My computer hard drive recently died on me.
I got a new hard drive installed and I downloaded a new version of itunes (I think the latest) but when I connect my ipod to my computer, although it turns on the ipod, my computer isn't reading the ipod. I tunes isn't being started up and when I start it up manually it doesn't read my ipod either.
Someone at work here suggested it may be that the version of itunes I have installed is not compatible with the ipod I have. My ipod is a couple of years old at least. Can that be possible?
Any help greatly appreciated.

I have the exact same problem. Any help would be appreciated.

Ipod not working with my computer.....help

ok my ipod been like this since 5 months ....the problem is that my ipod will not connect to my computer i tried everything but everytime i try to connect it it just sits there and a couple of seconds the recharge bettery logo shows up. i tried deleting all my music in my computer and reinstalling itunes but it is still is the same. i tired connecting it to other usb cords and tried connecting into diffrent ports on my computer but still nothing... can someone help me pls because i cant upload nething into my ipod and im tired of listeing to the same songs now thx........

after 2 weeks of searching apple.com and other forums online for why won't itunes work, i bought a windows compatible mp3 player (Creative Zen Nano) and it wouldn't work either so realized it was my OS. since i am not computer smart at all - i got someone to reformat my PC - had to save everything to disc that i would need after - as i guess doing this restores your computer to the day you bought it. But after itunes worked with no problems....good luck.

IPod not working with my computer

I hadn't upadated my iPod in around a month when i noticed that some of the songs wouldn't play at all, some would play for a little while then skip to the next one, and then the ones that would play took a while to start up. I tried to update my iPod but iTunes didn't recgonize my iPod. My desktop would show that there was a "Mass Storage Device" but it would not stop the device so that i could safely remove it. After fiddling around with my computer nothing was happening, so I unsafely removed it by just plain out pulling the USB plug. Then it showed to apple symbol and then the folder with the exclamtion mark. Then i reset my iPod and over the course of trying to fix it i reset it about 5 more times. I reinstalled iTunes and iPod updater. I restarted my computer. I put my iPod in disk mode and then plugged it in. My computer showed that there was a "Mass Storage Device" but iTunes didn't recgonize the iPod and when i clicked on My Computer but it didn't show up. Then when i turned my iPod off and on again it turned on like it normally does with the same problems i said above. I then tried to restore my iPod by using the iPod updater. I plugged my iPod in and then I opened the updater. It says initializing and then just sits there untill it doesn't respond. My iPod just says "Do not Disconnect". Any help could be appreciated. Thank you
Windows XP Home Edition 2002: Dell DIMENSION 8400 Intel(R) Pentium(R) 4 CPU Windows XP 3.19 GHz, 512 MB of RAM

I got the same error, still cant fix it. Try this?
Here you go, the definitive guide to fixing these chugged-up iPods. I had the exact same problems described below, and it took a variety of methods to fix.
Attempt the following methods at your own risk! You will loose all your stored music and settings on your iPod. Apple's Support articles are still the best way to safely restore a non-functioning iPod. Remember, the best way to repair a damaged or non-functioning iPod is through your authorized Apple retailer or through Apple's Mail-in support services.
Step .5 - Plug iPod into wall adapter and let sit overnight (charges and attempts to start all night)
Step 1 - Completly uninstall iTunes and iPod updater, restart your computer.
Step 2 - Reinstall iTunes and iPod updater (in that order). Restart your computer.
Step 3 - Holding iPod perpendicular to the ground, with the bottom of the iPod closest, drop the iPod from approx. 4 inches onto a soft carpeted surface. (you can start by dropping it onto your bed or pillow first)
Step 4 - Start iPod (press menu button). If iPod fails to start, repeat step 3 and 4 with increasing heights (2 inch increments)
Step 5 - Once iPod has started into the menu screen, verify that there is no (or little) disk damage by playing a song or two.
Step 6 - Place iPod onto a flat surface face up. Put the iPod into Disk mode using the following procedure:
i. Turn hold on, then off
ii. Press and hold Menu and Select buttons simultaneously for approx 6 - 10 seconds. Release when display 'flickers' and goes blank
iii. When the Apple image displays on the screen, immedeatly press and hold the Play/Pause and Select buttons. Continue holding until the iPod enters Disk Mode, signified by an "OK to Disconnect" prompt and a check-mark.
If you are attempting to connect your iPod to a Toshiba laptop/Tablet PC, then complete the steps outlined in Apple Support Article 300836 - http://docs.info.apple.com/article.html?artnum=300836
Step 7 - Plug in your iPod using the supplied FireWire or USB cables. Allow Windows to recognize the iPod and allow iTunes to open. This may take up to 2-4 minutes. A rotating arrow will appear in the iPod screen at the upper left-hand corner. This signifies your computer is communicating properly with the iPod.
Step 8 - When iTunes window appears, it may prompt you if you want to associate your iPod with the library. Cancel all prompts and close iTunes.
Step 9 - Open the iPod updater, and click restore.
Step 10 - When the restore is complete, the iPod will display an image of the adapter plugging into the wall. Disconnect your iPod from your computer and plug it in with the included power-supply and FireWire cord.
Step 11 - The iPod will boot up normally, showing a progress bar at the bottom. The language select screen will soon show up afterwards.
If you are attempting to connect to a Toshiba computer, complete the steps "Re-enable high-speed interfaces" in Apple Support article 300836 - http://docs.info.apple.com/article.html?artnum=300836
Step 12. Plug in your iPod normally. Allow iTunes to boot up. (This could take another 2-4 minutes) A prompt will appear asking you what you would like to name your iPod. Follow the onscreen instructions.
Congradulations! You have successfully fixed your iPod. Once again, attempt these methods at your own risk. I am not responsible for any damages or loss of data incurred by the following steps. An Apple Retailer is still the perferred way to repair your iPod.
Source: http://discussions.apple.com/thread.jspa?threadID=249220&tstart=0

NETSCAPE 7.1 did not work with 2.0 Object Browser

If I use Object browser I can select table, view, sequence...
but nothing is shown. I tested on htmldb.oracle.com
All works fine with IE, ...
Query Builder works with Netscape

Hi Lutz,
Netscape 7.2 or higher is required.
Joel

Re: SD reader - did not work with 8gb card

Hi, how can I read my Micro SD (with SD adapter) - (8gb SDHC), my PC didnt see this card. If I plug my 2gb micro SD is all ok. Is problem with SDHC? or capacity 8gb?)
Thanks
[email protected]

Hi
I dont know what notebook you have but did you check the user manual? There you can find a list what types of SD cards are supported.
Check this!!!
Some notebooks can only read SD cards but not SDHC cards.

WIRELESS MOUSE DOES NOT WORK WITH MY COMPUTER

Tried several wireless mice but they only work for a short time; i am very frustrated! do not want to pay for HP tech service & want to know if anyone out there has been experiencing same problem; is it a setting problem? Is there a sight or link you could give me to solve the issue? would appreciate any suggestions

Chuck, welcome to the forum.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Also, what make/model of mice have you tried?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

E1200 - did not work with my computer

Similar Messages

Maybe you are looking for