E1200 MAC YOSEMITE SETUP

RESPECTED LINKSYS DEPARTMENT HEAD
 I M FACING PROBLEM OF NOT ABLE TO SETUP MY LINKSYS E1200 DUE TO MAC YOSEMITE ON MACBOOK PRO 
NEED SETUP SUPPORTING MAC YOSEMITE .
REQUEST YOU TO PROVIDE ME SETTINGS ,

If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://cognitiveanomalies.com/cisco-nat-how-nat-works/ If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
Prefered connection method with a ISP stand alone modem:
ISP modem>router<>connected devices.
Connection method with a ISP modem with built in router that can be bridged:
ISP modem(bridged)>router<>connected devices.
Connection method with a ISP modem with built in router that can't be bridged:
ISP modem(DMZ)>routers WAN ip address placed in ISP modems DMZ<>connected devices to WRT router.
DSL PPPoE Setup:
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687

Similar Messages

  • Yosemite setup, migration assistants and timemachine restore didn't transfer ANY files to SSD

    Hi,
    I'm at a total loss after 2 days of trying to upgrade my hard disk to an SSD in my Macbook Pro.
    I have tried Yosemite Setup assistant, the Migration Assistant in Utilities and Restore from Time Machine.
    All 3 processes run for 5 hours and say they are transferring information with a progress bar and finish saying my mac is ready to use, but none of these processes actually transfer a single file.
    At the end of 2 days, they have just created a new empty user. No user files, no applications, nothing.
    Please can you tell me what I'm doing wrong?
    Here is what I did in detail
    17" late 2011 MBP
    original 750gb HDD is full.
    bought a Samsung 850 EVO 1TB SSD and a caddy to replace the optical drive
    Left original HDD in place so I am transferring files between 2 internal drives (HDD->SSD)
    installed the SSD and formatted default option Mac OS X Extended (Journaled)
    rebooted into repair partition (10.9)
    Installed OS X on the SSD
    Setup assistant told me it could not transfer data because the HDD had a newer OS
    Skipped transfer and installed 10.10.2 Yosemite on SSD
    Yosemite successfully installed and working on SSD
    Opened Migration assistant on SSD in Utilities and selected everything to transfer from internal HDD to SSD
    Migration Assistant runs for 5 hours and says it is complete - but not a single new file has been transferred onto the SSD!!
    Read that Migration Assistant is less reliable than Setup Assistant
    Follow a guide to Boot into Safe Mode on SSD, delete user folders and setupdone file to trigger setup again.
    Restart SSD and use Setup Assistant as though new installation to transfer files from HDD.
    Setup Assistant runs for 5 hours  transferring files from internal HDD and says it is complete - but not a single new file has been transferred onto the SSD!!
    Reboot into repair partition (10.10) on SSD
    Erase SSD and install Yosemite again
    Setup Assistant runs for 5 hours transferring files from internal HDD and says it is complete - but not a single new file has been transferred onto the SSD!!
    Reboot into repair partition (10.10) on SSD
    Erase SSD and install Yosemite again
    Setup Assistant runs for 5 hours and says it is complete - but not a single new file has been transferred onto the SSD!!
    Reboot into repair partition (10.10) on SSD
    check HDD - repair disk found B-tree node and leaf count errors fixed disk OK and repair permissions some needed fixing
    check SSD - repair permissions
    Reboot into repair partition (10.10) on SSD
    Erase SSD and install Yosemite again
    This time connect an external HDD with Time Machine backup.
    Setup Assistant runs for 5 hours transferring files from external HDD Time Machine Backup and says it is complete - but not a single new file has been transferred onto the SSD!!
    2 days later I feel as empty as my new SSD: 981 GB free of 999GB
    Please help
    Thanks

    Hi,
    Thanks for the reply
    I just used Carbon Copy Cloner while waiting and it seems to have worked, except it cannot create the restore partition.
    If I try again using Restore in Disk Utility in the 10.9 Recovery Partition, will it create the Recovery Partition on the SSD as well?
    I was surprised that having installed Yosemite (10.10.2) on the original HDD, that the restore partition on that volume was 10.9 - how can I get my data and a 10.10 recovery partition onto the SSD?
    Thanks

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

    my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

    All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
    As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

  • Hi All,  I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"  I run a test print and its se

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

  • How do I set up a second iCloud account on my Mac (Yosemite)?

    How do I set up a second iCloud account on my Mac (Yosemite)?

    Hi selmjan,
    Welcome to the Apple Support Communities!
    I understand that you would like to set up iCloud on your Mac. Please use the attached web-link for information and instructions to complete this process. If you need information more specific to your situation, please let me know what step in the process you are on.
    Apple - iCloud - Learn how to set up iCloud on all your devices.
    Cheers,
    Joe

  • Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

    Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

    A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
    -Roger

  • After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

    After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

    Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

  • Error installing Adobe Download Assistant on Mac Yosemite 10.10

    I am trying to install trial of elements 13 on Mac Yosemite and getting the following error while installing the Adobe Download Assistant - This application cannot be installed because the installer has been misconfigured. Please contact the application author for assistance. Please help!

    I have the same problem with today´s version of Adobe Flash player on Mac OSX 10.6, and with Safari.  It works with Firefox 9.0.  The problem has been present for versions of Safari and Flash for over 6 months.  I am using a MacBook Pro bought in April 2011.

  • Unable to select logical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1

    Hi Team,
    I can not select logical and physical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1 (Java SDK 1.8). DataModeler does not allow me to select them. I mean the next scenario: I create two entities (or tables) and add a logical (or physical) relation between them. After this I can not select the relation in diagram window. Meantime I still can select the relation in browser window.
    Could you please suggest me is it a bug (maybe a platform specific problem) or did I miss something in software options?
    I found a topic about the same issue. It describes the same problem, though the topic is without an answer and was archived.
    New bug - Unable to select logical relations in version 4.0.2.15 Build 15.21 on Mac
    At the end, if this is a bug (even a platform specific one), where may I publish details about it to ask for a fix from Oracle team someday in future?
    WIth best regards,
    Kostyantyn

    Hi Philip,
    Thank you for the good hint about "default line width and colour".
    Meantime the option does not resolve the problem in my case.
    According to your suggestion I set maximal width for relation lines and I still can not pick (select) it in diagram window.
    I checked behaviour of DataModeler with next display resolutions on MacBook Pro (Retina, 15-inch, Mid 2014) in System preferences Displays: "Best for display"; Scaled "More Space", "Larger Text", and "Best (Retina)"... And the problem takes place in all these cases.
    Please see attached image - this is how I see the relation line. And I still can hit it!
    If I use the DataModler on a casual external monitor, the problem is absent (no matter what a width is). Also I believe the problem takes place only on mac retina displays. Therefore I think this is a platform specific bug.
    I do understand a root cause of the problem may have no direct relation with Oracle DataModeler source code.
    With best regards,
    Kostyantyn

  • Nokia photo transfer for Mac Yosemite OS

    Hi,
    It seems that Nokia Photo Transfer does not work in the Mac Yosemite OS – at least it does not find my Lumia 1020. Is there any chance of getting an update – or is there any other way to transfer photos speedily by a USB cable from Lumia to Mac?
    Cheers,
    Ilkka

    @Ilkko Photo Transfer 1.2.31 works with my OS X v10.10.2 and my Lumia 1520 phone with Lumia Denim as firmware. I attached the Lumia before I started Photo Transfer. Then, Photo Transfer asked me to unlock the password protected screen. Do you face any error message? We need that word for word.
    If you do not face any error message, please, enbale (tick) Photo Transfer » Menu » File » Enable Logs. Then, go for Finder » Menu » Utilities » Console (left hand side, All Messages). Anything specific there? You are able to copy and paste it here.
    If nothing is displayed in OS X Console either, please, go for Menu » Apple » About this Mac » More Info » System Report » (Hardware) USB: Is your ‘Lumia 1020 (RM-87x)’ listed there? Via System Information » Menu » File » Refresh Information, you are able to detach and attach your device, while double-checking the displayed information.
    If your phone is not shown in System Information, did it work before? Which operating system and version?
    If your phone is shown in System Information, please, we have to go for the USB Prober. However, because I have not tested that app on Yosemite v10.10 my self either, please, answer the above questions. Then, I look into that path here in more detail and give you an explaination what to do.

  • Dreamweaver CS6 will not open after Mac Yosemite 10.10.1 update

    Just updated to mac Yosemite 10.10.1 and now Dreamweaver will not open

    http://www.apple.com/support/mac/app-store/contact/
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • Borderless printing in Lightroom 5--Mac Yosemite, Canon i9900.  Selected 8.5x11 borderless media, but LR insists on printing with borders.  Tried adjusting cell size and margins, but LR won't allow setting to zero.

    LR won't allow me to adjust the margins below minimum values of about 0.25 in.  Borderless printing and 8.5x11 borderless media are selected.
    LR also won't allow me to increase the cell size.  It seems to have a maximum of 8x10.68.
    Aspect ratio of the image I'm trying to print is 8.5x11 so it should be a perfect fit.
    When I print the same image in Photoshop, it prints borderless just fine on the same printer.
    Mac, Yosemite, Canon i9900.

    I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).

  • Compatibility question between Photoshop CS 4 Version 11.0.2 and Mac Yosemite

    Hi, Does anyone know if my old Adobe Photoshop CS4 Extended Version 11.0.2 will be compatible with the new Mac Yosemite?  I have the photoshop installed on my iMac which has the old OS X Version 10.6.8., and am fearful it will not work in the new Yosemite.
    thanks

    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

  • Photoshop cc redraw issues mac yosemite

    having issues with mac yosemite, intel hd 4000 1024mb card, 16gb ram and 2.5 intel core i5 with photoshop cc 2014. it has redraw issues when you draw objects around the screen.. its jjittery and not smooth like it should be. i dont know why this is happening but would like to know when it will be fixed. it seems to only be happening on mac osx because i have bootcamp with windows 7 running on this same macbook pro and it runs perfectly fine on there. any ideas on whats going on and when this will be resolved?

    A downgrade don't work for me. The Mac is brand new (3 Days old). Yosemite is the custom os. I think a downgrade is impossible.
    I'm very disappointed about that, because i bought this machine just for Photoshop...

Maybe you are looking for

  • Apple Mail no longer receiving Gmail messages

    Hi When I upgraded to Mavericks over Christmas I could no longer send or receive messages via my Gmail account.  I recreated it and it worked fine until 21 January when I stopped receiving any messages.  I can send them OK, the Connection Doctor says

  • Is there a way to allow a person to duplicate a form in the SAME document

    I have a form that I need teachers to fill out for each student. I don't want them to have to submit 25 different forms. Is there any way for them to replicate the form within and submit one single document that includes all 25-30 students?

  • After downloading app on Ipad it goes dark and wont open on my iPhone..

    After downloading app on Ipad it goes dark and wont open on my iPhone.. I was wondering if i had to individually delete and re-install every app for them to work on my phone now? .. facebook, twitter, instagram, pintrest ect.. or is there any way to

  • How to restore some *.sql in oracle 10g

    Hi someone gave me a cd with .sql backup and told me to restore it in oracle. Can someone tell me how to do it or some hints in the type of recovery I should use? Thanks

  • Performance of MSEG table with MKPF and LIKP

    Hi, I am having an Issue with MSEG table. It has 6.5 lakh (= 650,000) records in Production System. Can anyone help me with its performance. The code I am using now is. SELECT MBLNR mjahr BLDAT BUDAT LE_VBELN FROM MKPF INTO TABLE IT_MKPF WHERE