E1200 - only 54 mbps Wi-FI with 801.11n notebook and slow download

Hi all,
I have got the E1200 router and Asus X54H notebook (Win XP SP3, 2.30 Ghz, 3 MB RAM).
I have configured the router properly, created the Wifi network, and when I put the cursor on the wifi network sign I see only 54 Mpbs signal. The router is located RIGHT NEAR the notebook.
Moreover, when I download from torrents with about 40-50 seeds, I get only 700-900 kbps download.
With my old 54 mbps b/g router and notebook I had about 2 mpbs download speed.
For Your info. I plugged the cable from router LAN port to notebook (cable connection) and did the Speedtest.net.
Here are the results:
donwload speed : 46.84 mpbs
upload speed: 26.81 mpbs
The link: LINK
So You see my cable channel is ok.
Please help! I will appreciate very much!

Make sure your wireless encryption is WPA2-AES for speeds over 54Mbps.

Similar Messages

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo, however when I try and open the package the error message "This volume is used for TimeMachine-backups". Which is not true. I´m using TimeCapsule.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo.
When I try and open the package after accepting the lincence-agreement and upon choosing the install-volume the error message appears: "This volume is used for TimeMachine-backups".
Which is not true. I´m using a timecapsule for backups.
How can I proceed?

I am using a MacBook Pro (2010) with 2.53 GHz Intel Core i5, 4GB, 1067 MHz, DDR3, Startvolume Macintosh HD.
After downloading the package and starting upgrading it asks acceptance of the license-agreement. After that it asks for the volume were to install. And when I click on the Startvolume Macintosh HD (which is the only available on the machine) it says: "The volume is already being used for Time Machine-Backups".
It doesn´t offer to skip that point or to reconfigure the Time Machine settings.
The point is that my Time machine is not and has never used the Mac HD for Backups. In the past I have used an external drive and since 05/2014 I am using a Time Capsule which is appropriately addressed in the Time Machine settings.

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

Is anyone with an iPhone 6plus experiencing slow downloads and problems streaming videos online?

is anyone with an iPhone 6+ experiencing slow download and slow video streaming online? I have had the iPhone 6 Plus and I've been experiencing my app is downloading a lot slower and being unable to stream videos online

I hope someone from Apple is monitoring this site. Three days apps will not update, iOS8.0. Support told me to update to iOS8.02. Can't do that over WIFI or Cell network. Supports tells me have to link to iTUNES and do this. That takes three trys. Did that. Apps still not updating. Read online that resetting network settings will help. Did that App's hanging and not updating.
Apple how does this happen. Night before iOS8.0 release you pull things because of some security issue. Then you have iOS8.01 fiasco and now this. Can someone get this right. We use these things for more than just phones now. FIX IT
iPhone 6 Plus, iOS 8

HD needs repair but only get a looping Restart with a Leopard DVD and USBHD

Ok here are my specs
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.0073.B06
SMC Version (system): 1.32f8
Ok so here is a quick a dirty break down.
Computer has been acting Programs freezing and CPU slowing down.
I ran Verify Disk in Disk Utilities and it said I need to repair Disk.
After a day of head aches I am finally asking for help.
So here is the problem on my old powerbook pro I could just load in Target Mode and repair with tech tool or disk warrior but alas my macbook has no firewire.
So just incase of emergancy's I have a thumbdrive with a live 10.5.3 and all my disk utilities. I've used it on my wifes older Intel Macbook Pro 17" and it works fine.
Today though when i restart hold down the option key "alt" and select the drive my macbook restarts acts like its going to load and the restarts again. This restart loop will go on as long as I let it.
Ok so usb drives can be problematic. Surely starting to the OS X Retail DVD with 10.5.4 and running disk utilities will work. Nope still get the endless restart loop when I've loaded the install dvd and restart with command "c" as well I get the same response if I select it after holding the option key.
Now my hard drive won't even start up either unless I boot in single user mode.
I am lost.
HELP Please.

Have you tried booting into safeboot (safemode)? You may want to try resetting your PRAM and or SMC. Another thing you might try is to plug the thumbdrive in the other USB port.
If you could get an external USB drive with osx on it you could try booting from it.
Apple sure did screw up not putting firewire on that Macbook, my wife has one and I just can't get over it. Sure can make it hard to troubleshoot.

I recently have reset my ipod touch 4g with new apple id and cannot download Facebook,Skype or any app that reqires ios7 or later

I recently have reset my ipod touch 4g with a new apple id and cannot download Facebook,Skype or any app that reqires ios7 or later but ipod 4g can only have ios 6.1.6

Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

HT1349 I have registered with my local library and can download books. But these are not being shown in ITunes, the Library does not show 'audiobooks'. I have an ipod 6G. can anyone help please?

I have recently purchased (from the States) an ipod nano 6th generation. I belong to a local library and can download books from the audiobooks online section. Problem is, my iPod when synced to iTunes, does not show Library as a category and audiobooks. For some reason, it is allowing me to download the books to my iPod, but I am unable to delete them from the iPod, and also, it is giving an echo (I think somehow it is downloading twice which is giving an echo effect). Not sure what is going on, but if anyone can advise me on this I would be very grateful.

Hello mrsbonniesue
If you have an issue with the audiobook showing up in music, check to see if those tracks are labeled as audio books or music. The article below will explained as well as I have highlighted the main portion for changing that information.
iTunes 11 for Windows: Edit song and CD information
http://support.apple.com/kb/PH12360
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook
Regards,
-Norm G.

Getting weird adobe pop-up with foreign language characters and no download

For the last week and change, it seems every time I have been prom,ptsd to download something from done reader, when I click on the "trust website", instead of the page and download opening up, I get an Adobe pop-up with completely foreign language (several different, it looks like) characters, and nothing to click on, and no download. I'm on a Mac, version 10.8.5, on Safari. What gives?????
Cathy

Thank you for the screenshot. The text in the message says
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement then quit and relaunch the browser.
So all you need to do is to open the Adobe Reader app, accept the EULA, then restart your browser.
I don't know why this message is displayed in Japanese, but I have seen similar reports in this forum for the latest Adobe Reader on Mac.

HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

When I click the View option to view a document on my insurance website, I only get a blank screen with words Mozilla Firefox, and below it, "Search Bookmarks and History" in the upper left corner of the screen.

This also happened at a bookseller's website, when I clicked on the photo of a book to enlarge it. Instead of showing me an enlargement, it took me to the same blank screen with the title bar, "Mozilla Firefox", and below it another bar with the words "Search Bookmarks and History," both at the top left of the screen. This has happened repeatedly at the two websites I have mentioned. When I went to the same sites using Internet Explorer, the error didn't occur. I did a Microsoft system restore for a previous restore point, but it still did not eliminate this glitch.

Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* New Old Menu: https://addons.mozilla.org/firefox/addon/new-old-menu/
* Personal Menu (Personal Firefox Button): https://addons.mozilla.org/firefox/addon/personal-menu/

Mini is only booting to white screen with a file folder and ? flashing

Just bought a mac mini from a friend who reinstalled the os. It is booting to a white screen with a flashing file folder with a ? in the centre. I am using a wireless mac keyboard and mouse, change the batteries in the keyboard (just in case)........WHAT NOW????????

Before acquiring a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after acquiring the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

My ipad is now only showing a black screen with the apple icon and doesn't appear to be charging despite being on the AC adapter all day

My ipad had an icon on it after being on the charger all night that indicated it needed to be plugged into itunes. I did this, and then it said it was going to do a restore, I confirmed I was ok and then left it on the computer all day and now the best I can do is get the apple icon on a blank screen. It occassionally changes to show that it has no battery and then goes back to the apple icon. How can I restore it? Any other ideas?

(A) Charge your battery
(B)Try and force iPad into Recovery Mode:
1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
2. Connect USB cable to computer, leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Problem with severe connection fail and slow inter...

Havin problem with several automatic disconnection, slow internet and cant get inside online bt repair centre coz its sayin - this no is not provided by bt business...
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 2 days, 06:57:44
Downstream: 1.122 Mbps
Upstream: 80 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 4.0 dB / 7.2 dB
Line attenuation (Down/Up): 65.0 dB / 34.6 dB
Output power (Down/Up): 19.1 dBm / 10.0 dBm
FEC Events (Down/Up): 9019906 / 503
CRC Events (Down/Up): 656 / 131
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 5492 / 23
Error Seconds (Local/Remote): 62 / 33

as you are a business user you need to post on the business forum https://business.forums.bt.com/
this forum is for residential customer
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hierarchical ALV list with control of printout and Excel download

Hello everybody,
i have to write a program, that has to generate a hierarchical master/client list. The list should
have the same functionality, that a standard ALV Grid
offers (sorting, grouping, OLE export to Excel). The printout must show a new sheet for every master group.
ALV grid does not allow to display hierarchical lists. The ALV hierarchical list and blocklist view switches to
text mode with no "single click Excel activation". I have tried to implement the &XXL ok_code, but in text mode, there is no chance to activate this single-table functionality.
Another possibility seems to be ALV tree, but there is no
possibility to control the printout (new sheet at group level) and the given practice, to load child nodes at selection, is not acceptable for my kind of program (all childs have to be expanded and the printout must contain a dialog to print i.e. a "from to group" selection).
Does anyone have an idea, to solve this problem in an easy object oriented way? my only thought at this time is, to use a standard ABAP list and to integrate Excel via document office integration. This gives me the fullcontrol about printout and export, but it needs far more time then ALV.
Another possibility may be, to develop a custom control, based on VS with Flexgrid, Singray or ComponentOne tools, but ich have to go as near as possible to SAP standard, without using 3rd party programming systems or controls.
I'm glad about tip's!
Greets from germany
Jens

Jens,
Take a look at this for ideas:
REPORT Zsandbox_prog .
INCLUDE OLE2INCL.
field-symbols: <Val> type any.
data: row_cnt type i.
types: begin of t_Excel,
          Material_Info(20),
          Sugg_Price(20),
          Cost(20),
          Comments(100),
        end of t_Excel.
data: r_Excel type t_Excel.
data: i_Excel type table of t_Excel with header line.
constants: xlCenter type i value '-4108',
           xlBottom type i value '-4107',
           xlLeft   type i value '-4131',
           xlRight type i value '-4152'.
constants: xlContinuous type i value '1',
           xlInsideVertical type i value '11',
           xlThin type i value '2',
           xlLandscape type i value '2',
           xlPortrait type i value '1',
           xlLetter type i value '1',
           xlLegal type i value '5',
           xlThick type i value '4',
           xlNone type i value '-4142',
           xlAutomatic type i value '-4105'.
DATA: hExcel TYPE OLE2_OBJECT,      " Excel object
      hWorkBooks TYPE OLE2_OBJECT, " list of workbooks
      hWorkbook TYPE OLE2_OBJECT,   " workbook
      hSheet TYPE OLE2_OBJECT,      " worksheet object
      hRange TYPE OLE2_OBJECT,      " range object
      hRange2 TYPE OLE2_OBJECT,      " range object
      hBorders TYPE OLE2_OBJECT,    " Border object
      hInterior TYPE OLE2_OBJECT,   " interior object - for coloring
      hColumn TYPE OLE2_OBJECT,     "column
      hCell TYPE OLE2_OBJECT,       " cell
      hFont TYPE OLE2_OBJECT,       " font
      hSelected TYPE OLE2_OBJECT,   " range object
      hPicture TYPE OLE2_OBJECT,    "picture object
      hLogo TYPE OLE2_OBJECT.       "Logo object
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN skip 1.
parameter: wraptext as checkbox.
SELECTION-SCREEN END OF BLOCK b1.
row_cnt = 1.
Perform Build_Dummy_Vals.
Perform Start_Excel.
Perform Build_Header_Line using row_cnt.
Perform Pass_Records using row_cnt.
Perform Release_Excel.
FORM Build_Dummy_Vals .
data: matnum(5) type n.
data: baseprice(3) type n.
do 5 times.
    matnum = matnum + 50.
    clear r_Excel.
    concatenate 'Material ' matnum into r_Excel-material_info
      separated by space.
    r_excel-Sugg_Price = baseprice * matnum.
    r_excel-Cost = ( baseprice * matnum ) / 2.
    concatenate 'Comments for Material ' matnum into r_excel-Comments
      separated by space.
    append r_excel to i_Excel.
enddo.
ENDFORM.                    " Build_Dummy_Vals
Form Start_Excel.
CREATE OBJECT hExcel 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
get list of workbooks, initially empty
CALL METHOD OF hExcel 'Workbooks' = hWorkbooks.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF hWorkbooks 'Add' = hWorkbook.
PERFORM ERR_HDL.
Get Worksheet object.
get property of hWorkbook 'ActiveSheet' = hSheet.
EndForm.
FORM Build_Header_Line using p_row_cnt.
data: l_range(30).
data: row_start(10).
PERFORM Fill_The_Cell USING p_row_cnt 1 1 'Material'.
PERFORM Fill_The_Cell USING p_row_cnt 2 1 'Suggested Price'.
PERFORM Fill_The_Cell USING p_row_cnt 3 1 'Cost'.
PERFORM Fill_The_Cell USING p_row_cnt 4 1 'Comments'.
Perform Format_Column using 1 15 xlCenter ' ' xlCenter 0.
Perform Format_Column using 2 10 xlCenter ' ' xlCenter 1.
Perform Format_Column using 3 35 xlCenter ' ' xlCenter 0.
if WrapText = 'X'.
    Perform Format_Column using 4 35 xlLeft ' ' xlCenter 1.
else.
    Perform Format_Column using 4 100 xlLeft ' ' xlCenter 0.
endif.
Build the range object.
row_start = p_row_cnt.
concatenate 'A' row_start ':D' row_start into l_range.
condense l_range no-gaps.
Set row color to yellow.
CALL METHOD OF hExcel 'RANGE' = hRange EXPORTING #1 = l_range.
call method of hRange 'Interior' = hInterior.
set property of hInterior 'ColorIndex' = 6. "yellow
p_row_cnt = p_row_cnt + 1.
ENDFORM.                    " Build_Header_Line
FORM Format_Column USING    p_ColNum
                             p_ColWidth
                             p_ColHAlign
                             p_ColFormat
                             p_ColVAlign
                             p_WrapText.
CALL METHOD OF hExcel 'COLUMNS' = hColumn
    EXPORTING #1 = p_ColNum .           "column number
SET PROPERTY OF hColumn 'HorizontalAlignment' = p_ColHAlign.
SET PROPERTY OF hColumn 'VerticalAlignment' = p_ColVAlign.
SET PROPERTY OF hColumn 'ColumnWidth' = p_ColWidth.
SET PROPERTY OF hColumn 'WrapText' = p_WrapText.
ENDFORM.                    " Format_Column
Form Pass_Records using p_row_cnt.
data: col_cnt type i.
data: l_range(30).
data: row_start(10).
col_cnt = 1.
*Pass the internal table values to the spreadsheet.
loop at i_Excel into r_Excel.
    do 4 times.
      assign component sy-index of STRUCTURE r_excel TO <Val>.
      PERFORM Fill_The_Cell USING p_row_cnt col_cnt 0 <Val>.
      col_cnt = col_cnt + 1.      "increment column
    enddo.
Build the range object.
    row_start = p_row_cnt.
    concatenate 'A' row_start ':D' row_start into l_range.
    condense l_range no-gaps.
Set row color to yellow.
    CALL METHOD OF hExcel 'RANGE' = hRange EXPORTING #1 = l_range.
    call method of hRange 'Interior' = hInterior.
    set property of hInterior 'ColorIndex' = 7. "yellow
    p_row_cnt = p_row_cnt + 1.    "increment row
    col_cnt = 1.                  "reset column to A (ie. col 1)
endloop.
EndForm.
FORM Release_Excel .
SET PROPERTY OF hExcel 'Visible' = 1.
FREE OBJECT hExcel.
PERFORM ERR_HDL.
ENDFORM.                    " Release_Excel
      FORM Fill_The_Cell                                            *
   Sets cell at coordinates i,j to value val boldtype bold          *
   BOLD --> 1 = true, set bold ON    0 = false, set bold OFF
FORM Fill_The_Cell USING I J BOLD TheValue.
CALL METHOD OF hExcel 'Cells' = hCell EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF hCell 'Value' = TheValue.
PERFORM ERR_HDL.
GET PROPERTY OF hCell 'Font' = hFont.
PERFORM ERR_HDL.
SET PROPERTY OF hFont 'Bold' = BOLD.
PERFORM ERR_HDL.
ENDFORM.
FORM ERR_HDL.
IF SY-SUBRC <> 0.
    message i000(zz) with 'OLE Automation error: ' SY-SUBRC.
    exit.
ENDIF.
ENDFORM.                    " ERR_HDL

For those with pixel rendering issues and slowness issues

For anyone who doesnt know these little details when designing in Catalyst, I thought I would share and hopefully ease some peoples frustrations. Lets kick off with pixel issues.
You have either vector, raster, or components that are either: not aligning with everything else around it, even though it has the same X/Y value, the rounded corners of a rectangle vector object are distorted, or anything else you have experienced with pixel distortion or pixels just not lining up properly. Here is the issue. When you drag and drop an object from the library, wireframe components, or draw a new shape, it can have a decimal level pixel value. It does not say this in the property inspector though. So you may have a rectangle at a listed X/Y of 10,15 but it could actually be 10.3, 14.9. To fix this you have to type in a new value of at least 1 number higher or lower. Deleting the value and typing the same number in doesnt do anything. Neither does moving it with the arrow keys in hopes of it moving it to a whole pixel value. The arrow keys move by 1 pixel (or 10 if holding down shift). This should take care of most of your problems.
Now you may still have problems with the corners of rounded rectangles if you converted it to an Optimized Vector Graphics. For you Flash Pro users, from what I can tell, using "Optimize Vector Graphics" is basically the same as (in Flash) converting a vector shape into a MovieClip and in the property inspector, checking the "Cache as Bitmap" box. That option has Flash create a bitmap version of the vector shape so that it will not be re-drawn every frame, which is what the Flash player does with vector objects. So because it is converting your vector into raster, it kinda has issues with rounded corners when you have a stroke on the shape and pretty much only if you have a stroke. If you take the stroke off, and use Optimize Vector Graphics, you shouldn't have that problem anymore. But what if you needed that stroke? Simple, duplicate that shape, change its fill color to what you want the "stroke" color to be, increase its size by 2 pixels on the width and height for every number of thickness that you wanted with the stroke, and then set the X/Y of the "stroke" rectangle to a pixels less for whatever the "thickness" of your stroke is.
Example:
Rectangle - width:20, height:10, desired stroke thickness:2, X:10, Y:10
Rectangle Stroke - width: 24, height:14, X:8, Y:8
Rectangle - width:100, height:30, desired stroke thickness:1, X:15, Y:27
Rectangle Stroke - width:102, height:32, X:14, Y:26
It wont look perfect but its pretty close if you do this and then draw a rectangle beside it with a real stroke. And if you still want to use Optimize Vector Graphics on it, just group the two rectangles together and then use Optimize on the group and no more distorted corners. This also applies to vector shapes in Flash Pro.
Lastly to talk about the slowness of Catalyst. You may or may not have read the posts from Adobe employees, but I can tell you that having fewer states helps with the responsiveness of it, but so does using the Optimize Vector Graphics as much as possible. I am working in a large scale project, and just from me converting all my vector background shapes, which was around 13 used across 6 main states, it helped significantly with Catalyst being more responsive for me.
Hoped this long post helped some people with any similar issues you might be having.

I noticed with my Charge phone that when I get a call the FIRST ring is highly muted (quite soft) and then all rings after that are full volume.
I wish that even the first ring was load (full volume) but I accept the fact that that is how GB 2.3.6 works. Anyone know how to change this?
Ya can't win 'em all.
JerryF

E1200 - only 54 mbps Wi-FI with 801.11n notebook and slow download

Similar Messages

Maybe you are looking for