E1200 Ports not open on DMZ mode

I've DMZ'd my computer using the the E1200's Web Browser Config screen (192.168.1.1) yet when I try to test the ports not a single one is open.
I've used this test to see if they were open:
http://www.whatsmyip.org/ports/p2p/
And almost none of them were. Is there any issue that could be causing this?
Also when I try to open a single port the site says it times out.
Opening single ports didn't help either.
I've also tried to DMZ via the IP and the MAC address of my PC and still no luck.

As you can see the IP address on the internet port of the E1200 is not a public one. It's not the one you see on whatismyip.com or similar.
Your "modem" is also a router. The public IP address is on that modem. Any incoming connection from the internet ends at the modem. Thus, any port forwarding on the E1200 is fully ineffective as you don't have any matching port forwarding on your modem.
Best solution: set your modem into "bridge" mode to turn it into a real modem. In bridge mode you have to configure the E1200 for your internet connection (DHCP or PPPoE depending on your ISP). Then the E1200 gets the public IP address and port forwarding should work.

Similar Messages

I have no navigation bar and firefox will not open in safe mode to reset to default config. Reinstalling doesn't work. Any help please.

I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
== This happened ==
Every time Firefox opened
== I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

File Upload applet not opening in Query Mode

File Upload Applet is opening in Query Mode in Siebel 7.5, where as in Siebel 7.8 its not opening in Query Mode.
Should anything be changed in CFG? or siebel restricted this?

Hi,
There is a property called "Auto Query Mode" in the applet. Check whether this has been set to "New Query" in 7.5. If so the applet will be opening in Query Mode automatically. If this property is blank, in 7.8, the applet will not be opening in Query mode. Check and let me know.
Regards,
Joseph

Firefox crashes when opening and will not open in safe mode

Recently FF3 started crashing when opening. It will not open in safe mode as well. I have uninstalled it including deleting the install folder and profile folders as well as registry entries. Upon reinstallation is will still not launch in any mode.
I have scanned for malware with several scanners and that has not found anything.
Here is the crash report cause - nsCOMPtr_base::~nsCOMPtr_base() | nsDocShell::SetupNewViewer(nsIContentViewer*)
Anti-virus is Trend Micro Worry Free for Business. I uninstalled it and Firefox and then reinstalled only Firefox and still get the same thing.
I do not know what to try next.

Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
BuildID: 20100401064631
CrashTime: 1274739594
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1274097386
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 525200
StartupTime: 1274739562
Theme: classic/1.0
Throttleable: 1
URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Vendor: Mozilla
Version: 3.6.3
This report also contains technical information about the state of the application when it crashed.

Can not open in safe mode

I can not open in safe mode. It launches Utilities instead.
I tried to reinstall Mavericks but it stalled for over an hour.
I found a loose kernel in my HD fielder and deleted it.
Anny ideas? Thanks.
Allan

Using Safe Mode. What happens with a normal boot - same thing? If so then your startup volume needs to be reformatted and you need to reinstall OS X.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.
This should install the version of OS X that you had installed.

Why does MainStage not open in 32bit mode?

why does MainStage not open in 32bit mode?
When it is set to open in 32bits, and not 64bits.
Thank you.

This is the icon in pse 8 your pressing for bridge?
Yes, Applications from the Go menu in Finder and you don't see a folder called Adobe Bridge CS4?
When you have the Cookie Cutter Tool selected and click on the little double arrows for the flyout
menu to select the different shape librarys, you don't see anything listed?

10.8.2 Server: Ports not open

Hello
I try to configure a ML Server and want it to configured aas a mail server. So I configured DNS names, mail domains, Users and so on.
Now when I try to configure a mail client to receive mails via IMAP the server won't respond. So I tested all open ports on/to the server. Now I noticed that port 110 and 143 is not open. So any 1 knows how to open these ports in ML?
OS X 10.8.2 (Build 12C54) and Server 2.1.1 (Build 12S365)
Many thanks for any informations.
Dominique

If you're connecting from outside your network, the ports have to be forwarded on your router. Note also that some ISP's block incoming traffic on well-known ports unless you have a business account.

Will not open in normal mode

Firefox will crash every time I try to open it. It then opens in safe mode. I have reset it and restarted the computer and it still crashes. I have sent over 127 crash reports in December alone. I have tried to reinstall but it stops and says it cannot continue to install. None of my programs that use the internet will open I get a "stopped working" or Launcher stopped working message. (PCMatic, Quicken, Malewarebytes, Superfast PC) and many other programs that I've downloaded and uninstalled after they will not load. Nothing seems to correct the problem
Short of doing a clean install of windows and starting all over again I do not know what to try next.
Betty

If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Adobe digital edition 2.0 not openned in noraml mode

Hello All,
I am using windows xp sp-2 and i installed the adobe digital edition 2.0 the software requires the below application
1. windows installer 3.1
2 Dot net frame work 3.5 Sp1
we have installed the above software in my system but when i open the adobe digital edition 2.0 means it cannot be openned in normal. but safe mode (with out networking) adobe digital editions open and woking good .....noraml mode it cannot be openned ........
please give me the instrcution ........to resolve the problem ...............
Thanks,
Mano.A

Hello Sjpt
In windows xp serivce pack-2, ADE 2.0 is working perfectly for few days only, but after few days ADE 2.0 is not opening. I dont know why it is not opening? Can anyone tell me reason behind this?
If RUN>>MSCONFIG>GENERAL>DIAGNOSTIC STARTUP - LOAD BASIC DEVICES AND SERVICE ONLY > APPLY > OK and restarting the system then the ADE 2.0 is opening.
If RUN>> MSCONFIG>GENERAL>NORMAL STARTUP - LOAD ALL DEVICE DRIVERS AND SERVICES > APPLY > OK and restarting the system then the ADE 2.0 is NOT opening. As you people are well aware that we cannot use the diagnostic startup since it will allow basic service and devices only.
I have tried the following methods to overcome this issue (from internet)
1. Uninstall Adobe Digital Editions using one of these two methods:
Start > Programs > Adobe > Adobe Digital Editions > Uninstall
Start > Settings > Control Panel > Add Remove Programs
2. Initiate Uninstall
3. In order to remove all remnants of Adobe Digital Editions / Adobe Adept from the machine a "Registry Edit" will need to be performed:
Start > Run > Regedit
4. Search for HKEY_CURRENT_USER > Software > Adobe > Adept and Delete the full "Adept" folder
5. Remove only the structures that are under the "SOFTWARE" extensions. This will remove the Adobe ID / License and Activation Keys
6. Clear any outstanding tasks that may be associated to Adobe Digital Editions downloads
C:\data\my digital editions
C:\my documents\my digital editions
7. Delete any documents within these folders:
Restore > Tasks
Restore > Failed
8. Re-install Adobe Digital Editions
9. I have updated Windows xp from SP2 to SP3
The above methods didn't helped me to solve this issue. Then, i have used DIAGNOSTIC STARTUP and safe mode, it was opened, but not in normal user mode.
Thanks,
Mano.A

IE 11 does not open in desktop mode on Server 2012 R2

We've built our first 2012 R2 servers. IE11 will open in metro if it's not set for desktop mode. It will fail in desktop mode. It will however open if you go to an admin command prompt, go to c:\program files\internet explorer and run iexplore.exe. When
trying desktop mode in the event app logs, event ID 102, task category (101) appears with the message "the program iexplore.exe version 11.0.9600.16518 stopped interacting with Windows and was closed". I have tried everything I've found using Google:
reset, use software rendering, etc and nothing helped. Any suggestions?
Ben JohnsonWY

Hi Ben,
Your issue can occur if the IE setting is incorrect, or the temp folder need clear up. If you are not choose Always in Internet Explorer on the desktop, IE may use Metro mode. Also disable enhanced protected mode for a test.
This issue may cause due to some registry problems occurred.
To resolve this issue, follow the below steps:
a. Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
b. Type regsvr32 actxprxy.dll in the Open box, and then click OK.
c. If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
d. Restart the Internet Explorer
If the above given steps also did not help then try to disable the antivirus and firewall and try installing Internet Explorer 11 manually.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Downloaded latest Firefox version. Firefox will not open in safe mode. Consistent crash report.

Responded to upgrade notice for Firefox 11. Downloaded and installed following directions. Message about RealPlayer add in needing manual update. No other errors with install. Displays crash reporter when opening. In safe mode, also displays crash reporter. Will not open. Unable to do anything in Firefox. This note is written in IE.

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes
* https://support.mozilla.org/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.org/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

Error 404, website not found. Uninstalled, installed, firewall fixed to allow programs. Will not open in safe mode.

Google chrome works fine, but Firefox gets an error code 404. Windows Firewall is configured to allow the program, I have uninstalled/reinstalled, and it won't open, not even in safe mode. Still a 404 code. The same thing is happening to Safari. I can't fix settings in Firefox if it doesn't open. Any other suggestions?

Once Firefox is open, if you press Ctrl+n to open a new window, does it show the same error or does it work and show your home page?
'''No! I get the same error.''' Check your home page setting as the URL may be corrupted. These articles should point the way:
* [[Startup, home page and download settings]]
* [[How to set the home page]]
Any improvement?
'''Yes! That works.''' Check for a hijacked shortcut. Here's how:
Right-click your Firefox shortcut/icon > Properties > Shortcut tab. The "Target" for 32-bit Windows 7 should be this (no more, no less):
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
If anything else follows that, remove it. Save your change and test the icon again.

Itunes will not open in recovery mode

My ipad was corrupted and froze so I tried to use recovery mode to restore. However, iTunes does not open after connecting ipad to PC. I connect the cable while pressing home button and when the iTunes logo as well as the cable picture is on then try to start iTunes but it does not start. I can see in task manager that iTunes is an active process but it will not start on pc. I can start iTunes when device is not connected. When I connect ipad while iTunes is on, it does not recognize the device. I have removed and re-installed iTunes twice already. Please help.

Reload the current iTunes onto your computer from
http://www.apple.com/itunes/download

Cannot Tnsping, Telnet to DB on Linux 3 Sever - Ports not open

I have installed 10g DB server on Linux 3. The DB is running properly. However when I do a TNSPING/Telnet from a windows client I am unable to connect. I can ping the server from the client and vice versa.
The following are the results:
sqlnet.ora file on the client:
# sqlnet.ora Network Configuration File: C:\oracle\product\10.1.0\db\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora file on the client:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\db\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
infr2 =
(description =
(address_list = (address = (protocol = tcp)(host = 192.168.0.102)(port = 1521)))
(connect_data = (sid = infr2)))
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SERVICE_NAME = infr2)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENER is running on the server.
PING RESULTS FROM SERVER TO CLIENT: Successful
[root@infr2 etc]#ping 192.168.0.100
PING 192.168.0.100 (192.168.0.100) 56(84) bytes of data.
64 bytes from 192.168.0.100: icmp_seq=0 tt1=128 time=0.279ms
6 packets transmitted, 6 recieved, 0% packet loss, time 5013ms
PING RESULTS FROM CLIENT TO SERVER - Successful
C:\Documents and Settings\natik>ping 192.168.0.102
Pinging 192.168.0.102 with 32 bytes of data:
Reply from 192.168.0.102: bytes=32 time<1ms TTL=64
Reply from 192.168.0.102: bytes=32 time<1ms TTL=64
Reply from 192.168.0.102: bytes=32 time<1ms TTL=64
Reply from 192.168.0.102: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.0.102:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
TNSPING Result â Fail
C:\Documents and Settings\natik>tnsping infr2
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 07-NOV-2
004 10:18:42
Copyright Â© 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.1.0\db\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (description = (address_list = (address = (protocol = tcp)
(host = 192.168.0.102)(port = 1521))) (connect_data = (sid = infr2)))
TNS-12560: TNSprotocol adapter error
Telnet result - Fail
On Telneting to see if the port is open I get:
C:\WINDOWS\system32>telnet infr2.localdomain.com 1521
Connecting To infr2.localdomain.com...Could not open connection to the host, on port 1521: Connect failed
I have flushed the rules from the iptables. There are no rules set right now, but still getting failure.
The TNSPING and TELNET is not getting through any ideas. Seems like that the port 1521 is blocked. How do I open it.?
Thanks.

Is there a firewall between client and server? Unfortunately you don't tell us , which Windows version you are using. If it is Windows XP SP2 , by default Windows integrated firewall is activated. But this shouldn't be a problem in your case, because you are using Windows as a client.

ChooseFromList on Grid not opening in Find mode

I have added a system CFL (i.e. Business Partner) to a Grid on a custom form. The CFL does not open when the form is in Find mode, but it does open when the form is in Add or Update mode. Is this a bug?
Example C# Code
                oColumn.Type = SAPbouiCOM.BoGridColumnType.gct_EditText;
                oEditTextColumn = (SAPbouiCOM.EditTextColumn)oColumn;
                oColumn.Editable = true;
                oEditTextColumn.ChooseFromListUID = CFL_CARD_CODE_UID;
                oEditTextColumn.ChooseFromListAlias = "CardCode";
                oColumn.TitleObject.Caption = "Distribution Center (=)";

Hello Catherine,
It is a system behavior, not a bug. In find mode, the end user should enter the text by manual for searching. You can refer to Sales Order, switch to find mode, the CFL for BP won't list the BPs.
Kind Regards
-Yatsea

E1200 Ports not open on DMZ mode

Similar Messages

Maybe you are looking for