E1200 router won't let linux box with static IP access the internet?

I don't believe the linux box is the problem. I can ping it, I can access it through SSH,etc
For the like of me I can't figure out how to get it to access the net.
This is necessary for remote access.
I tried putting the IP address outside the DHCP address pool and setting the IP in reserved IP associated with the MAC address under basic setup. I find this really strange.
Whats the proper way of doing this?

Hi. Are those static IP addresses provided to you by your ISP?
Here's the way to do: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=91dbbf0c772e48b9bebee106abb837c9_3979.xml&pid=80&r...
In the picture below, I placed a yellow mark on the field where you might have typed in your static IP. It should be where it says "Internet Setup". Just click on the drop down arrow and select "Static IP". Just follow the link I provided above and it should be good to go.

Similar Messages

  • Netgear router won't let me connect with a network my new roomates use

    I have had this problem before connecting to wireless networks, although not all of them. I just moved in with a friend who gave me the network name and password. Although my powerbook G4 sees her network, it shows an error message when i try to connect with the password. She set up the Netgear (WGT624 v3) router using her DELL and everyone else in the house (using PC's) don't have this problem. I'm wondering if we need to go through what she has set up on her computer, because I must have tried everything on mine! Does anyone know how to solve this problem?

    Hi tracie,
    thats OK I know how hard wi-fi is to setup, I've spent many hours in the past trying to figure out how to set mine up! Its usually the simplest of things.
    Your MAC address or Airport ID (as Apple call it) is a string of a series of 6 two digit numbers/letters separated by a colon e.g. 00:2b:35:18:af:32
    This identifies your Airport card on a network & your address can be viewed in System Pref.s/Network, then from the drop down "Show" menu choose "Airport" & then click the Airport tab that appears in the row of buttons & you should see your Airport card's MAC address (Airport ID). But if you cant find that option don't worry about it.
    While your in Network Sys Pref click show port config. & drag the Airport entry to the top of the list.
    If you do try WEP again, go to router's
    Wireless Settings > Wireless network
    & insure the Mode is set to "g and b" just incase.
    Then > Security Options & click WEP.
    Then in > Security Encryption > Authentication type
    set to Shared key
    Also > Encryption Strength
    set 128bit
    After that go down to > Security Encryption (WEP) Key
    in Passphrase enter your new password & click the Generate button on the right - this will bring up your HEX key in the checked "Key" box below.
    write this new generated key down & click Apply & log out.
    Now on your PB open the Airport network entry window, change top box from "WEP Password" to "WEP 40/128-bit HEX"
    Then enter the generated key you wrote down into the box below, & click ok/join.
    Keep 'em crossed & you "should" join.

  • My Game Center won't work on my iPod touch 2nd Gen. It let me sign up but it won't load any of my games and won't let me play with my friends. I don't know why? Any help?

    My ipod touch 2nd Gen let me sign up to game center but it won't load any of my games and won't let me play with my friend. I don't know if it's like this because it is old and slow, or what. Please help me figure this out. Thank You.

    Try:
    - Sign out of Game Center and sign back in
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • My phone has the correct AppleID in the in settings section but asks me to login with one that isn't mine.  I deleted the ID from my itunes but it still won't let me login with mine. How do I get my iPhone on the same page?

    My iphone4 has the correct Apple ID in the information settings section and asks me to login to my ID most of the time but when I try to update my apps, it asks me to login with an ID that isn't mine.  I deleted the wrong ID from my itunes but it still won't let me login with my own ID to update apps.  How do I get my iphone on the same page?

    How did you obtain these apps? All apps are DRM protected & tied forever to the account used to originally obtain them. They cannot be transferred to another Apple ID(account), nor can they be updated using any Apple ID other than the one that was used to originally obtain them.

  • HT4539 I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I down

    I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I downloadeder pro but I don't kno way to do?

    Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

  • Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

    Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

    You must be signed into the Apple Store with your Apple ID or it won't work.
    and
    How to deal with a 100 Store Error:
    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing
    If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here;
    ~/Library/Caches/com.apple.appstore/Cache.db
    Click Go
    Move the Cache.db file to the Trash.
    Now here:
    ~/Library/Preferences/
    Click Go
    Move these files from the Preferences folder to the Trash.
    com.apple.appstore.plist
    com.apple.storeagent.pllist
    Now here:
    ~/Library/Cookies
    Click Go
    Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Empty the Trash, try the App Store.

  • Is there a way to install 10G on a Linux box with less than 1G of Ram?

    Hi All,
    This maybe a stupid question, but I'm going to ask anyway.
    I've got a Linux box with 256 Ram running CentOS. I can up it to 512, but playing with the 10G R2 Enterprise install, it complains about it not having 1G of ram needed for install. So is 1G the minium ram for Oracle 10G R2 or is there a way to install it on a box with less ram? This is not a production environment, I'm just learning and testing.
    Also, what is the min ram requirements for the Express version?
    Thanks,
    Mike

    Hi All,
    This maybe a stupid question, but I'm going to
    ask anyway.
    I've got a Linux box with 256 Ram running CentOS. I
    can up it to 512, but playing with the 10G R2
    Enterprise install, it complains about it not having
    1G of ram needed for install. So is 1G the minium ram
    for Oracle 10G R2 or is there a way to install it on
    a box with less ram? This is not a production
    environment, I'm just learning and testing.I'll leave that to people with a recent encounter of the 10g2 installation process.
    Also, what is the min ram requirements for the
    Express version?256 MB as far as I remember.
    C.

  • E1200 Router won't connect to Ipad

    We have just installed the E1200 wireless router.  We are able to access the internet from our home computers, however we cannot get the IPAD connected.  When we try to find our wireless network to connect to it doesn't display yet our we can still see our neighbors wireless networks.  Please help!

    In reference to your post where you cannot see the wireless network on your I-pad, you can try the following:-
    a) Try to change the channel on your linksys router to either 1,3,6,9 or 11. The following link shows how to change the channel http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=4009
    b) Try to change the network name (SSID) of the router. The following link shows how to change the network name (SSID) http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4037

  • I updated my IPad and now I can't download any apps and it won't let me log onto iTunes , I have the same account I use on my iPhone which is synced and that works fine

    Wanting some help , since I updated my IPad I can no longer download apps or movies on my iPad , it won't even let me sign I. .
    I also have an iPhone which is synced and I updated them both the same day and I have no problems with the phone only the iPad . Any help would be appreciated . Thanks

    Hello there, Gwald.
    The following Knowledge Base article offers some great recommendations for troubleshooting your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Specific to iPad are the following:
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • When a website asks me to enter the letter combination shown in the image below, no box letter or box appears. It appears in Internet Exployer and did in earlier version of FF. Am using FF 6.0. Help please

    When a website asks me to enter the letter or number combination shown in the image below, no box letter or box appears. It appears in Internet Explorer and did in earlier version of FF. Am using FF 6.0. Help please

    If images are missing then check that you aren't blocking images from some domains.
    *You can inspect and manage all permissions on the about:permissions page, via the location bar.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images permissions.default.images
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • GarageBand won't let me drag and drop songs into the timeline.

    GarageBand won't let me drag and drop songs into the timeline.  It did before, now all of a sudden it won't... anyone know why?
    I am dragging them from iTunes, and it has never been an issue before.  I have used AAC, MP3, and AIFF before and never had an issue.
    Is there a setting possibly that I need to change?

    Same with me, Lion is a cool OS but the updates iTunes has nothing but problems. I can't even drag song to my desktop. You can try finding the song through iTunes music folder but the song I wanted wasn't there. To get there look at this artical http://support.apple.com/kb/ht1391. to help you find that song.

  • HT5934 My iMac won't let me drag, and drop anything from the desktop to other files on the desktop, or anywhere else.

    My iMac won't let me drag, and drop anything from the desktop to other files on the desktop, or anywhere else.

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • My iPod is connected to my phone by blue tooth but it won't let me send things from one to the other what do I do

    My iPod touch is connected to my phone on Bluetooth but it won't let me sent things from one to the other and y won't adobe flash work I'm confused

    The BT profiles on the iPod only support pairing with headphones, speakers. keyboards and other iDevices via apps mainly for peer-to-per gaming. See:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles
    Regarding Flash, read the following by S Jobs:
    Thoughts on Flash

  • I got an iPad mini from a friend who is now passed away and I'm trying to activate it using my Apple ID but it won't let me because I have to contact the previous owner, what do I do!?

    I got an iPad mini from a friend who is now passed away and I'm trying to activate it using my Apple ID but it won't let me because I have to contact the previous owner, what do I do!?

    Take it, the original purchase receipt, and the friend's death certificate to a physical Apple Store and see what they say.
    (110829)

  • On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • WebLogic Server: 10.3.5.0 - Managed stuck in STARTING

    Hi all. I have a managed stuck in STARTING for like 2 hours, the logs are these: ####<Sep 25, 2013 1:40:42 PM CEST> <Info> <JMS> <XXXXXXXXXXXXX> <ofi-spss-01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kern

  • Project Build Installer Properties Slow to load, (Maximum vi size)

    I have a LabVIEW Project with 450Mbytes of source code, and drivers.  The Project was originality in LabVIEW 2009.  I upgraded to LabVIEW 2011.  Now the Project Build > Installer Properties Menu is about 10x slower than was in LV 2009. I've done a ma

  • Wired vs wireless Mighty Mouse tracking

    Has anyone else found that the wireless Mighty Mouse has different tracking or acceleration compared to the wired version? It feels as if it has some acceleration applied that I can't dial out using USB Overdrive, or that it has a slight dead zone or

  • Golden Gate is not Sync

    Hi, In our production environment we have GoldenGate Implementation. And it has to sync with other 3 servers. Unfortunately it is Sync with 1 Server but others are not Sync. I am checking with ggserr.log file. But it is not having any error messages.

  • Quicktime 7.04 and i Movie

    Does anybody know if this new quicktime 7.04 would export clips to DV Camcorder or not.. Please advice. In the recent 7.03 had a bug that i Moves would not export unless using quicktime 7.01. I was just wondering if Apple fixed this problem. So, let