E1200 v2 - issue: all solid lights - help please

Hi there,
This e1200 v2 was working fine for months and it stops working one day.
Issue:
* all 6 lights are solid green as soon as the power cable is inserted
* no patch cable plug in but lights are solid green
* tried the 30 second reset - still solid green on all six lights from start to finish
* tried the 30/30/30 recovery mode - solid green on all six lights from start to finish with no RJ45 cable plug in
* as soon as the power calbe is inserted, all lights are solid green (none of the lights blink)
* ping fails to 192.168.1.1 (no display on web)
* search for its WiFi is empty
any help on this is greatly appreciated,
Cheers,

Sorry looks like the E1200 isn't recoverable and will have to be replaced.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the Mac, they are all locked. Help, please. Thanks

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!

"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please

Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please
Windows 8.1 OS

Does everything include this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

After updating to latest iOS my iphone 4 is mute, at start the other party couldn't hear me, now I cant hear anything not even the ringing tone. This happens only if make regular calls through my carrier. If use viber all ok. Help please?

After updating to latest iOS my iphone 4 is mute, at start the other party couldn't hear me, now I cant hear anything not even the ringing tone. This happens only if make regular calls through my carrier. If use viber all ok. Help please?

I read on another discussion that sucking air out of the headphone slot works, I tried it and guess what, it worked.......weired....apparently something to do with moisture accumulation....!!!!!!

New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

Raya Alfa wrote:
...there are some that are mp3 and it will be extremely hard to pick them from the lot.
Not true. Select "Kind" as a sort category by right clicking the headings
Then click to sort by Kind
If your Import Settings are for Apple Lossless, AIFF, AAC or whatever the majority of your files are, convert MP3s to that file type.
I've presently got 17,000+ files in my library, and they're ALL MP3 or M4B(Audiobooks). If they weren't when I got them, I converted them. Saves a LOT of hassels with just this type of situation. Besides I have two non Apple MP3 players that WON'T work with other file types besides MP3 so, EVERYTHING I have has to be MP3.

When i try to take a self photo on my itouch 5, the shutter doesn't open and i can't take a picture, sometimes my app wont let me take pictures at all...help please?!

i just recently last month got a new itouch 5th generation ipod touch...recently after i had bought it, i noticed that i can't take self photos on my camera...if i am on the regular app taking a regular shot and try to switch it, it just freezes on me and i cant get it back to normal at all...ill have to restart it and leave it off for a day in order for it to work again....i really need help please in order to figure out what to do and if i should just bring it to apple!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Windows 8, Y55 ideapad continual clicking issue with touchpad. Help please

For some reason, when I tap to click the item I clicked remains actively clicked when I move my hand away from the touchpad. In order to process any action, I need to move my cursor away from the button I'm trying to click.
Interestingly enough I tried to disable tapping to see if it would solve the issue, and tapping continued to work...which is odd. It doesn't have this issue when I click objects with a mouse, only when I use the trackpad. Please help me, I'm confused.

hi BFG9000,
Welcome to Lenovo Community Forums!
You can try Uninstalling the driver of your touchpad from Device Manager, under Mice and other pointing device and make sure to put a check on Delete Driver/software prompt.
Then try Checking the touchpad if it works ok without a driver, If it does then try downloading a driver from synaptics website.
If not then Most likely this is a Hardware concern and you need to contact Lenovo Technical Support for assistance.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audio driver issue??? Help please

I've been experiencing this problem eversince I got this laptop last august.. its a satellite m305d-s4830 4g ram 250g hd amd turion ultra x2 zm-80 2.0ghz proc. My audio playback seem to stutter a lot playing in media player. even videos keep on stuttering from time to time. I have downloaded all the drivers from this page even bios update even the southbridge driver from ati including the latest support for an integrated amd 3100 motherboard. without luck it didn't changed anything so i ignored it.. i used different players for both videos and audio. and they were fine until recently my laptop is experiencing real slow downs so i used the resotre cd.. so its freshly installed like out-of-the-box. its sad because now when i'm multi-tasking while using winamp for music it keeps on stuttering. i've exhausted everything and i'm not successful in figuring out what's wrong help me please... by the way i have vista home premium 64bit for os. thnx

thnx for the reply and im considering of the possibility of the device heating up but im sure its not because of the temp of the proc. however i think i might know the culprit for this.. the issue only happens when i'm using the laptops speakers and if the volume is maxed now if i would plug in a headphones or external speakers perhaps the issue wouldn't happen at all.. what could i possibly do about this one? i know i could get along by plugging in an extra device but i'm still bothered by the issue and hoping to solve it soon.. thnx

My ipod 5 only has backlight no front light help please!!

My ipod touch 5 gen ios7 only has backlight no front light can u please help me solve this issue
PLEASE!!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

R7770 / Win XP pro driver issue - directx not supported help please!

Hi guys sorry to bother you, and for such a long question.
I've just purchased a brand new MSI branded AMD radeon r7770 to replace my nvidia 8800gt graphics card which finally bit the dust last week.
Despite uninstalling the old nVidia drivers, trying the ones that came with the card and downloading and installing the very latest versions from both the AMD and MSI sites, I still cannot get directx to work. At first glance, the drivers look to be installed OK, (the Catalyst Control Center starts up etc) but none of my games run, and the desktop refresh is incredibly slow. KSP's crash log helpfully states that it cannot find the device driver. When I run Dxdiag.exe all the directx diagnostic tags are greyed out and the info box states that the card does not support directx.
The system is pretty ancient but should still be up to the task as it was a well speced gaming PC in its day:
Mboard: Asus P5K3 Deluxe (intel P35 chipset)
CPU: Intel core2duo Q6600 (quad-core)
mem: 4 gig Corsair ddr3 mem.
PSW: 600W
OS: Win XP pro SP3
I'm aware that this is an old PCI-E 1.0 board and the card is designed around PCI-E 3.0, but the computer boots up and starts Windows just fine. Both the Bios and Windows detect the R7770 correctly. (I'd have thought if this was an issue - it wouldn't go past POST at all and begin beeping like crazy!)
To muddy the waters still further, as a experiment, I installed an old radeon card for test (a crappy Sapphire hd 2600 pro PCI-E version), which is about the same age as the rest of the system.
I couldn't find the drivers disk initally, so downloaded the relevant ones from Sapphire and AMD. Got EXACTLY the same problem as above: it looks as the drivers have installed but no Directx support (which is daft as I used to use that card games until I could afford to replace it with the 8800)
I tried everything I could think of for hours (including disabling driver signing security, stopping anti-virus software, trolling through the windows/ inf, System32 and System dirctories to weed out anything ATI - you name it) then miraculously found the old drivers for the HD 2600. Installed them with no probem at all - everything worked just as it should!
So, I looks to me like the XP drivers on the web are now garbage. Anyone else have similar problems or know of a workaround?
I'm not exactly rich so can't afford Win 7 or the dreaded Win 8 (which I loath) or a new PC, which is why i'm soldering on with this dinosaur!
The only thing I haven't done is splat Windows and do a clean install, do you think that'll help? If so why did the old radeon drivers work (win has been cleanly re-installed many a time since I last used that card, so there was no legacy junk lurcking in the windows diectory or it's registry)
Do you think I'd have better luck with NVidia? If so could you kindly recommend an alternative from them? I know an R7770 is a bit OTT for such an old system, but they are dirt cheap at the mo and not much more expensive than much less powerful cards.
Anyone have any thoughts about UBuntu? If it is a driver issue or there is no workaround, I may need to consider this route. Trouble is none of my legacy games will run on Linux and i'm not sure virtualization is available for my mboard.
Anyways, thanks for your time and for any suggestions you might make
Regards
Mike

Hi Flex, thanks for the quick reply and for the advice.
In the end i got it going by changing the boot.ini settings.
They were initially set with the /3GB /fastdetect switch to force the WinXp kernal to run in 1GB, and not take up 2GB as is it's default.
It was set that way to stop a 32bit game (KSP) crashing every 10 minutes or so, through lack of addressable memory.
All I did was simply set the boot.ini back to its default and directx sprung to life. I reset it back to 3GB to make sure it wasn't a fluke and as soon as I did, it killed directx again.
Maybe its a driver issue afterall - probably lack of proper XP support by AMD (This dosen't happen with the old- - 2008 vintage - version 4 ATI radeon drivers.) or perhaps its because the card has twice the memory over my old cards and therefore needs to access a higher portion of I/O allocation than is available in 32bit WinXP.
Its all a bit ironic really as i'm finding the R7770 runs like crap under dirx9 - i'm getting about 30% the frame rate of my old Nvida 8800GT and, as I can't use the 3GB switch anymore, it crashes every 5 mins or whenever I play any resource intensive game.
As the crashes are caused by lack of available address spaces under 32 bit systems, I've bitten the bullet and got 64bit Ubuntu. Got this working in the wee small hours last night - including the R7770 using the AMD catalyst drivers for Linux. Hopefully that will sort things out (and gimmie an excuse to learn a proper OS!)
Wish me luck i can see another "steep learning curve" on the horizon!
Cheers
Mike

IPhone 5 No Service Issue (Connected/Dropped Cellular) Help please :)

Hi Apple Forums!
I have a iPhone 5 (16gb) with Verizon Wireless.
Last week, while at the hair dresser, i was using my iPhone just fine and than boom, no service. I looked outside and noticed it was a little dark and stormy so i assumed weather was messing with my cell service. When the weather cleared up, my phone showed the 5 single bars, but all of them were empty. Not only that, but, my phone went through a cycle of "LTE" "3g" "1X". Confused, i plugged my iDevice into my computer and did a fresh restore. Set the phone up as a new iPhone (mainly because i don't have anything important on my phone). As soon i was on the welcome to my new iPhone screen, i noticed in the top corner it already said no service. At this point i concluded that my SIM card might be going bad. The next morning i drove to Verizon and they told me that it's common for SIM's to go bad after a year of use(purchased the phone in May of 2013). Replacing the SIM card did not seem to help. The phone continuously/randomly had full service than dropped to no service and had the same symptoms as i experienced earlier. After this, i took the next logical step, i set up a repair with apple. I shipped my iPhone out to apple. After testing, apple explained to me that my iPhone passed all of their tests with no problems. I'm sure after hearing this anyone would be excited to get their phone back! After getting the phone out of the box and powering it on, i was thrilled to see signal. Knowing apple said they did not replace the phone or make any modifications, i was still a little skeptical but hoping apple was right. So around 5 minutes of having the phone powered on/ re-installing my apps, the phone's filled bars were empty, about 30 seconds after they dropped empty, the dreaded "No Service" appeared on my notification bar. Before i receive reply's asking to call Verizon and check signal strength in my city, i have two other phone's in my household, one being an iPhone, with Verizon. Both of the other phone's don't have cellular problems. Although my iPhone was said to pass the tests, are i not safe to assume that there is a hardware flaw in my phone? I'm an apple care customer so my hardware issues should be covered. Although apple is not able to replicate my problem, it does not mean that my device is not working. I cannot take the phone to an apple store due to my location. Has anyone had similar problems with the iPhone? I'm currently using an android device as a temporary replacement and it's driving me insane. I don't like the phone but as most of you know, phone's are important in modern day life. Has anyone had similar problems? If so, how did you go about solving it. I really want to use my iPhone again. I belive it is an internal error, maybe the motherboard is going bad? the antenna? i just am a little confused on how the apple tech's did not find the issue. Anyways thanks for the read and future comments:) best of luck to the all of you Cheers

If you have already had your phone checked and there is no hardware or software problem, then anything to do with service is a carrier issue and you need to contact your carrier.
Nobody here can help you with this because you need to contact your phone company/carrier instead.

MAJOR Ipod Mini Issues!!! HELP PLEASE!

Oh My~lanta! I am just about at my wit's end w/ this too!!! I'm experiencing the same problems although it seems like everyday I get a new error message!!!! My computer crashed back in December and ever since, my IPOD has not been the same. I thought it had something to do w/ the computer crashing but from what I read here, it seems it may be something w/ the latest version of ITunes and if so, why on earth has it not been fixed yet??!!! Today I have just about had it! My Ipod, even after rebooting, restoring, reinstalling won't even work at all and I get a message today that says there was a problem downloading the software and the requested resource was not found. All of this started when I tried to plug in my Ipod Mini to sync it to ITunes. It said IPOD cannot be synced, unknown error occurred (-48). I tried to restore it at that point and then I got the message that it could not be synced, Requested File could not be found. After a few days and trying this again, I got another message that said Disk could not be read from or written to, Corrupted & Not readable; IPOD connection status failed. Last night when I completely uninstalled and then reinstalled, it started to sync and appeared to be downloading most of my songs, well it got to 200 and then stopped, said it could not be synced and completely erased everything again. Today tried all over again as well and got a message on my computer saying Delayed Write Failed, unable to save data on file F. So then I reinstalled and rebooted and all that again and now I have a "coruppted Ipod" and can't even do anything with it! I'm at a loss and pretty upset that there is not a 1-800# that I can find to call and talk to somebody about this over the phone! Any help???!!! Please, I'm really freaking out about this!

"Disk could not be read from or written to" I have the same problem, can't copy any music to my iPod, why's that, I think it's got something to do with the new iTunes

Mac user-issues downloading Creative Suite-help please

I cant seem to get this thing to download and the FAQs are not very helpful...I guess what i really need to know is how the heck to download this? It tells me to find the DMG files but all a see are the files for windows....which brings me to my other question....did i pay for the windows version?? Please help me...I really dont understand much about technology.

If you purchased the wrong version, you need to contact sales support. Nothing anyone here can do for you in that case. Everything else should be easy enough - you account --> my products --> click to download. If you are having otehr problems, you need to be more specific.
Mylenium

My iPod is screwed up beyond all realization. Help, please.

Okay, so, my iPod worked as clean as a whistle, once upon a time. I have been using iPods on my windows computer sucessfully for about 2 years now. I attempted loading too many songs onto my iPod at once, and it froze. I reset it and saw that I needed to restore my iPod. I restored it, and then attempted to add all of my songs again. The program I was using to do it (winamp) froze. So, I restored my iPod again and attempted using iTunes. It froze again. I attempted it again with iTunes (after restoring it for a third time), in smaller partitions, however it still froze. I gave up for a while. I came back to attempt again, a few weeks later. The iPod displayed the sad emoticon, and then restarted, and got caught in an endless loop of restarting and sad-faceing. Upon connecting my iPod to my computer, it takes about 2 hours for my computer to recognise that there is SOMETHING attached to the computer, and then anytime I try to look at the device, explorer freezes. Also, I cannot simply restore my iPod because the updater utility freezes when loaded. I have tried uninstalling and reinstalling all of my iPod software, to no avail. Also, whenever my iPod is connected to my computer, my audio drivers fail and my computer cannot start up. The "Do Not disconnect" symbol remains on the iPod for about an hour after it is disconnected. What should I do? I am stubborn enough and lazy enough that I don't want to just get a new one. Does anyone know of a third party utility I can use to solve my problems? And solutions at all to my problems? Thank you for reading this wall 'o text, by the way.
Windows Windows XP

bump!
Please help!

E1200 v2 - issue: all solid lights - help please

Similar Messages

Maybe you are looking for