E1500 - Extremely difficult setup for experienced user

This is about the tenth wireless router I have configured, and it was by far the most difficult. In their effort to make setup easy for newbies, the wireless setup was extremely confusing for me. For example, it asks for a name and password for the router. Nowhere was I told that this was the network name and password! And nowhere was I told what kind of authentication was being used. I still don't know. It eventually took over an hour to get working, and I still don't have bi-directional wireless communication with my printer established. Bottom line, I sure wish that Cisco provided an "experienced user" setup!

So the concern that you said is the configuration of the Router ( E1500 ).. So could please inform us the name of the ISP( Internet Service Provider )... Because the configuration depends on your ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD......so for that you need to unistall the existing Cisco Connect Software from the computer...
Reset the Router for 30 sec...
and power cycle the network... ( Unplug the router and the modem for 30 sec and then plug them back in )
Make the following connectivity -------- Modem ----> ( Internet port ) Router and then from ( port 1 of the router ) to the -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...Secondly where it will ask for the Router name and Router password that will be your wireless network name and the authentication as well as that will be the Router username and password to get into the Web Interface....

Similar Messages

Team Calendar warning - No Team setup for the user in the selection period.

Good morning,
I am attempting to replace the older iViews (leaverequestapprover and teamcalendar) with the newer iView (approveleaverequest) which seems to combine the two functions.
When implementing the approveleaverequest iView, I get the following mesaage "No Team setup for the user in the selection period. Contact Administrator."
However, looking at the older Team Calendar iView, teamcalendar, I can see the team. Both iViews are assigned to the Team page for comparison.
Not sure what's wrong but I'm confident I have all the configuration correct else the test team members wouldn't be appearing in the older iView. I've read some other unanswered posts that asked the same question and rechecked all the objects people had suggested.
What's even more puzzling, if I have one of my managers submit a leave request to their manager, the approveleaverequest iView will show the entire team with the leave request for the manager waiting for approval.
I'm stumped and could use some guidance on how to get the team calendar to work.
Kind Regards,
Garrett Meredith

Re: Manager unable to approve employee leave
chk above thread once and chk any authorisations are missing or else assign and test once for some users
and you need to activate wdabap business function ess_wda_2 in swf5 if ur using abap functionality HCM, ESS on Web Dynpro ABAP 2 - Human Capital Management - SAP Library

Questions for experienced users

For all experienced users, a few observations and questions:
1) Is it really true that Compressor 2 takes over 24 hours to encode a 15 minutes piece of 1080i HD video from FCE into an H.264? or am I doing something wrong in the settings?
2) The same piece of video encodes a QT movie in 2 hours but the artifacts make the video look extremely unprofessional (to put it mildly).
3) It cannot be true that after spending this much money on professional equipment, that I receive results this poor. I see that others have voiced the same frustrations with Compressor 2 and DVDSP4, HD video etc. What I am referring too specifically is poor encoding in Compressor ( the answer "get a different piece of software" is not acceptible) and DVD's that have artifacts that make the results look worse in quality that amature video from several years back,
this is why I and others depend on sage counsel from more experienced users. so people with condescending or sarcastic pseudo answers need not reply here.
4) Please recommend a workflow that does not produce artifacts from 1080i HD video, to FCE 3.0.1, to DVDSP4 ( via QT 7 or Compressor 2) using the system speced below.
5) Please also recommend a workflow of the same for video that can go out on the web or for cell phone content. ( refer to the problems with H.264 with web content, and any info you may have on the 3G content)
Thanks
BBP/BR

Well, Mikey and PQRTV or whatever really got to the heart of the reason why I placed that line in my first post:
I got my mac system about a year ago. before I got the system, my cousin the computer genius lovingly teased me because I literally didn't know what a jump drive was. 8 months later, I gave a presentation at the apple store about filmmaking with the mac. my point?
using the mac system as a (professional) tool does require a new thought process ( coming from the PC windows lower ****). I too look(ed) for quick fixes, but a little bit of time with FCE, DVDSP4, Compressor, etc. teaches U very quickly that things take time and patience and study. having no previous IT or computer background, it was and still is a challenge, but I get it more now.
in general, just keep in mind that a post may be from someone who 1) might be new to the idea that You have to think a bit differently when trying to execute processes with a mac/professional system, 2) might not have a whole lot of IT experience ( mac makes it really easy to get Your arms in up to Your elbows really quickly), and 3) is after all a human being who is, when they posted, 4)most likely sleep deprived, working on a dead line and stressed at level 11.
and Yo PD, I thought the weeding video quip was kinda funny but snide. we can at some point "philosofahzize" about what kind of hussle one sometimes has to get into to keep the rent paid while pursuing the real dream.
And as my man Mikey pointed out ( and I'm sure PDFTV and others will agree), authoring, filmmaking, graph design, music, is all an ART FORM and CRAFT and it takes dedication and perseverence to "master" just ONE aspect, let alone those of us who write, produce, shoot, edit, author, burn, make the soundtrack for, make the poster for and finance our own projects. ( raise a fist and go "yeah" if U feel me on that!)
so if U are a newbie, KEEP THAT IN MIND when U are about to pound Your head or the computer or both against the wall becuase it doesn't happen the first time You try.
ANYWHOOOO
I exported the 1080i HD video ( 10 minutes long) from FCE 3.0.1 compression type 1080i60, current frame rate, key frames every 24 frames ( we shot with that cineframe funtion on the camera) and checked frame reordering. data rate automatic and NOT prepared for web streaming. sound: uncompressed 48kHz ( I wanted to take it into DVDSP4) I got a GREAT LOOKING but rather large (1.45 GB) QT movie . my subtitles at the bottom made in FCE looked a bit fuzzy at full screen size, but the Live Type looked GREAT. NO ARTIFACTS in any size. BUT UNFORTUNATELY, DVDSP4 agve me an "imcompatable asset" message when I tried to import it. ( and by the way, it took 2hrs and 10 min to process to QT movie)
SOOOOO.....
From FCE I exported the file to compressor 2, setting: the 90 minute best quality 16:9 MPEG 2 6.2 mbps 2 pass setting. this bad boy LOOKS GREAT and took a whopping 10 HOURS to compress. but my sound file didn't come out (?) so I exported QT movie sound only from FCE and this took 10 seconds. brought them into DVDSP4 and got myself a pretty kick a@@ looking widescreen SD video.
oh, my DVSP4 settings? 4:3 letter box, encode on import ( although since it was already an MPEG2 it was no sweat) with 6.0 mbps min and 7.5 max.
I'll keep in touch on other posts with more experiences. Thanks for the help!
and with this post concider the question offically, answered!
peaceBBP/BR
www.blackbusterproductions.com
www.blackdawnrecords.com

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

How to setup for multiple users accessing same share?

Hi!
Recently picked up Mac Mini Server and have some configuration questions related to sharing files & information over the internet. Whenever possible, prefer to use the built-in features & tools, not 3rd party tools.
My setup & needs are this:
- Have folders & sub-folders with files to share.
- Wish to give individuals access to the shared folders, each with their own account (and access logging).
- Shared folder and files should be visible via web to authenticated users only (so no special client or setup is needed).
Right now, have added a Website via Server.app that points to the folder with files to share, and that works somewhat, but doesn't support individual user accounts separately?
Thought maybe to setup VPN but that seems like massive overkill for this (and is a pain in the butt for non-technical users to setup).
Editing httpd.conf for user support is a possibility, but seems /etc/apache2/httpd.conf only applies to the default web server (on port 80) not the one i set up in Server.app?
Can anyone recommend the best approach, given the above needs?

I have a related question. i created 2 websites/domains then i went to users and created 2 seperate "network" users then i went to ftp and selected each website and added only user A to site A and user B to site B. what's weird is that when i try to ftp using either of the users it seems to land on the same site. i looked at shared security for the folders and it only shows user a on site a folder and user b on site b folders. am i doing somehitng wrong or is this how it works in mountain lion server? i just want to give the domain owner ftp access so they can manage their files and only thier files. i also had to turn on open directory so that it would not create a local user but a network user. do i need to turn that off and just deal with having a bunch of local users as ftp user? i want to host multiple websites on the server and NO users remote on to server besides ftp.
edit 1: i only have 1 IP running on the server which i don't think it has any affect on this but thought i mention it :-)
edit 2: i just noticed one more thing that may help. i used filezilla to remote in using both users, one at a time. it seems to allow both users in but then it shows same directories. i then created a file using the one that was not supposed to have acces and it never sows up. but if i remote desktop to server i can see the new file in the correct folder. so it may have something to d o with the directory listing.

Profiles Setup for XI User

I want to create a user , and user should have the following access/autherization.
1) create Software component/Technical system/business system and he can not create XI SLD and modify others Technical system/business system.
2) IR/ID and RWB access
3) At clent side all XI/IDOC/RFC Related transaction authorisation
(IDX1,IDX2,IDX5,sm59,bd64,bd54,we21 etc. IDOC/RFC related).(user cannot to do other System/R3 traansaction).
what are profiles I need to assign to User for above access.
Thanks,

Bala,
Since you dont want the user to configure and administer SLD dont give the roles SAP_SLD_ADMINISTRATOR, SAP_SLD_CONFIGURATOR and SAP_SLD_DEVELOPER.
Also since you dont want XI administration dont give him the role SAP_TST_XI_ADMINISTRATOR and SAP_TST_XI_CONFIGURATOR. So give to him only SAP_TST_XI_DEVELOPER. Also give him SAP_XI_DEVELOPER_ABAP and SAP_XI_DEVELOPER_J2EE.
Also whenever you are creating the roles just go to SU01 and give the username and click on edit. Then click on Roles tab and then click on in Role text tab and press F4 and then enter. There you can see all the roles. So you check them and assign to the user.
Also if you want to see which transactions you have to assign to the user. Go to PFCG and click on transactions. Then you enter the Transaction name and press enter. Then it gives all the role names under which the transaciton is used. So you check the role and can add the role in SU01 as mentioned above.
Hope this helps...
---Satish

Selling comp. + setup for new user

I was wondering if it was possible to install Leopard on my machine with additional apps and then allow the user to turn ont he computer and set up their main/admin account like a NEW machine, if that is at all possible?
i wanted to include my Leopard 10.5 + iLife 08 (they werent preinstalled with the system)
thanks!

As long as you follow the license agreement of the said software and distribute that software to them discs and documentation, and delete any copies you've installed on your machine that you keep, you can follow these directions*:
http://www.macmaps.com/selling.html
- * Links to my pages may give me compensation.

Setup iPad for other user when iCloud pw is unknown.

I'm a tech director for a school district with ~450 iPads. Often, I get students or staff who move out and leave their iPads logged into iCloud as themselves. I need to get these iPads setup for other users. How can I setup an iPad if the previous user is long gone?
Nobody is going to give me their Apple ID password and I wouldn't expect them to. Recovery mode lets me wipe it but I still need to enter the previous user's Apple ID and pw to proceed.
I don't use Configurator; I prefer iTunes.

Might be some help on this link, but you may need the password.
How to Safely Delete an iCloud Account
http://9to5mac.com/2013/07/13/how-to-safely-delete-an-icloud-account-from-your-m ac-or-ios-device/
 Cheers, Tom

Need help in setting up Group Policy for same user in local system and Terminal server

Hi All,
Currently our remote users are using our network using VPN client over internet.
They are generally at their home computer and doing VPN as they have to work only in one RDP server for application.
We actually have a OU created for these RDP users and assign then some strict policy like they can not use any other .exe,they can not user any explorer ,they can not even use windows explorer when they are on RDP they just use one exe of their application.
Now what my management want is they want their home computers in Domain and want them to login via their same credentials they are using for RDP but they don't want them to restrict in their home computers with any strict policy.
Now my confusion is how can I configure different policies for same users or same OU.
Can any one guide me please...

you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

802.1x EAP-TLS for wired users with ACS 5.5

Hi All,
We are configuring a new setup for wired users authentication with 802.1x(EAP-TLS). ACS 5.5 we are using as authentication server.
We have added the root CA(internal) certificate and certifcate for ACS signed by CA. Now We want to check the authentication is working or not . I hope both root CA and identity certifcate also we need to install in the laptops. But I am not sure how to download the certifcates for client machine manually from CA.
Kindly suggest on how to get certificates for clients both manually as well as automatically?
Thanks,
Vijay

Hi Vijay,
for the Wired 802.1x (EAP-TLS) you need to have following certificates:
On ACS--- Root CA, Intermediate CA, Server Certificate
On Client-- Root CA, Intermediate CA, User certificate(In case of user authentication) OR Machine certificae(In case of Machine authentication)
I am not sure which third party certificate are you using, If its in house Microsoft or any other certificate server then you need download the client certificate from the server itself.
In case of Microsoft, There will be a template for user certificate. You can select it and create user certificate
This one is an old document, But has steps to configure Machine certificate for the user, You can see the steps to download user certificate if its Microsoft server:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43722-acs-eap.html#wc-2
In case You are using the third party certificate serevr , Then you need to check with them on how to download the user certificate
Cheers
Minakshi(rate the helpful post)

We have two Apple ID's but share the same computer....that runs Itunes...How do i setup Icloud for ea. user ID?

We have two Apple ID's but share the same computer....that runs Itunes...How do i setup Icloud for ea. user ID?

You can't merge Apple IDs. What you could do is set up your phone to use the same iCloud accout you are using on your Mac. To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off. When prompted, choose to keep the data on the phone. When everything is off, scroll to the bottom and tap Delete Account. Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc. When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

User POV setup for Financial Reports

In FR 9.3.1, anyway that we can setup a list of POV members that applies to all the users by default.
Currently, I have to login as each individual user and then setup the POV for each of them.
Thanks in advance

yes thats correct.
one need to setup this for every user.

Need advice on best setup for Extreme and Express w/ (n only) network

I'd like to get some advice on the best setup for my situation. I've read a number of posts on WDS, Extending a Network, etc. and, unfortunately, I'm now more confused than ever.
We have an Airport Extreme 802.11n using WPA2 Personal, 2.4Ghz (n only connection) which I've found to give us the best range/connection speeds for the following devices (all computers running 10.5.5, Apple TV's using most current update):
(2) MacBooks
iMac
(2) AppleTVs
The good news we have a large house, the bad news we have a large house. Meaning of course that I don't get the range in parts of the house I'd like to. I also have an older Mini (G4) connected to the AEBS thru ethernet (the Mini acts as the iTunes server for the ATVs).
I just bought a new Airport Express with the desire to place it on the other side of the house to both enhance the range of the wireless network and to provide another wired to wireless connection to the network.
I initially merely chose to "Extend a wireless network" but that seems to have a MAJOR adverse impact on the speeds of the wireless network. dropping the streaming to one of the ATV by like 90%. I would like to maintain the security settings I have as well as the 2.4Ghz (n only) since these provide the best speed/connection range on the AEBS.
My question then is what is the best way to use the AX (WDS? Bridge?).

The best way to use it is the option you chose "Extend a wireless network".
WDS forces you to the much slower 802.11g and even cuts that bandwidth in half.
Operating as a bridge has nothing to do with wirelessly extending a network. Changing this option won't have any effect on wireless bandwidth.

E1500 - Extremely difficult setup for experienced user

Similar Messages

Maybe you are looking for