E1500 - Great until Firmware 1.0.02
This was a great wifi router until Linksys released firmware 1.0.02. Now, it will no longer connect at N. Only connects at G or below. Linksys also will not honor the 12 month warranty. Called for support, only to be told that I needed to pay because I was not entitled to support after 7 months of ownership. I have been a failthful Linksys user since 1997, but I think I will need to go somewhere else now.
After a firmware upgrade, it is recommended to reset the router. Please press and hold the reset button for 30-40 seconds, power cycle the network and reconfigure the router. This should resolve the issue of connectivity with the 'N' devices.
Cisco Linksys products come with a limited warranty that covers your hardware against any manufacturing defects for 1 year (90 days for refurbished product). In addition, Linksys products are eligible for Complimentary Assisted Support for 90 days to get your product up and running. The free Complimentary Assisted Support includes technical phone support and live chat. So, if you are calling within the hardware warranty period but you had the product for more than 90 days, you won't be eligible for the free technical support over the phone. However, there are certain fee based options and the complete details and limitations can be found in the document on the product CD and on the cisco website.
Similar Messages
-
I purchased an ipad for my Mother and it has been great, until now. It is now asking for a Passcode to access it and I don't have one.
Can anyone help ?In Setttings - Mail, Contacts, Calendars select your MobileMe account. Make sure Find My iPad is turned on.
-
I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.
I tried rebooting. It didn't change anything.
-
I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I have a project that appears to be great until I export to either .M4A or .Mov and then everything looks like the cameraperson has had some serious seizures. What is odd is that the stabilization works great while working on the project in Imovie. Can anyone help? The content was captured using a Samsung HD video camera (flash memory).
DJim
Sorted.
I found a post elsewhere and the suggestion was to delete the projects folder. Then launching IMovie, the software creates a new projects folder, and I moved the projects in one by one, until I found the one that crashed it.
I suspect your solution would have been quicker however!
I just wish IMovie was less sensitive and just told me what the problem was!!
Thanks again. -
IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
Message is almost acting like a pop up.Hi
I constantly get same message. When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to. -
Model A1236 Nano iPod worked great until today. This morning it didn't turn on. Thought it was battery. Charged it but didn't help. Turned it off & on. Isn't recognized by iTunes or Computer Devices. Now what?
I suggest you take it to Apple and ask them to check it out for you.
-
My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now, it it does NOT work at all. ???
I have reinstalled my google bar AND firefox 4, with no improvement. ??????????Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
WRT160N. Wireless works great until I turn on my wired desktop.
WRT160n v1 firmware 1.02.2
Only have printer and laptop connected wireless.
Wired connection works good.
Wireless connections works good until I turn on my desktop ( wired)
If wireless does work with desktop on (big if) very slow page loading.Well try resetting the router for 30 seconds in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cable from the modem & from the router & then plug the power cable to the modem first & once all the lights are solid green you could plug the power cable to the router & you will be able to go online wirelessly.
-
Works great until I try to quit the app. Hangs every single time.
Just updated to iLife 09 specifically to take advantage of the new iPhoto features. When I go to quit the app though, a small window drops down saying that it is saving data with a button that gives you the option to finish the save at a later time. Clicking this button will successfully quit the app. If I let the save go through, once the progress bar fills up, it starts blinking and will either 1) crash the app resulting in a message from the OS, or 2) remain on screen until I force quit.
Running the latest version of iPhoto. Has happened ever since the initial iLife 09 install. Any help would be GREATLY appreciated!Library is in my "Pictures" folder. I never moved it out.
I created a new library as you suggested, entered photos, tagged names, and quit. It quit right away without even stating that it needed to save anything like it does in my main library. The actual message I get when quitting my main Library is this:
"iPhoto is saving critical information for your photo library. This information includes recent changes such as imported photos, album updates, and ratings. If you prefer, you can save this information later."
There is a progress bar underneath, and a button that says "Later". If I click the button, it will quit. If I let it run through the save process, the progress bar fills up and then blinks indicating that the app has locked up. I even let it sit there for hours and it never quit after the progress bar was showing that it should be done. -
so i have a 2.0ghz macbook with 2gb of ram
if i don't have much open it runs like a champ.. super fast.. like just safari and ichat
but if i put in a cd.. and have itunes on (playing from an external hard drive).. and a couple other programs in it slows down big time.. slightly freezing (as in showing the colored wheel and freezing for like 5 or 10 seconds).. and i understand normal slow downs but its not just that.. if i eject the cd or close everything but the small stuff again its still completely messed up.. like only ichat and safari are open again and they continue to freeze and such.. and that goes on until i restart..
i was looking at a system monitoring widget and i can't tell anything really crazy.. processor is less than 70% all that time even when the "big stuff" was open.. and ram was never completely used.. and the temperature.. well the temperature gets hot but its not conistent enough to make me think its the temperature.. it will get really hot but still runs great
also i ran the hardware test from the install cds.. nothing..
could this be hardware related? my 14 days is up tomorrow so im not sure what to do :/
any ideas?Thank you so much, Mr. Curtis! I'm not sure exactly how that worked, but it allowed me to get back on both AE and Premiere Pro. 10 points to you!
Also, for the other people that may have similar problems and are viewing this forum, definitely try this out. Listen to Jim's advice, don't use the most recent version (which is currectly 5.5.47) - instead try a slightly older one. The one I had installed was version 5.5.24.
Once again, thank you! You saved my project! -
My update to 7.0.2 was working great until I turn off the iphone
please someone can help ..the update was great ...speed, a lot of new good things ..all nine yards
..until I turn off the iphone 4..when I turn it on again the wifi was not working anymore
I read some suggestions..tryed some of them ..like taking the coma on my iphone4 name...that was the one that turn almost the best..it turn grey to green but the it stayed for almost 5 minutes looking for a network..and it is not the router..I have my ipad next to me working excellent with wifi but with old ios6
please fix the problem??reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde -
HP Photsmart C4680 worked great until Snow Leopard please help
I have uninstalled and reinstalled the software and everything is fine until I try to have the printer and the Mac communicate. I have had nothing but problems since Snow Leopard. If someone can help me with my printer problem or tell me how to uninstall Snow Leopard that would be even better. Thankx!
OK,
I am glad scanning through Preview is working. Scanning through Image Capture and the Desktop Printer should also work. If you want to use HP Scan (which replaced HP Scan Pro), a full Snow Leopard compatible solution for the HP Photosmart C4680 is available from [HP.com|http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=a l-75095-1&lc=en&dlc=en&cc=us&lang=en&os=219&product=3739150].
Just trying to help.
Andrew -
CS5 Idle Tasks work great until they stop
I've got an Adobe InDesign CS5 ExtendScript (javascript for the search engines) that when the users do certain tasks it triggers some idle tasks. It works great most of the time. What I'm finding is that at some point the idle tasks stop and they just queue up. It doesn't seem to matter how long Adobe InDesign has been running.
The code is constructed so that when it tries to create a new task that it checks if an existing task to do the same thing is already in the queue. If it already exists in the queue it doesn't add it again. So in that regard I'm not creating an infinate lists of tasks. But at some point it just stops processing the idle tasks in the queue, sometimes with just a single task to process.
InDesign itself seems fine. But no more idle tasks will fire. I've checked the task manager (it is windows XP) and InDesign doesn't seem to be doing anything to prevent getting in some idle tasks.
Any idea how I can figure out: A) what stopped it. B) How to start it back up?
jswI've got an Adobe InDesign CS5 ExtendScript (javascript for the search engines) that when the users do certain tasks it triggers some idle tasks. It works great most of the time. What I'm finding is that at some point the idle tasks stop and they just queue up. It doesn't seem to matter how long Adobe InDesign has been running.
The code is constructed so that when it tries to create a new task that it checks if an existing task to do the same thing is already in the queue. If it already exists in the queue it doesn't add it again. So in that regard I'm not creating an infinate lists of tasks. But at some point it just stops processing the idle tasks in the queue, sometimes with just a single task to process.
InDesign itself seems fine. But no more idle tasks will fire. I've checked the task manager (it is windows XP) and InDesign doesn't seem to be doing anything to prevent getting in some idle tasks.
Any idea how I can figure out: A) what stopped it. B) How to start it back up?
jsw -
Firefax used to work great. Just upgraded to 3.6. Now firefox loads, but I'm unable to access anything on the web.
== This happened ==
Every time Firefox opened
== I upgraded to ver 3.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322)If you aren't able to connect in Firefox, but can connect with other programs, the most common cause is a firewall. See [[Firewalls]] for instructions on configuring firewalls.
Other possibilities for broken connections include:
* Proxy settings can be misconfigured. Check these the [http://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel Advanced panel of the Options window].
* You are in offline mode. Make sure "Work offline" in the File menu is ''unchecked''.
For other causes, see [[Error loading web sites]]
Maybe you are looking for
-
How Do I Replace the Hard Drive in my 20" Intel iMac?
Pretty sure the hard drive in my iMac is dead. When I try to start it up it makes clicking noises then i get a grey screen with a flashing ? mark folder. I was able to boot from the software disk so i could run disk utility but when i did i doesn't e
-
Hi All, I have one problem with the client requirement. Customer having the debit balance of 100000 for one invoice with Cash discount of Rs 2000 Client received the payment from that customer say 120000. So after adjusting the above invoice and ca
-
My Ipad 1 keeps on crashing After updating to OS 5.1.
I have actually cancelled all the services on my Ipad and stripped it down to the bear necessary. Even deleting halve of my apps and keeping only the apps I use every day. Still no success. No more Icloud either. I also installed a 'system monitor' p
-
Broadcom hybrid-wl driver issues
Hello. I don't know a great deal when it comes to linux but ive managed to set up arch with the exception of my wireless card. I am running the latest arch on a Dell mini-9. I downloaded the 32bit source code from broadcom's site and followed their i
-
Where to paste my old (default) profile
windows xp I have located my backed up profile and can do a "copy" when I reopen firefox and go to basic application open containing folder quit a few files with different extensions open up...which one do I paste to?