E1550 - Error code 82BD0119, Cisco Connect gives connection timeout error during setup

During setup, after 90% completion I get "adapter connection timeout period expired". I'm unable to configure my router.
I downloaded the lates Cisco Connect software and tried that as well but I get the same problem.
Operating System : Windows Vista Home Premium SP1 (32 bit).
Any help will be apreciated. Thanks.

I believe you have a static IP address assigned in the computer. Here are the steps to check for the wireless:
~~ Go to Wireless network connection properties.
~~ Click On Internet protocol TCP/IP and go to properties.
~~ Select 'Obtain IP address automatically' and 'Obtain DNS server automatically'.
~~ Click OK and then close.
Check for the Local Area Connection as well in the same procedure.
Then uninstall the existing Cisco connect software, reset the router.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
After performing the following steps install the Cisco connect again and check the status.

Similar Messages

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.Main

Hi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com

Microsoft office professional 2013 encountered an error during setup

Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?

I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

"Microsoft Office Professional Plus 2013 encountered an error during setup."

"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?

Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

Strange error during setup in vista

Greetings all,
I have a problem that Iam unable to get an answer to so -- I installed oracle calendar (version 10.1.2.3.0.398) and when i try to setup the connection to the server I get this error
Unexpected Service Error
Module: <ConnEditDlgUi.cpp>
Label: 187
Service error: #0x50904
I have the same oracle calendar version working fine on my vista office computer; Any suggestions on how i go about finding the root cause??
Thanks :)

The ultimate fix seems to be to run a Winsock fix for the TCP/IP stack on Vista. Not sure what caused it to go stupid in the first place, but it may have been Symantec suite. Removed Symantec using their own reg cleaner and run the fix. It's back to normal. Since the SP1 is not yet available via MS Updates, I wonder if it would have done the trick as well.

Microsoft SharePoint Server 2013 encountered an error during setup

(the html editor over here is a pain you know where - not even bold text is working...)
Every time I try to install SP 2013 SP1 on my WS 2012 R2 Update virtual machine the installer dies.
NOTE: I can reproduce this any time. Both the SharePoint 2013 (including SP1) .iso as well as the WS 2012 R2 (including Update) .iso are fresh copies out of the MSDN library.
The installation fails where the installer tries to install the binaries. No configuration wizard yet. I made sure all the prerequisites are there. The PreRequisitesInstaller.exe reboots the virtual machine several times (twice) and then it is all set.
PS C:\Users\bsom> add-windowsfeature net-wcf-http-activation45, net-wcf-tcp-activation45,net-wcf-pipe-activation45
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\rsom> Add-WindowsFeature Net-Framework-Features,Web-Server,Web-WebServer,Web-Common-Http,Web-Static-Content,
Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-App-Dev,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-
Health,Web-Http-Logging,Web-Log-Libraries,Web-Request-Monitor,Web-Http-Tracing,Web-Security,Web-Basic-Auth,Web-Windows-A
uth,Web-Filtering,Web-Digest-Auth,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Mgmt-Tools,Web-Mgmt-Conso
le,Web-Mgmt-Compat,Web-Metabase,Application-Server,AS-Web-Support,AS-TCP-Port-Sharing,AS-WAS-Support, AS-HTTP-Activation
,AS-TCP-Activation,AS-Named-Pipes,AS-Net-Framework,WAS,WAS-Process-Model,WAS-NET-Environment,WAS-Config-APIs,Web-Lgcy-Sc
ripting,Windows-Identity-Foundation,Server-Media-Foundation,Xps-Viewer
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\bsom>
UPDATE: I had a quick look at %Temp%\SharePoint Server Setup(20140513...).log
2014/05/13 20:30:40:858::[2344] Log level changed from: Verbose to: Standard
2014/05/13 20:30:40:858::[2344] Error: Failed to install product: D:\global\oserver.MSI ErrorCode: 1603(0x643).
2014/05/13 20:30:40:858::[2344] Log level changed from: Standard to: Verbose
2014/05/13 20:30:40:858::[2344] Rolling back chain
Any ideas?
UPDATE: Installing office prior to the sharepoint installation had no effect (solution was suggested here).
UPDATE: Installing all windows updates (for Windows Server and Office client applications) didn't help either... same error.
UPDATE: I made sure my windows server and sharepoint server images are exactly those you can currently find on MSDN. SHA1 hashes match.

I just did a Server 2012 R2 and SP 2013 w/ SP1 install the other night on Hyper-V running on 8.1 Pro without issues. ISO was from MSDN.
Have you run a crc (or md5, forget what is used) to validate the ISO matches what MSDN says it should be?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

BBM 7 giving error during setup.

I have upgraded my BB OS and have lost all of my bbm contacts and it doesn't restore from the BlackBerry ID (Temporary BBM Server Error). I have tried downgrading to BBM 6 and then back to BBM 7, but the same problem persists. Can anyone please assist me on this?

Hello!
Here is a KB that discusses that error:
KB33780 "A temporary server error has occurred error" may be displayed during initial setup of BBM and BBM contacts appear to have disappeared
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error during setup of VSLS2011 "setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager.."

Hi
I have VS 9 installed and was wanting to install LightSwitch so downloaded the ISO(VSLS2011_ENU.iso) and burnt to disk ran
setup.exe and received the this message.
"Setup could not install the following component:
Microsoft ApplicationError Reporting"
The log shows..
[02/09/15,13:52:02] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/09/15,13:52:03] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/09/15,13:52:04] SimpleUI: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
[02/09/15,13:52:05] SimpleUI: [2] DepCheck indicates VC 9.0 Runtime (x86) was not attempted to be installed.....
.NetFramework 3.5
C:\Users\xxxxxx>Winmgmt /verifyrepository
WMI repository is consistent.
PC is win 7 pro 64bit

Hi ghw123,
Welcome to Lightswitch forum.
According to the error message above, this issue is related to verification. For this issue, you need make sure that you download VSLS2011_ENU.iso from Microsoft official site, see:
http://download.microsoft.com/download/8/0/0/80047AD9-1D3E-46EB-8CF8-DFDA59E7799D/VSLS2011_ENU.iso
In addition, if you want to learn LightSwitch, I'd like to suggest you to download VS2012 or VS2013, many new features are added to them. see:
http://www.visualstudio.com/en-us/downloads
You need select the Lightswitch option when you install VS2012/VS2013.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Sharepoint Designer 2013 encountered an error during setup

I'm trying to install SharePoint Designer 2013 on my system, but I keep getting this error with no other detail. Looking into the SetupExe log file that the event viewer pointed to didn't really identify anything that would point me
to the culprit (or at least nothing I could decipher). I am running Windows 7 (64 bit) and Office 2010 (32 bit). Anyone run into this before?

I am also trying to install SP Designer 2013 (32-bit) on my Windows 7 Pro 64-bit OS with MS Office 2010 32-bit and getting the same error about 30% into the install. I have attempted to uninstall other 3rd party programs and apps for example Citrix
and Skype and still no success. I tried booting up in safe mode and get the same error right at the onset of the install.
Update: Tried a "clean boot" install and that also failed.

Unexpected error during setup

I am trying to get a new Time Capsule setup. It's starts the process but when it trys to to join an existing network I get the error, "An unexpected error occured. Try again."
I have tried resetting etc, any thoughts?
Thanks,
-Ed

Join a network is not an approved Apple setup for the TC and why it is hidden.
I suggest you avoid it if at all possible because the moment it works the ethernet ports will be shut off.
Anyway if you are determined.. the security type must match.. generally that means you cannot use wpa/wpa2.. it is not specific.. use wpa2 AES on the router you are joining and wpa2 personal on the TC.
Remember joining wireless to another brand device is never a 100% guaranteed operation. You cannot ever be 100% sure it will work.. wireless chipsets from different manufactures simply will not work together. Apple designed their stuff to work with other apple routers.. so you use extend not join. You may end up having to think up another way to do things.

Error during setup of software update deploy or download.

Hi,
We periodically get an error on a single patch download when finishing up the deploy of a software update as shown in the screen shot.
Does this mean the download is ok except for the one patch or is the entire deploy broke?
Thanks Lance

You need to ensure your proxy settings "as the computer" account is to open a command prompt (as admin), and run "psexec -i -s -d cmd" which will open a new command prompt "as the computer" then launch Internet explorer from wherever it resides in c:\program
files\etc... and try to open that web page from Microsoft that it's having trouble with. i.e.
http://wsus.ds.downl...oft.com----.exe and see if you can open the file. that will rule out any proxy issues
Also For this issue, You can refer answer of Jörgen Nilsson in below link
http://social.technet.microsoft.com/Forums/en-US/6eb3d968-cadc-4aa8-9352-d75d10a72162/automatic-deployment-rule-not-downloading-the-updates?forum=configmanagergeneral
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

E1550 - Error code 82BD0119, Cisco Connect gives connection timeout error during setup

Similar Messages

Maybe you are looking for