[E17] lock and keyboard layout problems when suspend

Hello,
I just installed E17 on my Dell Vostro laptop. The main problem I have is related to the suspend mode.
In settings > screen > screen lock, I enabled the option "lock on suspend" and the keyboard layout is selected to "be (default, basic)" (I have a belgian keyboard).
When I use the menu system > suspend, the screen is locked. But when I suspend my laptop by closing the lid (I see the power light indicator blinking on the side, so it's suspended) the screen is not locked when I open it.
Also related to the suspend mode. The layout is set to belgian (in the screen config as explained above but also in vconsole.conf and in /etc/X11/xorg.conf.d/10-keyboard.conf). When I put the luks decryption key or when E17 starts at boot, I have the right layout. However when I resume the laptop after being suspended, the layout is switched to qwerty (en_us I guess).
Any idea why ?
Thank you
PS: this problem is maybe more related to E17 than to Archlinux but I haven't found any forum about enlightenment. If you think I have better chances somewhere else, let me know.

I was having problems with E17 after a fresh install (mixer problem, key bindings, etc), and I fixed it by deleting the configuration files at
~/.e
as the wiki says.

Similar Messages

Non-US keyboard layout problem with VNC

Hi everyone,
I've got an arch box at work running tigervnc through an ssh tunnel so that I can work from home when I need to.
Everything is great, as long as I'm using and ASCII keyboard layout.
When I switch layouts, the keystrokes just don't get through to the server.
Here's what I use to switch layouts:
setxkbmap -layout us,ru -option 'grp:alt_shift_toggle'
So I need to type in russian, and I hit alt-shift, as usual, and start typing, but nothing is echoed back to me. I can tell that the keystrokes are just not getting to the destination because if I'm at a terminal and I'm switched to the ru layout and I type something and hit enter, I just get a newline, as if there was nothing typed at all.
Any ideas?

Hi,
Why are the characters mixed up in the session?
This issue can occur if the keyboard language has been switched on the remote PC while running a remote desktop session. In the case you would like to switch to a different keyboard
language follow these instructions.
Important:
The remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device,
you need to manually switch the keyboard language on the remote PC.
1. Open settings on your device.
2. Tap General and then tap International.
3. Tap Language and select the language running on the remote PC.
4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
Quote from
Remote Desktop Client on Mac: FAQ
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Lock and keyboard sounds not working? what's up with that?

lock and keyboard sounds not working? what's up with that?

Im having the same problem. Just stopped working yesterday two days after i bought it!!!!

Quick flash of the Num Lock, Caps Lock and Scroll lock, and keyboard freezes temporarily

I have experienced a Quick flash of the Num Lock, Caps Lock and Scroll lock, and keyboard freezes temporarily. This occurs a few times a day. When the Num Lock, Caps Lock and Scroll lock flash i cant typ for a second the keyboard doesnt register the strokes. Is thsi just a hardware clitch or coudl I have a virus? What is teh solution?

Hello Razm14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are experiencing an issue where your computer freezes and the Scroll Lock, Caps Lock and Num Locks keys flash and you are unable to work until they stop. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Windows,buttons,colluns and keyboard layouts

one basic question
final cut 5 have a number limitations for saved windows,buttons,colluns and keyboard layouts?

It's a Henway for "net language"
http://www.urbandictionary.com/define.php?term=1337+speak
N

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

>opens up but stays blank
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

HT5140 I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

You switch keyboards by going to the " flag" menu at the top right of the screen.

Logic 9.1.7 and mountain lion, problem, when i open any plug-in logic take up to 10 second to work orrectly, any click i make logic dont respond

logic 9.1.7 and mountain lion, problem, when i open any plug-in logic take up to 10 second to work orrectly, any click i make logic dont respond

https://discussions.apple.com/thread/4142085?tstart=0

Dwm and non-english keyboard layouts problem

Hi all,
I am using dwm 5.5. I'm Greek so I change between keyboard layouts all the time,
see the relevant xorg.conf section:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,gr"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection
Now the thing is that whenever I switch to Greek (by pressing Alt+Shift) the
dwm tags (1,2,...,9) are not clickable (keyboard shortcuts do work
though, so it's not a very big problem).
Do you have any ideas about how to fix that behavior? I'd go to the dwm irc
channel and ask them, but I'll be a "newbie asking stupid questions" so I
preferred to ask here
Thanks in advance
Last edited by geo909 (2010-01-08 17:23:29)

thayer wrote:Your best bet would be to post your problem to the dwm mailing list:
[email protected]
Will do...
Thanks!

Audio volume not save and keyboard layout configuration problems

Hello all,
I needed to register again because my old account seems not to be working
After almost 2 years without Arch due to work now I'm back to Arch again.
Everything has changed... now there is Systemd and even the installation it's different so I will need some helps from the experienced users
The installation was done yesterday and I found two issues that are really annoying me.
The first one... keyboard layout... Yes it's incredibly... I only want my system in english and my keyboard in norwegian... But all are problems for that. Before telling me to read more or search for information.... I will tell you that I waster 2 hours yesterday only for that... With no success at all.
The second one... even more stupid... why my pulseaudio keep the volumen at 100%? I tried different things... but not success at all.
So please, can you help me?
I will provide all the information you need.
Thanks a lot and so happy to be back here
Best regards,
TheArcher
Last edited by thearcherblog (2014-10-30 17:07:09)

Hello Runical,
To be honest I was following a guide to install the system and everything works ok but according to journalctl I have some problems with pulseaudio so I guess that can be the original problem.
I will paste it here:
$ journalctl -b | grep pulse
Oct 30 13:04:30 arch.colonialOne rtkit-daemon[458]: Successfully made thread 457 of process 457 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 482 of process 457 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 483 of process 457 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 487 of process 457 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 488 of process 457 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 533 of process 457 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Oct 30 13:04:32 arch.colonialOne pulseaudio[457]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
Oct 30 13:04:32 arch.colonialOne pulseaudio[457]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
Oct 30 13:04:32 arch.colonialOne pulseaudio[457]: [pulseaudio] main.c: Module load failed.
Oct 30 13:04:32 arch.colonialOne pulseaudio[457]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Oct 30 13:04:32 arch.colonialOne rtkit-daemon[458]: Successfully made thread 536 of process 536 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Oct 30 13:04:32 arch.colonialOne pulseaudio[536]: [pulseaudio] pid.c: Daemon already running.
Regards,
TheArcher
Last edited by thearcherblog (2014-10-31 06:59:20)

Root pass and key layout problems

Hello. There are two problems. The first is that when I use 'sudo' in terminal it is accept only my normal user password, not root??? Some programs like Shaman require root password.
And the second problem - my layout. I have 'us' and 'ru' layouts. It is working by click to keyboard indicator, but when I press Alt+Shift, both Alt's or Win key (there is my config) is nothing happens. I have only original EN locale - maybe the problem is it?
Last edited by noMaster (2009-07-06 02:24:53)

I was having problems with E17 after a fresh install (mixer problem, key bindings, etc), and I fixed it by deleting the configuration files at
~/.e
as the wiki says.

10.10.3 caps lock and tab key problems

Since I upgraded to 10.10.3 I've had no tab key or caps lock. No one else has written about this. Am I the only one having these problems?
I guess I will take the keyboard home to try with a different Mac.

Hi venustas,
It sounds like you updated your computer and now 2 keys do not appear to be working. You should use this section of the following article to troubleshoot that:
OS X Yosemite: If keys on your keyboard don’t work
If other keys don’t work
You may have accidentally set an option that changes how your keyboard operates.
Choose Apple menu > System Preferences, click Dictation & Speech, then click Text to Speech. If “Speak selected text when the key is pressed” is selected, deselect it or click Change Key to select another key.
Choose Apple menu > System Preferences, click Accessibility, then click Keyboard. Make sure Slow Keys is turned off. If Slow Keys is on, you must hold down a key longer than usual before it’s recognized.
Choose Apple menu > System Preferences, click Accessibility, then click Mouse & Trackpad. Make sure Mouse Keys is off. If Mouse Keys is on, pressing keys in the numeric keypad moves the pointer instead of entering numbers.
Choose Apple menu > System Preferences, click Keyboard, then click Input Sources. Select “Show Input menu in menu bar.” Open the Input menu, then make sure the correct keyboard layout is selected.
To see the keyboard layout, click Keyboard, then choose “Show Keyboard & Character Viewers in menu bar.”
Thank you for using Apple Support Communities.
Regards,
Sterling

[SOLVED] Keyboard layout problems

Hi community,
I fresh installed arch linux and I rly like it. After playing a little around and installing the awesome wm I can't set the croatian keyboard layout.
My xorg.config file:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "logicd"
Option "XkbLayout" "hr"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Arnos Instruments F-417"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
My Xorg.0.log file:
[ 2186.778]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 2186.778]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 2186.778] X Protocol Version 11, Revision 0
[ 2186.778] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 2186.778] Current Operating System: Linux arch 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 2186.778] Kernel command line: root=/dev/sda5 ro
[ 2186.778] Build Date: 21 June 2010 12:01:49PM
[ 2186.778]
[ 2186.779] Current version of pixman: 0.18.2
[ 2186.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2186.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2186.779] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 13:23:50 2010
[ 2186.779] (==) Using config file: "/etc/X11/xorg.conf"
[ 2186.779] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2186.779] (==) ServerLayout "Layout0"
[ 2186.779] (**) |-->Screen "Screen0" (0)
[ 2186.779] (**) | |-->Monitor "Monitor0"
[ 2186.779] (**) | |-->Device "Device0"
[ 2186.779] (**) |-->Input Device "Keyboard0"
[ 2186.779] (**) |-->Input Device "Mouse0"
[ 2186.780] (**) Option "Xinerama" "0"
[ 2186.780] (==) Automatically adding devices
[ 2186.780] (==) Automatically enabling devices
[ 2186.780] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2186.780] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2186.780] (WW) Disabling Keyboard0
[ 2186.780] (WW) Disabling Mouse0
[ 2186.780] (II) Loader magic: 0x7ce880
[ 2186.780] (II) Module ABI versions:
[ 2186.780] X.Org ANSI C Emulation: 0.4
[ 2186.780] X.Org Video Driver: 7.0
[ 2186.780] X.Org XInput driver : 9.0
[ 2186.780] X.Org Server Extension : 3.0
[ 2186.786] (--) PCI:*(0:1:0:0) 10de:00f1:0000:0000 nVidia Corporation NV43 [GeForce 6600 GT] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[ 2186.787] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2186.787] (II) LoadModule: "extmod"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2186.787] (II) Module extmod: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.787] Module class: X.Org Server Extension
[ 2186.787] ABI class: X.Org Server Extension, version 3.0
[ 2186.787] (II) Loading extension MIT-SCREEN-SAVER
[ 2186.787] (II) Loading extension XFree86-VidModeExtension
[ 2186.787] (II) Loading extension XFree86-DGA
[ 2186.787] (II) Loading extension DPMS
[ 2186.787] (II) Loading extension XVideo
[ 2186.787] (II) Loading extension XVideo-MotionCompensation
[ 2186.787] (II) Loading extension X-Resource
[ 2186.787] (II) LoadModule: "dbe"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2186.787] (II) Module dbe: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.788] Module class: X.Org Server Extension
[ 2186.788] ABI class: X.Org Server Extension, version 3.0
[ 2186.788] (II) Loading extension DOUBLE-BUFFER
[ 2186.788] (II) LoadModule: "glx"
[ 2186.788] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2186.813] (II) Module glx: vendor="NVIDIA Corporation"
[ 2186.813] compiled for 4.0.2, module version = 1.0.0
[ 2186.813] Module class: X.Org Server Extension
[ 2186.813] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 2186.813] (II) Loading extension GLX
[ 2186.813] (II) LoadModule: "record"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2186.814] (II) Module record: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.13.0
[ 2186.814] Module class: X.Org Server Extension
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension RECORD
[ 2186.814] (II) LoadModule: "dri"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2186.814] (II) Module dri: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension XFree86-DRI
[ 2186.814] (II) LoadModule: "dri2"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2186.814] (II) Module dri2: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.2.0
[ 2186.815] ABI class: X.Org Server Extension, version 3.0
[ 2186.815] (II) Loading extension DRI2
[ 2186.815] (II) LoadModule: "nvidia"
[ 2186.815] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2186.816] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2186.816] compiled for 4.0.2, module version = 1.0.0
[ 2186.816] Module class: X.Org Video Driver
[ 2186.816] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 2186.816] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2186.816] (++) using VT number 7
[ 2186.820] (II) Primary Device is: PCI 01@00:00:0
[ 2186.820] (II) Loading sub module "fb"
[ 2186.820] (II) LoadModule: "fb"
[ 2186.820] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2186.821] (II) Module fb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "wfb"
[ 2186.821] (II) LoadModule: "wfb"
[ 2186.821] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2186.821] (II) Module wfb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "ramdac"
[ 2186.821] (II) LoadModule: "ramdac"
[ 2186.821] (II) Module "ramdac" already built-in
[ 2186.821] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2186.821] (==) NVIDIA(0): RGB weight 888
[ 2186.821] (==) NVIDIA(0): Default visual is TrueColor
[ 2186.821] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2186.821] (**) NVIDIA(0): Option "TwinView" "1"
[ 2186.822] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
[ 2186.822] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[ 2186.822] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2186.822] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 2186.822] (II) NVIDIA(0): enabled.
[ 2188.363] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 2188.363] (--) NVIDIA(0): Memory: 131072 kBytes
[ 2188.363] (--) NVIDIA(0): VideoBIOS: 05.43.02.39.00
[ 2188.363] (II) NVIDIA(0): Detected AGP rate: 8X
[ 2188.363] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2188.363] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0)
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0)
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0): 400.0 MHz maximum pixel
[ 2188.363] (--) NVIDIA(0): clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): 155.0 MHz maximum pixel clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): Internal Single Link TMDS
[ 2188.363] (**) NVIDIA(0): TwinView enabled
[ 2188.363] (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Validated modes:
[ 2188.364] (II) NVIDIA(0):
[ 2188.364] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.364] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[ 2188.364] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 2188.364] (--) NVIDIA(0): option
[ 2188.364] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2188.364] (--) Depth 24 pixmap format is 32 bpp
[ 2188.365] (II) NVIDIA(0): Initialized AGP GART.
[ 2188.373] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2188.373] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2188.373] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2188.373] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2188.373] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2188.373] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2188.373] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2188.373] (II) NVIDIA(0): Config Options in the README.
[ 2188.373] (II) NVIDIA(0): Setting mode
[ 2188.373] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.613] (II) Loading extension NV-GLX
[ 2188.657] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2188.659] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2188.659] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2188.659] (==) NVIDIA(0): Backing store disabled
[ 2188.659] (==) NVIDIA(0): Silken mouse enabled
[ 2188.660] (**) NVIDIA(0): DPMS enabled
[ 2188.660] (II) Loading extension NV-CONTROL
[ 2188.661] (II) Loading extension XINERAMA
[ 2188.661] (II) Loading sub module "dri2"
[ 2188.661] (II) LoadModule: "dri2"
[ 2188.661] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2188.661] (II) NVIDIA(0): [DRI2] Setup complete
[ 2188.661] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2188.661] (==) RandR enabled
[ 2188.661] (II) Initializing built-in extension Generic Event Extension
[ 2188.661] (II) Initializing built-in extension SHAPE
[ 2188.661] (II) Initializing built-in extension MIT-SHM
[ 2188.661] (II) Initializing built-in extension XInputExtension
[ 2188.661] (II) Initializing built-in extension XTEST
[ 2188.661] (II) Initializing built-in extension BIG-REQUESTS
[ 2188.661] (II) Initializing built-in extension SYNC
[ 2188.661] (II) Initializing built-in extension XKEYBOARD
[ 2188.661] (II) Initializing built-in extension XC-MISC
[ 2188.661] (II) Initializing built-in extension SECURITY
[ 2188.661] (II) Initializing built-in extension XINERAMA
[ 2188.661] (II) Initializing built-in extension XFIXES
[ 2188.661] (II) Initializing built-in extension RENDER
[ 2188.661] (II) Initializing built-in extension RANDR
[ 2188.661] (II) Initializing built-in extension COMPOSITE
[ 2188.661] (II) Initializing built-in extension DAMAGE
[ 2188.664] (II) Initializing extension GLX
[ 2188.842] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2188.842] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.842] (II) LoadModule: "evdev"
[ 2188.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2188.842] (II) Module evdev: vendor="X.Org Foundation"
[ 2188.842] compiled for 1.8.0, module version = 2.4.0
[ 2188.842] Module class: X.Org XInput Driver
[ 2188.842] ABI class: X.Org XInput driver, version 9.0
[ 2188.842] (**) Power Button: always reports core events
[ 2188.842] (**) Power Button: Device: "/dev/input/event2"
[ 2188.842] (II) Power Button: Found keys
[ 2188.842] (II) Power Button: Configuring as keyboard
[ 2188.842] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.842] (**) Option "xkb_rules" "evdev"
[ 2188.843] (**) Option "xkb_model" "evdev"
[ 2188.843] (**) Option "xkb_layout" "us"
[ 2188.883] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2188.883] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.883] (**) Power Button: always reports core events
[ 2188.883] (**) Power Button: Device: "/dev/input/event1"
[ 2188.883] (II) Power Button: Found keys
[ 2188.883] (II) Power Button: Configuring as keyboard
[ 2188.883] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.883] (**) Option "xkb_rules" "evdev"
[ 2188.883] (**) Option "xkb_model" "evdev"
[ 2188.883] (**) Option "xkb_layout" "us"
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2188.887] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2188.887] (II) No input driver/identifier specified (ignoring)
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
[ 2188.891] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 2188.891] (II) No input driver/identifier specified (ignoring)
Xorg.0.log important (I think):
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
Why is he adding the keyboard 2 times, and why "xkb_layout" "us"? I need hr (croatian).
My first post Sorry, for the bad english.
Last edited by b3no (2010-07-22 23:45:29)

[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
Add this
Section "ServerFlags"
Option "AllowEmptyInput" "no"
EndSection
EditL If the above didn't help, read this http://wiki.archlinux.org/index.php/Xor … d_settings
Last edited by karol (2010-07-22 12:06:04)

IPod Classic not recognized by iTunes, claims to be wiped of all content, and causes computer problems when connected

I have an 80 GB iPod Classic that has suddenly developed severe problems. I'm running iTunes on Windows 7 64 bit.
It was working fine until last night, when I connected it to iTunes to add 6 songs. (Four of these were bought on Amazon.com and 2 ripped from CD's). It accepted the songs and played them fine when connected. When I clicked the icon in iTunes to eject the iPod, it came up with the "OK to Disconnect" and progress bar as usual. However, this time the progress bar didn't start to fill in. It just sat there.
After several minutes the progress bar finally filled in and returned to the menu... but instead of displaying the cover flow on the right side as usual, it showed a gray box with "No Music."
When I tried to re-connect it to my computer, iTunes would not recognize it. My computer also wouldn't recognize it at first... after several minutes, it came up as a generic removable device. Attempting to right-click on it or eject it from Windows was unsuccessful.
The iPod itself displayed "Connected" and alternated the plug image with the spinning arrows. It never said "Synchronizing" as it usually does.
Furthermore, my computer's performance degraded severely while the iPod was plugged in. iTunes itself froze, and even my other applications (such as my web browser) would not work correctly. This all cleared up as soon as I unplugged the iPod. If I tried to initialize iTunes while the iPod was plugged in, it would not open. It opened immediately when I unplugged the iPod.
Finally, despite claiming to have no music or other contents (it had contained only my iTunes music library, which is about 26.5 GB), in Settings the iPod claimed to have only 5.3 GB of free space.
Resetting the iPod with Select/Menu made no change. I was able to put it in diagnostic mode and check the hard drive, which gave these results:
Retracts: 381
Reallocs: 0
Pending Sectors: 10
PowerOn Hours: 417
Smart/Stops: 381
Temp: Current 24c
Temp: Min 15c
Temp: Max 48c
When I put the iPod up to my ear I hear a steady, faint high-pitched sound and an occasional very faint crackling noise. When it shuts down the sound continues for a few seconds, then ends with a kind of squeaking sound.
The iPod is more than 5 years old, so I'm prepared for the probability that it's fried. But I'd like to try everything before I go ahead and spring for a new one.

The iPod's hard drive probably has data corruption. That does not necessarily mean there is a hardware problem. Hard drives, including the ones in computers, can develop data corruption.
Try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, run iTunes on the computer and connect the iPod. To eliminate other potential issues, you should disconnect other USB devices (you can leave standard keyboard/mouse connected), and connect the iPod to a direct USB port on the computer.
iTunes may prompt you to do a Restore, which you should do. This will erase the iPod, re-install its software, and set it to default settings. If the problem was only data corruption, and there is no hardware problems, the iPod should have a "fresh start." You can sync it from your iTunes library.
If the iPod does not go into Disk Mode, or if doing a Restore fails, the iPod's hard drive may be faulty.

Keyboard layout problems in Gnome

I'm not sure if it was a recent upgrade that did it or not, but in gnome my keyboard layout is only half right. I checked the keyboard manager in the gnome menu and it was set to Generic 105 key (INTEL).
In xorg.conf the keyboard is listed as pc105. In KDE the keyboard works normally.

bgodea wrote:I changed the Gnome keyboard layout to "104 key PC" and also tried changing my xorg.conf, but I still have the same problem. In non-graphical and KDE it works fine
You also have to setup a valid layout for this kind of keyboard. That is done in the same dialog field. Then, what do you mean with "tried"? First off, if Gnome and X disagree about keyboard layout, Gnome complains loudly. Thus KDE is unilaterally setting the layout to something it likes. Check your Kconfig to find out what it is. Then find the section named InputDevice in /etc/X11/xorg.conf that looks something like this:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
EndSection
Change it to resemble this example, if it doesn't. Check if your ServerLayout actually uses this InputDevice. Finally, is there anything else we should know about your keyboard? Do you run XGL/AIGLX?
Last edited by Captain Spaulding (2007-04-03 16:50:46)

[E17] lock and keyboard layout problems when suspend

Similar Messages

Maybe you are looking for