E18, google hangouts and virtual desktops

I have a problem after upgrading to e18. When I receive a new message in the google hangouts (chrome extension) the window to change desktops pops up highlighting the desktop with that particular hangout. In e17 it worked all fine. I clicked that desktop, changed to it and the window was gone. In e18, I not only cannot change to the desktop using this window but the window stay forever even if I change manually. Restart helps but this quite annoying. I went through all settings but it did not help. As said, it was all fine in e17

All I can do is suggest filing a bug report at phab.enlightenment.org

Similar Messages

Screen Sharing and Virtual Desktop

Is there a way to force a new remote screen sharing connect to a "Virtual Desktop"?
In my experience, if another user is logged into the computer the new remote screen connection will be forced or given the option to connect to a virtual desktop. This will allow the new connection to run in the "background" without the first connection being influenced.
The issue is when a new remote connection is initiatied and no other connections are active the new connection will be shown on the computer's hardware monitor. i.e. No option is given to connect via a virtual desktop.
This is a security issue because a user can connect remotely and if he is the only connection on the computer he will have all his work shown on the hardware display.
I am hoping to find a way to force all remote connections to be on virtual desktops.

I guess its worth mentioning that although you can indeed screen share from Leopard to Tiger, it only works when you are on the same network. But Remote Desktop works across the internet...
Of course the trick to using Remote Desktop from a truly "remote" location elsewhere on the internet is that you have to be able to reach the IP of the computer you want to control, which can be tricky if its behind a NAT and the person your trying to reach is my Mom who has no idea how to configure her NAT, or firewall, or even find her IP address without my help.
Screen sharing Leopard to Leopard via iChat should be much more straight forward... translation: this will make my life much easier the next time my mom needs help.

Adobe Captivate and Virtual Desktop (citrix)

I have captivate 5 and I'm using it through a virtual desktop in citrix. The problem I have it when I try to start a recording, the application stops responding and closes without leaving any event. The captivate 5 it´s supported for citrix virtual desktop?

Hi there,
It will be helpful if you can give us the following information
1. Has this scenario worked for you when using Captivate 4?
2. What are you trying to Capture? You can let us know the type of application, type of capture setting, and when does it close the application.
3. Apart from recording, are other workflows in Cp 5 working as expected?
-Ashwin Bharghav B

Gdm 2.28.0-1 and virtual desktops

Hi,
Recently updated to gdm 2.28.0-1 and it has a whole new look, and is possibly the cause of a new problem. I run openbox via the openbox session option available in gdm, and I noticed today that my virtual desktops are not what I specified in my rc.xml. Speaking with the openbox developers, I got some specific information:
On the root window, _NET_NUMBER_OF_DESKTOPS has already been set at time of openbox startup, and openbox respects that and does not set a new value from its config. Is this new behavior known/expected? Any way I can get it to stop doing that?
thanks.

I've found some bugs on the issue:
https://bugzilla.redhat.com/show_bug.cgi?id=444135
http://bugzilla.icculus.org/show_bug.cgi?id=4040
Slightly surprised I haven't encountered it until now. I may just ditch gdm, but I sortof like using it - for the odd occasion I want a different session, or I use to shutdown/reboot.

Will UE-V work across Physical and virtual desktops

We are currently evaluating few product, and are looking for a product that can work across our VMWare VDI infrastructure as well as physical hardware to provide transparent and seamless UEM. Profile management is a key for us, the goal is to achieve as
identical as possible experience between out Windows 7 and 8 machines.

UE-V is designed to synchronize data between any desired environments. This includes physical systems, virtual desktops, RemoteApp applications, and App-V applications.
See the Comparing UE-V to other Microsoft products section here.
The ability to synchronize common settings between Windows 7 and Windows 8 was
added in UE-V Beta 2.
Brandon
MDOP on the Springboard Series on TechNet

UCCX 8.02 and Virtual Desktops

Hello,
I see documentation on CAD and recording running on MTS and Xen/App but I have a couple of questions.
1. When they mention MTS, is that supported only in terminal server sessions (RDS) or does that include virtual desktops (Hyper-V)?
2. Is there anything out there being used for virtual desktops for agents?
Any guidance would be appreciated.

To tide you over until a real answer comes long, here is the only document which speaks to CAD in a virtualized environment. Hopefully you haven't already seen this.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/cadenterprise8_0/design/guide/CAD-thin-client.pdf
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

[SOLVED] OpenBox - Transparency and Virtual Desktop Switcher

Hi All
I've just recently, in the last 2 days, switched from Gnome 3.2 to Openbox. I've never really used it before except for a short period on #! as I recall. I've a couple of problems I don't seem to be able to find any answers to and hopefully someone on here already knows how:
1) I'm using Guake dropdown terminal - I don't mind switching to any other terminal if necessary. I can't get transparency to work correctly with it though. I've installed the following to try to resolve the issue:
Cairo Composite Manager
transset-df
If I issue the command:
transset-df -n 'Guake!' &
the Guake terminal sets to transparent which is great. However, as soon as the window retracts and I call it back again the transparency has switched off.
2) I've installed tint2 and it's pretty good. Problem is I can't find a way to get a virtual desktop switcher. Again, this choice isn't cast in stone, I'm quite happy to change to any other application, or set of applications, to achieve the following:
Virtual Desktop Switcher - i like the way pypanel does this actually. I'm happy enough with the mouse wheel switching desktops but I'd like some indication of which desktop I'm on.
Date and Time with a calendar - I've got Orca working quite well on a click on the clock for the calendar.
I would have thought this was pretty simple to resolve really, it's just that i don't know Openbox that well yet and I could use some advice on the best way to resolve the issues.
Thanks in advance
Rich
Last edited by RichAustin (2011-10-23 09:20:13)

I've actually managed to resolve the transparency issue as well.
sudo pacman -S devilspie xcompmgr transset-df
Then in .config/openbox/autostart:
# Start Composite Manager
xcompmgr &
# Start Devilspie to alter windows
devilspie -a &
# Start Main Panel
tint2 &
Finally, create a file in .devilspie called guake.ds with the following content:
(if
(is (window_name) "guake.py" )
(begin
(spawn_sync (str "transset-df -i " (window_xid) " 0.5") )

Cisco NAC and Virtual Desktop Infrastructure

Hi all
Does it posiable to implement NAC on VDI infrastructure?
If it can can you post some link?
THanks
Regards

MosielleKwan wrote:
Has anyone know ESSO support VDI client yet ?The current version does not support virtual desktop infrastructure (VDI).
This must go as an Enhancement Request .

Downloading chrome - how do downloads work on a Mac? I have a Google Hangout in 10 minutes.

I am trying to prepare for a Google Hangout and downloaded Chrome. It downloaded, but now I don't know what to do. I just got my Mac and have not had time to figure this out on my own.
Do I just go to downloads? I tried that the other day with OpenScad and it didn't work.
Can anyone help with the Chrome download? Thanks!

Yes, it'll be in Downloads. There should be a .dmg file which you double-click on to open the image; you should then see the image on your desktop, double-click that to see the installer or the Chrome app itself. If it's the app, just drag it to your Applications folder.
Hangouts should actually work in any browser, as far as I know.
Matt

No RemoteApp, No Virtual Desktop, I just need a connection to computers to work

I am supporting someone who has changed from an SBS 2003 computer to Server 2008 R2 Standard and they want the same functionality that they had with Remote Web Workplace, which is supposed to be doable with RD Web. They don't need RemoteApps and have no
interest in Virtual Desktops. However I just haven't been able to get it up and running and I can't find anything on TechNet or anywhere else that helps since he needs what is considered a non-standard installation. It's a small office. They can't justify
a second computer and don't want to add memory and disk space to make it possible to run a VM, though the
main problem is that they can't live with the downtime it would take for the conversion. For that reason, though Microsoft hates the idea, it needs to work on a DC. Between that and the singular focus Microsoft apparently has on RemoteApps
and Virtual Desktops there is very little anywhere on my problem.
I can get to the RD web web page just fine. An RDP on the RemoteApp page will take me to the server just fine. A remote connection on a Windows 7 client outside of the office lets me connect to the server. But if I choose the Remote Desktop tab on the web
page and enter a computer name that I know is configured to allow remote access and is up and running it will try to connect for a while and then pop up with the (in)famous "Remote Desktop can't connect to the remote computer for one of these reasons:"
message. What's really strange is that this happens even if I enter the server name, the same computer that I successfully connect to using two other methods. I also notice that the resources available to the Windows 7 client that is successfully connecting
to the server only lists 1 desktop.
In addition I keep getting this warning popping up even though I do have the correct server configured as running the RemoteApp service because since I'm only running the one server I'm not running the RD connection broker.
"RD Web Access was unable to contact <servername>, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the name of the server that is specified as running the RemoteApp
and Desktop Connection Management service is entered correctly, and that the server is running and available on the network. Error code: 1722."
I've been working on this for many days now and just can't get this working.

The RD Web Access server and the RD Session Host server are the same computer. The source specified is the internal FQDN name of the server
computername.domain_name.local. I also tried setting it to localhost since it is on the same server and it made no difference. Reading the article you linked to I see that everything on there I have checked and the server is configured properly.
The Remote Desktop Services role is installed with the Remote Desktop Session Host, Remote Desktop Licensing, Remote Desktop Gateway and Remote Desktop Web Access role services installed.
The Best Practices Analyzer keeps showing that the RD Gateway server is not configured to use a valid SSL certificate even though I do have a third party SSL certificate properly installed. It also says that the Remote Desktop Users group on the RD Session
Host server needs to contain domain users even though it already does have them.
As I said in my original post it seems very strange that I can successfully connect to the server using two different methods but the method of going to the Remote Desktop tab on the RD Web main page and entering the server name doesn't work.

Microphone auto adjust while using google Hangout,

Hi,
While using Google Hangout the micrphone adjust itself, there is an option within Skype to stop it, but couldn't find it in Google Hangout, and it does it also when recording the sound, which lead me to believe it is Als/pulse related.
Is there any option to disable it?
Looking forward for your reply,
Regards,

Right,
After searching the web a little bit more - actually quite easy to fine - but I was trying hangout for the first time.
I found that solution, I haven't tested it yet; so if you do please let us know if it work.
To turn off the auto adjust:
cd ~/.config/google-googletalkplugin # get to google chat's directory
cp -p options options.bak # make a backup before changing stuff !
gedit options # edit the config file
now change one of the lines so that it reads as follows:
audio-flags=1
Now restart you machine and google chat will no longer auto-adjust!!!
Remember to go to PulseAudio volume control just to make sure the left channel stays at 0
Found here => http://productforums.google.com/forum/# … 1cpJq1mC8U

Thunderbolt camera stopped working with Skype and Google Hangouts

Some time ago my built in camera on the thunderbolt stopped working with Skype. If I activate the camera the green light turns on but the screen either remains black or it shows that spinning loading incon forever. The green light stays on indicating the camera is active no matter what I do with skype even if I press the button to deactivate the camera. The green light remains on until you completely kill skype. Rebooting, reinstalling skype, etc. does nothing.
Today I disocvered I have the same thing with Google hangouts. All the way around exactly the same and the green light won't turn off until you kill the web browser. Same thing with FireFox or Safari. Also it no longer works on Viber either.
It's quite infuriating.
I am not sure if this has anything to do with this awful virus like program called "CamTwist" that I installed once and had a very difficult time removing or not.
Reinstalling OS X from scratch is not an option. Too much work, too many programs to reinstall and reconfigure etc.
How can I get my camera back?
The camera works just fine with Photobooth and facetime.
Thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1250 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 225 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%d MB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[6]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|Goog|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} Trust\ settings );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 77 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Dell Precision T5810 Core options and GPU config? Running CC on virtual desktops?

Hi, two questions really but didn't want to start multiple threads.
I tried searching for answers to my questions but was not very successful so am trying to post. I am looking at buying some computers for our office which will be using the CC subscription for their workflow. Predominately this is short form video editing on Premiere (3-10min, AVCHD & DSLR mix, 2-3 camera steams, 50/50 just as straight streams/multicam), some light to mid graphics on After Effect and Photoshop then compression through Media Encoder.
Our media will be stored on a Small Tree shared storage server across a dedicated gigabit network.
As Dell have just launch their new workstations using the new version of the Xeon 16 series with DDR4 RAM I was thinking of going down that road. Would I be better getting the Hex Core 1650v3, 500GB HDD, 16GB DDR4 2133 RAM with either a Quadro K2200 or Firepro W5100, or Quad Core 1620v3, 500GB HDD, 16GB DDR4 2133 RAM with Quadro K4200?
As I understand it is important make sure systems are balanced between CPU, GPU, RAM and discs. Which of the above configs would perform better for our work, as I am not sure if the hex core will be more so with a lower GPU, or if the quad with a faster/more expensive GPU will perform better?
I know when it comes to GPU's a kick off would be to say ditch the workstation line for a GTX to save money, but we have a business deal with Dell as a business their 3 year support is an important consideration to us something they do not support if we chop and change out unsupported components such as a GTX card.
The other option I have been made by our IT department is that we could buy Dell servers, add graphics cards and run virtual desktops for the editors on them instead of buying stand alone towers. I have not really seen this being done before for video editing which suggests to me that this does not work for one reason or another, but I have not been able to find out much with my Google-fu (which again is probably a bad sign). Is this as bad an idea as I am assuming or is this a potential avenue.
Hopefully that has all made sense and apologies if I have not followed any forum etiquette, (first time so be kind!)
Thanks in advance for all and any help.
Ed

Hi,
Thank you for the replies. Having looked at the virtual option more closely I have discounted it as an option. Was never really something I wanted but our IT insisted I evaluated it as part of the process.
Regarding the workstations I had decided to go with the hex core E5 1650 option so it is good to hear I am heading down the right road! My reasoning for look at the new T5810 (DDR4 RAM) over the previous T3610 which had the 1650v2 (DDR3 RAM) was based on the fact the the cost difference on the website was only about 70-80 pounds. For that little difference it seemed like a good idea to buy the latest offering for future proofing. I will however get Dell to quote me for the two systems and see what the end result is after adding in 32GB of RAM.
I will also speak to them about their warranty as I was under the impression that by putting a non approved card in the system that if there were issues that involved the card in anyway then they would not assist. Either way I had decided to go Nvidia after reading up about the Firepro computability. Sadly I don't think I would have budget for the K4200 but the K2200 looks like it might be a decent performer as it is based on the maxwell architecture so I would expect it punch a bit above its weight. Would this act as the bottle neck in such a system or would it be fast enough to balance out a E5 1650 and 32GB RAM?
If it is only the card itself that will not be supported then I guess this is lesser risk and I could consider a consumer card. If I did go down the GTX route then looking at the price of GTX 770 (ideally I would want the 4GB version as the 2GB could be limiting for the future), there does not seem to be a lot in it between them and the GTX970. I would expect due to the maxwell architecture that this would offer better performance at a lower power draw so I would expect the be better temps than the previous gen. If so then would this be a better option to go for?
For drives I will look at putting the media cache onto separate drives (we currently do this with our systems that run local storage), though will probably have to be HDD rather than SDD as I have them spare and fast running out of budget!
Thanks again for all comments.

How to delete Ubuntu virtual desktop and free up allocated space in windows 8?

I have tried out Hyper-V for the first time to install Ubuntu desktop. During the installation process, 10GB of space is allocated. I believe this space would have been created as a separate partition and formatted
to linux file system. Please correct me if I am wrong.
Now I would like to remove the Ubuntu virtual desktop and free up the allocated space. I have deleted the desktop from the Hyper-V manager. Is this sufficient to free up the space?
Disk partition tool shows following partitions
Volume
Layout
Type
FS
Status
Capacity
Free
Volume (C;) Simple
Basic NTFS
Healthy(Boot, Page File ...) 218GB
8GB
Volume <nolabel> Simple
Basic Healthy(Recovery Partition)
450MB 450MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
350MB
350MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
10.5GB
10.5GB
Volume <nolabel>
Simple
Basic
Healthy(EFI
System Partition)
260MB
260MB
Volume <nolabel>
Simple
Basic
Healthy(Primary
Partition)
8GB
8GB
I am not sure of the unnamed, unused volume. Hence I listed all.
However Diskpart tool in command prompt does not show the last one [ 8gb]. Does this mean if this was allocated
to Virtual desktop? Please help

You must delete the VHDx that you created when you created the VM.
This is the virtual disk that Ubuntu was installed into - you will not see this as a volume, you will see this as a VHDx file.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

E18, google hangouts and virtual desktops

Similar Messages

Maybe you are looking for