E18 - "Your display server does not support XComposite..."
I used e17 quite a bit, but since it was upgraded to e18, I've run into this problem.
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00004 [0.00004] - Signal Trap
ESTART: 0.00004 [0.00000] - Signal Trap Done
ESTART: 0.00005 [0.00001] - Eina Init
ESTART: 0.00019 [0.00013] - Eina Init Done
ESTART: 0.00019 [0.00000] - Determine Prefix
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:25^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:26^[[0m Enlightenment relocation handling
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:27^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:28^[[0m PREFIX: /usr
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:29^[[0m BINDIR: /usr/bin
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:30^[[0m LIBDIR: /usr/lib
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:31^[[0m DATADIR: /usr/share/enlightenment
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:32^[[0m LOCALE: /usr/share/locale
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:33^[[0m =================================
ESTART: 0.00027 [0.00009] - Determine Prefix Done
ESTART: 0.00034 [0.00007] - Environment Variables
ESTART: 0.00036 [0.00001] - Environment Variables Done
ESTART: 0.00036 [0.00000] - Parse Arguments
ESTART: 0.00037 [0.00001] - Parse Arguments Done
ESTART: 0.00037 [0.00001] - Eet Init
ESTART: 0.00163 [0.00126] - Eet Init Done
ESTART: 0.00164 [0.00001] - Ecore Init
ESTART: 0.00512 [0.00348] - Ecore Init Done
ESTART: 0.00514 [0.00001] - EIO Init
ESTART: 0.00516 [0.00002] - EIO Init Done
ESTART: 0.00517 [0.00001] - Ecore Event Handlers
ESTART: 0.00517 [0.00001] - Ecore Event Handlers Done
ESTART: 0.00518 [0.00000] - Ecore_File Init
ESTART: 0.00566 [0.00049] - Ecore_File Init Done
ESTART: 0.00567 [0.00001] - Ecore_Con Init
ESTART: 0.00567 [0.00000] - Ecore_Con Init Done
ESTART: 0.00568 [0.00000] - Ecore_Ipc Init
ESTART: 0.00569 [0.00001] - Ecore_Ipc Init Done
ESTART: 0.00569 [0.00001] - Ecore_X Init
ESTART: 0.00958 [0.00388] - Ecore_X Init Done
ESTART: 0.00959 [0.00002] - Ecore_Evas Init
ESTART: 0.00978 [0.00018] - Ecore_Evas Init Done
ESTART: 0.00978 [0.00001] - Elementary Init
ESTART: 0.01301 [0.00323] - Elementary Init Done
ESTART: 0.01302 [0.00001] - Emotion Init
ESTART: 0.01645 [0.00344] - Emotion Init Done
ESTART: 0.01646 [0.00001] - Ecore_Evas Engine Check
ESTART: 0.01647 [0.00001] - Ecore_Evas Engine Check Done
ESTART: 0.01648 [0.00000] - Edje Init
ESTART: 0.01648 [0.00001] - Edje Init Done
ESTART: 0.01649 [0.00001] - E Intl Init
ESTART: 0.01650 [0.00002] - E Intl Init Done
ESTART: 0.01651 [0.00001] - E_Alert Init
ESTART: 0.01651 [0.00000] - E_Alert Init Done
ESTART: 0.01652 [0.00000] - E_Hints Init
ESTART: 0.01683 [0.00031] - E_Hints Init Done
ESTART: 0.01683 [0.00001] - E_Configure Init
ESTART: 0.01687 [0.00003] - E_Configure Init Done
ESTART: 0.01687 [0.00000] - E Directories Init
ESTART: 0.01695 [0.00008] - E Directories Init Done
ESTART: 0.01696 [0.00001] - E_Filereg Init
ESTART: 0.01696 [0.00001] - E_Filereg Init Done
ESTART: 0.01696 [0.00000] - E_Config Init
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1223^[[0m Performing config upgrade for 1.12
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1244^[[0m Performing config upgrade for 1.13
ESTART: 0.01766 [0.00070] - E_Config Init Done
ESTART: 0.01767 [0.00001] - E_Randr Init
E_RANDR CONFIG RESTORE
Calculated Screen Size: 1920 1080
ESTART: 0.01850 [0.00083] - E_Randr Init Done
ESTART: 0.01850 [0.00001] - E_Xinerama Init
ESTART: 0.01851 [0.00001] - E_Xinerama Init Done
ESTART: 0.01851 [0.00000] - E_Env Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01853 [0.00001] - E_Scale Init Done
ESTART: 0.01854 [0.00000] - E_Pointer Init
ESTART: 0.01854 [0.00001] - E_Pointer Init Done
ESTART: 0.01855 [0.00001] - E Paths Init
ESTART: 0.01856 [0.00001] - E Paths Init Done
ESTART: 0.01857 [0.00001] - E_Ipc Init
ESTART: 0.01864 [0.00007] - E_Ipc Init Done
ESTART: 0.01864 [0.00001] - E_Font Init
ESTART: 0.01865 [0.00001] - E_Font Init Done
ESTART: 0.01865 [0.00000] - E_Font Apply
ESTART: 0.01866 [0.00001] - E_Font Apply Done
ESTART: 0.01866 [0.00000] - E_Canvas Recache
ESTART: 0.01867 [0.00001] - E_Canvas Recache Done
ESTART: 0.01868 [0.00000] - E_Theme Init
ESTART: 0.01870 [0.00002] - E_Theme Init Done
ESTART: 0.01870 [0.00001] - E_Moveresize Init
ESTART: 0.01871 [0.00001] - E_Moveresize Init Done
ESTART: 0.01871 [0.00000] - Efreet Init
ESTART: 0.01980 [0.00109] - Efreet Init Done
ESTART: 0.01981 [0.00001] - E_Intl Post Init
ESTART: 0.02764 [0.00783] - E_Intl Post Init Done
ESTART: 0.02766 [0.00002] - E_Actions Init
ESTART: 0.02800 [0.00034] - E_Actions Init Done
ESTART: 0.02801 [0.00001] - Screens Init
ESTART: 0.02801 [0.00001] - screens: atoms
ESTART: 0.02820 [0.00019] - screens: manager
ESTART: 0.02822 [0.00002] - screens: container
ESTART: 0.02823 [0.00001] - screens: zone
ESTART: 0.02824 [0.00001] - screens: desk
ESTART: 0.02824 [0.00001] - screens: menu
ESTART: 0.02826 [0.00002] - screens: exehist
ESTART: 0.02827 [0.00001] - screens: get roots
ESTART: 0.02828 [0.00001] - screens: focus
ESTART: 0.02828 [0.00001] - screens: border
ESTART: 0.02830 [0.00002] - E_Comp Init
<<<< Enlightenment Error >>>>
Your display server does not support XComposite, or Ecore-X was built without XComposite support. Note that for composite support you will also need XRender and XFixes support in X11 and Ecore.
<<<< Enlightenment Error >>>>
Enlightenment cannot setup compositing.
E18: Begin Shutdown Procedure!
^[[31mERR<^[[0mefreet_cache^[[31m>^[[0mlib/efreet/efreet_cache.c:1108^[[0m org.enlightenment.DBus.Canceled Canceled by user.
E - PID=849, valgrind=0
Apparently ever since they upgraded from e17 to e18, they now require XComposite. I'm using the default package through pacman. Pacman installed all the required packages it apparently needs. I've tried uninstalling e18 completely and reinstalling which didn't work. When I do a pacman search for XComposite, E-core-X and XRender, the updated libraries show up.
Do I need to build every package from scratch just to get this to work? Or is there an easier way? I tried googling the problem, but only four sites came up with three being .c code. The other didn't offer any real help.
Thank you in advance for any help.
Scimmia wrote:hmm, 1.9.3-1 was just released, but 1.9.2-1 should work just fine. Anything custom in your X setup? How about trying a clean configuration (rename ~/.e and let E recreate it)?
There's nothing custom in my X setup. I've tried deleting the .e folder but still no luck. I'm not sure if it helps, but here's my xorg.conf file. I'm also using the closed source NVIDIA drivers if that matters.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VE258"
HorizSync 24.0 - 83.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VW224"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x90$
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Similar Messages
-
Solution: blue ray ERROR Your display environment does not support protected content playback
I have a solution for this problem for those of you using NVIDIA display adaptors:
Control Panel > Appearance and Personalization > Display > Screen Resolution > Advanced Settings >
Start the NVIDIA Control Panel
in Display > Setup multiple displays
Right click the displays and select "Extend Desktop on this display"
This will allow you to play the blue ray disk.
Basically the DRM logic is blocking the output on multiple displays due to SONY's stalinesque control freakery.
This is a lesson as to why one should never buy SONY based technologies.I found that the display driver had been changed by a remote control program to something other than monitor.sys.. once I replaced this file everything worked fine.
Control Panel - Display - screen resolution - advanced settings - Monitor - Properties - Driver - Driver Details... should read... Monitor.sys
Monitor.sys should be found under c:\windows\system32\drivers\monitor.sys.
This worked for me...
Hope it helps... someone... I have been searching for an answer for weeks...
Scott Adderson -
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
Server does not support: RFC 567456 see CVE-2009-3555
I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
All assistance appreciated. DanThat message is meant for webmasters to make them aware that they need to fix their servers.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See also https://wiki.mozilla.org/Security:Renegotiation
'''Update Adobe Reader (Adobe PDF Plug-In)'''
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**'''Note: plugin check does ont have information to check all versions of all plugins'''
*'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
Updating Adobe Reader:
#From within your existing Adobe Reader:
#*Open the Adobe Reader program from your Programs list
#*Click Help > Check for Updates
#Download complete installer:
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#*Click "Save to File"; save to your desktop
#*After download completes, close Firefox
#*Click the installer you just downloaded and allow the install to continue
#**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#After the installation, start Firefox and check your version again. -
What does this mean in lay terms: server does not support RFC 5746, see CVE-2009-3555
This error turns up sometimes most of the time associated with another message that says that the 'server timeout.'
'''''"server does not support RFC 5746, see CVE-2009-3555"'''''<br />
That message is meant for webmasters to make them aware that they need to fix their servers. Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See: https://wiki.mozilla.org/Security:Renegotiation
<br />
You have an item installed that is considered malware/spyware/adware, "My Web Search Plugin Stub". This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
#You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
#*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
#*See:
#**http://www.safer-networking.com/removemywebsearch.php
#**[http://www.pchell.com/support/mywebsearch.shtml|PC Hell: My Web Search Removal Instructions]
#**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
#You '''MAY''' need to change a preference to reset your default URL/location bar search provider:
#*Enter '''about:config''' in the address/URL bar and press the Enter key
#*If you see a warning, accept it (Promise that you will be careful)
#*Filter = keyword.URL
#*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
#*Restart Firefox (File > Restart Firefox)
#*See: http://kb.mozillazine.org/Keyword.url
#You '''MAY''' need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
#*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
<br />
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
*Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox -
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab AllemanHi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
Server does not support remote front panels
hello
I'm about to command the front of my labview program remotely. I followed all the steps that I found on the NI website. when I do the test on my Intenet Explorer browser it gives me the following mesage: "Server does not support remote front panels".
I await your propostion and solutions. SincerelyHi,
This KB might help.
Christian -
Server does not support RFC 5746, see CVE-2009-3555
When accessing option: "Personal Banking" at "www.onlinesbi.com" Firefox 3.6.8 crashes. ERROR CONSOLE displays "www.onlinesbi.com : server does not support RFC 5746, see CVE-2009-3555". OS: Windows Vista Home Premium SP-2.
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation -
Server does not support PLAIN or LOGIN authentication
I try to send mail via XI Mail adapter. My settings are below
Transport protocol : SMTP
Message protocol : XIPAYLOAD
url : smtp://10.44...
Authentication Method : Plain
User : ...
Password...
From :
To : ....
But i give this error "server does not support PLAIN or LOGIN authentication"..
I think I use SSL or something else, but I dont know how to do by using Mail adapter..
Or Why do i get this error ?
ThanksHello Tuncer,
In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
Hope this helps,
Regards / selamlar
Gökhan -
Error message when uploading: my server does not support byte-range requests
Hi I am trying to get a pocast up on itunes - I am first just sending a test mp3 - ebenezer.bruceclark.eu/podcast.xml. I have validated the xml keeping it to a minimum and constantly get the message saying my server does not support byte-range requests. Once I got some meassage about "White spaces are required between publicId and systemId". It all seems so random I am using Drupal 7 cms with views_rss module + itunes elements. It's been my 3rd night into the early morning and I need to sort this out for my client.
Thanks to anyone who can help
BruceYour feed does not contain an 'enclosure tag' which would contain the URL of your mp3 file, so at the moment it basically has no content and would be of no use to iTunes. You may find it helpful to read this page which gives you basic information on making a podcast:
http://rfwilmut.net/pc
Note that when you do get it working and submitting, the iTunes Store won't accept a podcast which is merely a technical test: they need to see at least one proper episode so that they can check that your podcast does not contain unsuitable material. -
Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I try to login to my web account and I get this message "Server Does Not Support RFC 5746/ CVE-2009-3555"
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See http://wiki.mozilla.org/Security:Renegotiation -
i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation -
Hi,
We are using EP6 SP17 with the BP of SRM 4.
in the Shop iView -> MASTER_CATALOG, we get an error saying: :This server does not support HTTPS! It is therefore potentially unsafe to send your password".
Even after sending the user& password we are unable to access the catalog.
Does anyone encountered this problem? Does anyone have a solution for this?
Thanks in advance,
AviadHi,
Pls refer the foll link:
/people/gregor.wolf3/blog/2005/10/11/setup-https-ssl-for-the-sneak-preview-sap-netweaver-04-abap-edition-on-windows
BR,
Disha.
PLs reward points for useful answers.
Maybe you are looking for
-
Material Replication filtering problem
Dear Experts, we are working on SRM 5.0 Server 5.5 and we are facing following problem during material replication and delta download replication. After making all steps related customizing objects alignment between R/3 and SRM, we putted the filter
-
How to get deleted programs in the start menu?
Hi, I foolishly deleted (by accident) my all programs folder on the start menu. This has emptied the programs folder on the start menu through windows explorer as well. I still have access to all of my programs by searching for them or by going throu
-
What kind of audio filter would i use.
i need an audio filter that will bring out a distant clapping noise thats you cant even hear during playback. i have raised the dB as high as possible. is there a way to get it heard at all?
-
My video also shows up under music...
I just bought The Waterboy and it shows up under videos just fine and it works and everything but if I go to music I can turn it on in music folder it plays as if it is a music file I can watch it in both sideways modes and the normal mode which is a
-
Certificate authentification failed
I need help i have adobe reader 9 on my computer trying to update i get an error message certificate authentification failed, what do i need to do to update can some one help me.