E1EDP35 producing more than 1 segment mapping

Dear All,
i have a mapping problem with field /ns0:MT_PostOrder/HEADER/*_REF_DOCNUM_** in the following segment E1EDP35.
The field muss beproducing more then 1 when have for example 2 Item, the field REF_DOCNUM_** muss be produced two time in the different position.
kindly could you help me!
I would appreciate the input.
Thanks in advance.
Best regards.

hi
Ghislain
can u explain your problem clearly. As per i understand u have machine<b>s</b> that produce 3 parts at a time.
for example:
3 machines m/c that produce same kind of product with same process.
then
your formula will be : <b>setup time / operation splits</b>
that setup time for 3 m/c is 20 min
then : 20 / 3 is ur set up for one m/c
but when u maintain setup time you give total time ( 20 min )
problem solve or not solve plz reply.
thanx
sunil jawalkar

Similar Messages

Embedding more than one google map in a tabbed panel

Hi, I wonder if anyone knows if this is possible. I am building google maps in business catalyst and what I want to do is add multiple maps into my muse site. For example, restaurants on one map, coffee shops on another, local produce on another. Does anyone know if this is possible? Each time I try and enter the snippet of code I get to add to muse from business catalyst it is fine if I just enter on blank page, but when I try and enter the html in the tabbed panel it doesnt work. Does anyone know of a solution ? I would really appreciate any feedback, Michele

Strange to be the first to reply to my own question but here goes, it may help someone with similar woes. I had been following the wiring colour code stringently. That being GREEN=FRONT, BLACK=REAR and ORANGE=SUBWOOF/CENTRE.
After clicking the Universal audio jack button on the realtek sound manager C.P and manually setting the blue port to be rear I took the Jack for my rear channels that had been in the BLACK port, and plugged it to the BLUE. I then tested all the speakers and "VOILA" every speaker channel works.
Im somewhere between NOOB and have to fix all my familys PC problems because they know even less than I do. Not sure what that makes me, a bit of a chancer probably, who gets lucky more than anything, anyway I can only guess that there is a problem with the onboard "BLACK" port. In saying that I have just came from a 2.1 setup for front and built in flat panel srs monitor speakers for rear, all this was setup as quadrophonic and as I recall the Black port worked fine whenever I used it as the rear channel. So anyway its working, Im not sweating too much about the whys and how comes. I am a little concerned about the 6700 reputation for a certain volume controller inner part burning out (TRANSISTOR)? I think is the culprit. Anyway I will deal with that if and when the time arises. Only 2 months left on my warranty and my speakers have been sat doing nothing for over 6 months maybe more so I should get some life out of them, fingers crossed.

GLT2 201 in VF02 With More Than One Segment

Dears,
Itu2019s occurring the following error message when trying to post the accounting document for sales billing with multiple items with different segments, transaction VF02: u201CGLT2201 u2013 Balancing field "Segment" in line item 001 not filledu201D.
The error does not occurs if the sales billing have only one item, nether if the items have more than one item but with the same segment.
Item 001 for accounting document of SD billing usually is the customer account
The accounting document splitting is active for the characteristic Segment, and it's a a mandatory and balance zero accounting assignmet field.
Some one knows how to fill up the Segment for accounting document of SD billing with more then one segment ??
Any help is wellcome.
Roger Aquino

Dears,
The error has being solved!
The problem was the configuration of SD accounts determination.
After the SD team customize the right accounts for accounting (until then they had defined any accounting records), the error was suppressed.
Thanks.
Roger Aquino.

How do I get the statistics express to read more than 10 segments when reading from a .lvm

I have tried 2 ways of doing this. I had an for loop set up with a "Read labVIEW Measurement FIle" then a xy chart to plot the 2 measurements vs. each other. The chart works and will plot everything great but the "Statistics" express will only take 10 samples at a time and will keep redoing the statistics for each subsequent segment of 10 samples. I tried to change this to a while loop but then the same thing happens with the stats and the xy chart does not graph. How do I get the stats calculate for the entire file?

Richard,
Thank you for contacting National Instruments. I think I understand what you are looking to do here, but it might be easiest for myself and others to help you more specifically if you post a screenshot of your code, or your actual VI. However, I looked into trying to achieve something similar, and used a loop structure to bring the information in from a file. Then, outside the loop, I used the Statistics Express VI from the Mathematics palette to obtain some statistical values. What type of statistics are you looking to receive from this program?
Jason W.
National Instruments
Applications Engineer

Export to Excel will not produce more than 2000 rows

I am trying to export a sharepoint list to excel that has around 8000 items in it, however when it does...i'm only able to see 2000 entries and the other 6000 are missing.
I'm working with SharePoint 2013 Enterprise and Excel 2013.
Would anyone have some help to offer me on why this is no producting all of the entries in the list?

Hi Jacob,
According to your description, my understanding is that only 2000 items can be exported to excel in SharePoint list.
I recommend to check if there are any indexed columns(which are enforced to have unique values) in the list.
If yes, please remove the indexes from the columns in the list to see if the issue still occurs.
For test, please export another large list to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

More than 1 map

Hi all..can we save more than 1 nokia maps on the M-card? or only 1 country,,for example if i wanna go from paris to wien,,what i must do?

i have maploader v 2,,when i conet my mobile by USB to PC,,and start the maploader..it shows me only voices,,no maps,,and down on the right there is delet maps,, so i instualated older version maploadr ,,it shows me the maps but not the voice..i deleted all maps,,and then i download the new maps,,but,,still nothing..they r saved on my M-card,,but when i wanna plan my rout from my city to another city in another country,,the program alone exit??
iam getting mad

Using a ommand to generate more than one row of data in utl file

Hi Guys
This might be a pretty long one. But I require help with regards to using outer and inner loops within my code.
Here is the task:
Each account involved with the DCA Allocation has an entry in the DCAACCOUNTALLOCATION table to track its progress. The STATUS value of the entry shows the position of the account in the DCA Allocation process.
The status entry being tested is 3.
Below is the code:
create or replace
PROCEDURE DCA_BMW_OUT
IS
-- Declare all variables as reference
v_out_file UTL_FILE.FILE_TYPE;
v_row_Count NUMBER;
r_bmw NUMBER;
v_out_directory all_directories.directory_path%type;
v_out_filehandle UTL_FILE.FILE_TYPE := NULL;
v_out_buffer varchar2 (32767);
v_records NUMBER;
body_output varchar2(32759 BYTE);
dictionary_guarantorsexist varchar2 (1 Char);
-- Text required within this part of the procedure
v_body varchar2(32767 BYTE);
v_header VARCHAR2(32759 BYTE);
BEGIN
FOR r_bmw IN
( SELECT *
FROM dcaadditionaldata
WHERE directory_name IS NOT NULL
) LOOP
BEGIN
-- Output file to be added into the directory specified
v_out_file := utl_file.fopen (r_bmw.directory_name, 'DCAExport_1_' || TRIM(TO_CHAR(SYSDATE,'DDMMYYYY_HH24MISS')) || '.txt', 'W');
-- The Header data which will be outputted to the file
v_header := 'KennzeichenBrgschaftsforderungGesamtforderung|Währung|Übergabedatum|DifferenzierungAnwalts-oderInkassofall|MainMarktpartnernummer|
MainAnrede|MainTitel|MainName|MainVorname|MainStraße|MainHausnummer|MainPLZ|MainOrt|MainLand|MainGeburtsdatum|MainTelefonnr.Schuldner|G1Marktpartnernummer
G1Anrede G1Titel G1Name G1Vorname G1Straße G1Hausnummer G1PLZ G1Ort G1Land G1Geburtsdatum G1Telefonnr.Schuldner G2Marktpartnernummer G2Anrede G2Titel
G2Name|G2Vorname|G2Straße|G2Hausnummer|G2PLZ|G2Ort|G2Land|G2Geburtsdatum|G2Telefonnr.Schuldner|G3Marktpartnernummer|G3Anrede|G3Titel|G3Name|G3Vorname|
G3Straße|G3Hausnummer|G3PLZ|G3Ort|G3Land|G3Geburtsdatum|G3Telefonnr.Schuldner|G4Marktpartnernummer|G4Anrede|G4Titel|G4Name|G4Vorname|G4Straße|G4Hausnummer|
G4PLZ|G4Ort|G4Land|G4Geburtsdatum|G4Telefonnr Schuldner|G5Marktpartnernummer|G5Anrede|G5Titel|G5Name|G5Vorname|G5Straße|G5Hausnummer|G5PLZ|G5Ort|G5Land|
G5Geburtsdatum|G5Telefonnr.Schuldner|Kundennr.|Bestandsnr.|Finanzierungsnr.|KennzeichenFinanzierung/Leasing|Kennzeichenprivat/gewerblich|
reguläresVertragsende|Laufzeit|Vertragsdatum|Vertragsstatus|Ratenbetrag|Filiale/Gebiet|Finanzierungstyp|BankverbindungKonto|BankverbindungBLZ|
RSVKennzeichen|Kündigungsdatum|Modell|Fahrgestellnummer|KFZKennzeichen|KFZZulassungsdatum|CoD1Marktpartnernummer|CoD1Anrede|CoD1Titel|CoD1Name|
CoD1Vorname|CoD1Straße|CoD1Hausnummer|CoD1PLZ|CoD1Ort|CoD1Land|CoD1Geburtsdatum|CoD1Telefonnr.Schuldner|CoD2Marktpartnernummer|CoD2Anrede|CoD2Titel|
CoD2Name|CoD2Vorname|CoD2Straße|CoD2Hausnummer|CoD2PLZ|CoD2Ort|CoD2Land|CoD2Geburtsdatum|CoD2Telefonnr.Schuldner|CoD3Marktpartnernummer|CoD3Anrede|
CoD3Titel|CoD3Name|CoD3Vorname|CoD3Straße|CoD3Hausnummer|CoD3PLZ|CoD3Ort|CoD3Land|CoD3Geburtsdatum|CoD3Telefonnr.Schuldner|CoD4Marktpartnernummer|
CoD4Anrede|CoD4Titel|CoD4Name|CoD4Vorname|CoD4Straße|CoD4Hausnummer|CoD4PLZ|CoD4Ort|CoD4Land|CoD4Geburtsdatum|CoD4Telefonnr.Schuldner|
CoD5Marktpartnernummer|CoD5Anrede|CoD5Titel|CoD5Name|CoD5Vorname|CoD5Straße|CoD5Hausnummer|CoD5PLZ|CoD5Ort|CoD5Land|CoD5Geburtsdatum|
CoD5Telefonnr.Schuldner Y|Y|5830,99|EUR|20/08/2009|DCA|4|123456|Herr||Mueller|Rainer|Messigasse|33|84432|Filz|Deutschland|01/07/1957|08912345|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||||||||||||||76543|5000234567||Lease|Privat|12/12/2013|60|12/12/2008||250,50|US|Rate|1234567890|32343450|N||BMW 320 i|W34567890PA34567|M-H-3456|09/12/2008||||||||||||||||||||||||
N|450,80|EUR|20/08/2009|DCA|4|987654|Frau||Meier|Heide|Beinstr.|44|86353|Laus|Deutschland|03/06/1949|08987654|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||87654||8765675585|Loan|Gewerblich|14/03/2012|72|14/03/2006||500,01|DF|Select|976579657|32343450|N||BMW 500 sl|W94567890PA34568|M-H-3457|10/03/2006|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345
Y|33970,50|EUR|20/08/2009|Lawyer|4|64646464|Frau||Schmidt|Susanne|Hueftgasse|55|89363|Maus|Deutschland|23/08/1933|08934567|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||98757|5000785675||Lease|Privat|11/11/2009|48|11/11/2005||380,70|GH|Zielrate|234567899|32343450|Y||BMW 380 s|W54567890PA34569|M-H-3458|07/11/2005||||||||||||||||||||||||
N|10040,20|EUR|20/08/2009|Lawyer|4|4865465|Herr||Schulz|Karl|Nasenweg|77|83354|Schuh|Deutschland|18/01/1965|08972545|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||46789|50004765787||Lease|Privat|16/09/2012|60|16/09/2007||1234,56|OS|ZUS|98765432|32343450|Y||BMW 280 i|W74567890PA34570|M-H-3459|12/09/2007||||||||||||||||||||||||';
utl_file.PUT_LINE(v_out_file,v_header,TRUE);
-- Below will output a row of data which satisfy the requirements.
FOR body_output IN
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 3
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
LOOP
UTL_FILE.PUT_LINE (v_out_file,
body_output.CUSTOMERNUMBER|| '|' || body_output.ACCOUNTNUMBER|| '|' ||body_output.CDTITLE|| '||' ||body_output.CDFIRSTNAME || '|||||' ||
body_output.CDLASTNAME|| '||||' || body_output.ACCOUNTTYPE|| '|' ||body_output.ORIGINALCONTRACTENDDATE|| '||||' ||body_output.CONTRACTTERM || '|||||' ||
body_output.CONTRACTENDDATE|| '|' || body_output.BRANCHAREA|| '||' ||body_output.PRODUCTTYPE|| '||' ||
body_output.HOUSEBANKACCOUNT|| '|||' || body_output.CARMODEL|| '||||' ||body_output.CARLICENCE|| '|' ||
body_output.ARREARSBALANCE|| '||||' || body_output.CODEBTOR|| '|' ||body_output.GUARANTORnumber);
END LOOP;
UTL_FILE.fclose (v_out_file);
EXCEPTION
WHEN OTHERS THEN
UTL_FILE.put_line (v_out_file, 'failed');
-- If any errors occur when closing the file, then we close the opened file.
IF utl_file.is_open(v_out_file) THEN
UTL_FILE.fclose (v_out_file);
END IF;
END;
UPDATE DebtEpisodes
SET handoverdate = null
WHERE DCAORLAWYER = 'DCA'
AND accountid IN
( SELECT accountid
FROM Dcaaccountallocation
WHERE Dcaaccountallocation.status = 3
AND Dcaaccountallocation.dcaid = 41
END LOOP;
END DCA_BMW_OUT;
Currently, the above codes issue is that although many rows of data have been inputted in all the tables, with regards to the select criteria above (in italics), it only produces one row of data when i expect more than one to appear.
If the query only outputs one row but you're expecting it to produce more than one row, then you need to dissect the statement to find out where the output is being unduly restricted
I was told maybe an outerloop or an inner loop would do the trick, but really stuck on how and where to put it.
Hope this makes sense guys and I would really appreciate your time.
Thanks

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

Can I use more than one html5/js animation produced with Flash/createjs in a website?

Hi, I am producing some animations with Flash that will be delivered in html5/js trough createjs. The trouble is that, after including the first animation in my html website, the rest of the animations are overwriting with the first one, therefore, if I attemp to insert a second animation in my website, it will actually replace the first animation I already had placed...
I have already tried the following:
- change the default canvasID for another one
- change the resources and Javascript name spaces in Createjs export settings
- change manually the name of the functions (lib, img, cjs) in the Javacript file
None of these seem to fix the problem. So, I am now wondering if is actually possible to insert more than one animation in a website....
I would really appreciate a quick answer, as I am working on a project with a very tight timing, and really need to sort this out a.s.a.p.
Thank you very much in advance for the help.

then you made some mistake.
start with two different flas. one with a red rectangle on stage and the other with a blue rectangle on stage and nothing else. publish your html and js files.
combine the two into one and, if you have a problem, post the code from your one html file and your two js files.

Business Catalyst will not allow me to add more than 11 items to Web Map? Is there any fix for this?

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

INDESIGN GLITCH: Creating an XML file from Indesign Layout - Issue "Using more than one line of GREP" & "Map Styles to Tags"

I currently create XML from InDesign CC by Mapping Style to Tags.
- The Paragraph Styles are manually apply to text. These styles include multiple lines of GREP to automatically apply character styles.
- I map some of the paragraph and character styles to prebuilt tags that have the same name "Map Styles to Tags".
I have found through trouble-shooting that InDesign is unable to "Map Styles to Tags" for more than one line of GREP. I therefore have to chose which line of GREP to automatically tag and which lines to manually tag.
Please can anyone help, I need to automatically map tags to at least two character styles in one paragraph via GREP.
Thanks,

OK. The best I can suggest is running a Find/Change like this:
Which will actually apply the character style to the italics (and I would do the bold as well just to make certain). Then run the Map Styles to Tags again, using the Apply by Name. Which will tag the italics.
I don't know why ID can map to the bold and not the italic character style. It either should do them both (as in this instance) or none at all as the character styles are not actually applied by the grep, just the styling from the character styles.
Mike

Maps - how to set up more than one destination

In Mavericks 10.9.4, how do I use the system Maps application to set up more than one destination? I saw no way to add a 2nd destination to my route. I know I could set up several one-destination trips but that seems silly.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Mapping more than 1 Element to only 1 element

Hi
As per my work scenario, i need to map more than 1 element on the Inbound Message type to only 1 Element on Outbound Message type in Integration Respository of XI 2.0 using Graphical Tool Editor. since I am new to the Technology
Can any one can suggest me. What would be the better option i.e Graphical Tool Editor or XSLT or Java Mapping.
If possible provide any urls for.
Thanks & Regards
Shailaja

Hi Shailaja,
as in your case since the scenario seems to be very simple i would suggest you to use graphical mapping itself in this case.but when the scenario becomes very complex,we can go for either java mapping or xslt mapping.
for graphical mapping, go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/bf9640dc522f28e10000000a1550b0/frameset.htm
for xslt mapping go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm
for java mapping go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
concatenate two or more fields in the source and map it to one field in the destination.this can be done even based on conditions in graphical mapping.if you have a problem doing the same, please let me know.
and please go through this link which clearly explains the 3 types of mappings.
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
Regards,
abhy
PS: Do award points for useful answers.

Mapping a CMP bean to more than one table

Hello,
I like to map a CMP bean to more than one table. I am using wlserver7.0 SP2. I
have a VendorBean with a CMP field "comments" mapped to VENDOR_COMMENTS table.
All other CMP fields in VendorBean are mapped to VENDOR table. Below is the snippet
of weblogic-cmp-rdbms-jar.xml:
<weblogic-rdbms-bean>
<ejb-name>VendorBean</ejb-name>
<data-source-name>sweepDataSource</data-source-name>
<table-map>
<table-name>VENDOR</table-name>
<field-map>
<cmp-field>expIndicator</cmp-field>
<dbms-column>VENDOR_EXP_IND</dbms-column>
</field-map>
<field-map>
<cmp-field>vendorId</cmp-field>
<dbms-column>VENDOR_SEQ_KEY</dbms-column>
</field-map>
</table-map>
<table-map>
     <table-name>VENDOR_COMMENTS</table-name>
     <field-map>
<cmp-field>vendorId</cmp-field>
<dbms-column>VENDOR_SEQ_KEY</dbms-column>
</field-map>
     <field-map>
<cmp-field>comments</cmp-field>
<dbms-column>VENDOR_COMMENT</dbms-column>
</field-map>
</table-map>
As you can see, "vendorId" is the primary key cmp field mapped to VENDOR_SEQ_KEY
column in both tables. The relationship between the table rows are 1 to 1. When
I run ejbc, I get the exception below:
[ejbc] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Asserti
on violated ]
[ejbc] at weblogic.utils.Debug.assertion(Debug.java:74)
[ejbc] at weblogic.ejb20.cmp.rdbms.RDBMSBean.processRole(RDBMSBean.java
:1389)
[ejbc] at weblogic.ejb20.cmp.rdbms.RDBMSBean.processDescriptors(RDBMSBe
an.java:1105)
[ejbc] at weblogic.ejb20.cmp.rdbms.Deployer.readTypeSpecificData(Deploy
er.java:299)
[ejbc] at weblogic.ejb20.persistence.PersistenceType.setTypeSpecificFil
e(PersistenceType.java:490)
[ejbc] at weblogic.ejb20.persistence.PersistenceType.setupDeployer(Pers
istenceType.java:407)
[ejbc] at weblogic.ejb20.deployer.CMPInfoImpl.setup(CMPInfoImpl.java:11
4)
[ejbc] at weblogic.ejb20.ejbc.EJB20CMPCompiler.generatePersistenceSourc
es(EJB20CMPCompiler.java:64)
[ejbc] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:22
3)
[ejbc] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:3
44)
[ejbc] at weblogic.ejbc20.runBody(ejbc20.java:470)
[ejbc] at weblogic.utils.compiler.Tool.run(Tool.java:126)
[ejbc] at weblogic.ejbc20.main(ejbc20.java:711)
But if I put the "comments" <field-map> inside the VENDOR <table-map> and get
rid off the <table-map> for VENDOR_COMMENTS, I was able to run ejbc. Of course,
I get the run time exception during deployment because, there is no column called
"VENDOR_COMMENT" in VENDOR table. Please help me. Thanks a million.

Wrong newsgroup, needs to go to one of the ejb newsgroups.
mbg
"Sai S Prasad" <[email protected]> wrote in message
news:[email protected]...
>
Hello,
I like to map a CMP bean to more than one table. I am using wlserver7.0SP2. I
have a VendorBean with a CMP field "comments" mapped to VENDOR_COMMENTStable.
All other CMP fields in VendorBean are mapped to VENDOR table. Below isthe snippet
of weblogic-cmp-rdbms-jar.xml:
<weblogic-rdbms-bean>
<ejb-name>VendorBean</ejb-name>
<data-source-name>sweepDataSource</data-source-name>
<table-map>
<table-name>VENDOR</table-name>
<field-map>
<cmp-field>expIndicator</cmp-field>
<dbms-column>VENDOR_EXP_IND</dbms-column>
</field-map>
<field-map>
<cmp-field>vendorId</cmp-field>
<dbms-column>VENDOR_SEQ_KEY</dbms-column>
</field-map>
</table-map>
<table-map>
<table-name>VENDOR_COMMENTS</table-name>
<field-map>
<cmp-field>vendorId</cmp-field>
<dbms-column>VENDOR_SEQ_KEY</dbms-column>
</field-map>
<field-map>
<cmp-field>comments</cmp-field>
<dbms-column>VENDOR_COMMENT</dbms-column>
</field-map>
</table-map>
As you can see, "vendorId" is the primary key cmp field mapped toVENDOR_SEQ_KEY
column in both tables. The relationship between the table rows are 1 to 1.When
I run ejbc, I get the exception below:
[ejbc] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[Asserti
on violated ]
[ejbc] at weblogic.utils.Debug.assertion(Debug.java:74)
[ejbc] atweblogic.ejb20.cmp.rdbms.RDBMSBean.processRole(RDBMSBean.java
:1389)
[ejbc] atweblogic.ejb20.cmp.rdbms.RDBMSBean.processDescriptors(RDBMSBe
an.java:1105)
[ejbc] atweblogic.ejb20.cmp.rdbms.Deployer.readTypeSpecificData(Deploy
er.java:299)
[ejbc] atweblogic.ejb20.persistence.PersistenceType.setTypeSpecificFil
e(PersistenceType.java:490)
[ejbc] atweblogic.ejb20.persistence.PersistenceType.setupDeployer(Pers
istenceType.java:407)
[ejbc] atweblogic.ejb20.deployer.CMPInfoImpl.setup(CMPInfoImpl.java:11
4)
[ejbc] atweblogic.ejb20.ejbc.EJB20CMPCompiler.generatePersistenceSourc
es(EJB20CMPCompiler.java:64)
[ejbc] atweblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:22
3)
[ejbc] atweblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:3
44)
[ejbc] at weblogic.ejbc20.runBody(ejbc20.java:470)
[ejbc] at weblogic.utils.compiler.Tool.run(Tool.java:126)
[ejbc] at weblogic.ejbc20.main(ejbc20.java:711)
But if I put the "comments" <field-map> inside the VENDOR <table-map> andget
rid off the <table-map> for VENDOR_COMMENTS, I was able to run ejbc. Ofcourse,
I get the run time exception during deployment because, there is no columncalled
"VENDOR_COMMENT" in VENDOR table. Please help me. Thanks a million.

How to map more than one xml element with some Paragraph in a Text Frame

Hi friends,
I am new in InDesign Java Scripting and I have to place or map, more than one xml elements of different parents, into one textbox. Is it possible through JavaScript? Can anyone help me in this because I have no idea how it should work and it urgently required.
Thanks in Advance

I had answered to you already in your first post: the short answer is that it's not possible on the same text box unless you assign a common ancestor of these two "parents" item. That's not a question of scripting, it's the way Indesign handle the XML with the layout. Import a xml in Indesign and drop tags to page item. What you can do manually is quite representative of what can be done through scripting.
If you assign this anscestor to the text frame, you have to expect that all text child items will be displayed in the text frame (including the text of all the child of the two "parents" and all the other parents/childs that could be under the common ancestor). Having a XML that is designed for Indesign usage is pretty much inevitable if you are doing anything "serious".

PI Message Map - useOneAsMany issue with more than 10 lines.

I am having an issue using 'useOnAsMany' . I am using this to map lines of text from an idoc, specifically the SHPMNT04 idoc. When there are more than 10 lines of text (i.g. 10 occurances of E1TXTP8) the sytem drops everything after the 10th line. When I check the context of the fields it appears all occurances are being mapped however when I execute the map it drops the text after the 10 line. Is this a bug? Has anyone seen this and know of an answer?
I am using 'useOneAsMany' with E1TXTH8-TDID as the first argument and E1TXTP8-TDLINE as the second and third arguments. I am simply moving all the text when TDID = Z001.

Hi Busse,
Can you check the occurence of the target field to which you are mapping? If it is 0..10 then you will only 10 lines in outupt, else it should get populated.
Regards,
---Satish

E1EDP35 producing more than 1 segment mapping

Similar Messages

Maybe you are looking for