E1EDPA1 - conversion table and partner functions

Hi!
I need to populate 3 lines in segment
E1EDPA1:
PARVW - Qualifier depends on partner function, will be ZG or ZF.
PARTN - Partner number
LIFNR - Vendor number
My question is this: what are the tables related to this information so I could retieve needed partner function for qualifier?
Will reward,
Mindaugas

It shoule be :
if application is MM Side - EKPA and ADRC Tables
if application is SD Side - VBPA and ADRC Table
Thanks
Seshu

Similar Messages

What is the table for partner functions in Billing document

Hello Experts,
As per the business requirement my functional consultant included Fright agent (created as a vendor) in billing document partner functions,
so they want to display the name fright agent on the invoice,
i have checked all the tables related to Billing document, i was unable to find the fright agent
I checked in VBPA table (partner function table) (remaining partner functions are there in vbpa table but fright agent is not there, Is there any function module is available to pick these information ,Please help me in this.

Read some documentation like [Partner Functions|http://help.sap.com/saphelp_crm40/helpdata/en/3c/92eceb484a11d5980800a0c9306667/frameset.htm], also be aware of the conversion exit on the field PARVW. (check via SM30 on view V_TPAR_SD)
Regards,
Raymond

Sales District and Partner function relationship in customer master

Hello there
I am working on a report and need to know one table relation for sales District and Partner function
i have a requirement , where i want to list all the partner number/Partner function assign to the customer with ref to the sales District
we have one partner function Tab at sales Area tab in customer master , and another when we click on Sales district tab at header will get another window where we maintain partner function relate to the sales District , i want to have all those partner function in report , can you please help me where i can find that in table ? when i do F1 its says KNVP but that table maintain at the sales area leval , not for the Sales District !! if you can help
thanks
Sonam

Hi Sonam -
and another when we click on Sales district tab at header will get another window where we maintain partner function relate to the sales District
Do you have custom table/maintenance for sales district? Are you not maintaining Sales District in Sales Tab of customer master.
You have to look for the field and table where you have maintained sales distict along with Customer and join the customer with KNVP customers and get all the partners.
For Example - if you have mainationed sales district in KNVV table of BZIRK field then you have to join KNVV -KUNNR with KNVP-KUNNR and extract all records of customer distict and associated partner functions.
Let me know,if the given solution is not applicable for your case.
Thanks
Amit Gupta

Message determination and Partner function LS (Logical system) for PO

Hi,
I have worked in the past with vendors (VN) as partner roles in a PO, with the message to create an EDI outpout to Partner Type: LI (Vendor), and this works succesfully.
Now, the idea was to use in EDI, a Partner Type: LS (Logical system) as a receiver of EDI messages (message types: ORDERS) for inbound Purchase Orders to the Partner.
So, we have set up a respective message condition, with Partner Function: LS (Logical System), in transaction: MN04 (Create Output-condition records).
A. When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent to partner.
B. When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N?
There is a single message condition that is to be read for both cases (trans: ME59N and ME21N).
Note: If I try ME21N, and enter the output type and partner (=Logical System), manually, I receive a warning message :
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent.
However you can not assign a partner function LS to a vendor, in vendor master data, because of message CZ 327 (Can not use this partner role).
Anyone with similar experience? Thank you for your advice.

Hi,
I well understand that the receiving partner can be a partner: Vendor (LI).
I have seen that working.
However, in the Partner Profiles (trans: WE20), the receiver was created as a Logical System (LS).
We want the partner Logical system (LS) to receive the idoc for purchase order (ORDERS).
After that, I think that the idea is that the LS can generate an idoc for a sales order creation that will then outbound to another partner. I think that this is the concept.
The issue is that I have seen that the POs created with transaction: ME59N, have received from message determination (trans: MN04) the message with partner LS (automatically), and the idoc of the purchase order (ORDERS) have reached the partner LS.
The question is why the message determination fails when creating the PO from trans: ME21N or ME21, with reference to the PR. Message condition is the same and message determination procedure is the same for both cases.
There is no issue with customizing for the LS in trans: WE20
(Port processing agent is Active for LS and ORDERS have the proper processing code for application EF).
I hope I am helping more with this.

Table where Partner function related to any particular ticket is stored

Hi All,
Can Anybody tell me name of the table where Partner function related to any particular ticket is stored.
Thanks in Advance
Regards,
Amit

Hi Amit,
The table vision CRMV_LINKPARTNER will retrieve the information you're looking for (just enter the service ticket GUID as input).
If you take a look how this vision is elaborated, you'll check how you can associate the table CRMD_ORDERADM_H to table CRMD_PARTNER.
Kind regards.

No entries in Define conversion group and external function module setting.

Hi all,
After active bussiness function SAP Oil & Gas, my system have a problem in SPRO.
SPRO --> IMG --> Industry solution Oil & Gas (Downstream) --> HPM --> QCI configuration --> Define conversion group and external function module setting.
Problem appear: Has no entries in there!
Please, help me! Thank you so much!
Tks & best regards,
DatHT

Dat,
There are few entries normally delivered by SAP and which are good for a regular implementation. It is possible that those are not copied over from the reference client. Second option is to check the BC set (if) available for this activity and pull those in. Check the SAP reference client first, most likely that has entries which you can copy over to your regular client.
Regards,

Whats the relationship between oppurtunies and Partner function in table?

Hi,
I have to generate a dynamic Query for Search to filter based on Partner function.
I got crmd_partner_fct table which has the codes assigned to the Partners But how do i relate it to
crmd_orderadm_h so that I can filter based on the partner number i select?
George

i have so many partners under pft_5 (Employee) and all are giving value pft_5 in the CRMD_ORDER_INDEX table for the same GUID in header.. How can i find out the oppurtunities searching by partner function of PFt_5 group .. (Not sure what to ask since We have this new partner functiions added to the dropdown and i dont see any difference in the table based on the Partner Function selected in the screen.Each function has a different number assigned but I dont see that in the table)

Sales employee and partner function.

Hello ,
We have reporting requirement at our client as Sales by Sales employee . I can see the standard charactierstic " 0SALES_EMPL" in our Sales overview cube which is mapped to PVRTNR at R/3 side .
But at our client Sales employee is maintained through partner function and we have lot of differnet parther function to update the Sales Rep on SO and Billing document . So basically Partner function is ER , the Personal number is getting updated.
So with Standard field of PVRTNR - Sales empl doesn't get used in my scenario .
Could you please let me know , now how can I update this Sales Rep on my Sales Order header or On Billing document ?
Let me know if my question is not clear .
Regards

Thanks ..That's a nice approach ..but one more ..
If there are more than one Sales Rep assigned to Sales Order , then how to manage .
As i said , we have mutiple partner function ...Let me put a table , as it is functional information which I am not getting correctly .
Hope this will help you to understand .
May assign to Ship to     Description
BP     Bill-to
PY     Payer
DP     Depot
ER     Telesales Specialist
Y0     Area Specialists
Y1     Primary Account Manager
Y2     Bulk Specialist
Y3     Safety Specialist
Y4     Spec Gas Specialist
Y5     Medical Specialist
Y6     Construction Specialist
Y7     Specialty Products Specialist
Y8     Automation Specialist
May assign to Y0     Description
Z2     Bulk Specialist
Z3     Safety Specialist
Z4     Spec Gas Specialist
Z5     Medical Specialist
Z6     Construction Specialist
Z7     Specialty Products Specialist
Z8     Automation Specialist
Note 1: "Y0 - Area Specialists" will be assigned to ship-to but will be set up using te ZINT account group as the Cash Account for that branch
When the partner function is Y* , Sales Rep will be assigned to Kunn2 in KNVP table .
Please help me , how can we manage .
Regards

CRM 4.0 and Partner Functions?

As I understand it, they believe that there is a limitation on the number of partner functions that can be replicated
between CRM 4.0 and ERP?
And the limitation is a total of 999?
But what if more than 999 are needed?
I guess that these are created as follows:
Transaction SPRO
u2013 CRM
u2013 Basic Functions
u2013 Partner Processing
u2013 Data Transfer
u2013 Distribution of Partner Functions from CRM into R/3
and the table involved is CRMC_PARTNER_2R3
Is there a workaround?
Is there a greater number of partner functions allowed in newer CRM releases?

The limitation is the standard system design in ERP, not CRM.
There is a limit of 999 entries due to a field length of 3 characters. Please see table KNVP - the field PARZA is the Partner Counter, and you can see in the table that it is defined as only 3 characters, hence the 999 limitation.
Here are 2 options to consider to demonstrate that there are possible options:
- A ship-to partner does not need to be assigned to a sold-to in order to be used on a sales order. As long as the ship-to has been
set up (using transaction XD01 and account group 0002) you can use any ship-to in an order.Break up the sold-to by regions or some other means so that you can accommodate all of the ship-to's.
- You could possibly make a work round by changing the domain PARZA to 4 digits , but this would be a work round and would require a full investigation on the feasibility of this change. Unfortunately this would have to be on a Consultancy basis, see SAP Note 83020. Also SAP Note 170183 would apply.

Customer number and partner functions

Hi
Is there any way to get the details if we give customer number as input and ship to party , bill to party and payer will get as out put whose are diffrent to the customer no.
is it possible through SE16 or any standard report for this requirement( there is one table KNVP but it gets all the sp,sh,bp,py details but how to get teh report if they different to customer no)
please suggest any body
regards

Venkat,
Correct me if my understanding is wrong?
You want to list the different partner function for the customer only when these are different than the input customer?
for example : If one customer SP= A, SH = B, PY= C, BP = D. Then this customer should come into list right?
if this is the case, you can easily achieve this by SE16N.
Go to SE16N,
enter KNVP table, Press enter
You can see 2 customer field : KUNNR and KUNN2,
in KUNNR customer enter your INPUT customer.
In KUNN2 : First click on Options ( second column , O), Select Not Equal to : and enter the same value of the customer and execute...
But this will only work for One by One customer....
The other option is Go with Z developemnet.
Thanks,
Raja

Table containing Partner Functions Data for a specific Vendor

Hi SDN members
I'm building an iView on our Supplier Portal, and part of our "Welcome iView", we want to show supplier (vendor) relevant information contained in the Vendor Master. One of them is to show their Quality Partners in Read mode, including their phone # and email address. However, I cannot find the tables linking a Vendor to all the "partners" listed in the Display Vendor : Partner Functions Screen. Do you happen to know where this data is? Also, all the details for a given partner is contained somewhere else, which table(s) would that be?
Thanks in advance for your collaboration!
Eric L.

Hi,
Vendor partner functions are stored in table WYT3.
Cheers !

PO and partner functions of a contract

Hello,
We have the following problem:
In our system, we maintain partner functions in the partner functions of the vendor.
And for this vendor we have a contract. However, we don't maintain partner functions in the contract.
But when we create a PO for the vendor and the contract, the system looks for partner function in the contract and doesn't look any more for the partner functions in the vendor. but, as we have no partner functions in the contract....partner functions in PO are empty.
I can't find customizing point to indicate that we don't want to look partners functions in contract. Is it possible?
Thanks,

the data is always taken from the most specific source, which is the contract in your case. it is not possible to use contracts and omit at the same time the partners (or not available partners) from the contract.

Account Group and partner functions in customer master records

Hi Gurus,
I need your help to confirm the following understand if correct:
1. To create customer master record for partner function Ship-To, need to create a customer master record using the uniquely assigned account group for Ship-To , that is, 0002 . In this ship-to master record, define in its partner function tab, the other partner functions related to it.
2. To create the above, it cannot be achieved by just assigning the partner functions in the partner function tab of SOLD-To customer master record , created using account group 0001.
Question:
1. How does the system know or allow what codes a user can select (f4) or enter manually when defining in customer master record's partner function tab, the partner functions and their respective codes?
How is this controlled? Is it by user authorization? or will user / sales administrator be able to select any codes tied to a partner function?
2. Lets say there are 2 partner functions : Sales employee VE and 9E called Sales Representative. Both of these partner functions are of Partner Type PE.
When defining in customer master record's partner function tab, how does the system know what codes is selectable for the administrator for each of these partner functions?
best regards
M Russo

hi russo,
this is to inform you that,
1. yes you are right.
2. you need to follow the steps as you said.
Question:
1. that you can find in the search basing on account group for partners. that assignment we should know russo which SH to be assigned to which SP. no need to have authorization for that, make a note of the list of SH and SP to be assigned that's all.
yes, he will able to select any SH from the list but make sure that we assign the correct SH to the list of SP.
2. that you will be defining it in Partner Determination Procedures. at the time of CMR creation you have to select the correct code that will get populated in sales order.
hope this clears your issue.
balajia

Parties involved work center and partner functions in SAP WEBUI

Dear Experts,
Here is the situation
I have sales rep, quote admin1, quote admin2 and quote admin3 positions in my org model. Each level has approval process. All of these three types of users will create quotes directly without a previous document/follow-up document.
When a sales rep or anybody other than quote admin logon to create quote, parties involved <> quote admin should be admin1. When admin 1 logon, it should default to admin1. Admin 2 logs in only after admin1 so, it should display admin1 and admin2. When admin 3 logson, it should show admin1, 2 and three. They need to be able to see howmany quote admins already there in the quote. How can I get this?? Please help me..

Hi Sri,
You can use Partner Determination Procedure for the first time to create a Quotation automatically which will be triggered by the system. For the next time, based on your requirement you can probably need to use something else which will trigger the partner determination and will select the partner function and the business partner. You can check the badi - COM_PARTNER_BADI which is used for the Partner Procedure Determination.
Hope this helps.
Thanks,
Samantak.

Conversion tables and table entries

I'm working on a conversion table to move our legacy products from unstructured FM to DITA. I understand the basic concepts but I'm having a problem with the table cells.
In my conversion table I have P:CellBody in the first row, mapped to entry with a qualifier of cellbody.
I also have TC mapped to entry.
The same holds true for P:CellHeading and TH.
Consequently, my text is wrapped in two entry elements. The Show Element Context tab shows:
entry
entry
row
tbody
tgroup
table
body
NoName
NoName
I'm pretty sure it should be the same as above with only one entry element (and of course with the NoNames fixed which I think I know how to do; I just haven't gotten there yet).
How do I avoid having my cells wrapped in two entry elements?
Thanks in advance,
Marsha

Marsha,
    I don't quite understand either what you are trying to do or what exactly is in your conversion table. Be aware, however, that FrameMaker will always create elements for the basic components that occur in your tables. The conversion table gives you limited control of how those elements will be tagged, but not whether the elements will exist.
   If your conversion table contains rows such as:
P:CellBody
entry
cellbody
TC:
entry
You will indeed get nested entry elements. The outer one is the table cell itself and the inner one is the paragraph. FrameMaker does not permit a valid document to use the same element tag for both a cell and a container, so aside from the results not being what you wanted, they are not correct within FrameMaker.
If your table cells contain single paragraphs and you don't want elements for both the cells and the paragraphs, your conversion table doesn't even need to mention the CellBody and CellHeading paragraph tags. In fact, if your table formats use CellBody as the paragraph format for cells in the body of a table and CellHeading as the paragraph format for cells in the table heading, your EDD doesn't even have to apply the paragraph formats.
Another variation is to include a paragraph tag in a conversion table row for a table cell by combining TC: and P: to match table cells containing particular paragraphs. For example:
TC:P:CellBody
entry
creates cell elements named entry from table cells containing paragraphs tagged CellBody. The paragraph within such a cell is not wrapped in an additional element.
One final comment is that TH: in a conversion table refers to the entire table heading; its children are heading rows. The table body analog of TH: is TB:, not TC:.
       --Lynne

E1EDPA1 - conversion table and partner functions

Similar Messages

Maybe you are looking for