E2000 does not recognise WD Mybook World II

I have  a homenetwork with:
- Linksys E2000 router
- WD Mybook World II NAS
- 2 Windows 7 laptop2
- 1 windows 7 Desktop computer
Router works ok with wireless clients (laptops and desktop) but does not let the clients recognise the WD Mybook.
Is there any setting that I should change??

All the devices are able to access the Internet through the router that means the router is working fine.
The WD My Book World Edition hard drive and the WD NetCenter do not have a default IP Address, as these devices are setup to accept a DHCP IP Address (Domain Host Controller Protocol) by a router or DHCP server.
Open the setup page of the router. Click on Status and go to Local Network sub tab. Click on DHCP client table and check the IP address of the WD Mybook World.
To access and store data on a My Book Live, WD TV Live Hub Media Center, WD ShareSpace, My Book World Edition (White Light), or My Book World Edition II (White Light) after setting up the device, you must first map a network drive to one or more of the default shares. Follow this link to map a network drive.

Similar Messages

  • I changed from english to spanish and then back to english and now it does not recognise english when i type emails. how do i get it back to english?

    i changed the lan uage of my iphone 3gs from english to spanish and then back to english. now it does not recognise enghlish but seems to be using a mix of languages. how do i get it back to english please?

    Please check in Settings: General: Keyboard: International Keyboards how many there are and which.
    If there is more than one you can either delete the ones that you don't use, or if you want to type on different ones at different times you can change between them using the key with a world that appears when you are using the keyboard.

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

  • HT1414 I was in the middle of updating my iphone 4s to iOS7, then it crashed, I am able to get the apple simple when trying to restart, then it shows the cord and itunes logo and then switches off again.  Itunes on computer does not recognise the phone

    I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
    Tried the tips
    Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
    when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
    please can anyone else help me???

    Unable to Update or Restore..?
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Take your time... Pay particular attention to Steps 3 and 4
    Note:
    Some users have reported as many as 8 or 9 attempts were necessary before success.

  • My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

    Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

    Hi Mick2291,
    Thanks for visiting Apple Support Communities.
    I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/HT3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Best Regards,
    Jeremy

  • Please help. ive bought a second hand ipod nano, when i connect it to my  pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

    please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

    there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
    so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

  • Itunes does not recognise ipod touch

    i've reinstalled the latest version of itunes plus ios 6 and followed the troubleshooting sections for Windows 7 PC but itunes does not recognise the ipod touch.  the USB cable is ok (charges the ipod anyway) but when I run diagnostics it does not see an ipod.

    iOS: Device not recognized in iTunes for Windows
    Try another computer to help determine if you have an iPod or computer problem.

  • Windows does not recognise my phone

    I get this message when I connect my phone to all computerr,
    the last USB device connected has malfuntioned and windows does not recognise it??

    Hello,
    Check out these steps from Apple: http://support.apple.com/kb/TS1538
    This should help!
    Regards,
    Jake

  • Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

    i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
    or pen drive.  I have a HP pavilion dv4 series notebook.  the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
    in device status is says:  Windows has stopped this device because it has reported problems. (Code 43)
    location: Port_#0002.Hub_#0005
    driver provider:  microsoft
    date of driver: 21-06-2006
    driver version: 6.1.7600.16385
    HELP!!!!!!!!!!!

    Hi ameet2005,
    Please check if the following suggestions help:
    First, please disconnect all USB devices and then perform the following steps:
    1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
    if necessary.
    2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
    3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
    Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
    If the issue persists, please check if it can be resolved by running
    System File Checker.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    Does the iP{od work OK
    Does it charge when connected?

  • IPhoto does not recognise iPhone since upgrade to iOS 5.1

    iPhoto does not recognise iPhone since upgrade to iOS 5.1. Have tried every suggestion I could find but to no avail. Using iPhoto 9.3 and IOS 5.1. This has only started happening since upgrade to IOS 5.1
    Image capture does not recognise iPhone device either, yet iTunes synchronises ok

    Any helpful suggestions to resolved this issue welcome!

  • Windows 8 does not recognise Excite 10

    Windows 8 does not recognise Excite 10. Before win7 done this without any  problems, now win8 looking for drivers! can anybody advice me what to do

    Hi,
    Please download the following program and run it on your Windows 8 machine:
       http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
    You need the printer on your home network.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 8 does not recognise photosmart 5510

    Cannot use my HP Photosmart since installing Windows 8. Printer does not recognise my pc.
    This question was solved.
    View Solution.

    Hi,
    Please download the following program and run it on your Windows 8 machine:
       http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
    You need the printer on your home network.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for