E2000 NAT issues with my xbox. ive tried everything please help!

ive tried the dmz port range triggering, forwarding. ive done it all please help me all i want to do is a play  little online.

what is the modem that you are using? some internet provider use a modem/router instead of a 'modem only' device.
if it is a modem/router they  have NAT enabled, and this would cause Double NAT on the modem and on the linksys router, which would cause the port forwarding setup not to work.
if that is the case you need to ask your provider to set your modem/router to bridge mode or work as modem only. when that is done, then you can proceed to port forwarding by following the instructions here

Similar Messages

  • We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

    We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

    Hi nancybrendel,
    Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
    Hopefully this helps!

  • My wifi wont work anymore with the ios 7 update I have tried everything please help!!!

    I updated to the ios7 it worked great for about a day and now my wifi will not turn back on! I have tried everything please help I do work from my phone and I need it to function properly ! I cant update for the newest ios7 because I dont have wifi!

    As Apple has posted on their website since early June, only the 5th gen ipod touch can handle ios 7.
    Do you have a 5th gen ipod touch?

  • I locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help

    i locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help

    If you have tried everything, then by definition, there is nothing else to try.
    Perhaps if you explained what you tried someone can help.
    If you have actually tried everything, then there is nothing anyone can do to help.
    Did you try reset?
    iPod touch User Guide (For iOS 4.3 Software)

  • NAT issues with 5 XBOX consoles on network

    I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.
    I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?

    If your xbox is directly connected to the modem, do you have an open nat for your xbox? Have you tried forwarding the ports? If it did not work using port trigerring, try forwarding the ports then. One thing that you have to make sure if you do port forwarding is that you should be getting a public IP address on your router page. If you're not getting a public IP, there might be a need for your modem to be set to bridge mode. You may refer to this link for more info: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22385 (Resolving NAT type issues with gaming consoles through a Linksys router).
    Btw, are you using the cloud firmware or classic?

  • " Compatibility issues with power management. on g50 45 . please help.

    LENOVO G50-45my BIOS is up to date and I updated my power management system just yesterday. The battery also drains very quickly , just 90 minutes. Please help.I am getting this problem since a week now. and my battery drains so quickly even when on power saver mode. when i click on the message , I get no solution although my laptop is connected to internet it says , its not connected.And when i click on it , it says ,  Now if I click " View all problem this applies to , it says a different thing, there are two things saying the sam thing, driver software installation. wheni click one of them it says, " Pnp driver not found" PLEASE HELP. Thank you. I want my power manageent system back. 

    You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
    When this happens, Force Quit doesn't do anything. Any other options?
    You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

  • IMac - LAGS, especially in Safari! Tried everything please help!

    Hey everyone!
    I have a desktop iMac and in the last few months it has slowed WAY down and its doing my head in!
    I bought it 2 and a half years ago and never had these problems with it. It has 4gb of RAM, 500 gb hard drive and i updated to Lion, which is possibly when it started going wrong!
    ISSUES:
    -Safari majorly lags, especially with YouTube and other online videos, usually gets to about 30 second in then the video stops and lags so badly it freezes the entire machine, i have to force quit Safari!
    -simple things such as searching for a file with spotlight has become such a drag. i type in for example 'work invoice' and it takes roughly about 20 seconds so show anything, it used to show it in about 0.000001 seconds lol!
    -pretty much everything is much slower now but the main issue is definitely Safari!
    WHAT IVE TRIED:
    -ive taken it to my local apple repair shop and they found NOTHING wrong, nothing at all, they had the thing for 3 days and found nothing! they ran so many tests and nothing was wrong with the machines hardware, which is annoying i was hoping it would find something!
    -ive repaired all the permissions, reset safari several times, transferred about 200gb worth of stuff to external and still no luck
    -removed several start up programs and background programs, still nothing, emptied the cache folder like advised by apple over the phone, NOTHING
    Im literally stumped i cannot think of anything else that i can do so im hoping all you Apple experts out there have a simple fix for me because its driving me nuts lol!
    PLEASE HELP ME, i love my Mac and i want it back to the way it should be!!!!!!!
    Thanks a lot

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • IPad battery draining quickly - tried everything, please help!?

    Ive noticed recently that my iPad battery is rapidly draining.  I've even noticed a 20% decrease just overnight while locked, which has NEVER happened.  I've googled and research and tried everything possible.  So does anyone have some options I might be missing?
    Using 7.1.2, iPad 2.

    Try this first -  Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Poor battery life after installing iOS 7.1? Try these simple tips
    http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have tried everything Please Help

    Ok. Bentley. I have been surfing similiar threads on this
    forum regarding issues with the flash player.
    Here is my experience with trying to add flash player to my
    browser.
    When I was browsing the web, websites that allowed video such
    as ABC.com would give me this message.
    "In order to view this video you must have Macromedia Flash
    Player." This text was a link to the adobe download area for the
    Flash Player. So I would follow the link to the Adobe site. Then
    when I would accept the user terms and click on the Install Now
    button on the page. The page would just refresh and not install
    anything.
    So I searched the web for a different site to download the
    player. I was able to find one and downloaded the player and
    installed it. I restarted my PC and went back to ABC.com and it
    gave me the same message i mentioned before. So I came on these
    forums and I followed every possible solution mentioned and still
    no luck.
    I have downloaded the uninstaller. Uninstalled and
    reinstalled. Nothing
    I checked my registry and my registry matches exactly what
    the screen shot shows for Windows XP Pro
    Active X controls are fine.
    When I went to the test page at adobe.com it read that I have
    Version 9,0,45,0 Installed Successfully but, still can not get any
    video.
    Please help! Thanks.

    vmontes16 ,
    First of all, ABC.com isn't the best test site. They've
    switched from standard Flash Player to a customized player created
    by Move Networks (which, conincidentally is a division of
    Disney...)
    This is a Flash Player detection issue usually caused by
    missing or locked registry keys..
    Go follow the steps Darren wrote about in this thread:
    <
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1260151&enterthread=y>
    Those usually resolve it.. In the next few weeks we expect to
    have better tools available for diagnosing and resolving these
    issues. In the meantime thanks for sticking with us.

  • B210 printer no longer scans or copies I have tried everything please help!

    I do not copy or scan very often but today I tried to scan important documents and I no longer have the scanning or copying capability.  I can print perfectly from the computer.  I have tried everything (I believe) including reinstalling the software.  Can anyone please help.  I have important documents that needed to go out tonight.  Time is money.  Thanks in advance.

    Hi msiayoyo,
    Welcome to the HP Support Forums! I understand you are not able to scan or copy with your HP Photosmart B210a, you can print with no problems. Are you getting any error messages on the front panel when you attempt the copy or scan?
    I know you have completed some troubleshooting already but I would like you to continue here: A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F...
    A few tips:
    1. Try another wall outlet then the one you normally use, for testing purposes.
    2. Make sure you have no power bars or surge protectors as they can cause the printer to lose basic functionality over time, plug the printer directly into the outlet.
    3. Try to make a copy from the front panel, what happens?
    If you are still not able to make a copy after ALL the troubleshooting has been done, it is more than likely the printer hardware. I would then suggest calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl 
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Itunes 7.1 crashes computer, tried everything please  help

    im running OSX 10.3.9 and when i upgraded to itunes 7.1 it crashes when i try to run it. ive tried delting it and trying to install it again (including the new 7.1.1 which still didnt work). when it is being installed, it says 0kb is being installed, if that helps. i tried upgrading my quicktime, this didnt help either. i tried to download an older itunes, and it would hav the same problems as the new one. thanks guys

    Hello
    I just bought an Ipod as what tryingto get itunes to load for 5 hours last Friday night and another 4 hours on Saturday til my head exploaded
    I then installed an older version of itunes and it worked but the new version didn't
    In the end I re-installed XP home as a "repair" not clean install so that I wouldn't loose any work on my PC and within 40 minutes or so whatever was missing from my PC was installed and itunes 6 went on with no problem
    My advise is don't go round the houses like I did, just "repair" your XP installation and it's done
    Well, it did for me at least
    Hope this helps

  • ITunes will not install - have tried EVERYTHING - please help

    I recently (yesterday) bought an iPod and yesterday installed the iPod and iTunes software on my computer, with absolutely no problems. Then today, when I tried to get onto the Music Store, I could not access it. (error -3212 was the number, I think...it's been a very long night). After searching a number of forums, I attempted to download the newer versions of iTunes and Quicktime; at the end of this attempted installation, I got the Microsoft message that iTunes "has encountered a serious problem and needs to close."
    Now, several hours later, I have uninstalled and reinstalled the software (with my antivirus software disabled), gone through two system restores (have gone back two days), done the Windows Installer cleanup thing, everything that I have read to do. I went into msconfig and the Quicktime doesn't even show up there. No luck, no luck at all...
    My iPod is of absolutely no use to me without the iTunes. I have installed iTunes on a number of computers and have never encountered this problem. Please help!!
    Sincerely,
    LLM
    Gateway   Windows XP   Laptop

    Hello
    I just bought an Ipod as what tryingto get itunes to load for 5 hours last Friday night and another 4 hours on Saturday til my head exploaded
    I then installed an older version of itunes and it worked but the new version didn't
    In the end I re-installed XP home as a "repair" not clean install so that I wouldn't loose any work on my PC and within 40 minutes or so whatever was missing from my PC was installed and itunes 6 went on with no problem
    My advise is don't go round the houses like I did, just "repair" your XP installation and it's done
    Well, it did for me at least
    Hope this helps

  • I use the apostropy key and up pops. Quick find (links only) I have tried everything, please help!!!

    I have tried everything, nothing seems to work, I just updated to the most recent version hopping that the developers had attended to this issue. I have tried the about:config and made a true\false to shut off all quick search functionality but it doesn't work. Nothing seems to get the (') key to stop bringing up the search box....
    It does it sporadically, how can I shut off ALL hot key\combination key quick launches?

    See searchhotkeys: http://nic-nac-project.de/~kaosmos/index-en.html#searchkeys

  • Working ipad BUT black screen, have tried everything, please help

    Please help. I have an ipad with a black screen. The screen works because when I reset by holding the buttons down for 10 seconds, it restarts and I can see the Apple logo. When I touch the screen, voice is on, if I try turning off the voice with 3 finger tap, the voice turns off but the screen is still blank. I have tried updatinf the ipad's software via ITunes, but that has not made a difference. I have also tried to restore from backup, but it wants my password and there is no way to input it with a blank screen!  I cannot think of anything else that I can do. I ipad clearly is working but without the screen showing I cannot seem to do anything?
    Advice appreciated.

    I have solved this now by going into an Apple store.
    They basically had to do a hard reset as they admitted their was some sort of software problem. They connected the ipad via Itunes, held the home and power button together for 8 seconds, then released the power button whilst still holding onto the the home button.
    This then opens up various menu prompts on your PC/Mac to have a complete reload.
    I am afraid to restore the ipad back from a previous version in case the problem happens again. At least it is working now though!

  • Screen wake up problem/ tried everything-please help!

    I have had the my G2 since September and have absolutely loved it. A couple of weeks ago, it seemed to get a little "twitchy" with some erratic touch screen behavior (delayed responsiveness, over responsiveness, etc). Then, one day, the "knock on" (double tap to wake up phone) feature quit. Then numerous apps began not working correctly. I uninstalled the 2 apps that have been installed in the last couple months as well as a few others and the problem didn't change. Then, went to put the apps back on and the "install" button in play store is unresponsive. The rest of the screen works fine, just not that little button. Also, the screen that drops down to tell you the notifications on the top bar is super finicky all of a sudden. Checked all settings, tweaked settings, rebooted, Did a hard reboot, safe mode, and factory reset. No resolve. I am not a "heavy" user, only about 10 apps total installed on my phone in the 7 months I've had it. Frustration is  mounting and I really don't want to have to take it in. I've already lost all of the settings and everything I had to personalize my phone…Taking it in is last resort. Please Help!

        Let's get your LG G2 back to like new condition jess28540! I had similar issues with mine and I resolved by doing a hard reset (I understand that you have done this) and removing an application that was causing my phone to act erratic. What I recommend is doing a hard reset http://vz.to/1bEaoQu (factory reset), then install your third party application one at a time and test for a few hours before installing another application. This process will assist you identifying conflicting applications, then remove them for good and you should be OK. Keep us posted.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

Maybe you are looking for

  • SMF environment variables not working

    I have a Glassfish application in SMF with the following manifest file. I am trying to set the JAVA_HOME to /usr/jdk/latest. svccfg -s svc:/application/SUNWappserver/domain1 setenv -m stop JAVA_HOME /usr/jdk/latest svccfg -s svc:/application/SUNWapps

  • How to approach this scenario (Many to Many). A bit confused

    Hi all, I have a scenario where I am confused and am looking for some guidance. Let me explain the scenario I have. I have an Item Table (Which will be used to create Item Dimension) : ItemID ItemName Item1 ItemName1 Item2 ItemName2 Item3 ItemName3 I

  • Merging MP4 clips and saving as MP4 in PE8

    In PE8, I imported several MP4 clip segments that are part of an entire MP4 movie.  I placed them in sceneline view.  The only option I could save it was a PE file and I would have to watch it using PE.  The clip scenes played back slow and seemed di

  • Safari 4 won't istall on leopard

    I installed leopard and then I went to get the latest Safari for leopard. I downloaded the package, clicked on "install" and it says "safari can't be installed on this drive because this version of safari must be installed on version 10.5.8 or later.

  • Selecting the sound output device

    Hi, is there any way to select which sound output device to use from an Adobe AIR application? If there is, I can't seem to find it (using either the manual, the forums or Google). Any help will be greatly appreciated. Thanks, Michiel