E2000 works wired to router, but wireless doesn't work? Mobile devices not finding the wi-fi...!!!

Hi, I have had the E2000 now for about 3 months and everything has been fine up until Christmas Day. All of a sudden the wireless portion isnt functioning. My smartphone shows intermittent broadcast of the wi-fi, it will be there for a second and the next its gone. My desktop works just fine connected directly to it.
So far, I have done the reset on the back, uninstalled the software and reinstalled, reconfigured everything and it still is the same story.
I know it just isnt my phone because I have another smartphone and an e-book reader that also is not finding the wi-fi portion. I just cannot seem to figure out why it is not working and its making me crazy....
ANY IDEAS?? Thanks.

it is possible that you may be experiencing wireless interference in your location.
try and change the channel in your router, follow the procedure here

Similar Messages

I have iPhone 4 with newest update and Mac laptop with Snow Leopard and current version of iTunes. When I hook the phone up via USB, iPhoto pops open and reads the pictures for import, but iTunes doesn't do anything. Not seeing the device as a USB, either

Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
Regards,
Lindsey

cynecasey wrote:
... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
You have written a very long story, and I admit I have skipped most of it. But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
The fact that you chose not to update your hardware does not mean you could not update your software!
OS X 10.5 is very old (about four years). iTunes 11.1.5 (current version) requires at least OS X 10.6.8 to run. Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
You would start here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

Firefox opens websites when hard wired to router, but when using wireless I get a server not found message.

Firefox (3.6.10) opens websites when hard wired to router, but when using wireless I get message: SERVER NOT FOUND FIREFOX CAN'T FIND THE SERVER AT SEARCH.AVG.COM. My homepage is http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official. My anti-virus is AVG free 8.5.448. What can cause this?
If Work Offline is checked in Firefox File, I can get to Google search site. When I un-check it I still get the Server Not Found message

Did you check the connection settings?
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Belkin wireless router connected but browser could not find the host server

my new roommate has a belkin n wireless router connected to a cable modem which functions perfectly on her pc laptop. i am trying to connect my MacBook Pro to the router using her WEP password. this all works fine and my System Preferences/Network/Status shows that AirPort is connected with full strength, but i cannot load any web pages (i have not yet been able to load any pages at all using this router). the page load error reads "Firefox can't find the server at www.cnn.com" and "The browser could not find the host server for the provided address".
I spoke with Belkin support and they say the router is functioning properly, that is a problem with my mac.
When I go to Network Diagnostics, the status shows all green and says "This computer's Internet connection appears to be operating normally. Are you sure you want to use Network Diagnostics?
Could this be a firewall issue? A couple people have suggested that, but I'm not sure how to fix that.
I have tried rebooting the router and cable modem, rebooting the mac, etc.
any ideas on what settings i may need to investigate??
thank you!
Message was edited by: photoeyeseattle

photoeyeseattle wrote:
how do I know if the router has useful DNS servers? i am looking at the settings of the router on the pc that is online.
Somewhere in the settings of the router should be the DNS servers that it is using. Since the router is offering via DHCP to do DNS translation for your Mac, it must have useful DNS servers listed.
There are "public" DNS servers. I have no experience with it, but this Web page describes one from Google:
http://code.google.com/speed/public-dns/
Supposedly Google has a DNS server at IP addresses 8.8.8.8 and 8.8.4.4 that you might try. Since the DNS server setting on your Mac is grayed out, as a test you might try noting the setting in the "TCP/IP" tab of your AirPort connection item of the Network panel of System Preferences. Then switch from "Using DHCP" to "Manually", fill in the values you just noted, switch to the DNS tab and fill in Google's DNS addresses, and see if things work better.
do you have any other suggestions of where to seek help???
Perhaps a Belkin discussion group?

I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?

I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?

Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

After trying to install last update my itunes now doesn't work- have tried reinstalling and it gets struck saying mobile device not responding. Itunes says unable to successfully install itunes.

After a message on my computer to install an update a few days ago- I now can't open Itunes and have a message saying a module isn't working and I need to re install Itunes. However when I try to reinstall Itunes I keep getting an error message saying mobile device not working and then a message saying unable to install itunes. Any clues- Is apple stuffing up agian or is my computer mis behaving?

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

/remotelogout doesn't work on devices not connecte...

I lost one of my phones and it had skype on it so I wanted to sign out of that device so that if anyone found it and tried to open my skype he will be asked to enter the password again and won't see my message history .. I tried /remotelogout but it made no difference as I have another android device with skype on it and when I opened skype after typing /remotelogout from pc it just worked normally and even changing my password didn't automatically sign out of all other devices .... skype is the only app that doesn't show haw many devices are signed in with the account how to end skype activity or revoke acess of skype on some device remotely ?
/remote logout works on devices connected to the internet only while doing the /remotelogout while devices that aren't connected to the internet while doing the /remotelogout will remain logged in after being connected to the internet

I can see that occurring due to cached credentials or because the remote client is not pingable. You may want to try larger amounts of time to see if that still holds true. Have you tried changing your password when your phone is in offline mode? After doing this are you saying you can still actively chat on that client? I know if the client is working on cached credentials then you might be able to read what's local, but you shouldn't be pulling anything new, nor should you be able to reconnect after a normal power cycle.

I have an ipad first generation. I am trying to connect to a linksys router and it is not finding the wireless network. what do i need to do?

I have an ipad first generation. I am trying to connect to a linksys router and the ipad is not finding the wireless network. What do I need to do? Thanks for your help.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I want to restore my phone by connecting my Iphone4 to iTunes in Mac but it doesn't show phone device. What should i do now??????

I have problem when I updated iOS7 yesterday. At first, there was a message popped out in my Iphone 4 said "iOS7 available for u to update, then i clicked "update", then it said "wait while it verifying", after that my phone tuned blank and what i saw was only the "logo of apple". Until now i see only that Apple logo, i can't either switch my phone on or off.
My iTunes in Mac is just updated to version 11.1
I want to restore my phone by connecting my Iphone4 to iTunes in Mac but it doesn't show phone device.
I don't know why it doesnt connect to pc(Mac pro).
Any solution?

You need to restart the phone in DFU mode and update the software.
To restart the phone in DFU mode press the power and home button simultaneously for like 10 seconds once the phone is switched off release the power button keep holding the home button while you connect to the computer which has Itunes running and then you can restore or update the software, you can download the update and connect after the software has been downloaded if your phone disconnects, And enjoy you new IOS7.

I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

Hello SalsburgD
The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

See Troubleshooting issues with iTunes for Windows updates.
tt2

TS3694 mi ipod touch will not boot, it goes to the apple logo then shuts off, I tried to restore it but it shuts off while restore is going on then it saids it can not find the device

Hello,
I need help before i go to the apple store for help.
My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
What do i need to do.
Thank you for your help.
regards,
Mario
PS. The OS I am not sure do not remember exactly.

- Reboot the computer
- Try another USB port
- Try another cable try another cable
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

E2000 works wired to router, but wireless doesn't work? Mobile devices not finding the wi-fi...!!!

Similar Messages

Maybe you are looking for