E2500 router random reboots

I have a E2500 router that until recently has been working fine, the router currently will reboot at random occasions. I have tried resetting the router to factory defaults to test if the firmware was an issue but both the factory default and the most recent firmware build(1.0.05 build 2) offered on the download support page. I have tried 2 different AC adapters to test power and two different Cat5 cables so hard ware wise everything is looking good. I am concerned that it may be an issue still with firmware or with the cooling fan and the unit may be overheating.

I believed you already exhausted all troubleshooting steps to resolve this issue. Firmware upgrade should fix this but it did not. I’m thinking this device is for replacement.

Similar Messages

WRT120N Router randomly reboots

I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices. Has anyone else had similar problems or any suggestions to fix the problem.

First of all connect the computer straight to the modem just to check if the modem is working fine...
If the modem is working fine then try to upgrade/reflash the firmware on the router...
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Router randomly reboots itself almost every night

I've been with Sky for a few months now and this is becoming an increasing frustrating problem. Everything is fine until, somewhere between, I think 10pm-2am, the internet would slow down and after a 2-3 mins - grind to a halt, the connection drops (smiley face disappears from router) before it re-establishes a connection. This doesn't feel like an interference problem as the connection does not just drop - it gradually slows down before reseting itself. At first I thought this was just a firmware check/update but surely this cannot be happening almost every single night? I've called Sky to run some line checks and everything seems normal. I'm already at the master socket and done the usual checks. Now I'm starting to think that somewhere between my router (SR102) and Sky, there is some sort of scheduled 'link refresh' which makes the connection reset itself almost every single night. Anyone with a similar problem - any advice much appreciated.

Mine is the same but reset randomly (Disconnect and connect) about 20 + time a day. Rang Sky and done all test, I am thinking it was the Sky hub (Router) might have gone faulty but they not offer to replace it and want to do more check.
Mine once on smily face in Amber, it sometimes doesn't turn back to white which mean broadband is not connected at all. It has been 1 week now like this.

WRT120N - Randomly reboots

bought a cisco wrt120n few months back the firmware seems buggy for some reason not too sure if the folks from Cisco is addressing this issue?
http://homecommunity.cisco.com/t5/Wireless-Routers/WRT120N-Router-randomly-reboots/td-p/278237

Hi. I found a similar topic and after doing some troubleshooting, it seems that the router was defective.
http://homecommunity.cisco.com/t5/Wireless-Routers/WRT120N-wireless-capability-routinely-fails-and-r...
By any chance have you tried reflashing the latest firmware of the router?
If not, you can go to this article to follow the steps and see if that helps.

WRT1900AC - WiFi on 5GHz band *RANDOM REBOOTS*

I've noticed that this router is totally unstable (random reboots) on 5GHz band.
I'm using Lenovo ThinkPad T440p with build-in Intel(R) Dual Band Wireless-AC 7260 and it's unusable on 5GHz band using Mixed mode. I've setup to N-Only but it doesn't help, router reboots randomly while i'm surffing web.
Now i'm only using 2.4GHz band so router doesn't reboot at random.
Linksys please fix this issues!!!! this shouldn't happen on 300$ router!!!!
I'm running lastest 1.1.8.161917 FW

Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Was the router working before any firmware updates?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
What wireless modes are you using?
2.4Ghz and 5Ghz routers: Try single mode N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.metageek.net/support/metageek-software-archives/ to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
I've been using Mixed Mode on 5Ghz with my router and haven't had any issues. Possible envrionment or configuration issue or incompatibility issue with the ThinkPad....Please give feedback on question presented...lets see if we can find the problem.

Random reboots - T410 T510 Win7x64

I have 2 laptops, the T410 and T510, both with windows7 x64. Both suffer from random rebooting. The T410 did blue screen a lot, and a search revealed rolling back to older nvida drivers would solve the problem. Well, it did, mostly. I still get more reboots (Critical errors in the windows logs...event 41, kernel-power), just not nearly as frequent.
My T510 is only a week old, and suffers even worse from rebooting randomly. in this case, there is no .dmp file, no blue screen, it just reboots. The windows logs only reveal that it was a critical error and that the computer restarted. I tried turning off the autorestart, but it still restarts. It can be sitting on for 12 hours and reboot, or it can be once an hour - totally random. It can be while I am working on it, or just stilling idle. This machine has had all the latest driver updates from the lenovo website, and all the microsoft updates. I am running ubuntu live cd to see if a different OS will react differently - so far it runs without rebooting, but the randomness of the event makes me want to continue testing. The only item, I guess, that is not under stress is the hard drive (Hmmm...and the shock detection program....).
I can't imagine, that I - having 2 machines acting the same way - am the only one experiencing this. Any suggestions?
UPDATE!!!!
Thanks for the replies and the links. I have found the cause of the spontaneous rebooting. I have to (somewhat) apologize to Lenovo - not 100% your fault.
I have tracked the problem down to my Maxtor Shared Storage II network storage device. Now, this hard drive backup unit is hardwired to my router, but the laptops are only wirelessly linked to it. In any case, after weeks of adding/removing 1 program at a time and waiting for random reboots, the mystery is solved. Into the trashcan for the Maxtor.
Now, if someone wants to venture a guess how some sort of wirelessly sent network "code" can reboot Lenovo computers without so much as a log file being created (wake-on-lan shut off, magic packet disabled, etc., etc. - tried it all) - I'd be interested in hearing the details. I'm guessing it's a bit of a security issue??? Hardware? Software?

http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400s-random-shutdowns/m-p/144056#M13932
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

3750-24T-L randomly reboots without a cause

We have a WS-C3750X-24T-L switch that has 2 300W power supplies installed that is randomly rebooting its self about once a week. It is connected to a UPS, we have confirmed that the UPS and line power have not been interrupted at any time when the switch restarts. The logs show the switch was: Last reset from power-on. We have flipped the supplies positions in the switch and it still reboots. I have attached the output from running show tech.
Any ideas what may be going on?

Hi,
First off, I am trying to discard bug CSCtw50892, in which the switch shows "power-on" no matter what the actual cause is.
If there is a crash or anything, this bug does not allow us see the actual last reset reason.
Could you reload the switch via console out of business hours?
Switch#reload
Proceed with reload? [confirm] <<< (press enter)
Thereafter, you should see the following when typing "show ver"
Router uptime is 3 days, 18 hours, 39 minutes
System restarted by [reload cause]
System restarted by reload or system returned to ROM by reload
Let me go through the show tech and get back to you.
Kind regards,
- Ed

Cisco 7206vxr randomly rebooting

I have a cisco 7206vxr router that has been randomly rebooting.
This is the error I am getting.
System was restarted by bus error at PC 0x623F6FD0, address 0xB0D0B0D at 10:48:15 CST Fri Dec 17 2010
Reading through some stuff on the cisco site I see that the address shown is not a vaild memory location. Do any of you guys have any ideas?

CVFTC_7206#sh ver
Cisco IOS Software, 7200 Software (C7200-IS-M), Version 12.4(3), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 09:13 by hqluong
ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(15)B, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
CVFTC_7206 uptime is 2 days, 15 hours, 40 minutes
System returned to ROM by bus error at PC 0x623F6FD0, address 0xB0D0B0D at 16:28:24 CST Fri Dec 17 2010
System restarted at 16:31:04 CST Fri Dec 17 2010
System image file is "disk2:c7200-is-mz.124-3.bin"
Cisco 7206VXR (NPE-G1) processor (revision A) with 491520K/32768K bytes of memory.
Processor board ID 20402731
SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port
Adaptor Hardware Configuration Guidelines" on CCO ,
for c7200 bandwidth points oversubscription/usage guidelines.
3 Gigabit Ethernet interfaces
509K bytes of NVRAM.
62720K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

[RESOLVED] X58 Pro random reboots

I'm getting random reboots, sometimes every other day, sometimes several times a day; doesn't seem to have anything to do with what I'm working on.
I upgraded power supply thinking that might be it (430 to 650 watts), but still happening.
Support suggests upgrading bios from 7.1 to 7.3 but I'm wondering if I should check other stuff 1st?
Also concerned about losing my data because I have Raid 1 and allegedly upgrading the bios will cause me to reconfigure raid and possibly lose all data.
(I have a full backup but would rather not go that route if I don't have to).
X58 Pro
Core i7 920
Corsair xms3 DDR3 3 x 2GB (slots 1, 3, 5)
EVGA GeForce 9600 GSO 512
2 WD 640GB drives (raid 1)
LG DVD/RW
Sony usb card reader
Antec Earthwatts 650
Windows 7 RC-1 64 bit
(haven't changed any bios/cmos settings, no overclocking)
Successfully ran intel burn test.

The system just reboots, no screen errors.
I just looked in the event log and there are multiple warnings prior to the death spiral, mostly in the 500 range.
For example,
The Desktop Window Manager is experiencing heavy resource contention.
Reason   :   Graphics subsystem resources are over-utilized.
Diagnosis   :   A sharp degradation in Desktop Window Manager responsiveness was observed.
then,
The Desktop Window Manager is experiencing heavy resource contention.
Scenario   :   The Desktop Window Manager responsiveness has degraded.
and then,
The Desktop Window Manager is experiencing heavy resource contention.
Reason   :   Graphics subsystem resources are over-utilized.
Diagnosis   :   A consistent degradation in frame rate for the Desktop Window Manager was observed over a period of time.
There were 1/2 dozen of these warnings and then critical (where it rebooted).

[nforce] K7N2 Delta, having massive lock-ups / random reboots.

Hi all, it's been a while since I last needed your wisdom. Anyway, a couple of days ago my machine began to randomly reboot on me, so I went about trying to figure out what is causing the problem. I've cycled out my PSU, my drives, changed BIOS settings, so on and so forth, and it's still happening. System Specs follow:
MSI K7N2 Delta Mobo
Athlon 2800+ Processor
512 x 2 Kingston ValuRAM PC3200
Generic PSU : 3.3v : 28a, 5v: 30a
EVGA Nvidia Geforce 5950 Ultra 256 MB
Seagate 200GB 7200 RPM Hard drive
Lite-on DVD/CDRW Combo burner
Any ideas? I've been dismantling this thing and rebuilding it over and over for about a week now, and nothing has changed. I get the reboots all the time, graphic-intensive and not. I've even had the machine freeze up in the BIOS menu before. Help me please!!!

Quote from: sickfallout on 19-May-05, 02:38:49
Alright, thanks a lot guys for all your help!
Hi there..
I'm not sure if you have fixed the problem or not.....but i have the same board and my pc reboot maybe one or two times a day...
and i'm sure it is my Ram, and i also use 2x512mb Kingston Value pc3200
i have tried with 2x512mb crucial pc3200 from my other pc and then there is no problem...
ps. I haven't been writing in english for a long time.

Mid 2012 MacBook Air Troubles (Random Reboots & No Camera)

Hello, I'm hoping somebody can help me out. I have a mid 2012 Apple MacBook air that I am having problems with. Ever since I bought this laptop from my friend, it has randomly rebooted during sleep mode, and the FaceTime camera has not worked. I was told that water has been spilled on it at one point, but I have went over the entire computer and do not see any sort of damage. Because I was not having any luck getting it to quit the rebooting, and because the camera would not work, I purchased a replacement motherboard and battery.
The new parts arrived today, and I quickly installed them. I was instantly having the same exact problems. The computer will still reboot when I close the lid to put it in sleep mode. It instantly starts rebooting after about 2 to 3 minutes. And it will continue to reboot over and over until I reopen the lid. In addition the camera is still not detected, and I have double checked under the system properties that it is not showing up under the USB tab. I have cleared the PRAM & SMC, still no changes. As a last ditch effort, I decided to reinstall OSX 10.9 Mavericks as a fresh install. No go...
Does anyone have any ideas of what I can do to get this thing running properly? I bought it because I wanted to use it for some home-video editing, and in its current condition I don't feel that it is trustworthy. The only things left that I can replace, would be the display or the thunderbolt daughterboard. I already previously had replaced the SSD with a larger 256 GB, and I tried swapping out the wifi card as well. I'm banging my head against the wall here, and really want to be able to use this computer. Any help would be greatly appreciated!

BRPopilek wrote:... Does anyone have any thoughts? ...
Unless you get the answer you need here, I would contact Apple MacBook Air Support or an Apple-Authorized Service Provider for service.
Apple Service Technicians have access to all special tools, test equipment, parts, and proprietary data needed for efficient repairs. If cost is your issue, you can ask for an estimate before they proceed with any needed repairs.

Yosemite random reboots on macbook mid 2012

Well I've read thoroughly all the posts related to this kind of issue and it seems it affects a wide range of devices. Either mac minis or 2011 macbooks and so on.
I would like to explain my experience and ask for any advice available. I am experienced with computers and OS's, even though I would not call myself an expert, but as an engineer I possess a certain amount of knowledge. So there it goes.
TL;DR at the bottom
Macbook pro mid 2012 13". Default 4gb memory installed, I added a Samsung EVO 830 SSD in 2012 when I bought it, never had any problems with it.
After a couple of weeks after upgrading to yosemite (november '14) I started noticing the macbook resting on login screen after a reboot. No crash report, no message visible of any reason. As I was installing some special software to do some work related to a lab I was working at the time, I thought it was software related. MS Word and Excel often crashed and I had a couple of problems with other programs. Then it started doing it while I was working, so I decided to check things out. The system freezed for some seconds - 1-2 minutes and proceeded to reboot. Sometimes a hard reset had to be performed.
I decided to perform different installations with different options in order to identify the problem:
Reinstall Yosemite from recovery mode: same result, random reboot, no specific app in use, either Xcode, Safari, or just resting idle with just finder.
Format disk and install yosemite applying time machine backup: same result, random reboot, no specific app, and so on.
Format disk and clean install, manually installing the same main software installed previously: same result, random freezes and reboots.
Format disk and clean install, manually installing essential apps (mac app store only): same result, exactly the same result.
Always with the latest OS version available, and with TRIM enabled and disabled, to discard issues with it. PRAM and SMC resets all along.
During all the testing, the console has not shown any crash report or kernel panic related to the event. After every reboot, console would not show anything special before the boot_time line.
After looking for solutions on different forums, I noticed a pattern on some cases that implied a wake on lan or a handoff, or wifi issue. I tested on different networks, disabled and enabled all options commented, with no effect.
Entering
syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}'
on terminal 90% of the time returned errors -128, and some -112 or -2, but they would not be logged to every freeze, just some of them. By the time the
As they may indicate a hardware error, I decided to proceed with the warranty.I bought the Applecare extension when I bought the computer (expiring this summer) so I talked to Applecare about the issue. As there is not an official Apple Store in my town they pointed me to an ASP in my city. They noted all the issues I commented above, gave me a case number to deliver to the ASP so they would have all the information.
I brought the computer to the ASP, gave them the case number (which they totally ignored, the employee seemed oblivious to what a "case number" was) and expected them to find the error. As I noticed the freeze could be sometimes forced via waking up the laptop, I made them a demo. I had ran already the apple hardware test and any hardware tests I was aware of. Etrecheck came out without issues or anything worth mentioning, so I thought they might have specific apple tools to identify hardware error.
They told me they could not find any error on the computer, but that they found errors in the SSD, swapped it with one of theirs to test and no issues found. Good, I thought, at least they found the issue even though all tests run on the SSD by me did not show any trace of it. They charged me 25€ for the service as the SSD was not part of the original computer. As I had been experiencing issues for some time I did not care. I asked them for some kind of report to check the error to provide to the SSD manufacturer, Samsung, as they offer 3-year warranty on SSD's and it had not yet expired. The report said "errors in disk", plain and simple, I asked to talk to the technician for extra info, but he could not remember if it was "corrupted sectors" or something else.
Contacted Samsung, sent my SSD in, and in 4 days I had a new (refurb maybe) SSD same model same size at my door. During those 4 days I reinstalled my old original HDD. As it had a few miles on it (using it as external disk) it was really slow and sometimes it would freeze but the whole system was always dragging, so it could be also failing. Worth mentioning that when swapping disks I noticed the ASP had messed up the position of the small screws on the back of the computer. They did not seem to know there are 4 shouldered screws and 3 regular ones.
I put the new or refurb SSD in, clean install and do some testings. First day everything ok. Proceed to install software. Seems ok. After a couple of days the first freeze and reboot appears. After a couple of PRAM and SMC zaps, events seem to be reduced to a minimum. Even though the system is not completely stable, and I am not quite satisfied with the uncertainty of the freezes (in the middle of a presentation is not the best moment to have one), as it's freezing 1-3 times per week I consider it reasonable.
Time goes on, freezes start to appear again. Sometimes while booting, sometimes on login screen, sometimes on heavy usage sometimes on idle. I still follow all threads related to similar issues, in case a fix appears. All sleep / wake / wifi on - off on sleep tests have been performed.
Now the issue seems to be reduced to two kind of events: random freezes and reboots, and errors while booting. None, and I mean zero of the reboots or freezes has ever had a .crash or any system diagnostic reports related to the hour or even date when the freezes took place. EVER.
While booting, it crashes and I have to hard reset 2-3 times. When freezing, 30% of the time it does not reboot, and gets warmer than idle state but cooler than under heavy load.
I usually zap pram and smc and then it boots normally. But I should not have to be doing that every time I turn it on.
I know its a long post, but it's something I have been following for 5 months now. It's not that I am unaware of different options to solve it. Zapping seems to be the way to go, but still the random freezes interrupt workflow and provoke loss of data.
TL;DR: same freeze and reboots as other people. No discrete GPU to relate it to. Default memory installed, SSD model working on 10.8 and 10.9 with zero issues. All software installation combinations tested. ZERO crash reports on console related to the hour or date of the events. Shutdown causes negative codes, ASP cannot find the issue.
Considering bringing it to Genius Bar, but undermines the purpose of a ASP and if they got the same tools they will not find the issue either.
Appelcare expires in June. Any options I am unaware of? I would relate it to the specific model of SSD under Yosemite if I was the only one experiencing freezes and reboots, which I am not.
Thanks you

Boot into Safe Mode. If the problem ceases then you need to remove Virtual Box and the software that installed com.bluecoat.kext.bckd 4.4.1f20. If this does not fix the problem then make a Genius Appointment and take it in for service.

Early 2011 MBP 13 random reboots (no Kernel Panic logged)

Hi,
Problem Description:
My MacBook Pro randomly reboots at least 1-2 times a day. I cannot find a kernel log because each restart is a double one.
Let me explain the problem further : 1. Im doing something (nothing specific..no specific app) on the mac 2. The screen freezes and becomes unresponsive ( I know a reboot is coming)
3. I get the gray screen which says "Your computer restarted because of a problem..." ...this is followed by the white screen with the apple sign..it loads for a few seconds and it reboots AGAIN..this time i hear the chime...loads into the OS normally ...works until i either shut it down / put it to sleep / another random restart (varies from 1 hour to 6 hours )
Things I've tried :
SMC / PRAM reset
Erase Drive and TimeMachine Restore
Apple Hardware Tests / Diagnostics all pass
Verify / Repair permissions / disk (did this a million times)
Reindexed Spotlight
Erased Drive and did a clean install and MIGRATED files from TimeMachine
Safe Mode ( THIS did not have random reboots...also fyi ..i didn't try this for long)
Logs Data:
Since I don't have the .panic files. I am pasting a chunk of the log before and after the PROBLEM.
01/05/15 5:59:17.438 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c49fba0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c49f3f0> (PID 601)
01/05/15 5:59:22.006 pm CalendarAgent[197]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01/05/15 5:59:22.213 pm CalendarAgent[197]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01/05/15 5:59:34.254 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c20ecb0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59b9395a0> (PID 601)
01/05/15 6:00:06.297 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c20f710> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c20e910> (PID 601)
01/05/15 6:00:06.937 pm storeaccountd[223]: ADI: {
    "Access-Control-Allow-Origin" = "*";
    "Cache-Control" = "no-transform, max-age=56";
    Connection = "keep-alive";
    "Content-Encoding" = gzip;
    "Content-Length" = 11075;
    "Content-Type" = "text/html; charset=UTF-8";
    Date = "Fri, 01 May 2015 12:30:06 GMT";
    "Last-Modified" = "Fri, 01 May 2015 12:30:06 GMT";
    Server = "ATS/4.1.0";
    "Strict-Transport-Security" = "max-age=31536000";
    Vary = "X-Apple-Store-Front, Accept-Encoding";
    "X-Apple-ATS-Cache-Key" = "/17.173.38.161/80/in/app/extreme-road-trip-2/id592213926/iDevice/143467/13/htt ps?mt=12";
    "X-Apple-Partner" = "origin.0";
    "apple-timing-app" = "30 ms";
    "x-apple-aka-ttl" = "Generated Fri May 01 05:30:06 PDT 2015, Expires Fri May 01 05:31:06 PDT 2015, TTL 60s";
    "x-apple-application-instance" = 2126059;
    "x-apple-application-site" = ST11;
    "x-apple-jingle-correlation-key" = 3OMTSBGCRPXM67HMQNZSFXZJNQ;
    "x-apple-orig-url" = "https://itunes.apple.com/in/app/extreme-road-trip-2/id592213926?mt=12";
    "x-apple-translated-wo-url" = "/WebObjects/MZStore.woa/wa/viewSoftware?mt=12&id=592213926&cc=in&urlDesc=/extr eme-road-trip-2";
    "x-frame-options" = SAMEORIGIN;
    "x-webobjects-loadaverage" = 0;
01/05/15 6:00:06.948 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c210a90> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c20d9a0> (PID 601)
01/05/15 6:00:06.960 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c196c30> connection from pid 601 with interface <AccountServiceInterface: 0x7ff599437500> (PID 601)
01/05/15 6:00:06.967 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c18b410> connection from pid 601 with interface <AccountServiceInterface: 0x7ff599438560> (PID 601)
01/05/15 6:00:06.974 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c539b00> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c539cd0> (PID 601)
01/05/15 6:00:06.983 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c1b3da0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff5994a2530> (PID 601)
01/05/15 6:00:06.998 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c53ccd0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c53cf90> (PID 601)
01/05/15 6:00:07.006 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff599462520> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c17c0b0> (PID 601)
01/05/15 6:00:07.014 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c540020> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59967d410> (PID 601)
01/05/15 6:00:07.051 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c350fb0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59bbd8420> (PID 601)
01/05/15 6:00:07.065 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c1840a0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff599460b70> (PID 601)
01/05/15 6:00:07.071 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c173240> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c173570> (PID 601)
01/05/15 6:00:07.087 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c353980> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c354360> (PID 601)
01/05/15 6:00:07.107 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c175490> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c175740> (PID 601)
01/05/15 6:00:07.112 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c5428c0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c542b80> (PID 601)
01/05/15 6:00:07.118 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c176990> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c176c50> (PID 601)
01/05/15 6:00:07.123 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59971b650> connection from pid 601 with interface <AccountServiceInterface: 0x7ff599727cc0> (PID 601)
01/05/15 6:00:07.129 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c546100> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c5459e0> (PID 601)
01/05/15 6:00:07.135 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff599722f20> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c0251e0> (PID 601)
01/05/15 6:00:07.140 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c026c30> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59972a5b0> (PID 601)
01/05/15 6:00:07.149 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c4a52e0> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c4a5df0> (PID 601)
01/05/15 6:00:07.160 pm storeassetd[338]: AssetServiceDelegate: Accepting new connection <NSXPCConnection: 0x7fdce06843d0> connection from pid 601 with interface <AssetServiceInterface: 0x7fdce066b6a0> (PID 601)
01/05/15 6:00:14.710 pm storeaccountd[223]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff59c357510> connection from pid 601 with interface <AccountServiceInterface: 0x7ff59c357e40> (PID 601)
01/05/15 6:00:59.000 pm bootlog[0]: BOOT_TIME 1430483459 0
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.awdd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.callhistory.asl.conf" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.cloudd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.clouddocs" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.commerce.asl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.CoreDuetAdmissionControl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.family.asl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.ical" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.icloud.FindMyDevice" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.networking.symptoms" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.networking.symptoms" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.secinitd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
01/05/15 6:01:23.000 pm kernel[0]: Longterm timer threshold: 1000 ms
01/05/15 6:01:23.000 pm kernel[0]: PMAP: PCID enabled
01/05/15 6:01:23.000 pm kernel[0]: Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
01/05/15 6:01:23.000 pm kernel[0]: vm_page_bootstrap: 1308015 free pages and 256657 wired pages
01/05/15 6:01:23.000 pm kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
01/05/15 6:01:23.000 pm kernel[0]: zone leak detection enabled
01/05/15 6:01:23.000 pm kernel[0]: "vm_compressor_mode" is 4
01/05/15 6:01:23.000 pm kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
01/05/15 6:01:23.000 pm kernel[0]: standard timeslicing quantum is 10000 us
01/05/15 6:01:23.000 pm kernel[0]: standard background quantum is 2500 us
01/05/15 6:01:23.000 pm kernel[0]: mig_table_max_displ = 13
01/05/15 6:01:23.000 pm kernel[0]: TSC Deadline Timer supported and enabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
01/05/15 6:01:23.000 pm kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
01/05/15 6:01:23.000 pm kernel[0]: calling mpo_policy_init for TMSafetyNet
01/05/15 6:01:23.000 pm kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
01/05/15 6:01:23.000 pm kernel[0]: calling mpo_policy_init for AMFI
01/05/15 6:01:23.000 pm kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)
01/05/15 6:01:23.000 pm kernel[0]: calling mpo_policy_init for Sandbox
01/05/15 6:01:23.000 pm kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
01/05/15 6:01:23.000 pm kernel[0]: calling mpo_policy_init for Quarantine
01/05/15 6:01:23.000 pm kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
01/05/15 6:01:23.000 pm kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
01/05/15 6:01:23.000 pm kernel[0]: The Regents of the University of California. All rights reserved.
01/05/15 6:01:23.000 pm kernel[0]: MAC Framework successfully initialized
01/05/15 6:01:23.000 pm kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
01/05/15 6:01:23.000 pm kernel[0]: AppleKeyStore starting (BUILT: Dec 22 2014 23:20:35)
01/05/15 6:01:23.000 pm kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
01/05/15 6:01:23.000 pm kernel[0]: ACPI: sleep states S3 S4 S5
01/05/15 6:01:23.000 pm kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
01/05/15 6:01:23.000 pm kernel[0]: AppleIntelCPUPowerManagement: (built 23:20:47 Dec 22 2014) initialization complete
01/05/15 6:01:23.000 pm kernel[0]: pci (build 23:16:47 Dec 22 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
01/05/15 6:01:23.000 pm kernel[0]: [ PCI configuration begin ]
01/05/15 6:01:23.000 pm kernel[0]: console relocated to 0xf80000000
01/05/15 6:01:23.000 pm kernel[0]: [ PCI configuration end, bridges 12, devices 16 ]
01/05/15 6:01:23.000 pm kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
01/05/15 6:01:23.000 pm kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
01/05/15 6:01:23.000 pm kernel[0]: rooting via boot-uuid from /chosen: A1126FF0-6322-3537-BAF8-8E5FD53F1C61
01/05/15 6:01:23.000 pm kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
01/05/15 6:01:23.000 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
01/05/15 6:01:23.000 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
01/05/15 6:01:23.000 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
01/05/15 6:01:23.000 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
01/05/15 6:01:23.000 pm kernel[0]: AppleIntelCPUPowerManagementClient: ready
01/05/15 6:01:23.000 pm kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffef9ef16; max speed s800.
01/05/15 6:01:23.000 pm kernel[0]: BTCOEXIST off
01/05/15 6:01:23.000 pm kernel[0]: BRCM tunables:
01/05/15 6:01:23.000 pm kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
01/05/15 6:01:23.000 pm kernel[0]: CoreStorage: fsck_cs has finished for group "71FD7735-E3F8-4D96-8C91-C56BE7F42E02" with status 0x00
01/05/15 6:01:23.000 pm kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545032B9A302 Media/IOGUIDPartitionScheme/MacHD@2/CoreStoragePhysical/MacHD/MacHD
01/05/15 6:01:23.000 pm kernel[0]: BSD root: disk1, major 1, minor 5
01/05/15 6:01:23.000 pm kernel[0]: hfs: mounted MacHD on device root_device
01/05/15 6:01:23.000 pm kernel[0]: VM Swap Subsystem is ON
01/05/15 6:01:23.000 pm kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
01/05/15 6:01:23.000 pm kernel[0]: hfs: Removed 69 orphaned / unlinked files and 80 directories
01/05/15 6:01:11.914 pm com.apple.xpc.launchd[1]: (com.apple.audio.coreaudiod) Unknown key for array: seatbelt-profiles
01/05/15 6:01:11.914 pm com.apple.xpc.launchd[1]: (com.apple.alf) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
01/05/15 6:01:18.453 pm fseventsd[20]: event logs in /.fseventsd out of sync with volume. destroying old logs. (2030 19 2082)
01/05/15 6:01:11.914 pm com.apple.xpc.launchd[1]: (com.apple.auditd) The TimeOut key is no longer respected. It never did anything anyway.
01/05/15 6:01:18.453 pm hidd[68]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
01/05/15 6:01:18.454 pm iconservicesagent[37]: iconservicesagent launched.
01/05/15 6:01:11.914 pm com.apple.xpc.launchd[1]: (com.apple.autofsd) This service is defined to be constantly running and is inherently inefficient.
01/05/15 6:01:18.455 pm hidd[68]: IOHIDService compatibility thread running at priority 63 and schedule 2.
01/05/15 6:01:23.740 pm watchdogd[30]: [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
01/05/15 6:01:23.740 pm watchdogd[30]: [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
01/05/15 6:01:11.915 pm com.apple.xpc.launchd[1]: (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
01/05/15 6:01:11.915 pm com.apple.xpc.launchd[1]: (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
01/05/15 6:01:11.915 pm com.apple.xpc.launchd[1]: (com.apple.bsd.dirhelper) The TimeOut key is no longer respected. It never did anything anyway.
01/05/15 6:01:11.916 pm com.apple.xpc.launchd[1]: (com.apple.cmio.AVCAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.
01/05/15 6:01:11.916 pm com.apple.xpc.launchd[1]: (com.apple.cmio.IIDCVideoAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.
01/05/15 6:01:11.916 pm com.apple.xpc.launchd[1]: (com.apple.cmio.VDCAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.
01/05/15 6:01:11.916 pm com.apple.xpc.launchd[1]: (com.apple.configd) This service is defined to be constantly running and is inherently inefficient.
01/05/15 6:01:11.917 pm com.apple.xpc.launchd[1]: (com.apple.coreduetd) This service is defined to be constantly running and is inherently inefficient.
01/05/15 6:01:11.917 pm com.apple.xpc.launchd[1]: (com.apple.CoreRAID) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
01/05/15 6:01:11.917 pm com.apple.xpc.launchd[1]: (com.apple.CoreRAID) The ServiceIPC key is no longer respected. Please remove it.
01/05/15 6:01:23.740 pm watchdogd[30]: [watchdog_daemon] @(                main) - cannot initialize the watchdog service
01/05/15 6:01:11.917 pm com.apple.xpc.launchd[1]: (com.apple.coreservicesd) The HopefullyExitsLast key is no longer respected. Please remove it.
01/05/15 6:01:23.954 pm com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
01/05/15 6:01:23.974 pm watchdogd[80]: [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
01/05/15 6:01:23.974 pm watchdogd[80]: [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
01/05/15 6:01:23.974 pm watchdogd[80]: [watchdog_daemon] @(                main) - cannot initialize the watchdog service
01/05/15 6:01:23.975 pm com.apple.xpc.launchd[1]: (com.apple.watchdogd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
01/05/15 6:01:24.037 pm iconservicesagent[37]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices
01/05/15 6:01:24.064 pm hidd[68]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x102987000
01/05/15 6:01:24.064 pm hidd[68]: HID Session async scheduling initiated.
01/05/15 6:01:24.064 pm hidd[68]: HID Session async root queue running at priority 63 and schedule 2.
01/05/15 6:01:24.071 pm iconservicesd[36]: iconservicesd launched.
01/05/15 6:01:24.072 pm iconservicesd[36]: Cache path: /Library/Caches/com.apple.iconservices.store
01/05/15 6:01:24.094 pm hidd[68]: HID Session async scheduling complete.
01/05/15 6:01:24.094 pm hidd[68]: Successfully opened the IOHIDSession
01/05/15 6:01:25.000 pm kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
01/05/15 6:01:25.000 pm kernel[0]: IO80211Interface::efiNVRAMPublished():
01/05/15 6:01:25.000 pm kernel[0]: bpfAttach len 64 dlt 12
01/05/15 6:01:25.920 pm opendirectoryd[45]: BUG in libdispatch: 14C109 - 2004 - 0x5
01/05/15 6:01:25.949 pm com.apple.usbmuxd[51]: usbmuxd-344.5 on Dec 5 2014 at 17:02:22, running 64 bit
01/05/15 6:01:26.120 pm com.apple.SecurityServer[52]: Session 100000 created
01/05/15 6:01:26.000 pm kernel[0]: IOGraphics flags 0x43
01/05/15 6:01:26.000 pm kernel[0]: IOBluetoothUSBDFU::probe
01/05/15 6:01:26.000 pm kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
01/05/15 6:01:26.000 pm kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x1000 ****
01/05/15 6:01:26.000 pm kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0x1000 ****
01/05/15 6:01:26.000 pm kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x1000
01/05/15 6:01:26.000 pm kernel[0]: [IOBluetoothHCIController][start] -- completed
01/05/15 6:01:26.000 pm kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
01/05/15 6:01:26.000 pm kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xc600 -- 0x0000 -- 0x1000 ****
01/05/15 6:01:27.000 pm kernel[0]: Previous shutdown cause: -62

You really don't need to post multiple times, you will get attention eventually.
Find the reply here:
MacBook Pro 13 (MBP 8,1 random restarts)

IPad 2 16GB iOS 5.1.1 Randomly reboots???

I just got an ipad 2 16GB, brand new I installed the IOS 5.1.1 right when I opened it up. But ever since I turned it on it is now randomly rebooting itself. For no reason, just crashes and then shows the apple sign? What should I do?

First thing I would try is to do a restart of your own, Hold the home button down and at the same time hold down the power button. Wait for the screen to go black and the Apple logo to appear and in a few minutes it should restart.
If you have already done this I would do a reload of the OS from iTunes.
If that doesn't work I would take it to Apple and have them do a refresh of the OS or replace it if there is a hardware problem.
Good luck.

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password

E2500 router random reboots

Similar Messages

Maybe you are looking for