E2500 with no guest password prompt

Try as I may, I cannot get the guest has no password or other security.
I reset the router to factory defaults.
I made sure it had the latest firmware.
I turned off guest wifi then turned it back on.
Guests CAN get online just fine, but it never prompts for the password that clearly shows on the relevant page.
Can anyone help me get it working with a password? 

By default, the guest password when using E2500 is ‘guest’ all in lower case. You can verify it or even change this default password on the router’s setup page, Wireless tab>>>>Guest Access sub tab. The guest network is broadcasting as unsecured but when you connect to it and access a webpage, it is then that you will be asked for the guest password. And there is no need to worry since the guest network is different from the main wireless network. The devices connected to the guest network can’t see the devices connected to the main wireless network or vice versa, this is because they are not on the same IP range. The guest computers will be having an IP of 192.168.33.xx or 192.168.3.xx and the IP from the main wireless network is 192.168.1.xx, if the default IP address of the router was not changed. And please try to make sure that your wireless adapter is not connected to the main wireless network when you connect to the guest network, you might be connect to your main wireless network that is why you were able to go online wirelessly even if you select the guest network, it would be best to delete preferred wireless network if you will try the guest network.

Similar Messages

  • HT1430 My iphone 3 is stuck with the voicemail password prompt on the screen.

    The screen is stuck with the password prompt on screen, will not enter or cancel and the prompt covers the power off swipe bar if I try to restart it. HELP

    I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

  • When I check my yahoo I am prompted with a different password prompt and when I go to mail and try to enter my password it prompts with server unavaibel please try later

    My yahoo prompts me with some one else's password request, and when I go to mail and put my password in it prompts with (server unavaibel please try later)?

    try and delete the account and re-add it by going inot settings> mail contact and calendars

  • Firefox master password prompt appears randomly

    Every time I open Firefox, the Master Password prompt appears randomly within about 30 seconds. Sometimes I'm still sitting on the home screen when I get the prompt.
    I have tried to refresh Firefox, reinstall Firefox, I've turned my Master Password requirement on and off, restarted the computer... nothing seems to work.
    I would either like the prompt right away, as soon as I open my browser, or when it is actually required, like when I open a login page. Not the current, seemingly random appearance that disrupts me in the middle of web browsing.
    This bug is so annoying that it is a deal breaker for me. It's especially annoying when I am starting to type something, then the Master Password prompt appears without warning and takes the cursor focus with it. I have to stop what I'm doing, deal with the Master Password prompt, then get back to what I'm doing.
    In the meantime, I've switched over to Chrome, which is serving my needs fine, but I would like to come back to Firefox if I can resolve this issue.

    Hi Will,
    Are you using Firefox Sync?
    In order to keep your sync login details secure, you have to unlock your master password before Firefox can synchronise.

  • [SOLVED] Password prompt appears twice at boot up login

    I boot up to the regular text login and startx manually. I recently updated after perhaps 4-5 days days and updated my /etc/*.conf.pacnew files as well.
    After rebooting, I was presented with the text login, entered my username and password, and after pressing enter was presented with the same password prompt again. I re-entered my password and was presented with the prompt as usual. Any suggestions on what files might have led to this? I merged /etc/pam.d/login with /etc.pam.d/login.pacnew (which had many fewer lines). Could there be a line in there that's causing this? I'm not familiar with what controls the text login at boot.
    Last edited by jwhendy (2012-09-14 21:59:13)

    Here is part of my auth.log . First I logged as a root on tty3 and then logged off and logged again as a regular user. Login session was started twice in both cases. The very end is unclear to me, some messages from gnome-shell. Not sure if they are related at all.
    Sep 8 20:33:14 localhost login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Sep 8 20:33:14 localhost login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Sep 8 20:33:14 localhost login: pam_ck_connector(login:session): process already registered with ConsoleKit
    Sep 8 20:33:14 localhost login: ROOT LOGIN ON tty3
    Sep 8 20:33:17 localhost login: pam_unix(login:session): session closed for user root
    Sep 8 20:33:17 localhost login: pam_unix(login:session): session closed for user root
    Sep 8 20:33:17 localhost login: pam_mail(login:session): pam_putenv: delete non-existent entry; MAIL
    Sep 8 20:33:23 localhost login: pam_unix(login:session): session opened for user mcmilton by LOGIN(uid=0)
    Sep 8 20:33:23 localhost login: pam_unix(login:session): session opened for user mcmilton by LOGIN(uid=0)
    Sep 8 20:33:23 localhost login: pam_ck_connector(login:session): process already registered with ConsoleKit
    Sep 8 20:33:23 localhost login: LOGIN ON tty3 BY mcmilton
    Sep 8 20:33:25 localhost login: pam_unix(login:session): session closed for user mcmilton
    Sep 8 20:33:25 localhost login: pam_unix(login:session): session closed for user mcmilton
    Sep 8 20:33:25 localhost login: pam_mail(login:session): pam_putenv: delete non-existent entry; MAIL
    Sep 8 20:33:26 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.32" (uid=1000 pid=1535 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:26 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.32" (uid=1000 pid=1535 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:27 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.32, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale ru_RU.UTF-8) (disconnected from bus)
    Sep 8 20:33:29 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:30 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.45 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale ru_RU.UTF-8)
    Sep 8 20:33:32 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:32 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:32 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:32 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Sep 8 20:33:33 localhost dbus[442]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.45" (uid=1000 pid=2192 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=1332 comm="/usr/sbin/console-kit-daemon --no-daemon ")

  • Attempts to use public/guest wifi yields password prompt webpage

    I've had my iPhone 4s for about a month and have been unable to connect to any guest wifi accounts.  EVERY time I get a webpage prompting me to ask the business for a password, rather than the page requiring that I agree not to use their connection for any illegal activities.  I have no trouble connecting to our home wifi, since I've already provided the password.
    I previously had a Droid and never encountered such a page.  I've googled and found not a single reference to this issue, either.

    See...and this is what makes no sense.  No one else is receiving this prompt in the same scenario at the same moment.  I have received this very same prompt from every place with free/guest wifi service.  I haven't once been able to access free wifi since purchasing this phone.  I never before had to enter a password with my previous phone and no one sitting at the same table with me is being required to enter a password to utilize the same wifi connection.  It has to be the phone.  Nothing else makes any sense.  Occam's Razor, and all.
    I guess now I need to figure out if this is an issue to take up with Verizon or with Apple.

  • Password prompt Error with Bex and Excel 2007

    Hi Guru's,
    We have a problem with end users that have the Bex add-in loaded in Excel 2007 when they are using a different 3rd party add-in.  The problem is when they close Excel, they get password prompted for a password protected VB project in the workbook.
    I found a MSFT article that sounds exactly like the problem I'm seeing.  Link is below. 
    [http://support.microsoft.com/kb/280454]
    Has anyone experienced this problem?
    Thanks
    Brian Winterlich

    Hi Brian:
    Take a look at SAP Note 1397278 - "BPC: Pop-up window prompting for a password to unprotect the sheet in Journal template with Office 2007 SP2".
    Regards,
    Francisco Milá

  • Need MBAM 2.5 Helpdesk and selfservice sites to open for authenticated users with no password prompt

    I Need MBAM 2.5 Helpdesk and self service sites to open for authenticated users with no password prompt. I just cant seem to get this to work. The account used in the application pool has its SPN registered and delegation set. I can use that account to login
    to the sites but am prompted for a password. That said anyone I add into the helpdesk users group cannot negotiate the sites. Only the account I have set in the application pool can. I want domain authenticated users that have been added to the MBAM Help Desk
    Users group to negotiate the site with NO password challenge at all.
    tconners

    This generally means that your SPN is not set up correctly.  Let's say the web server you installed the SSP on is lance.contoso.com and your app pool creds are corp\lance.  You should set an SPN similar to setspn -s http/lance.contoso.com
    corp\lance.  In your browser, you should now be able to access the SSP without prompts.  However, if you still get prompted, generally that means that your local intranet zone in IE does not have an entry for *.contoso.com.  Since you are entering
    an FQDN in your browser, IE interprets the "." to mean "on the internet" which breaks Kerberos authentication.  By adding *.contoso.com to your local intranet zone, you are telling it that lance.contoso.com is on the intranet, so use
    Kerberos.
    I can confirm, that I have exact configuration and I always get the password promt for the very first time. We have 2 server (1xIIS and 1xSQL) infrastructure in production with SPN set like it should and I get the password prompt.

  • When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

    Hi
    When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

    When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

  • Applescript "with administrator privileges" and without Password prompt

    i,
    I have to configure some phone settings in the central VOIP/VPN/Gateway Router via a ssh (with certificate) command.
    There is only a option to allow or disallow the ssh access in the router. Therefor I wrote a applescript to allow only the specific ssh command "set /Setup/Voice-Call-Manager/Call-Router/Call-Routing/". To avoid the configuration access for anyone and to hard code passwords I have to execute this script with root permissions (do shell script "/usr/bin/su - " & user & " -c " & "'" & cmd & "'" with administrator privileges"). In any other unix implementation I can use "chmod 4755; chown 0:0". Even I compiled the Applescript and stored it as Carbon App, I get a user/password prompt.
    How can I avoid this prompt or authorize the script/app in any way?
    Thanks Henri

    I agree, but to use the private key of the applescript caller opens any user the ability to change any WLAN key, VPN settings or delete the admin account, not a good idea....
    Therefor I would like to run the applescript with root, "su - <adminuser> ssh router set ....".
    This restricts the access to the router config to this applescript and I would like avoid the hard coding of the root password in the applescript.
    I tried also the add the command to /etc/sudoers, this work fine from the command line but how to call "sudo applescript" from the desktop without entering the admin password?
    Thanks
    Henri

  • XP pro file sharing and guest password - how to enable guest password?

    Hi,
    I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password.
    Here's a description of my setup:
    I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (finnish) and a brand new Thinkpad T61 (TP) running on Windows XP pro (english). Both of theses computers have guest account enabled and these accounts have also been password protected. FS's guest account is called "vieras" because of the language settings and TP's guest account is of course just "guest". Guest account passwords have been enabled using "net user <user name> *".
    I've disabled simple file sharing on both computers, set shared folder permission to only contain these users: TP - "Guest (TP\Guest)" and FS - "Vieras (FS\Vieras)". Both computers have F-secure on them so I've made firewall rules which enable following services both ways to a specific IP: Ping / ICMP echo request and reply ; Windows file sharing and network printers ; Windows network browsing ; ICMP / Internet Control Message Protocol. I've also enabled these services on Windows firewall.
    These computers can connect to each other either via Wi-Fi access point (b-mode) or directly using an ad-hoc Wi-Fi configuration (g-mode). Obviously the latter is used for more bandwidth hungry file transfers. Also, sometimes a cross-over Ethernet cable is used as well for even faster file transfers.
    Everything on my setup works just fine except just one thing. I connect to a shared resource by running the computer's IP address. When I connect from TP to FS it prompts for username and password. FS accepts both english and finnish names for  the guest account provided that the password is correct. But here's the problem... When connecting from FS to TP _no password or username prompt appears_. If I browse TP's shared folder sessions (under My Computer -> manage) I can see that FS is logged on as "vieras" i.e. FS's guest account.
    Since I enabled FS's network shares over a year a go I can't remember everything I did to make it work. Every relevant configuration on TP and FS seem to be identical (e.g. "Security settings -> local policies -> security options -> Accounts: limit local account use of blank passwords to console logon only -> enabled") but still TP accepts connections without password prompt.
    I've tried to get TP's password prompts enabled for a while now without any success. I did a lot of searching on the subject but I could only find instructions on how to disable guest account password prompts for network shares.
    Has anyone had similar experiences or does anyone know what I should try out next? Thanks...
    Solved!
    Go to Solution.

    Success!
    I solved my problem by changing guest account passwords. I tried to keep things simple by using the same guest password on both computers. This however allowed FS to log on to TP without guest password for some unknown reason. My logic would tell me that having the same guest password would allow both computers to log in without password but this wasn't obviously the case. I guess Windows has its own logic that I can't figure out or this issue had something to do with different language setups. Anyhow my shares work now like I want them to work.

  • [Solved] Help Setting Samba Share In Qemu With XP Guest

    Hello all,
    After getting around all the quirks of setting an XP guest inside qemu, the only (though, pretty important) thing I can't solve is setting a samba share between the Arch host and the XP guest.
    I tried whatever I could think of that's relevant, with no success:
    Qemu is launched with:
    qemu-system-x86_64 -machine type=pc,accel=kvm -cpu host -boot d -m 1024 -net user,smb={my home folder} -net nic,model=virtio -rtc base=localtime -drive file=XP.qcow2,if=virtio -spice port=5900,disable-ticketing,image-compression=off,jpeg-wan-compression=never,zlib-glz-wan-compression=never,playback-compression=off -vga qxl -global qxl-vga.vram_size=67108864 -device virtio-serial-pci -device virtserialport,chardev=spicechannel0,name=com.redhat.spice.0 -chardev spicevmc,id=spicechannel0,name=vdagent -balloon virtio
    I installed samba, added a user, and started the service according to the wiki.
    I allowed the samba ports in UFW (using the CIFS rule).
    Whenever I try accessing the share inside my XP guest (\\10.0.2.4\qemu), I usually end up with a target not found error, or at times, a password prompt that will not accept the samba user/password.
    Anything else I forgot to do?
    Thanks, Adam.
    * EDIT *
    I somehow missed the section regarding the guest OS able to access the host OS normal samba shares at 10.0.2.2.
    Default samba share for home folder works as expected.
    Last edited by adam777 (2013-07-15 16:05:44)

    Thanks.
    I tried toying with the options a bit more, with no success.
    I then decided to try Spice+QXL anyway, and am very happy with it.
    Aside from the lengthy compilation of the Qemu version that supports Spice from the AUR, once I got it set up, installing the guest was a breeze.
    Using the Spice guest tools for windows, everything was set up very conveniently (virtio for network, hdd, qxl driver, mouse integration etc.).
    Responsiveness is much better comparing to previous attempts with "vga std", "vga cirrus" and normal adapter.
    Bottom line, I'm sticking with Spice+QXL, seems to work best for me.

  • How do i stop an old apple ID and password prompt from always popping up on my phone during normal use ?

    How do i stop an old apple ID and password prompt from popping up on my phone screen during normal operations ?

    How to change the Apple ID on my iOS Device
    Settings > iTunes & App stores.
    Tap your Apple ID, sign out then sign back in with new AppleID.
    Settings > Facetime.
    Tap your Apple ID, sign out then sign back in with new AppleID.
    Settings > Messages.
    Turn off iMessages, wait 10 seconds, then turn it back on.  Go to 'Receive messages at' and then tap your Apple ID.  Sign out of the old ID, then sign in with new Apple ID.
    Settings > iCloud.
    Delete the account (make sure to KEEP the information on your phone), then turn it back on with new Apple ID.
    Also, delete any apps that were downloaded with the 'old' Apple ID, then reinstall them with your 'new' ID.

  • I changed my appleID and primary email and now I can not access anything. iphone shows my old appleID and I can't log in with my old password but I can not log out and log in with new ID. How do I get iphone to work with my updated ID?

    My old nternet account was cancelled and with it my emails. I updated my apple id and password in all my devices (ipad, iphone, imac, except for my moms iphone. I am trying to log out from my old account and set her up with her own apple ID and iCloud etc but it does not let me log out. I have a notebook with all my passwords in it so I know for a fact the password for the old ID/ email is correct yet a window keeps popping up that it is incorrect. I have spent hours reading and trying to fix it myself and nothing is working, same window keeps popping up. Any ideas on what to do? I have an iphone 4S, all software up to date and I made sure my moms phone is also updated. Thank you, any help is greatly appreciated.

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • Computer Shuts Down At BitLocker Boot Password Prompt

    Hi All,
    I have been using this computer for almost 6 months now with absolutely no problems until I encrypted my system drive with BitLocker. I am not using a TPM. Now, almost every time I get to the password prompt for BitLocker at boot, my computer turns completely
    off. I am using an ASUS Z97-E. ASUS tech support was completely useless and wanted to pass the blame instead of help, so I guess I'm on my own as far as their support.
    I have read previously that this may be related to ASUS products. I cannot seem to get it to boot reliably. If I completely remove power from the machine by unplugging it, sometimes that will give me enough time to enter my password. If I don't, often, it
    will only give me a couple seconds (and my password is pretty long) before shutting down.
    I have tried disabling Secure Boot and that seemed to help at first but then the problem came right back.
    There is a BIOS update available but I'm not confident it will fix the problem.
    Are there any specific BIOS settings I can change to make BitLocker stop making my computer shut down? Any Windows settings I can change that might help? 
    I'd really like to keep my data encrypted but I'm not sure if this hassle is worth it.

    Hi,
    Based on my research, this is a firmware problem. It does not matter what authentication method (TPM/without TPM/PIN+TPM/Password only/...) is used, it leaves you only some seconds before it shuts down.
    It's recommend you contact ASUS tell them to try and reproduce it. They would need to fix their BIOS.
    In addition, we could try to disable "fast startup" as below steps to see if it could be as a workaround:
    1.In Control Panel, open the Power Options item.
    2.Click the Choose what the power buttons do link.
    3.Clear the Turn on fast startup (recommended) check box.
    4.Click Save Settings.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for