E2E RCA config

Hi,
We have installed necessary agents. Now we are doing configuration.
What SLD configuration is required for RCA part.
In Our solution manager -> RZ70 is set to some other system. If we perform SLD J2ee config under solman_setup -> initial configuration this will effect the settings in solution manager systems or the systems connected to it?
Thanks,
Rohan

Hi Rohan,
It is better if you can use your solman SLD as your central SLD . If you have any other central SLD , use the SLD bridge concept to provide SLD data to Solution manager SLD .
Referr http://help.sap.com/saphelp_nwesrce/helpdata/en/43/da21ba13660aa5e10000000a1553f6/content.htm for more details .
Regards,
Nibu Antony

Similar Messages

SAP certifications for E2E RCA, change management

Hi,
I wanted to find out if the skill sets required for implementing E2E RCA and Change management really require training and certification. I am being asked to do it.
Is this a hot skill set to acquire, are many people implementing RUN SAP for Support.

Hi, yes, its going to be a hot skill considering the facts about the Run SAP and the tool being under the methodology is the Solution manager. It provides functionality and support operation tools that will assist in operations of large sap solutions quickly and efficiently.
http://download.sap.com/services/bysubject/support/brochures/download.epd?context=A868467FD491523D39B275AEAFD72EAED1F5B2A981D54AD33AF85A62DF0CCB8D7E73D3A29D48B6C0D62F2C64D8543DB62F259430DECDB024
Regards,
Debasis.

E2E RCA for Legacy systems

Hi All,
I am going to implement RCA for legacy systems. What steps need to be considered to implement it on legacy systems.
Where can i find document for this?
Your help will be appreciated.
Thanks,
Rohan

Hi Rohan,
You can get ref. from Solution manager master config. guide .
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000112&_SHORTKEY=00200797470000075728&_OBJECT
thanks
Gyan

E2E RCA - The requested query / does not exist on the current server

Hi All,
The RCA for managed system is configured successfully and we are getting EWA for JAVA also.
But when i try to look at the statistics through Workload Analysis it gives error "The requested query / does not exist on the current server" and "unknown or deleted query".
I again tried to run CCMSBI_SETUP_E2E report but the problem STILL persists.
Please let me know what are the other methods i shall try.
Thanks,
Rohan

Hi,
Our solution manager is in EHP1 SP23 and BI content is on 704 SP05.
Firstly the BI was configured in 001 client, we changed it to production client and activated the source system as mentioned in SOLMAN_SETP -> Basic configuration.
Later i found out the there are no queries. I already told to update the BI content and SAP BW patch to SP06.
Do you think it will work?
Thanks and regards,
Rohan

CALL_FUNCTION_NOT_REMOTE in E2E RCA for XI

Hello everybody.
I get a dump when the diagnostics extractor runs. Below the dump:
Runtime Errors         CALL_FUNCTION_NOT_REMOTE
Short text
    The function module "E2E_WS_EXTRACTOR_XI_AF_WRKL" cannot be used for 'remote'
What happened?
    The function module "E2E_WS_EXTRACTOR_XI_AF_WRKL" was called via RFC,
    but is not flagged as being able to be used for remote calls.
It looks this function module should be flagged as "RFC-enabled"; it looks a standard bug; has anybody faced this error?
Thanks a lot for your answers,
Fermí

Yes, I am experiencing the same problem. Here is SAP Global Support's recommendation when I opened a ticket for this:
The problem with "E2E_WS_EXTRACTOR_XI_AF_WRKL" most probably indicates
that some steps related to BI setup were not completed successfully.
Could you check RCA installation and upgrade guide,
Chapter 6.2.2 Activate BI source system
Possible reason is misconfiguration for SMD related RFC connection.
This really did not help much because as far as I can tell my setup is correct. Have you been able to solve the problem?

Solman E2E RCA implementation

Gurus,
We are heading to implement RCA in our landscape.. WE have Solman EHP1 at SPS22
I have done homework and formulated below steps to implement RCA
1. Install SMD agents in all managed systems
2. Install SAP HOST AGENT in managed systems (if it is not present, SAPHOSTAGENT is needed for SMD agent 7.11..... Is SAPHOSTAGENT needed in solman also???/)
3. Install Wily Introscope EM in Solman
4. Run SOLMAN_SETUP
i. This will install Wily Introscope agents in managed systems automatically
IS the above sequence is correct for RCA? or did I miss anything here?
I am bit confused about installing Wily introscope agents... how Solman will install them in managed system automatically during solman_setup? Will it download the agent sca file from smp and install in the managed system?
BR
Vardha

==================================================================================================
2. Install SAP HOST AGENT in managed systems (if it is not present, SAPHOSTAGENT is needed for SMD agent 7.11..... Is SAPHOSTAGENT needed in solman also???/)
It's necessary install SapHostagent if you're running diagnostics agent 7.11 or a lower version. With 7.20, saphostagent will come installed automatically.
==================================================================================================
You must deploy the ISagent in Solution Manager System and when the agents of managed systems connect in Solution Manager, ISAgent will be deployed and updated automatically in all systems that are connecting in Solution Manager system.
Example:
When you'll execute an update of your solution manager and you updated components LM-SERVICE and ISAGENT. To execute this procedure you must enable "Maintenance Mode", in this case, all agent will be disconnected.
When you finish the upgrade of these components in your solution manager and you disable the Maintenance Mode, all agents will connect in solution manager system and will check that there's a newer version of ISAGENT and LM-SERVICE and all diagnostics agents and ISagents will be updated automatically.
If you check the log files of Diagnostics you'll see this deployment being executed automatically.
For more details check http://service.sap.com/diagnostics

Solman E2E diagnostics and Wily Introscope.

Does anybody have any time scales for setting up Solman Diagnostcis and Wily Introscope. I have a quote for this work and would like peoples past experience of time scales for this.
I have a 3 system landscape PRD, QUA, DEV and obviously SOLMAN.
I need to set up the SMD agents on each server involved and install the required Wily components

HI,
If you have downloaded all the necessary s/w then you complete the E2E RCA setup in 1 day for one system(including buffers) including Wily.
E2E RCA config, can be completed as part of solman_setup. Once you have completed your initial and basic setup, solman is ready for managed system config.
I would recommend following timeline including buffer
two - three days for Basic configuration and initial configuration.
Installation of SMD takes less than 20 mins/ host. Wily installation also should not take more than an hour
Managed system config - this depends on which application are you configuring. in case of SAP application, you should be able to finish one SID in one day (including buffer)
BR,
Shyam

RCA error in change analysis "No config stores found "

Hi,
I have configured E2E RCA in solman.
In solman_workcenter t.code. RCA -> E2E ->select system->if i click change analysis it is showing errror "No config stores found for 'GRD 0020251123 ABAP or no changes found' '' .
but if i click trace, exeception and workload i get graph.
i checked [Work Ceters error in change analysis: "No config stores found"] , but still i get the error.
Plz help to solve the issue.
Regards,
Karthik

hi
why dont you check all the lists given by JAI in the thread
[Work Ceters error in change analysis: "No config stores found"|Work Ceters error in change analysis: "No config stores found"]
jansi

Task List for RCA

Hi Experts: I stuck into some issues while installation of the SolMan and configuring the RCA.
I like to start fresh with the installation- We are installing SolMan EHP SP 20 and Oracle- I am using the instalaltion guide in the service market place. But I am looking for step by step task list in sequence. And any lesson learnt while implementing will be help.
Can you pls provide me with Steps for Installation and Configuration of RCA functionality- which includes all the Java and ABAP stack monitoring which includes- Trace, Workload, DB Cokpit, Host Analysis etc . We plan to install the Willy and BMC Appsight.
Appreciate your help.
Regards
Bob C

Bob,
Here is my experience in config RCA.
Read all documents from [http://service.sap.com/diagnostics]
Install Solman with latest SPs available.
Finish basic post install activities as per installation guide.
Run T-Code "SOLMAN_SETUP" and go through each step.
Install Wily Introscope Enterprise Manager.
Assign proper security roles to RCA Work center
deploy Introscope Agents.
create Autoprobe
Configure E2E RCA scenerio
- Digesh

Problem with E2E Root Cause analysis in EHP1

Hi All,
I'm facing a very strange problem with using the E2E RCA functionality in EHP1. The problem is when I select the systems that I want to analyse and click on a functionality such as change analysis, I get the following error message in SAP GUI:
Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
I'm fairly sure that this is a connectivity problem because it only happens on my client machines which are behind the firewall. If I connect to solution manager without going trough the firewall I can access the application. I have checked all firewall logs and it is not blocking anything. I also did a trace using wireshark but could not find anything suspicious.
Has anybody faced this problem? Any suggestions to resolve the problem?
Cheers,
Masoud

Hi,
If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
Trace monitoring for PI is to be available from SP17 (Not yet released)
Check [this Link.|http://service.sap.com/e2e].
Hope this solves your problem.
Feel free to revert back.
--Ragu

SMD_RFC has no RFC authorization for function group SPF.

Hi,
http://pw200-3.fcc.XXXXXXX.com:50000/smd ->Diagnostics Setup ->Setup Wizard - Step 1 receives an error message like . .
The value of profile parameter login/accept_sso2_ticket could not be checked
Attached the below error message
<< >>
Sat Nov 08 12:19:07 2008 SSO The value of profile parameter login/accept_sso2_ticket could not be checked
Step SSO Details
Found SID for SSO ACL entry : PW3
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
SSO ticket certificate of PW3 was imported in ABAP PSE of localhost (client 001) : remove_certificate_failed
The ticket certificate is already in ABAP PSE, but could not be updated. You might need to check whether the certificate is up to date in STRUSTSSO2
The value of profile parameter login/accept_sso2_ticket could not be checked
!! Exception : An exception occured during the execution of this function 'PFL_GET_PROFILE_LIST'.(cause=com.sap.mw.jco.JCO$Exception User SMD_RFC has no RFC authorization for function group SPFL.)
Thanks
Thirumal
Edited by: Thiru Thirumal on Nov 8, 2008 4:33 AM
Edited by: Thiru Thirumal on Nov 10, 2008 5:49 AM

Hi All,
Check the authorizations of user SMD_RFC as described in[ this guide|https://websmp106.sap-ag.de/~sapdownload/011000358700000178012009E/RCA_User_Adminguide_SP18.pdf], refer to section 2.3.3 [SOLMAN.ABAP.RFCCOM]: Internal RFC System User.
Also check notes 1170859 and 1371222.
1170859 - SMD_RFC: running RCA without SAP_ALL profile
1371222 - Additonal authorizations for E2E RCA EhP1 SP20
I hope this help.
BR,
Allam

Can SMD be setup to monitor the Managing System?

Hello, We have been working off and on for the last few months
installing Wily Introscope, which in turn required E2E RCA, which in
turn required SMD to be installed. Since virtually all of our systems
are on a relatively low pl of the kernel, 114, we also installed the
latest SP and kernel to our Solution Manager system. So, the SM system
is at 7.00 pl 146, and SPS 16 (it's a dual-stack UNICODE system).
However, every other of our almost 27 ABAP stacks are at pl 114,
unfortunately.
We had read, via SAPNet note 1126859, that the MANAGED system must be
at least at kernel 7.00 pl 121. As I saidl, only our MANAGING SM
system is at that level. So we thought that we'd try to have SM
monitor itself, in the context of SMD and Wily Introscope.
Unfortunately, we got stuck at setting up the trusted RFCs for the SM
system to monitor itself. SAP AG's instructions for setting up the
trusted RFCs is in the following guide: Root Cause Analysis
Installation and Upgrade Guide (v3.30 - July 2008), section
6.3.2 "Setup RFC Destinations to Managed Systems". Transaction SMT1
doesn't permit 2 RFCs with the same target <sid>.
So, our questions:
1. Can a MANAGING system also be a MANAGED system?
2. If so, would you kindly clarify how to configure the RFCs for that
scenario? Or perhaps we don't use RFCs in this scenario?
For now, we will move on and try to setup Wily/SMD for a Java-stack
system we have available (Portal).

Hi Felipe Pitta,
The Managing system can be managed, for that include your Solman in a solution and proceed all the needed activities like Agent installation, Wily agent setup etc as you do for the managed systems.
You need to create RFCs to the BI client of the solman if you are the same BI component which is available in Solman (001 is your BI client) or RFCs should be created for the BI system which you are using.
WEBADMIN RFC will be created automatically during SMD Agent installation.
By this your solman's data will be collected.
For furthur clarifications pls revert back
regards
Naveen kumar

Assignment of One Solution ManagerDiagnostics Agent to Multiple SAP Systems

Dear Experts,
according to the Powerpoint presentation attached to SAP Note 1365123, one single Solution Manager Diagnostics Agent can be used for E2E RCA with multiple SAP systems running on its physical host.
I have installed one Diagnostics Agent on a server where three ABAP systems are running. Each ABAP system on this server has been installed under an alias (i.e. all these SAP systems are reachable under the same IP address. No virtual servers with individual IP addresses have been defined.). I want to configure each ABAP system for E2E RCA. When running the Managed Systems Setup procedure for E2E RCA, I am not able to assign the diagnostics agent to more than one of these ABAP systems - after the first system has been configured for E2E RCA, the entry for the Diagnostics Agent on this particular server is no longer available in the drop-down list of Diagnostics Agents when configuring the next system.
Is my understanding of the presentation mentioned above wrong, or am I missing a trick here? How can I assign the Diagnostics Agent to all three SAP systems that are running on the same physical host?
Details about the environment:
SAP Solution Manager: SAP EHP1 for Solution Manager 7.0 (SP Level 24)
Diagnostics agent version : 7.01.7.0.20100326100205
Thank you for your time,
Rainer Walter

Hello,
Have you followed all the rules?
Rule 1
Consider the diagnostic agent as a standard SAP system
Rule 2
Install one Diagnostic Agent per host (Physical or Virtual) (You mentioned you don't have virtual hosts)
Rule 3
Each Diagnostic Agent gets mapped to the SMSY repository using the server name key
Rule 4
Do not install a Diagnostic agent on a host that only run databases or SAP Central Services
Rule 5
An Agent can only conenct to one single Solution Manager System
If you install multiple Diagnostic Agents on the same host, each one needs to be connecting to a different Soltuion Manager system
Rule 6
Choose the adequate diagnostic agent installer/version
Rule 7
In a switch over scenario diagnostic agent must move with their respective virtual host and managed components
These are the rules attached to SAP Note 1365123. You need to comply to the rules.
If you have multiple agents ont he same host, then they need to conenct to different solution manager systems....according to the rules. One agent per physical host is one of the rules...specifically rule #2. This is my take, and it seems pretty clear here.
Regards,
Paul

Solution Manager systems RAM requirements - problems with the Java Engine

Hello,
I am about to install SAP Solution Manager 7 on a WIndows 2003 Server x64 but I need to know what the RAM requirements are? I have been having problems with the Java Engine starting and it seems to time out, I have heard that this is a very RAM hungry process and it might be why?
Many thanks for your help in advance,
Omar

Hello Omar,
To size SAP Solution Manager 7.0 EHP1 we recommend to use the SAP Solution Manager Quicksizer Tool at:
http://service.sap.com/sizing-solman
Here you find information on how to use the tool, how to collect input data for E2E Scenario Sizing, on SAP E2E RCA Sizing, Introscope Tuning, Wily Enterprise Manager Cluster Setup for E2E RCA Scenario and BI Aggregation Strategy in E2E Scenario.
Please find more information about installing Solution Manager in:
http://service.sap.com/instguides -> SAP Solution Manager
I hope this information helps.
Thanks,
Mark

Configuring SolMan for BPC

Good morning,
I have to configure Solution Manager to connect BPC system.
SAP suggest us to do these steps:
- Management Console - BPC tool
- Solution Manager Diagnostics u2013 install Agent on BPC
- DBA Cockpit u2013 connect BPC Data Base server
Could you please suggest to me any link where I can find documentation or wiki page?
Many Thanks.

Hello Alessandro,
You can find some documentation here at this link [E2E RCA System Landscape Setup Guide|https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000074392009E] See section 4.46.
Hope this information helps.
Regards,
Paul

E2E RCA config

Similar Messages

Maybe you are looking for