E3000 cannot connect to wireless IP Camera

I am trying to connect 2 wireless IP cameras to my network with a Cisco E3000 router. One is a DLink DCS-920 and the other is Foscam FI8918W. I set up both cameras over ethernet and enter the router stettings. When I disconnect the eternet I do not get wireless connectivity. When I run Cisco Connect software / Computers and Other Devices / Other Wireless Devices, it does not find the cameras.
How do I connect to the cameras?
Thanks

After fiddling with various settings, I now can connect to the webcams locally through my browser. I cannot get the DLink DCS-920 to upload via FTP. The Foscam is not listed in the router's DHCP Client list, but I can see it in my browser.
Any thoughts?
My DLink webcam worked fine with a Netgear router.

Similar Messages

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot use the software.. so you need to figure out where the problem is..
But let me suggest.. the Mac is not the issue and likely the info from Sony is also up the creek.. they make PC's after all.
It is far more likely the camera is having issues with the wireless network.
Do you know you have a connection to the home network on the camera.. ?? You have an IP address and some internet or local access at least?
How you will discover those things is by fiddling.. but if you can tell me what wireless AP you are using that will help.

Questions: cannot connect via wireless laptop (router WR...

Questions:
cannot connect via wireless laptop (router WRK54G)
cannot secure my network using WEP

from the wired computer , access the router using http://192.168.1.1 . the default password is admin
on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

I have done the step 1 to 3,but still cannot connect the wireless network?

i have done the step 1 to 3,but still cannot connect the wireless network?

Step 1 to 3 of what? Can you elaborate on the issue?

Laserjet pro 100 cannot connect to wireless

Hi There,
I cannot connect my printer HP laserjet 100 color mfp m175nw to the wireless. It is connect to the router and it install on the computer with the Usb cable but not with the wireless connection.
How can I fix this?
Before it used to work perfect I could even print from my phone, now unless I connect my computer to the printer with cable it will not work because I cannot install the printer working with the wireless connection.
Please help
This question was solved.
View Solution.

Thanks for letting us know, glad you got it fixed
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hp officejet pro 8610 | does not print and cannot connect it wireless

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Cannot connect to wireless network from a new HP Officejet Pro 6830

Just purchased a HP Officejet Pro 6830 wireless printer.
Set it up connecting my Dell PC and it initially worked.
THEN something happened.
ICON on screen on printer indicates "NO WIRELESS NETWORK FOUND"
Tried rebooting the Cable modem, then the router, then the printer and then the PC.
Still did not work.
What should I do?
Thank you for any help.

Hi @I-Love-HP-Gear,
Welcome to the HP Forums!
I noticed that you cannot connect to the wireless network from a new HP Officejet pro 6830, I am sorry to hear this, but I am happy to help you with your connection issues!
Are you able to make copies with the printer? Copy Text or Mixed Documents.
What Operating System are you using? Windows or Mac? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, please see the following:
This general printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue.
This wireless guide for maintaining the connection. Printer Does Not Maintain Wireless Connection.
The HP Wireless Printing Center for more information. HP Wireless Printing Center.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

[SOLVED]cannot connect to wireless network due to a channel setting

Hello guys, I recently came across a problem with my wireless network.
It was first a system-wide upgrade(adapted from the pacman's log):
[2010-08-22 15:10] Running 'pacman -Syu'
[2010-08-22 15:10] synchronizing package lists
[2010-08-22 15:10] starting full system upgrade
[2010-08-22 16:14] upgraded avahi (0.6.25-3 -> 0.6.27-2)
[2010-08-22 16:14] upgraded nspr (4.8.4-1 -> 4.8.6-1)
[2010-08-22 16:14] upgraded nss (3.12.6-3 -> 3.12.7-1)
[2010-08-22 16:14] upgraded chromium (5.0.375.125-1 -> 5.0.375.127-1)
[2010-08-22 16:14] upgraded curl (7.21.0-1 -> 7.21.1-1)
[2010-08-22 16:14] upgraded freetype2 (2.4.1-1 -> 2.4.2-1)
[2010-08-22 16:14] upgraded gnome-keyring (2.30.3-1 -> 2.30.3-2)
[2010-08-22 16:14] upgraded gstreamer0.10 (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded orc (0.4.6-1 -> 0.4.7-1)
[2010-08-22 16:14] upgraded udev (160-1 -> 161-1)
[2010-08-22 16:14] upgraded gstreamer0.10-base (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded gstreamer0.10-base-plugins (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded k3b (2.0.0-2 -> 2.0.1-2)
[2010-08-22 16:14] upgraded linux-firmware (20100623-2 -> 20100807-1)
[2010-08-22 16:14] >>> Updating module dependencies. Please wait ...
[2010-08-22 16:14] >>> MKINITCPIO SETUP
[2010-08-22 16:14] >>> ----------------
[2010-08-22 16:14] >>> If you use LVM2, Encrypted root or software RAID,
[2010-08-22 16:14] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-08-22 16:14] >>> More information about mkinitcpio setup can be found here:
[2010-08-22 16:14] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-08-22 16:14]
[2010-08-22 16:14] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-08-22 16:14] ==> Building image "default"
[2010-08-22 16:14] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-08-22 16:14] :: Begin build
[2010-08-22 16:14] :: Parsing hook [base]
[2010-08-22 16:14] :: Parsing hook [udev]
[2010-08-22 16:14] :: Parsing hook [autodetect]
[2010-08-22 16:14] :: Parsing hook [pata]
[2010-08-22 16:14] :: Parsing hook [scsi]
[2010-08-22 16:14] :: Parsing hook [sata]
[2010-08-22 16:14] :: Parsing hook [usbinput]
[2010-08-22 16:14] :: Parsing hook [keymap]
[2010-08-22 16:15] :: Parsing hook [encrypt]
[2010-08-22 16:15] :: Parsing hook [lvm2]
[2010-08-22 16:15] :: Parsing hook [filesystems]
[2010-08-22 16:15] :: Generating module dependencies
[2010-08-22 16:15] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-08-22 16:15] ==> SUCCESS
[2010-08-22 16:15] ==> Building image "fallback"
[2010-08-22 16:15] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-08-22 16:15] :: Begin build
[2010-08-22 16:15] :: Parsing hook [base]
[2010-08-22 16:15] :: Parsing hook [udev]
[2010-08-22 16:15] :: Parsing hook [pata]
[2010-08-22 16:15] :: Parsing hook [scsi]
[2010-08-22 16:15] :: Parsing hook [sata]
[2010-08-22 16:15] :: Parsing hook [usbinput]
[2010-08-22 16:15] :: Parsing hook [keymap]
[2010-08-22 16:15] :: Parsing hook [encrypt]
[2010-08-22 16:15] :: Parsing hook [lvm2]
[2010-08-22 16:15] :: Parsing hook [filesystems]
[2010-08-22 16:16] :: Generating module dependencies
[2010-08-22 16:16] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-08-22 16:16] ==> SUCCESS
[2010-08-22 16:16] upgraded kernel26 (2.6.34.3-1 -> 2.6.35.2-1)
[2010-08-22 16:16] upgraded kernel26-headers (2.6.34.3-1 -> 2.6.35.2-1)
[2010-08-22 16:16] upgraded libdatrie (0.2.3-1 -> 0.2.4-1)
[2010-08-22 16:16] upgraded libgnome-keyring (2.30.1-1 -> 2.30.1-2)
[2010-08-22 16:16] upgraded libpciaccess (0.11.0-1 -> 0.12.0-1)
[2010-08-22 16:16] upgraded libxvmc (1.0.5-1 -> 1.0.6-1)
[2010-08-22 16:16] upgraded mdadm (3.1.2-2 -> 3.1.3-1)
[2010-08-22 16:16] upgraded pixman (0.18.2-1 -> 0.18.4-1)
[2010-08-22 16:16] upgraded poppler-data (0.4.2-1 -> 0.4.3-1)
[2010-08-22 16:16] upgraded powertop (1.11-2 -> 1.13-2)
[2010-08-22 16:16] upgraded pycairo (1.8.8-1 -> 1.8.10-1)
[2010-08-22 16:16] upgraded pygtk (2.17.0-1 -> 2.17.0-2)
[2010-08-22 16:16] upgraded qimageblitz (0.0.5-1 -> 0.0.6-1)
[2010-08-22 16:16] upgraded usbutils (0.87-1 -> 0.90-1)
[2010-08-22 16:16] upgraded vlc (1.1.2-2 -> 1.1.3-1)
[2010-08-22 16:16] upgraded xextproto (7.1.1-1 -> 7.1.2-1)
[2010-08-22 16:16] upgraded xf86-input-evdev (2.4.0-1 -> 2.4.0-2)
[2010-08-22 16:16] upgraded xproto (7.0.17-1 -> 7.0.18-1)
Then after a reboot, I wouldn't be able to connect to wireless network anymore.
I tried "netcfg Wireless_Archer(my wireless profile's name)" as usual, it replied:
[root@mzws log]# netcfg Wireless_Archer
:: Wireless_Archer up [BUSY]
> WPA Authentication/Association Failed
[FAIL]
Next I tried to bing the network up manually. I followed the "Wireless Setup" and "WPA supplicant" wiki, then I get a timed out problem:
[root@mzws ~]# ifconfig wlan0 up
[root@mzws ~]# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: D8:5D:4C:59:52:EC
Channel:13
Frequency:2.472 GHz (Channel 13)
Quality=66/70 Signal level=-44 dBm
Encryption key:on
ESSID:"Archer"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s
Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000000000bf666fe
Extra: Last beacon: 70ms ago
IE: Unknown: 0006417263686572
IE: Unknown: 010882848B960C183048
IE: Unknown: 03010D
IE: Unknown: 2A0100
IE: Unknown: 32041224606C
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: Unknown: DD0900037F01010008FF7F
IE: Unknown: DD1A00037F0301000000D85D4C5952ECDA5D4C5952EC64002C010808
Cell 02 - Address: 00:22:B0:8C:76:D7
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=22/70 Signal level=-88 dBm
Encryption key:on
ESSID:"szpatrick"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Unknown/bug
Extra:tsf=000000e93e5b9174
Extra: Last beacon: 1340ms ago
IE: Unknown: 0009737A7061747269636B
IE: Unknown: 010882848B961224486C
IE: Unknown: 030101
IE: Unknown: 32040C183060
IE: Unknown: 0706474220010D10
IE: Unknown: 33082001020304050607
IE: Unknown: 33082105060708090A0B
IE: Unknown: DD050050F20500
IE: Unknown: DD0E0050F204104A0001101044000102
IE: Unknown: 050400010000
IE: Unknown: 2A0100
IE: Unknown: 2D1A6E1013FFFF0000010000000000000000000000000C0000000000
IE: Unknown: 3D1601050100000000000000000000000000000000000000
IE: Unknown: 7F0101
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: DD1E00904C336E1013FFFF0000010000000000000000000000000C0000000000
IE: Unknown: DD1A00904C3401050100000000000000000000000000000000000000
IE: Unknown: DD07000C4304000000
Cell 03 - Address: 00:25:68:EB:3F:FC
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=26/70 Signal level=-84 dBm
Encryption key:on
ESSID:"vodafone3FFB"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000002f6c23184
Extra: Last beacon: 570ms ago
IE: Unknown: 000C766F6461666F6E6533464642
IE: Unknown: 010882848B960C121824
IE: Unknown: 03010B
IE: Unknown: 050400010000
IE: Unknown: 200100
IE: Unknown: 2A0104
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: 32043048606C
IE: Unknown: DD180050F2020101020003A4000027A4000042435E0062322F00
IE: Unknown: DD1E00904C334E101BFFFF000000000000000000000000000000000000000000
IE: Unknown: 2D1A4E101BFFFF000000000000000000000000000000000000000000
IE: Unknown: DD1A00904C340B071B00000000000000000000000000000000000000
IE: Unknown: 3D160B071B00000000000000000000000000000000000000
IE: Unknown: DD0900037F01010000FF7F
IE: Unknown: DD0A00037F04010020000000
IE: Unknown: 0706494520010D14
[root@mzws ~]# wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
[root@mzws ~]# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"Archer"
Mode:Managed Frequency:2.472 GHz Access Point: D8:5D:4C:59:52:EC
Bit Rate=1 Mb/s Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@mzws ~]# sleep 10s;dhcpcd wlan0
dhcpcd[4076]: version 5.2.7 starting
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: broadcasting for a lease
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: broadcasting for a lease
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: timed out
I tried the "iwconfig wlan0 channel auto", but that didn't work. Here's the output of "lspci | grep -i net":
[root@mzws ~]# lspci | grep -i net
00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03)
03:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
So what's the problem here? I searched the forum and google, and it seemed that I connected to a wrong router(for sometimes I only one "carrier lost" then "timed out"), but how was that happened? Things worked quite well before the upgrading as well as in my Windows environment.
Any reply would be appreciated! Thanks in advance!
Last edited by karbon (2010-08-23 06:40:10)

Thanks Proofrific, but I believe it's not, for the DHCP server is a built-in module in my wireless router.
I am now able to connect to my wireless network now. And it seems to be a little kernel bug as I discovered a thread(sorry but I forgot which one) in the forum discussing a similar problem.... Somebody in that post suggested a work-around to change the channel, as their default setting is channel 13 or 12.
I tried and it did work! Just simply open your router's setting page and then change the channel from auto to 3(in my case), and netcfg worked well now. For the manual configuration, I suppose the "iwconfig wlan0 channel 3" should be issued.
Thanks everyone in the forum for providing their solutions!

Connecting a wireless nanny cam to iMac - no RCA connection

I have just migrated from the PC to Mac world. I have a wireless nanny cam that I use to record to my PC (like a DVR) by installing in my PC a DVR/PCI card that has RCA input jacks. A receiver would connect into the RCA jacks and thus receive the wireless camera signal. I now use an iMac
Obviously I can't install a PCI card on my iMac and it doesn't have RCA inputs either, so how would I receive a signal on my iMac from a wireless camera? It is not a camera that has its own IP address. I thought that since the latest iMacs are able to pick up wireless router signals for internet connectivity, that it could also be configured for a wireless camera that transmits a signal. Do I have any hope? FYI, the software used to manage the camera recordings is called Pico 2000.

You can use El Gato's EyeTV 250.
It has RCA input so you can hook up your Nanny Cam receiver and record to your HD.
Plus,you can connect your cable TV and watch and record shows on the iMac.
http://www.elgato.com/index.php?file=products_eyetv250&PHPSESSID=11d96ee451639d4 dd7739ef8b971a5ea
Jim
P.S. Welcome to the Discussions.
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.8)

Windows Client cannot connect to wireless LAN through EAP-TLS

I have a Cisco Aironet Access point which cannot be authenticated by a remote RADIUS server to connect to wireless lan through EAP-TLS. These is the debug output from the AAA process.
*Mar 7 10:56:56.337: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:56:56.369: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.385: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.385: dot11_auth_parse_client_pak: id is not matching req-id:1re
sp-id:2, waiting for response
*Mar 7 10:56:56.401: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.717: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:56.717: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:56.785: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.097: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.097: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.101: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.393: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.393: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.397: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.673: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.673: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.677: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.953: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.953: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.957: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.317: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.317: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:58.321: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.685: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.685: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:58.685: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.993: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.993: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:59.041: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:57:01.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:57:08.997: %RADIUS-4-RADIUS_DEAD: RADIUS server 165.72.12.12:1812,181
3 is not responding.
*Mar 7 10:57:08.997: %RADIUS-4-RADIUS_ALIVE: RADIUS server 165.72.12.12:1812,18
13 is being marked alive.
*Mar 7 10:57:14.481: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:57:14.521: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:57:44.521: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:57:44.801: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:57:44.829: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:58:14.829: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:58:15.105: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:58:15.141: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:58:45.141: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:58:45.425: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:58:45.449: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:15.449: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:59:15.729: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:15.753: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:45.753: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:59:46.009: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:46.037: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:50.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:59:50.349: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:50.373: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:55.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:59:55.341: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:55.361: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:00.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 11:00:00.333: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 11:00:00.357: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:05.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 11:00:05.341: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 11:00:05.365: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:10.077: Client 0811.9650.8cb0 failed: reached maximum retries

Kindly get verified the configuration and the compatibility if there is a mismatch. Please find the link below for more information on EAP-TLS functions in Access points and clients.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a008009256b.shtml#wp39110

I took my laptop on vacation and it says the computer cannot find the time capsule cannot connection; the wireless still works. How do I get it to reconnect

I had my MacBook Pro running Mt Lion OS X 10.8.3 disconnected from my Time Capsule, gen4 for a month. Upon returning, I get the message that my computer cannot connect to the Time Capsule for backup. It does however, pick up the wireless internet. How do I reconnect for backup?

Just pretend you are setting it up for the first time, and follow the directions here:
http://support.apple.com/kb/HT1178

I cannot connect to wireless from Ipad when I could 2 days ago. Still can connect to same wireless from other PC. What settings do I need to check?

I recently cannot connect to my neighbors wireless with my Ipad. I can connect with my PC. I feel like I have shanged a setting by accident but do not know where to start to correct this. I have the password to the account.

Are you receiving the signal? Do you see the white "fan" WiFi indicator in the upper left corner of the iPad screen?
Go to Settings>WiFi> and see if the network name is showing on the iPad. If the name is showing, you can try this ...
Tap on the network name, then tap on the blue arrow next to the network name and then tap Forget this Network. Restart your iPad then go to the settings again, tap WiFi - tap on the network name - enter the password and see if you can connect again.
Normally I would suggest unplugging the router for about 30 seconds and then plug it in again, but this is your neighbor's WiFi? Does he know you are using his WiFi access? If so, what a great guy!
Here is how to restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

IMac 27": Windows 7 cannot connect to wireless internet

I just installed Windows 7 on my iMac (new model 2011) on another partition, so I now have both OS X and Windows 7, and I cannot connect to my Wireless Network in Windows 7, but I can in OS X.
I've tried basically everything and looked in millions of threads to find a sollution - but I can't. I'm using my laptop now (Windows XP) and it's connecting fine.
I've tried:
- Resetting the router
- Changing the security type from WPA2/TKIP to none
- Updating the driver (In Windows it says it's and Atheros AR938x Wireless Lan Card)
- Update all Windows
What can I do?
Gear:
Router: Netgear CG 2000
iMac 27 (New model 2011 or what it's called. It a year old)
I've read several times that Windows 7 has problems with connection, but the threads are like 2 years old, so someone must have come up with a sollution?
Christian

I've done that.
I've installed Windows 7 with Bootcamp and everything is installed correctly if I look in "Device Manager". There are no problems - except that I cannot join the wireless network.
If I plug a cable in it works fine.

Windows XP cannot connect to wireless HP6980

I replaced my hard drive and can connect wirelessly to the internet but my computer cannot connect to my printer. I followed instructions to enter the IP address in the browser and found my printer but could not configure it. Now when I put in the IP address it does not recognize the address. I disabled windows firewall but this did not help. I have the WEP Key and the system sees the gateway and mask but still can't find the printer.

Did you install the HP software from here?
Do not use WEP, it is not secure (can be broken in about 10 minutes with freeware) and can also cause connection problems. Change to WPA or WPA2 with a passphrase you create - use 13+characters, numbers and letters, upper and lower case.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Two Issues: Cannot connect to wireless networks; Cannot load certain sites

Hey everybody,
I have a MacBook Pro 15".
In just the past week, I've stumbled upon two sudden problems with my network/internet connectivity.
First, I can no longer connect to wireless networks, be it an infrastructure point or computer-to-computer ad-hoc networks. I'm not really sure why. I installed the latest AirPort Update (4.2.3, according to System Profiler). I also recently installed both iStumbler and KisMac v.21. When I started having issues, I thought that maybe one of these two programs might be the culprit, so I uninstalled both of them but I still have the same problem.
Second, I've had issues with not being able to connect to certain websites. I use both Safari and BonEcho as my browsers. The specific sites seem random:
www.weffriddles.com
www.macrumors.com
images.google.com
sports.yahoo.com
finance.yahoo.com
to list a few.
If you need any diagnostic information, please let me know.
Thanks in advance for any advice/help you can provide!
Tommy H.
MacBook Pro Mac OS X (10.4.9) browsers: Safari, BonEcho/ Airport Driver Version: 4.2.3

If you are trying to connect to a third-party router using WPA or WEP, there is a good chance that your Airport card was broken by Apple's 2007-02 Airport Update. There is no fix, and for many of us, our Macbooks and Macbook Pros are useless for wireless connections until Apple fixes the issue. At this point, Apple seems to be denying that there even is an issue, so we may all be in for a long wait indeed.
See this thread if you have some time:
http://discussions.apple.com/thread.jspa?threadID=883021&tstart=0

E3000 cannot connect to wireless IP Camera

Similar Messages

Maybe you are looking for