E3000 connection not working today.

Hello, there was a thunder storm today, and it caused a blackout for about 5 seconds and the power went back on. Now there is a problem, my main computer can connect to the internet, but my other computer and xbox 360 cannot not. All connections are wired. I tried restarting the modem/router but didn't help. Along with that, my main computer, when ever its on, on the router, the port light was always green, now its always blue..? All the other ports have no light but the computer/xbox are on connected to it. I have no idea what to do?
Also, looking at the Cisco software, it says there are 5 devices connect? there is only 1, and no one else is using it because its password protected?

Press the reset button on the router for 30 seconds.
The Power light will start flashing.
Turn the Router and the Modem OFF.
Turn the modem ON first, wait for 10 seconds, turn the router ON, wait for 10 seconds, you should be online.
Now check the firmware on the router and cross check for the latest firmware on the linksys website. Ensure you check the correct model and the version number.
If there is any firmware update for your router, its recommended that you upgrade the firmware on the router.
Follow this link to upgrade the firmware on the router.
How to upgrade firmware on Valet or Linksys Eseries.
C | EH
linksyshelp.blogspot.com

Similar Messages

Photo Stream not working today!

Photo Stream not working today!
I turn off all devices (iPhone, iPad, iMac), i reset iCloud.com -> Photo Stream, but not working.
Is Photo Stream service down? (all other services in iCloud is working)

Hi..
Try deselecting the box next to: Automatic Import
in iPhone > Preferences > Photo Stream
Then try deselecting Photo Stream in System Preferences > iClould then reselect to reset.
iCloud: Photo Stream FAQ

Camera connection not working with my camera

Camera connect not working with my Sony boggie camera

The Bloggie will not work because it draws too much power from the USB port on the iPad. The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory. Works fine with my 3D Bloggie.

Update/upload not working today

hello
update/upload not working today
everytime i go on the ipad and try (or resume) it says theres' an error and that i gotta try later, but it's 7 hours now that i try later ...
anyone else experiencing this today ?

same problem here... cant update to server at this time.
It has worked briefly today but mainly I get this message each time I try. Had the same problem yesterday!

Something working yesterday, not working today.

Hi guys,
Yesterday, this piece of config/code was working.
I am passing material number from main WF to sub WF.
somehow, today it is not working again.
any guesses or do we need to refresh anything ????
Regrds.
santosh.

SWU3 is configured properly.
Except for 1)Maintain web server & 2) check entries from HR Control tables , everything is set to green.
Actually, main WF is successfully trigerring the sub WF.
But, somehow MATNR is not being passed to sub WF, which was being passed yesterday.
same containers, same binding.
But, not working today.
Any guesses.....
rgrds.
santosh.

X-Fi Titanium PCI Express front pannel connection not working

<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM

Iphone 6 plus wifi connection not working

I don't know what the deal is but, I'm getting notifications of emails, and messages but when I go to the app I have nothing there. The problem has expanded and now apps aren't connecting to any wifi. I thought it might have been 3rd party apps, but now even the app store cannot connect. I've tried my home wifi, and my work wifi. Using my data plan, I have no problems connecting to anything. I'm thinking this is an IOS8 issue that needs a patch. If somebody has any other suggestions, I'm all ears!

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Remote Desktop Connection not working

I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.

thebluemamba_24 wrote:
Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
If you read my previous post it said:
"I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work?

Push email not working today, was working yesterday

Updated to 2.0 yesterday, push email was working - i'd get mail pretty much instantly. Today it's not working, i'm having to fetch my mail. I'm using a .mac address. Any ideas?
iPhone 2G with 2.0 on O2 (UK).

cybersoga wrote:
I think it's using SMS to push emails to the phone, and it doesn't tell the email software to send/receive it only displays the part of the email that was in the SMS. At least you can manually send/receive to catch up.
Yes, I think you're correct with that. That seems to be the way all the "cloud" stuff that Apple will let developers push to the phone is going to work. Like a chat client, for instance. No persistent connection to look for incoming messages, instead the IM routes to Apple's server, which sends a message to the phone chat client that there's new data and to come look for it.
Good for battery life.
Re: the delete on the Mac not showing on the phone, shouldn't the mail client do a sync via imap every time you even open it? That's the way it was working before 2.0. I haven't had time to play with it yet to confirm.

E3000: uPnP not working with Xbox 360

Hello all,
So I just setup my new E3000, upgrading from a WRT54G. The uPnP worked great on that router and my last three routers before that. Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.
However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP. Xbox connectivity test comes back and says that my NAT type is "Moderate". Most stuff works fine, but I'd like to get it all working. I worked with a Linksys tech who was very helpful and got NAT to "Open" by configuring triggered port forwarding.
I am happy to have my issue resolved, but confused why uPnP didn't work? I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
Is there some other configuration change I made that may have upset the uPnP?
Thanks!
-Scott
Solved!
Go to Solution.

In case this helps anyone else:
For the past few months, I have been using static mapping for XBOX live. I recently updated the firmware on my router to 1.04 and still was having similar problems with uPnP. So I continued to use static mappings. One day my IP for the Xbox changed and I got frustrated.
I tried one thing before giving up on this router:
1) Held down the reset button for 30 seconds
2) While still holding it down, unplugged the router for 30 seconds
3) While still holding it down, plugged back in and continued holding for 30 seconds
This does a complete reset of the router. I then re-ran the Cisco connect software (which was also updated recently). I reconfigured my router the way I wanted.
Now, Xbox Live uPnP is working!

WordPress in Gallery not working today

I have used the Wordpress gallery item previously and it worked great. Today, I need to create a new WordPress site and the Gallery is not working. The site comes up blank. I never get to the setup screen.
Please let us know when the gallery is fixed.
thanks, Amy

Hello Amy Babinchak
1.Are you able to create an empty site?
2.Are you able to create a gallery site using a different template? e.g. try an "ASP.NET Empty Site".
I have just tried to create the Wordpress Webapp from the Classic Portal and find that I am able to create the it (does not load blank to me), we can be sure that there aren't any issues currently with creating webapp using these templates.
You can also try to create the Webapp from the New portal and let us know the result:
1. Connect to the new portal (https://portal.azure.com) with the Subscription ID where you created the web site originally.
2. Create a Webapp with the exact name that you are trying to create.
Please let me know the results when you try this.
Thanks,
Syed Irfan Hussain

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Corporate connectivity not working for some users

Hi,
I'm having an issue that started about a month ago but is getting worse. A select group of users are no longer able to connect using DirectAccess, even though these users have been using their computers for a few months without issue.
BACKGROUND:
-Windows 2008 R2 DirectAccess server
-Windows 7 x64 enterprise clients
-Most clients experiencing the issue have a newer laptop (Lenovo T440 with Intel 7260AC wireless), but the issue is not limited to this model. Also, I have 25+ other Lenovo T440 units that connect without issue to this day.
TROUBLESHOOTING STEPS:
I have tried disabling the various interfaces used for directaccess on these problem machines and have not been able to narrow it down. Essentially- I've noticed the IP-HTTPS interface shows deactivated, so I'll disable Teredo. This
usually allows the IP-HTTPS to show activated, and connectivity is restored. However, after 30 seconds to a few minutes, connectivity will once again drop. So I'll re-enable teredo (default,client, or enterprise client) and connectivity will kick
on for another brief period, but drops again shortly after.
I have confirmed that during these short periods of connectivity working, the wf.msc shows connectivity using NTLM and Kerberos, but the clients just can't seem to stay connected on any interface.
However, in the wf.msc when the clients are not functioning, I only ever see one NTLM entry.

LOGS:
Below is a directaccess client log pulled from a non-functioning client before making any changes or any testing. Feel free to ask for the rest of the log if needed-- I have put in place holders for information that may be sensitive. Thank you!!
RED: Corporate connectivity is not working.
Windows is unable to relocationve corporate network names. Please contact your administrator if this problem persists.
24/3/2015 18:21:43 (UTC)
Probes List
FAIL PING: location-dc.domain.local
FAIL PING: location-file.domain.local
DTE List
PASS PING: 2002:'mac':5a1c::'mac':5a1c
PASS PING: 2002:'mac':5a1d::'mac':5a1d
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : c2075
Primary Dns Suffix . . . . . . . : domain.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.local
domain2.ad
System Quarantine State . . . . . : Not Restricted
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2
Physical Address. . . . . . . . . : 2A-B2-BD-'mac2'-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 2A-B2-BD-'mac2'-E6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 28-B2-BD-'mac2'-E9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : attlocal.net
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 7260
Physical Address. . . . . . . . . : 28-B2-BD-'mac2'-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2602:304:'mac3':d370:5a1:c77:834:86a9(Preferred)
Temporary IPv6 Address. . . . . . : 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'(Preferred)
Link-local IPv6 Address . . . . . : fe80::5a1:c77:834:86a9%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.86(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, March 24, 2015 1:48:21 PM
Lease Expires . . . . . . . . . . : Wednesday, March 25, 2015 1:48:21 PM
Default Gateway . . . . . . . . . : fe80::21b:5bff:febf:4f21%12
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : domain.local
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I218-LM
Physical Address. . . . . . . . . : 28-D2-44-C5-24-59
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.attlocal.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : attlocal.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : iphttpsinterface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FD31098B-E475-49A1-9AFA-8C43FF928F97}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.domain.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:'mac':5a1c:342d:25dd:b4e1:12c8(Preferred)
Link-local IPv6 Address . . . . . : fe80::342d:25dd:b4e1:12c8%18(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{E1BE09BA-B38B-4F87-8893-E3D32A88EDFC}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0C04B587-7861-4D8D-9DA9-6326AB71D701}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int teredo show state
Teredo Parameters
Type : client
Server Name : 204.16.90.28 (Group Policy)
Client Refresh Interval : 30 seconds
Client Port : unspecified
State : qualified
Client Type : teredo host-specific relay
Network : unmanaged
NAT : restricted
NAT Special Behaviour : UPNP: No, PortPreserving: Yes
Local Mapping : 192.168.1.86:55842
External NAT Mapping : 75.30.237.55:55842
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int httpstunnel show interfaces
Interface IPHTTPSInterface (Group Policy) Parameters
Role : client
URL : https://uag.webdomain.com:443/IPHTTPS
Last Error Code : 0x0
Interface Status : IPHTTPS interface deactivated
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh dns show state
Name Relocationution Policy Table Options
Query Failure Behavior : Always fall back to LLMNR and NetBIOS
if the name does not exist in DNS or
if the DNS servers are unreachable
when on a private network
Query Relocationution Behavior : Relocationve only IPv6 addresses for names
Network Location Behavior : Let Network ID determine when Direct
Access settings are to be used
Machine Location : Outside corporate network
Direct Access Settings : Configured and Enabled
DNSSEC Settings : Not Configured
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh name show policy
DNS Name Relocationution Policy Table Settings
(ENTRIES OMITTED TO SAVE SPACE)
Settings for .domain.local
Certification authority : DC=local, DC=domain, CN=HDT CA
DNSSEC (Validation) : disabled
DNSSEC (IPsec) : disabled
DirectAccess (DNS Servers) : 2002:'mac':5a1d::'mac':5a1d
DirectAccess (IPsec) : disabled
DirectAccess (Proxy Settings) : Bypass proxy
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh name show effective
DNS Effective Name Relocationution Policy Table Settings
(ENTRIES OMITTED TO SAVE SPACE)
Settings for .domain.local
Certification authority : DC=local, DC=domain, CN=HDT CA
DNSSEC (Validation) : disabled
IPsec settings : disabled
DirectAccess (DNS Servers) : 2002:'mac':5a1d::'mac':5a1d
DirectAccess (Proxy Settings) : Bypass proxy
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int ipv6 show int level=verbose
Interface Loopback Pseudo-Interface 1 Parameters
IfLuid : loopback_0
IfIndex : 1
State : connected
Metric : 50
Link MTU : 4294967295 bytes
Reachable Time : 40000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : disabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection Parameters
IfLuid : wireless_0
IfIndex : 12
State : connected
Metric : 25
Link MTU : 1472 bytes
Reachable Time : 1101000 ms
Base Reachable Time : 1805000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 64
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.attlocal.net Parameters
IfLuid : tunnel_4
IfIndex : 22
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 27500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection 2 Parameters
IfLuid : wireless_5
IfIndex : 15
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 24000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface iphttpsinterface Parameters
IfLuid : tunnel_5
IfIndex : 17
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 31500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : enabled
Other Stateful Configuration : enabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Local Area Connection Parameters
IfLuid : ethernet_6
IfIndex : 11
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 31500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface 6TO4 Adapter Parameters
IfLuid : tunnel_6
IfIndex : 19
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 39500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : disabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{FD31098B-E475-49A1-9AFA-8C43FF928F97} Parameters
IfLuid : tunnel_7
IfIndex : 21
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 33000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.domain.local Parameters
IfLuid : tunnel_8
IfIndex : 39
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 36000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Bluetooth Network Connection Parameters
IfLuid : ethernet_9
IfIndex : 14
State : disconnected
Metric : 50
Link MTU : 1500 bytes
Reachable Time : 17000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection 3 Parameters
IfLuid : wireless_9
IfIndex : 16
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 17000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Teredo Tunneling Pseudo-Interface Parameters
IfLuid : tunnel_9
IfIndex : 18
State : connected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 14500 ms
Base Reachable Time : 15000 ms
Retransmission Interval : 2000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : enabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{E1BE09BA-B38B-4F87-8893-E3D32A88EDFC} Parameters
IfLuid : tunnel_10
IfIndex : 20
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 41000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{0C04B587-7861-4D8D-9DA9-6326AB71D701} Parameters
IfLuid : tunnel_11
IfIndex : 23
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 40000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh advf show currentprofile
Private Profile Settings:
State ON
Firewall Policy BlockInbound,AllowOutbound
LocalFirewallRules N/A (GPO-store only)
LocalConSecRules N/A (GPO-store only)
InboundUserNotification Enable
RemoteManagement Disable
UnicastResponseToMulticast Enable
Logging:
LogAllowedConnections Disable
LogDroppedConnections Disable
FileName %systemroot%\system32\LogFiles\Firewall\pfirewall.log
MaxFileSize 4096
Ok.
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh advfirewall monitor show consec
Global Settings:
IPsec:
StrongCRLCheck 0:Disabled
SAIdleTimeMin 5min
DefaultExemptions ICMP
IPsecThroughNAT Never
AuthzUserGrp None
AuthzComputerGrp None
StatefulFTP Enable
StatefulPPTP Enable
Main Mode:
KeyLifetime 60min,0sess
SecMethods DHGroup2-AES128-SHA256,DHGroup2-AES128-SHA1,DHGroup2-3DES-SHA1
ForceDH No
Categories:
BootTimeRuleCategory Windows Firewall
FirewallRuleCategory Windows Firewall
StealthRuleCategory Windows Firewall
ConSecRuleRuleCategory Windows Firewall
Quick Mode:
QuickModeSecMethods ESP:SHA1-None+60min+100000kb,ESP:SHA1-AES128+60min+100000kb,ESP:SHA1-3DES+60min+100000kb,AH:SHA1+60min+100000kb
QuickModePFS None
Security Associations:
Main Mode SA at 03/24/2015 14:21:44
Local IP Address: 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'
Remote IP Address: 2002:'mac':5a1d::'mac':5a1d
Auth1: ComputerCert
Auth2: UserNTLM
MM Offer: None-AES128-SHA256
Cookie Pair: 9398e38420480425:51071d5bae9eb503
Health Cert: No
Quick Mode SA at 03/24/2015 14:21:44
Local IP Address: 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'
Remote IP Address: 2002:'mac':5a1d::'mac':5a1d
Local Port: Any
Remote Port: Any
Protocol: Any
Direction: Both
QM Offer: ESP:SHA1-AES192+60min+100000kb
PFS: None
Thanks again,

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

E3000 connection not working today.

Similar Messages

Maybe you are looking for