E3000 needs to be restarted regularly, sometimes resets to factory default

My E3000 needs to be restarted at least once a week. Pings to the router will slowly lag over time and reach 700+ after several days from my wired desktop. Sometimes during the restart the router will also reset to factory default settings.
So far I've installed the 1.0.02 (build 4) firmware and done the restart while holding the button. The new firmware has greatly improved my wireless performance but I have no idea what to do next.

Follow the below mentioned settings and then check.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter. Leave Username blank & in Password use admin in lower case. Click on the Wireless tab > Click on Advanced Wireless Settings Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings.

Similar Messages

  • TS4006 I need to erase my ipad and reset to factory settings in order to sell it but it won't do it

    I need to erase my ipad and reset to factory settings in order to sell it but it won't allow me to do it and it keeps coming up with a passcode that it won't take either how do I get around this ?

    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to reset the factory defaults for Adobe Photoshop CS4? [was:need assistance]

    How to reset the factory defaults for Adobe Photoshop, CS4.  My 'image size' box is not quite right. Thank you.

    How to delete/reset Photoshop preferences
    Preference file functions, names, locations | Photoshop CS4
    To reset within the Image Size dialog press Alt (Option on Mac) and click Reset.

  • RVS4000 resets to factory defaults

    I just installed a new RVS4000 router (firmware V1.3.0.5), configured it to my LAN, saved the setting and created a configuration backup. 4 times now in less than a week I lost access to the internet only to find the router reset to factory defaults.
    I can restore from the backup, but a day or 2 later and it resets again.
    Any suggestions - or do you think it's a hardware problem and I should return it for replacement?

    Please give this a try. First you need to upgrade to the latest firmware version(1.3.2.0). After upgrading to the latest version of the software the next step is to reset the device back to factory defaults. Then after the reset to factory, load the device manually. Next step after loading manually is to save your config file. This should take care of the reset back to factory default issue. If this does not take care of the problem please call into the support center. The number to call is 1-866-606-1866. Also please if you have to call in let the support center engineer know the steps you have already taken.
    Thanks
    Quendale

  • I have a cp1215 has started to be extra slow have reset to factory defaults and reinstalled driver

    I have a cp1215 has started to be extra slow have reset to factory defaults and reinstalled driver on the computer etc....
    I think where it is taking the most time is in the deleting from the print queue.  I have an HP desktop computer with 3gb ram on windows xp. even if all I am doing is printing a test page with no other programs started it takes for ever to print a page.
    any help would be appreciated

    Hi Mikeryan,
    Have you tried turning off bidirectional communication?
    Open your printers and faxes folder, right click the icon for your printer, and choose printer properties.
    Go to the ports tab, and un-check "Enable Bidirectional Communication".
    Restart your computer, and try printing to see if the issue has been resolved.
    Hope this helps
    I am an HP Employee
    Click the KUDOS Star to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"

  • IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without resetting to factory defaults?

    IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without having to reset to factory defaults? I have both iCloud and iTunes backups....

    No.
    Apple has no support or provision for reverting to a previous iOS version.
    Try a reset of your iPad by holding down the power button and hone button simultaneously until your iPad screen goes black and the Apple Logo reappears on screen, then let go of the buttons.

  • Satellite L300-20D - Reset to factory default - How?

    Hi,
    My Laptop is Kind Of Messed Up At The Minute And I Am Looking To Reset To Factory Defaults.
    Can Anyone Tell Me How To Do This?
    Thanks.

    Hey,
    The exact procedure for HDD recovery is described here:
    http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    But therefore the original OS from Toshiba (Vista) must be installed. If you have installed another OS you have to use the Toshiba recovery disk that you created.
    The installation from Toshiba recovery disk you can start if you boot from CD/DVD drive. Then follow the screen instructions to install Windows.
    Its very easy because all drivers and tools will be installed automatically.
    Please send some feedback if it worked or not. ;)

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • PAP2T - NA cannot reset to factory default

    i bought PAP2T-NA adapter from amazon and I want to upgrade the firmware. I am trying to access the admin page but it keeps asking me for the password.  I do not know. I tried entering **** and 73738# also but it keeps saying enter the password and hit # sign.
    i cannot reset this device to factory default. can some one help or i am doing something wrong?
    I bought from amazon unlocked version.
    thank you

    Re: PAP2T - NA cannot reset to factory default
    (Mod note: Removed non-public information. Thank you.)
    Message Edited by Vince_02 on 01-29-2010 10:57 AM

  • I have disabled ipod touch.. how can i unlock without resetting to factory default?

    i have a disabled ipod touch. how can i unlock with password without resetting to factory default?

    You can rstore from backup but you must restore the iPod
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Cisco IP Phone 7912 reset to factory defaults

    Hi to all
    Please I ned some advice , I was try to reset to factory defaults a Cisco IP Phone 7912 and I was Ciscfailed .
    Please can you help me ?
    Thanks a lot !
    Hugo Baez

    Hi to all
    Please I ned some advice , I was try to reset to factory defaults a Cisco IP Phone 7912 and I was failed .
    Please can you help me ?
    Thanks a lot !
    Hugo Baez

  • Why WRT610N Automatically Reset to Factory Defaults?

    I have been using the WRT610 for few months, this router and others such as NAS, W1Max Modem, Switches power source connecto thru Belkin Power Surge Proctector.  This few months I found many times the router automatically reset to factory defaults after power down and up.  I have long history with Linksys products and this is the first ever router that automatic reset itself to factory defaults and I can find out why. 
    For quick power on off I always power down the entire power source at Belkin on/off switch and always wait at least more than 5 seconds, but many times after the power on/off I found cannot connect to the router and all I found are the router reset to factory defaults, any one can explain why and how?

    I have finally got the time to upgrade the firmware and it turn out to be the same version as my router existing firmware.  The reason I did that because the router reset itself to faultry setting again.  Wonder anyone has such experience as mine?  I roughly recorded it almost once per month the router reset by itself.

  • WRT160Nv3 has resetted to factory defaults himself

    Hello, today I got up and discovered that my WRT160Nv3 router has resetted to factory defaults himself, the name of the Wifi network was "linksys" and all configurations were the defaults...
    That's normal? This is the first time it happens.

    I've never had that happen....and I don't think it's normal. Make sure you're using WPA or WPA2 wireless security and don't use "admin" for your router password. Also make sure your router is not over heating and is well ventilated....at least 2 feet away from other electronic devices.
    Search the forum/board as I'm sure other people have had it happen.

  • HT4175 If I enable Erase Data will it reset to factory default

    If I need to wipe my old iPad of personal data to sell, but don't know the restrictions passcode, can I enable Delete Data? Will this make the iPad inoperable or will it just reset to factory settings?

    Hey seips1,
    Thanks for the question. Yes you could do this, however there may be easier methods:
    A) Restore your device with iTunes:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    B) Erase your device with iCloud:
    iCloud: Erase your device
    http://support.apple.com/kb/PH2701
    You’ll also want to disable activation lock (turning off Find my iPhone, deleting your iCloud account) from the device before selling the device:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    Thanks,
    Matt M.

  • Couldn't find wired network printer - Reset to factory defaults solved the problem

    In the hopes of helping others who may have this problem - I got a new E3000 router and set up everything fine but could not see my Brother HL5250DN wired printer on the network.  Tried everything including the Brother "network repair tool", nothing worked.  Finally I did a reset of the printer to factory defaults and presto, it appeared on the DHCP table!  So if you can't find a device like this try resetting it according the the manufacturer instructions.  Pulling the plug or turning it off and on may not be sufficient. 
    For my 5250 the reset involved turning the printer on while holding the GO button down, then after the LED's go off, press GO six times.  Pretty arcane procedure but it worked.  Problem solved. 

    How about you try these troubleshooting steps:
    Reboot the router (for 30seconds)
    Wait for the power light to blink TWICE
    Reboot the router again (for 30 seconds)
    Wait for 2-5mins for the power light to get solid
    Check then if you can ping the router ; try to configure it
    Once the router will respond, try to set it up manually. For further instructions to set it up manually, refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection.

Maybe you are looking for