E3000 wont allow streaming of some video content to IPhone 4s

I have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.
There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.
Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
Any suggestions?

There might be some settings required in the router so that it gets the proper signal strength. Well you can try the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Similar Messages

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • HT1296 i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

    i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

    In iTunes, Advanced>Create iPod or iPhone version

  • I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Stupid Question :) I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

    Stupid Question I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

    You can do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859
    Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
    http://geethree.com/slick/index.html
    Further useful information here:
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169

  • I shot some video on my iphone and can not find a way to upload the videos to my Mac.

    I shot some video on my iphone and can not find a way to upload the videos to my Mac. I can not find anything in the iPhone manual or in these discussions. I am sure there is an easier way than emailing each file to myself. Help!

    Connect your iPhone to your Mac and start the Image Capture app. It's in the Utilities folder which is in the Appliations folder on your Mac.

  • Problem with some Video Content not able to be shown. no Plug in for it

    I am getting a Problem with some News Sites Articles Video Content not being able to be shown, BBC, YAHOO,etc I am getting the message/has content of Mime type Audio/x -pn-RealAudio-Plug in Because you dont have plug in for this mime type it cant be displayed. Also I am getting a Message Url not Valid
    Help Please. Thanking You
    I .Mac 17   Mac OS X (10.4.8)   intel core 2 duo

    Did you install Real Player (free version)?
    <https://order.real.com/pt/order.html?country=US&langu
    age=EN&mppi=0&mppos_list=0&mpst=0&ppath=cpmacpl060204a
    &pageregion=playerbutton&pcode=rn&opage=realhomespma
    cbb&src=realhome_spmac_bb_0_1_1_0_0_20>
    Okay, so here's a question from a new to mac guy. Many issues on old PC with real player and Media Player not getting along. Eventually had to delete real player and had to reinstall windows. I would like to avoid third party software if possible and stick with Quicktime. How do I install the mime plug in without installing Real Player?
    17" iMac   Mac OS X (10.4.8)   intel duo
    17" iMac   Mac OS X (10.4.8)   intel duo

  • 3.6.16 doesn't support Mac PowerPCS so some video content will not load

    I am running Mac OS 10.4.7 on a Mac Mini Power PC. Firefox 3.6.16 does not support Power PCs (i.e. pre Intel). Video content on many sites will not load using 3.6.16 and I cannot use this version of your browser. I am happy to keep using 3.6.12 which does support Mac Power PC but 3.6.16 keeps downloading automatically even though I have set Advanced controls in Preferences to not do this (unchecked the three boxes enabling auto updates). I am extremely unhappy about this. Can you tell me some way I can stop 3.6.16 from automatically downloading and updating my browser against my wishes?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • HT201302 i want load some video to my iphone from computer having windows 7

    I want to know the procedure to load video to my iphone from computer having windows 7. Please assist on same.
    Thank you
    Rohit Darekar

    And it won't by design and intention since you are not syncing your iPhone with your iTunes library on your computer. 
    If you have authorized the computer with your iTunes account with iTunes, with your iPhone connected - at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.  
    For contacts and calendar events, is Outlook 2003, 2007, or 2010 available?

  • Macbook pro late 2011 wont allow streaming movies from overdrive

    Please help.Why won't my macbook pro late 2011 allow me to stream movies from overdrive (library app) to watch on my computer?

    Thanks for answer (shldr2thewheel).

  • Cannot stream iCloud video content on iPhone 4S but can do it on iPhone 4?

    Hello everyone,
    I have 2 iPhones at the moment: an iPhone 4S & an iPhone 4. They're both connected to the same iTunes account yet the iPhone 4 has more movies showing up for streaming than the iPhone 4S (in the picture iPhone 4 is on the left, iPhone 4S on the right).
    I've tried disconnecting the iTunes account then reconnecting it. I've tried to toggle on/off the "show all videos" option in the settings & nothing changes.
    Both iPhones are updated to iOS 7.0.2 & have more than enough free space (although streaming shouldn't take up much space on the devices, that's the whole point of streaming).
    Any ideas on what could be going on?
    PS. got a 3rd generation iPad (retina) & it too only shows 2 movies!

    Hi there BVslp,
    If you had iCloud backup enablesd before you updated, then you may find the information in the article below helpul.
    iCloud: Restore your iOS device from iCloud
    https://support.apple.com/kb/ph12521
    -Griff W.

  • HELP - I need to recover some videos deleted from iPhone 4

    Can someone please recommend me a FREE software which will allow me to recover deleted date.
    It needs to be Mac compatible.
    Even if it's a FREE trial software which will let me recover 1 file 1 by 1 that's fine too as I only need to recover about 4 5 files.
    Thanks.

    made2win wrote:
     My iphone was doing a 'Back up' and it was taking forever, i searched on google and ppl were saying even with 20GB of music the back up should only take a few secs mins. So i did a force quit to stop it
    And when I opened itunes again it asked if i wanna set up a new iphone or restore from backup.
    I did restore and now I have about 5 videos missing, rest is fine.
    There are 2 ways for you to recover deleted videos from iPhone:
    Solution 1.Scan and extract iTunes backup to recover videos from iPhone 5/4S/4/3GS
    Step 1: Select the device backup to scan
    Step 2: Recover deleted iPhone videos
    After the scan, the whole backup content are extracted and also displayed. You can check the video which is in .mpeg format in general, and click "Recover" on the top menu to store it on your computer.
    Solution 2.Directly scan and recover deleted videos from iPhone 4/3GS
    Step 1:Connect your iPhone to the computer
    Launch the recovery software on your computer, and connect your iPhone to the computer with a digital cable.
    Step 2:Enter the DFU mode and scan iPhone
    Enter the DFU mode with your iPhone:
    1. Hold your iPhone and click "Start" button.
    2. Pressing "Power" and "Home" buttons simultaneously for 10 seconds.
    3. After 10 seconds, release "Power" button, but keep holding "Home" for another 10 seconds.
    When you're told that you've entered the DFU mode, release the "Home" button
    Step 3: Preview and recover deleted videos from iPhone
    When the scan over, all your data on your iPhone or lost from iPhone are found and listed in organized categories.

  • I have a 2T apple time capsule and router. I bought a Hauppauge WinTV extender which allows regular TV to be broadcasted on a PC. The program allows streaming to a Mac or iPad, iPhone, etc. I need to open a port on the router to allow this to work.

    I have a 2T apple time capsule and router. I bought a Hauppauge Win TV extender which allows TV to be broadcasted on a PC. The program allows for the TV to be streamed on a Mac, Iphone, Ipad. I need to access the router set up options to open a port on the router to allow this program to stream the TV to the Mac and Iphone. I do not know how to access the apple time capsule router to change the settings to open a port on the router. help please.

    Firstly you do not need to open ports to stream locally.. there is no port block in local LAN.. only WAN to LAN. So there is a good chance it is not needed at all..
    Opening ports on the TC I strongly recommend a v5 airport utility.. you can download one for windows if you don't have a Mac.. iOS version of the utility I am not sure but it will not work to do complex things.
    In the v5 utility go to the NAT area, and click on port mappings.
    Sorry I don't have a screen shot at the moment of the actual mapping page.. but simply put the IP of the device you want opened and the port.
    There are plenty of posts with this info if you google.
    But as noted.. this is purely WAN to LAN.. nothing else.

  • My wife sync her 4s iPhone with iTunes and then delated some video off the iPhone  lnow we can't find vids on our mac is there a way to retire the vids thanks

    my wife synic her ipone 4s to our Mac using itunes.  she then delated some of the vids off the phone  now cant find deleted vids on the Mac is there something we can do

    restore from her backup http://support.apple.com/kb/HT1766
    sycning your phone to the Mac doesn't transfer it to the Mac, you would need to import pics/videos to the mac http://support.apple.com/kb/HT4083

  • I bought a genuine apple digital av adapter and it only displays some videos from my iphone 4 to my tv

    I Can not get my iphone 4 to play through my tv with a genuine apple digital av adapter on just one video site. Does the av adapter support many video formats or not?? Please help

    Have you tried resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

Maybe you are looking for

  • Tool or Package to run fuctionality of CRM in SAP ECC 6.0

    Hi All My requirement is to run multiple product schemes for free goods. We have not implemented CRM in our company. I know standard SAP support 1:1 free goods functionality,but am looking for tool or package which will help me to run the process lik

  • Oracle Job in case of heterogenous services

    I am trying to transfer some data automatically after every 30 min from MS Access to oracle. What I have done is- 1. Created a ODBC connection and DB link using that DSN and now I can access the data from Oracle to MS Access. 2. I have written a stor

  • Daily 2 1/2 hour spam hit

    Every day, same time each day, I get two and half hours of SPAM (1,000s of messages) hitting and server for an email address that does not exist on the server. What is the best way (low CPU processing) to just junk the mail and not reply in anyway. I

  • Statspack Downloads.

    I attempt to download the Statspack file: 817_prod.tar. I click the link which brings me to the disclaimer page. I click all of the check boxes, and click the "I Accept" button. I am returned to the original download page without error, and no downlo

  • Export Panel and Droplets

    After running a droplet through the Export Panel in Lightroom the action is not save to the image, whereas before the 'upgrade' it did, same action/droplet as before... Why is it not saving now?