E3200: add extra ports to forward

Hi,Is it possible to add more than 20 rules for port forwarding? The "Single port forwarding" tab allows only 20 rules. The router is used in office and we have a few virtual machines behind NAT. That VMs we need to acess from outside LAN and moreover, we need to forward not just one port to each VM but at least 3 ports to at least 7 VMs. The limit of 15 custom rules and 5 fixed rules is not enough. Kind regards,Laredo 

 Hi Laredo. I guess there's no option for you add more than 20 rules since it's a product design, but you may get some ideas from this link: Add more port forwarding slots? WRT300N V1.1   

Similar Messages

  • Router won't save settings of Single Port Forward or Port Range Forwarding

    Hi everyone, I'm having a bit of trouble tonight trying to get my Playstation 3 to play games online and in doing so I'm attempting to enable Single Port Forwarding and or Port Range Forwarding.
    To start, I am using this link below this paragraph as a guide.
    http://portforward.com/english/routers/port_forwarding/Cisco/Linksys-E1000/PS3_Endless_Saga.htm
    Each time I go and set the settings and click save, it tells me the settings have been saved successfully then when I click continue onto the next page it shows they actually haven't saved at all. My router is out of it's 90 day phone support with Linksys and I refuse to pay anything extra for support so I'm hoping someone else will be able to help me with my issue since they refuse to unless I pay them.

    Hello. Sucks you ran into trouble just after PSN got back online
    Try clearing your cache / cookies then re-do the settings. Also, try using a different Internet browser.

  • Is there any way I can add extra storage to hold my Newsstand magazines?

    Is there any way I can add extra storage to hold my Newsstand magazines?

    Thanks for that.  It is what I expected.
    There are lots of WIFI and flash drives that you can plug in but, as far as I can see,  they are only useful for holding stuff pre-loaded from a PC/MAC, and can only be used via a special app.
    Let bus look forward to the day that Apple give us a memory extension socket.

  • What Ports to Forward

    I am a little confused on which server i need to forward the requests to on our sonicwall firewall. I followed this:
    http://thewolfblog.com/2014/02/08/deploying-a-2012-2012r2-remote-desktop-services-farm/
    just so you know the exact configuration. Basically, 2 separate session host, 2 separate brokers and 1 gateway (running web access). I know this has something to do with the correct ports being forwarded as it works perfectly inside the LAN. I have the requests
    forwarded to the gateway now and when i go to https://FQDN/RDWeb, i can login and see the published apps. Its when i click one of the published apps that i get this:
    In the present config, what private ip am i to forward to?

    So i actually had to remove the rdweb server from the deployment and add the rdweb access role to the gateway server to get this to work. Doesn't that defeat the purpose of having a gateway server in the first place?
    Hi,
    There is nothing wrong with having RDWeb on the same server as RD Gateway if you want.  RD Web is in essence a method to deliver .rdp files to end users.
    If you want to have RDWeb on a separate server you can.  To do this you would need to use an additional public ip address, or perhaps a reverse proxy.  For example, you might have gateway.domain.com pointing to the public ip for your RDG, and remote.domain.com
    pointing to the public ip for your RDWeb.  On the firewall you would have TCP 443 and UDP 3391 forwarded for gateway.domain.com and only TCP 443 forwarded for remote.domain.com
    I was wanting to use the gateway server as the only one exposed to the internet. Is there a way to do that and have the gateway server connect to the rdweb server? And without access to the rdweb we would not be able to use the rdweb feed, right?

  • Add extra field in alv

    Hi experts,
    i want to add extra field in alv that is totalprice
    the total price = qunatity * price
    already quantity and price from data base tables
    but the field total price is not from any table..
    thanks advans

    Hi,
    Quantity and Price both are ddic fields.
    Define the TOTAL PRICE of the type Price in the final internal table(table to b displayed).
    before passing the data / in looping define the logic...
    LOOP AT T_SOURCE.
    T_FINAL-PRICE = T_SOURCE-PRICE.
    T_FINAL-TOL_PRICE = T_FINAL-QTY x T_FINAL-PRICE
    ENDLOOP.
    Now all the required values are in the final table.
    Reward if helpful.
    Thanks.

  • How do I add extra flash memory to My Macbook Air Model MD223

    Hi,
    I would please like to know if there is any possible way to add extra flash storage to My MacBook Air 11.6" (2012) Model MD223 with 64GB. I am using Mac OS X Mountain Lion 10.8.3
    Could I please get some help?
    Thanks a lot in advance,
    Neelu Saraswatibhatla

    Welcome to Apple Support Communities
    You can upgrade that, but you will void the warranty. That MacBook Air requires flash storage that it's not sold everywhere, so you can purchase more flash storage at OWC > http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2012
    You can't install a SSD with the enclosure because it doesn't fit

  • How do I add more ports to my new Airport Extreme?

    How do I add more ports to my new Airport Extreme?  What do I need to buy?

    Thinking to leave as is for now-  one 2013 extreme.
    That would certainly keep things a lot simpler.
    Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
    A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
    I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
    Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan.  I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
    The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
    One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

  • Unable to Save in Port Range Forwarding

    I'm using the BEFW11S4 wireless router and am unable to save the new port range forwarding settings I have entered.  Everytime I click Save Settings, I receive a box which reads:
    "The server 192.168.1.1 at Linksys BEFW11S4 V4 requires a username and password.
    Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)."
    When I enter the same u/p that I used to access the router in the first place, it rejects and keeps bringing up the log in screen.
    I cannot get the port range forwarding to save at all due to this.
    Does anyone have any suggestions?
    Thank you!

    try remembering the password you used for first time while installing the router .... if not then use default password admin with out any username ....
    If still not working then you need to reset the router ....

  • JAVA mapping using SAX parser adds extra tags

    Hi,
      We are using  java mapping using a SAX parser.It works well in standalone application ie it parses correctly and gets our desired xml structure and the xml is well formed too but when we import it in XI as a jar file it does not throw any errors but adds extra start tags, as a result the output xml is not well formed.XI is adding extra start tags.
    If any one else has faced a similar situation please help.
    Regards,
    Anirban.

    Hi Roberto,
    Thank you for the response.
    As I said, it doesnt throw any error. It is working perfectly in standalone application. But when we deploy it to XI Server, it is not forming the well formed XML. We too are puzzled by this situation.
    Okay, i will explain my scenario here.
    The following is my input XML to the java pgm..
    <Header>
    </Header>
    <Body>
    </Body>
    <SubBody1>
    </SubBody1>
    <SubBody2>
    </SubBody2>
    <SubBody3>
    </SubBody3>
    <SubBody4>
    </SubBody4>
    <Trail>
    </Trail>
    The desired output is
    <Header>
      <Body>
         <NameChanged1>
            <NameChanged2>
    <SubBody3>
    <SubBody4>
    </SubBody4>
    </SubBody3>
    </NameChanged2>
    </NameChanged1>
    <Trail>
    </Trail>
    Just look at the SubBody2 and SubBody1 node, its tag name has been changed in the output XML. Thats y i have decided to use java mapping instead of message mapping.
    I have developed the code for everything, i.e for changing the tag name and for forming the nested xml and it is working fine as a standalone application. But while deploying it to XI, the output is not well formed. I dont know the reason for it. Even I have checked the cardinality of the output Data types, that I have created. Its perfectly okay with all.
    Any Ideas???
    Regards,
    Anirban

  • How do I add extra pages to template documents in the new version of pages which carry over the same formatting, borders etc?

    Hi,
    Does anyone know how how to add extra pages to template documents in the new version of Pages which carry over the same formatting, borders, styles etc? In iWorks09, all styles, borders etc just used to carry over to the next page. In the new Pages, this doesn't seem to happen. Unless I'm missing something.
    Any help would be appreciated.

    Everything is a matter of degree! (Speaking for myself).
    Review and rate Pages 5 in the App Store and if you are interested check out all the changes here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Peter

  • Add air port to time capsule

    add air port to time capsule

    Which AirPort model will you be adding to the Time Capsule network?
    Do you plan to add the AirPort by connecting it using a wired Ethernet connection to the Time Capsule?
    or
    Do you plan to add the AirPort by connecting it wirelessly to the Time Capsule?
    What operating system are you running on your Mac?

  • How to add extra per day records based on maximum occurances in the week.

    Hello,
    I need to add extra records based on maximum occurances on a day in a week.
    For example, the result of the query shows that maximum occuances in a week 0 is 3 on so I need to add empty records in each day in that week.
    SQL QUERY:
    with  numbers as (
    SELECT ROWNUM N FROM dual 
      CONNECT BY LEVEL <=35
    ),months as (
    SELECT     ADD_MONTHS('01-JUN-10',n-1) AS current_month,
         TO_CHAR(ADD_MONTHS('01-JUN-10',n-1),'fmMonth-YYYY') AS current_month_label
    FROM numbers
    WHERE ADD_MONTHS('01-JUN-10',n-1) <= NVL(add_months('01-JUN-10', :monthcount-1),:p_month)
    ORDER BY n ASC
    ) , dates as (
    select     trunc(trunc(m.current_month, 'MM'), 'D') + n - 1 calendar_date,
         trunc((n - 1) / 7) AS week_num,
                    m.current_month as current_month
    from     numbers, months m
    where trunc(dom.schedule.calendar_begin(m.current_month) + n - 1, 'd') <= last_day(m.current_month)
    Order By week_num, calendar_date
    select dates.week_num, edate, name from (
    --week 0
    select '30-MAY-10' as edate, 'JJ' as name from dual union
    select  '31-MAY-10' as edate, 'MK' as name from dual union
    select  '01-JUN-10' as edate, 'MK' as name from dual union
    select  '01-JUN-10' as edate, 'BK' as name from dual union
    select  '01-JUN-10' as edate, 'JJ' as name from dual union
    select  '04-JUN-10' as edate, 'KK' as name from dual union
    select  '04-JUN-10' as edate, 'LA' as name from dual      union
    -- week 1
    select  '06-JUN-10' as edate, 'BK' as name from dual union
    select  '06-JUN-10' as edate, 'JJ' as name from dual union
    select  '07-JUN-10' as edate, 'KK' as name from dual union
    select  '11-JUN-10' as edate, 'LA' as name from dual      
    ) a  join dates on dates.calendar_date = a.edate   
    order by week_num, to_date(edate);CURRENT RESULT :
    WEEK_NUM             EDATE                NAME
    0                   30-MAY-10            JJ
    0                   31-MAY-10             MK
    0                   01-JUN-10             MK
    0                   01-JUN-10             JJ
    0                   01-JUN-10             BK
    0                   04-JUN-10             KK
    0                   04-JUN-10             LA
    1                   06-JUN-10             BK
    1                   06-JUN-10             JJ
    1                   07-JUN-10             KK
    1                   11-JUN-10             LAREQUIRED RESULT:
    WEEK_NUM             EDATE                NAME
    0                   30-MAY-10             JJ
    0                   30-MAY-10            null
    0                   30-MAY-10            null
    0                   31-MAY-10            MK
    0                   31-MAY-10            null
    0                   31-MAY-10            null
    0                   01-JUN-10             BK
    0                   01-JUN-10              JJ
    0                   01-JUN-10             MK
    0                   02-JUN-10             null
    0                   02-JUN-10             null
    0                   02-JUN-10             null
    0                   03-JUN-10             null
    0                   03-JUN-10             null
    0                   03-JUN-10             null
    0                   04-JUN-10             KK
    0                   04-JUN-10             LA
    0                   04-JUN-10             null
    0                   05-JUN-10             null
    0                   05-JUN-10             null
    0                   05-JUN-10             null
    --Number of Week 1 records should be 14 = (max occurances on 06-JUN-10)  * 7
    1                   06-JUN-10             BK
    1                   06-JUN-10             JJ
    1                   07-JUN-10             KK
    1                   07-JUN-10             null
    1                   08-JUN-10             null
    1                   08-JUN-10             null
    1                   09-JUN-10             null
    1                   09-JUN-10             null
    1                   10-JUN-10             null
    1                   10-JUN-10             null
    1                   11-JUN-10             LA
    1                   11-JUN-10             null
    1                   12-JUN-10             null
    1                   12-JUN-10             nullI would appreciate it if you could help me to find efficient way to achieve this?
    Thanks,
    GM
    Edited by: user12068331 on Sep 28, 2010 2:17 PM
    Edited by: user12068331 on Sep 28, 2010 2:48 PM

    Ok,
    Few things to clarify first :
    1 - How do you define week number ?
    Oracle has 2 different way for week number : normal week number (WW) and isoweek (IW).
    is your weeknumber one of those, or is it something else ?
    2 - Depending on the country the week doesn't start on the same day : in France (as most of Europe I think) first day is monday, where in the USA (as far as I know) first day is sunday.
    the to_char builtin function can display weeknumber :with a as (
    --week 0
    select 0 as weeknum, to_date('30-MAY-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 0 as weeknum, to_date('31-MAY-2010','DD-MON-YYYY') as edate, 'MK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'MK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'BK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 0 as weeknum, to_date('04-JUN-2010','DD-MON-YYYY') as edate, 'KK' as name from dual union all
    select 0 as weeknum, to_date('04-JUN-2010','DD-MON-YYYY') as edate, 'LA' as name from dual union all
    -- week 1
    select 1 as weeknum, to_date('06-JUN-2010','DD-MON-YYYY') as edate, 'BK' as name from dual union all
    select 1 as weeknum, to_date('06-JUN-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 1 as weeknum, to_date('07-JUN-2010','DD-MON-YYYY') as edate, 'KK' as name from dual union all
    select 1 as weeknum, to_date('11-JUN-2010','DD-MON-YYYY') as edate, 'LA' as name from dual
    select to_char(a.edate,'IW') isoweek, to_char(a.edate,'WW') numweek, a.*
    from a;
    IS NU    WEEKNUM EDATE                          NA
    21 22          0 Sunday    30/05/2010 00:00:00  JJ
    22 22          0 Monday    31/05/2010 00:00:00  MK
    22 22          0 Tuesday   01/06/2010 00:00:00  MK
    22 22          0 Tuesday   01/06/2010 00:00:00  BK
    22 22          0 Tuesday   01/06/2010 00:00:00  JJ
    22 23          0 Friday    04/06/2010 00:00:00  KK
    22 23          0 Friday    04/06/2010 00:00:00  LA
    22 23          1 Sunday    06/06/2010 00:00:00  BK
    22 23          1 Sunday    06/06/2010 00:00:00  JJ
    23 23          1 Monday    07/06/2010 00:00:00  KK
    23 24          1 Friday    11/06/2010 00:00:00  LA
    11 rows selected.

  • How to add extra blank space in xml

    I open the xml file in notepad I get this
    <XXON_EXT_BANK_ACCOUNT_NAME>創名聯合會計師事務所                                        </XXON_EXT_BANK_ACCOUNT_NAME>
    But when I open the xml file in html format the blank space is gone.
    How can I add extra blank space in xml?

    Hi
    Why do you need the extra space for?
    This difference in display that you see between your browser and notepad/notepad++
    will not affect your generated report.
    Bogdan 

  • Need to add extra Payment modes in Claim Advance Request

    Dear Friends,
    I need to add extra Payment modes such as Corporate Credit Card and Company Card options in Payment mode option dropdown list  in ESS Claim Advance Request against a Reimbursement type.
    Below is the original thread created by me with screen shot. As per group members suggestion diverting this query from Travel mgmt forum to SAP HCM Forum
    Need to add extra Payment modes in ESS Travel management against a Reimbursement type
    Expecting solutions from HCM Experts !!
    Regards,
    Nayak

    Dear Experts,
    Any suggestions?
    Regards,
    Nayak

  • Add Extra Columns into Multi-Level Explode BOM (List Report)  - CS12

    Hi Experts,
    I wish to add extra columns into the list report generated from program RCS12001 (calling from t-code: CS12). The current layout will be AS-IS and the only way i wish is to add-in few new columns in the report.

    Hi
    declare select-options instead of parameters
    for converting a report to ALV
    create a field catalog.
    for this two option declare a itab with       
    fcat    TYPE slis_t_fieldcat_alv
    and pass the field name,descr etc to fcat and append the same.
    or create structur same as your itab and pass the same with FM
    'REUSE_ALV_FIELDCATALOG_MERGE'
    use either <b>reuse_alv_grid_display or reuse_alv_list_display</b> .
    and pass the itab.
    thanks
    Shiva

Maybe you are looking for