E3200 Port forwarding doe's not work

I have Linksys E3200 and do forwarding as described Here, but it act like it does not check forwarding rules, no forwarding happens, I'm trying to open RDP(3389) port, from local network I can connect normally. routers firmware version is Ver.1.0.05, I have protocol analizer on pc where i'm trieing to forward packet, the packets don't reach PC on 192.168.0.254

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?

Similar Messages

Port forwarding for SSH not working on WRT54G2

Hi,
I have forwarded a few ports, but can't get port 22 for SSH to work. I can SSH from within LAN, so that works. And I can access FTP from outside the LAN, when I forwarded that port. But to the same computer where I can access FTP I can't access SSH...
Would be grateful for assistance. Btw, I'm using dynamic IP (through DynDNS, but not using the DynDNS tool in the Linksys interface). I've tried with both the dynDNS domain and the IP address. And I have set a fixed IP address on the server I try to access.
Thanks,
Daniel

Make sure that if you are forwarding the port nos for SSH on WRT54G2 you need to forward it for the assinged static ip address & it should work great..just try it once.

Port Forwarding / Mapping is not working !?

I've tried everything, searched on Google and nothing seems to work !
First of all, let me explain my problem. I have a Time Capsule connected to my Modem. From my Time Capsule I have a Airport Extreme connected by ethernet on my second floor. So what I want to do is to open the ports 6112 to 6118 on my iMac which is connected by ethernet to my Airport Extreme.
*These are my setting on my Airport Extreme:*
Connexion via Ethernet in bridge mode.
IPv4: via DHCP
*These are my setting for my iMac's network:*
IPv4: DHCP with a manuel ip adress set to 10.0.1.201
*These are my settings on my Time Capsule:*
Connexion via Ethernet and sharing a public Ip adress.
IPv4: Via DHCP
First DHCP Adress : 10.0.1.2
Last DHCP Adress: 10.0.1.200
NAT-PMP Activated
*I also opened the ports in the port mapping section, these are my settings:*
Service: I didn't choose a service
UDP Ports public: 6112-6119
TCP Ports Public: 6112-6119
Private Ip adress: 10.0.1.201
UDP Ports private: 6112-6119
TCP Ports Private: 6112-6119
Now, when I go on the website: http://www.whatsmyip.org/ports/
and do a port test, it says it is closed, there must be something i am doing wrong...
Now if you are wondering why I have set my iMacs IP Address to 10.0.1.201, it is because on all the website I searched an answer they were telling my to put my iP address bigger than the First-Last DHCP Range of my Time Capsule which ends at 10.0.1.200, so I've put 10.0.1.200. I have also tried with other ranges and another ip address within the range and everything, but nothing has worked.
I really hope someone will/can help me,
Thank You very much for your help, and also sorry for my English as I am not very good at it because it isn't my primary language.
Thank you for your comprehension.

This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File. Once that's done you may have to do a little adjustment to account for the disk drive.

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

All Ports/Plugins Do not work. Compaq Presario SR5233WM Desktop PC

Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

Hello again ZhayneW,
Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Does not open default site.Needs retry in favorites. Back and forward arrows do not work

Facebook is the defaulkt address but, when I open Firefox thw scrren is blank (bar are present, though). This happens after last review
In addition, back and forward arrows do not work (this has always happened since Firefox 4 beta)

* First to prevent interferences between current and Beta versions, use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta. In your new Beta profile, you can recover all your customizations from your 3.6 profile. See [[Recovering important data from an old profile]].
* Then, if it is not fixed, see [[Back and forward or other toolbar items are missing]].

Back and forward arrows do not work why?

Since upgrading to 4.0.1 The back and forward arrows do not work. I've tried uninstalling and installing a number of times. Can you help please!

Right click the Back / Forward buttons to get a list of sites visited.
You can also install this add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

E3000 ports 2 and 3 not working

I have 4 computers hooked up(wired) to the E3000, i noticed that the ports 1 and 4 work(have internet and are lit) and ports 2 and 3 do not work at all. Cannot accuses routers page along with that. I did a clean install(factory settings/restarted) and tried the same ports, they still do not work. I looked at the routers settings, the ports are not blocked, is this a defective item?

First press and hold the reset button on the router for 45 - 60 seconds and then reconfigure the router from scratch. Now the ports should work and even after re-configuring the router, If the port number 2 and 3 is not working then it's a hardware fault.

Have had to reset several times , also log in doe's not work

1. Log in doe's not work correctly how do I get it reset ?
2. I have had to reset several times in the past two week's to get FF-23 to work properly (for a little while) , when FF-23 screws up it will not display content of some sites properly and will not allow link's within G-mail to open .
Any help for the above ?
Using Win-7 / 64
Do not have this trouble when using Chrome, DO NOT use Internet Exploder at all.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Port forwarding externally but not internally

I've got an AExtremeBS at home and at work. I've been port forwarding http for a while with no problems internally or externally. I've recently configured a new web server which internally is hosted on port 80. I've enabled port forwarding from 8080 to 80 on the AEBS and it works fine externally. However, if I try to browse the site internally using the FQDN:8080 of my AEBS, it does not work.
I can check both external and internal and the external is still working while the internal is not.
Any ideas?
One idea would be to move my internal listener to 8080 and just port forward 8080 to 8080 (I would just redirect 8080 to the internalIP:8080 rather than map 8080 to internal:80).
Thanks,
sid.

You might be onto something....but it's probably not what you think, but then again, I just confused myself again.
To get OD working I had to add my Leopard Server to my DNS settings. The Leopard Server required that it resolves the FQDN of the AEBS to itself (the internal IP address). However, everything else on the network resolves the FQDN to the external IP address.
If I nslookup on my FQDN, from my mac (which has the Leopard Server as it's DNS server) I get the internal IP address of the Leopard Server. However, if I go to another machine inside my network which does not query DNS from the Leopard Server, I get my external IP and when I browse to extneral:8080 it port forwards correctly. So it wasn't the AEBS, it was my particular mac and freaking Leopard Server.
So, it's settled, Leopard Server strikes again. I can't believe that Apple released this POS. I had a much easier time with Ubuntu 6.06 on my old 300 MHz blueberry iMac.

Call forward to VM not working

Hi All;
we have switched from TDM to SIP trunk. after that call forward to voicemail and also automated attendant don't work. then I changed VM pilot number to full number instead of 6000. still when inbound call is received, and called party doesn't answer the call, it is supposed to forward to VM but call is failed. also when somebody calls to main number, it is supposed forward to AA, but call is failed. very appreciate, if there is any suggestion.
thanks
Alex

The problem is that Unity sees the forward call as "forward" actually is not a problem is the normal behavior. What we need to do is to Unity see the call as "Direct" configuring Routing Rules resolve the problem
Try:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800a6a14.shtml

Mini display port to HDMI adapter not working

I can not get my MacBook OS X to dispaly on my new Samsung LED TV. I have a mini display port to HDMI adapter (two years old) conneted with an HDMI cable (new) into the HDMI input on the TV. I tried both inputs, tried resetting the TV, plugging, unplugging, restarting, checked all my system preferences...I can not figure it out. I took my cables to a local store, tested the HDMI cable, and it works. Tested the adapter and they had the same problem I have on my Mac. The screen will flash blue when you plug it in, but will not show up in the TV. I think the adapter must be bad, nothing else makes sense???

Hi Kater24,
Apple doesn't make a Mini DisplayPort to HDMI adapter, so the one you've got there is a 3rd party one that's designed to work with the Mini DisplayPort on your Apple computer. The adapter is pretty much plug-n-play, there's no configuration necessary. Plug it into the machine, the HDMI cable from the other end of the adapter into your TV, select the HDMI input on your TV and fire up the computer.
If that's not working it's possibly an issue with the adapter and/or cable to the TV. Any chance you might have access to another TV for troubleshooting purposes?

Need help one USB Port on MacBook Pro not working

Its been a weak now and im getting tired of my MacBook pro USB not reading anything.. It wont read/connect usb drives, IPods/IPhones/IPads, and Android phones. I have tried the PRAM and SMC resets and nothing has worked i even left my Macbook pro off for a whole day. ITS ONLY ONE PORT NOT WORKING, i took it to bestbuy because its closest to me but geek squad just did what i explained above and told me get a USB hub and NO! i want to fix this issue... Anyone has had this happen can you let me know if its because the USB port is no longer working or a software issue... Also i keep getting this notification telling me USB devices disabled draining to much power but i have nothing connected!!
ps- my MacBook Pro is getting very hot fast and it happens when im not even using it, i get home and it very hot could there be another hardware failure i dont leave applications open when i sleep it.

It sounds like you might have a hardware problem. Your best bet is to go to the Genius Bar. The evaluation is free, and they'll fix it if you're under Applecare. Back up your stuff first though.

E3200 Port forwarding doe's not work

Similar Messages

Maybe you are looking for