E416 Brain Error: Infoobject is used in both structures of query

Hi there,
I got a problem with a restriction of keyfigures.
My coloumns got two structures. In one of them are restrictions to a specific characteristic.
But now the other structure needs a restriction based on the same characteristic.
Based on following post I already know it is not possible to use one characteristic in two structures for restrictions.
http://scn.sap.com/thread/3276852
But can you tell me how I can do that?
I need both restrictions.
Thank you and kind regards.
Matthias

Hey Cornelia,
thanks for your reply.
When I overwrite a cell with a new selection (right mouseclick on the cell -> new selection) I get an Error 106 "A key figure has to be uniquely specified in all cells.", because the coloumns are keyfigures and the rows are characteristics.
So I think your first suggestion ist pretty good but unfortunately not useful for my case.
The second suggestion must be agreed so I won't be able to test it in near future.
But I will respod when I have some news.
Thank you so far!!
Kind regards
Matthias

Similar Messages

  • BRAIN416 InfoObject 1KYFNM is used in both structures of the query

    Hi Expert,
    I have some problem with MDXTEST on BW 3.5 which i select multiprovider to generate MDX Staement but it goes to ABAP Debugger "CX_RSR_PROG_ERROR" and message BRAIN 416 information said "InfoObject 1KYFNM is used in both structures of the query".
    Anyone please explain me what should i do????
    Thank you for your help
    =SJ=

    Dear RajNi,
      In This Multiprovider A, i use only 1 infoset which only 1 ODS B.
      I'm so confuse because i create new ODS like ODS B and do step like Multiprovider A.
    Please help me if you have ever seen like that.
    Many thanks
    =SJ=

  • InfoObject 1KYFNM is used in both structures of the query

    I am getting the error message - "InfoObject 1KYFNM is used in both structures of the query", while executing the query. Can you please help me remove this error and proceed with the query execution?
    Thanks and Regards,
    Sachin Kalani.

    Hi Sachin,
    As the error suggested, make sure that u have used that KF only once in ur Query definition.
    Regards,
    Rajkandula

  • Error - InfoObject cannot be used to read master data

    Hi All,
    We am working on mapping objects in a transformation, on some of the transformation I am using the master data attribute to fill the infoobject.  In some cases the mapping happens without incident but in others we are getting the following error
    InfoObject  cannot be used to read master data
    Inside the long text of the message it says:
    InfoObject  does not have the correct attributes to be used to read master data for the target field
    The object is one of the master data attributes, so we are not sure why we are recieving this error?
    We have recieved it with 0COMP_CODE trying to load Fiscal Year Variant and with a non standard enhanced object ZMATERIAL which is a copy of 0MATERIAL with added attributes for Product Class, Product Group and Product Line wich come from the product hierarchy and are populated on the load of the material from product hierarchy.
    Has anyone else had an issue with this error and can you tell us how you fixed it???
    Thank you!
    Caroline

    You received this error for loading 0FISCVARNT (Fiscal Year Variant) because that InfoObject isn't an attribute of 0COMP_CODE (Company Code) and it cannot therefore determine what data to populate based on your input. Instead of using 0COMP_CODE, you may have to enter a constant value for the Fiscal Year Variant if you don't have it in your source InfoProvider.
    When you created ZMATERIAL, did you use 0MATERIAL as a reference so that it would inherit the attributes and texts? If so, Product Class, Product Group and Product Line would have to be attributes of 0MATERIAL. If you didn't reference 0MATERIAL and are loading attributes directly to the custom InfoObject attributes, then Product Class, Product Group and Product Line would have to be attributes in ZMATERIAL in order to use the Use Master Data function for transformations. You may have to derive the values for these different, such as add ABAP for lookup routines.

  • Error: InfoObject does not contain alpha-conforming value 20030729

    Hi everyone,
    I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
    I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
    Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
    But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
    But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
    I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
    PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
    Regards,
    Uroš

    hi,
    sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
    http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
    Lowercase letters allowed / not allowed
    If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
    If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
    If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
    Exclusive attributes:
    If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

  • Error Infoobject does not exists in Infoprovider

    Hi Friends,
    I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
    Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
    Thanks and regards,
    Balaraj

    Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
    Regards,
    Kams

  • Error message when using xrpcc in JWSDP 1_0_01

    Dear all,
    I've got the following error message when using xrpcc of JWSDP 1_0_01 for my config.xml file.
    D:\jwsdp-1_0_01\Message>xrpcc -classpath build -both -d build config.xml
    error: invalid element "{http://java.sun.com/jax-rpc-ri/xrpcc-config}configurati
    on" in configuration file (line 2)
    The content of 'config.xml' is shown as follows.
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration xmlns="http://java.sun.com/jax-rpc-ri/xrpcc-config">
    <rmi name="MessageService"
    targetNamespace="http://messageuri.com/wsdl"
    typeNamespace="http://messageuri/types">
    <service name="MyMessage" packageName="Message">
    <interface name="Message.MessageIF"
    servantName="Message.MessageImpl"/>
    </service>
    </rmi>
    </configuration>
    Thank you for your kind attention!
    Regards,
    Eddie

    Thanks all! I've already solved my previous problem, however, i got another one now.
    =========================================================
    error: unknown model info in configuration file (line 5)
    =========================================================
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
    <rmi name="MessageService"
    targetNamespace="http://messageuri.com/wsdl"
    typeNamespace="http://messageuri.com/types">
    <service name="MyMessage" packageName="Message">
    <interface name="Message.MessageIF"
    servantName="Message.MessageImpl" />
    </service>
    </rmi>
    </configuration>
    Thanks,
    Eddie

  • Problems saving on a travel drive used for both my mac and pc

    I have both an ibook and a pc laptop, so I use a Memorex travel drive to store many of my documents that I use on both computers. Since I have MSWord for Mac and MSWord on my PC, the majority of the files are Word files.
    However, here's my problem: Many times, I will save a Word document from my Mac to the travel drive, and the next time I open the travel drive (whether on the Mac or PC), there is a 1kb file of whatever the saved document was, with the same name as the actual document, but with a ._ before the text. For example, a 45 kb file named "CrimSummary" is saved as such, but a 1kb file named "._CrimSummary" shows up on the travel drive as well. When I open this 1kb document, it is just 5 or so lines of symbols and such.
    This whole ordeal happends with about half of the documents I save from the Mac onto the travel drive. It usually (maybe always) saves a functional copy of the document, so it does not seem to be saving this 1kb file instead of the actual file, but it makes me feel that there is something wrong with this situation. At first I thought I was ejecting the travel drive incorrectly, but I do not think that is the case - I eject both the travel drive icon and the "U3 system files" that came along with the drive - then pull the drive out. The drive is still lit, but I do not get any error messages, so I believe I am doing it correctly.
    Further, I have a few strange files on the drive that are appearing: ".DS_Store", "Bootex", and a folder called ".trashes".
    I really just want to iron this out, as I save very important documents on the drive and hope that this is not indicative of a larger issue with either laptop. Any help would be greatly appreciated! Thanks!
    ibook G3 w/Airport   Mac OS X (10.3.9)  
    ibook G3 w/Airport   Mac OS X (10.3.9)  

    What you are seeing are hidden resource files which in OS X tell you how the folder/drive will look in Finder.
    In OS X you don't see them, though Windows does pick them up.
    You can safely ignore and delete them without worry.
    It is normal behaviour to see these files.

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • Nesting error when re-using groups

    JDev 11.1.1.4, JHS 11.1.1.3.35
    I have two related objects, ObjectA and ObjectB. In my app I need a primary form for ObjectA, with ObjectB on a detail group, plus a primary form for ObjectB with ObjectA as a detail group. I create re-usable groups, GroupA and GroupB. When I re-use GroupB as a detail group on GroupA, no problems, but then when I also re-use GroupA as a detail group for GroupB I get an error:
    Nested BindingContainer of this type [GroupBPageDef] is already included in this parent BindingContainer:data.app_UIShellPageDef.mainRegion.[GroupAPageDef]_WEB_INF_adfc_config_[GroupA]_xml_[GroupA]TaskFlow.[GroupB]TaskFlowBinding.[GroupBPageDef]_WEB_INF_adfc_config_[GroupB]_xml_[GroupB]TaskFlow.[GroupA]TaskFlowBinding
    Am I setting it up wrong? Or is it just not possible to re-use in both directions like that?

    I hit the same error last week in JDeveloper 11.1.2 in an app without JHeadstart. This seems to be a limitation of ADF, not related to JHeadstart.
    Please raise this issue on the JDeveloper forum, or even better with Customer support, with a simple testcase, because it limits the reuse options for taskflows.
    Steven Davelaar,
    Jheadstart team.

  • How to under complete document to configure prerequisite using fields both

    Hi,
       When I configure prerequisite under complete document for one substitution but fialed withe syntax error when I tried use the following prerequisite:
    BKPF-BUKRS = 'XXXX' AND
    BSEG-HKONT IN SET1
      But I input this prerequisite under line item it is ok . I am wondering if there is no permit for BSEG table field under prerequisite under complete document. Pls give me some advice on how to under complete document to configure prerequisite using fields both in BKPF and BSEG. Thanks.

    Hi Mohan,
       I did active it at call point3(complete document) but my question is when I configure prerequest I am confused that only BKPF data fields can be used in prerequest. Why field in BSEG can not be used in prerequisite?  Once I input BSEG field in prerequisite there will be syntax error message shown up.

  • I have one apple ID for my MAC and another used for both my iPhone and IPad.  Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

    I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad.  When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad.  Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

    Hello chlanli
    You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Regards,
    -Norm G.

  • Error while accessing a library using content and structure

    I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
    'All Document' is name of default view on the library.
    When I open the library from view all site content the library is being opened.
    Please help!!!

    Hello Victoria,
    Thanks for  the response.
    I have tried troubleshooting steps given by you. 
    Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
    I tried with different users but no luck
    Make sure that the user account with issue has permission to view the All Documents view of the library. --
    Yes, user Account have the permission
    Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
    a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
    No other library have this problem. I cannot save the library as template including the contents as the it has many folders and  files. The current size of library is 786 MB
    Clear cache in the browser or use another browser to see if the issue still occurs. --
    tries but issue persists.
    Best regards,
    Ratnesh

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • When I try to open an embedded PDF file I get an error "The program used to create this object is AcroExch.exe.

    When I try to open an embedded PDF file (Word doc) I get an error "The program used to create this object is AcroExch.exe. That program is either not installed on your computer, or is corrupt..."  I've tried  about everything from unchecking
    protected mode at startup to removing & reinstalling Adobe.  Nothing seems to fix this issue.  Any other ideas?
    This is happening on Adobe reader 9, 10 & 11 with MS Word 2010 & 2013.  I've uninstalled, cleaned & reinstalled Reader 9, 10 & 11, as well as Acrobat 10 Pro & 11 Standard.  Removed "Protected mode at startup, and changed
    the default program for viewing from reader to Acrobat.  This will not go away.  It is affecting production at our company.

    " Help > Troubleshooting Information > Profile Directory: Open Containing Folder" . i can't find open containing folder in profile directory. it does give me the option to open the places.sqlite file using graphic converter. when i try that, graphic converter gives me a window saying that it can't be opened because it is corrupted or is not a file type supported by graphic converter.
    i appreciate your help with a workaround to get the old bookmarks. that works. however, the problem has morphed from that concern to why adobe reader [the default app.] won't open firefox .sqlite files. is the problem in adobe reader or firefox? also, how can i tell if the places.sqlite file is corrupt?
    i'm getting in over my head here and do appreciate your help.

Maybe you are looking for