E4200 and sufficient permissions to install a printer

Greetings,
I am trying to connect my Epson Stylus NX105 to my recently purchased E4200. The printer is plugged in via USB to the router, and my computer (Windows 7) recognizes the router as a device on my network. However, it doesn't see the printer attached to the router. When I try to add it, I get the error "You do not have sufficient rights to perform this operation." I do not receive this error on any other computer on my network, so I'm not sure if there's any permission settings I am missing on the router itself.
Is anyone aware of this issue? I've looked online/Google and there are alot of conflicting reports stating that the E4200 either does or does not support printing, so I not sure how to proceed. I tried mapping by IP but the setup just times out.
Any assistance would appreciated. Thank you.

I see nothing in the manual to suggest you can plug a printer into the E4200 USB port. If the printer is not network-capable (wired, wireless, or both), you can plug it into a computer via USB and share the printer through Windows.

Similar Messages

PSE 6 - dosnt have all its selections and preferences since i installed new printer driver?

Hi
I have a Mac.
Installed PSE 6 - worked great. My printer broke so got a new one - installed new driver
and now I cannot print multiple photos, contact sheet or picture package at all - they are greyed out and I am unable to select them.
Any ideas as to what i should do. ?
Thanks

Quit PSE then go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
Adobe PSE 6 paths
Adobe PSE 6 settings
Opera preferences
Repair permissions and try again.

Software update freezes and I can't install HP printer updates.

When I try to do"System Updates", it finds "HP printer support update" but the install button is greyed out and the "Update" procedure freezes.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HT201240 i forgot my password and i need to install the printer

i forgot my password and the system dosent let me install the printer

Did you see this link? Following it you can reset your password to something else.
http://support.apple.com/kb/HT1274?viewlocale=en_US&locale=en_US

Install and set-up of a wireless printer DJ2540

I am trying to start-up my DJ2540 to a MacBook Air with no slot for a CD. So far I have connected the main cable to the same outlet strip I use for the laptop, connected the printer to my laptop, checked that the power is on, but there is no light on the printer and I am unable install the print cartridges.

Plug it in and restore it. When prompted, install your backup.
http://support.apple.com/kb/HT1414

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

Problem with Printer Utility Setup when installing Epson printer

Hi everyone,
Hope some kind soul here can help me out on this.
I bought a Epson Stylus CX7300 All-in-one printer yesterday and am having difficulty installing the printer driver onto my eMac running on OSX 10.3.9.
I followed the procedure on the Epson installation disc and even called up their customer support office and went through step-by-step guides to troublesome the cause. Even downloaded the latest driver from the Epson site, and installed it, but every time I open up a document and tries to print, the following would occur:
1. When I click "PRINT", a pop-up will appear, and under the printer field, it will be indicated as "NO PRINTER SELECTED"
2. I would then select "EDIT PRINTER LIST" from the printer field - after which another pop-up will appear saying "You have no printers available. Would you like to add your list of printers now?"
3. When I click "ADD", an error pop-up will appear saying "The application Printer Setup Utility has unexpectedly quit. The system and other applications have not been affected. Would you like to submit a bug report to Apple?"
I have submitted tonnes of "bug reports" to Apple since yesterday but nothing happened.
I also tried to open Printer Utility Setup directly from under System/Applications/Utilities, but the same error will appear and it will just quit "unexpectedly".
Is there any remedy to this?
Oh, the strange thing is, the CX7300 can scan images fine, and I also managed to do a test print from Epson's utility.
Thank you.
Yours Sincerely,
Alvinology

Hi, I was just about to post the same question myself. I'm trying to sort out a friends iMac G5 with a Canon Pixma(?) printer. In this case the printer used to work OK, but after moving house and setting it up again, Print Utility crashes every time when trying to add the printer.
Thanks
Paul Nilsson

How to install HP printer driver *****

Hi,
How to install HP printer driver , so that i can see new device type in SPAD.
Thanks
Lisa

Hi Lisa,
proceed as below.
1)Log in to HP-UX as root (or an other username that controls the printers, and has all the rights to the directories).
2)Type sam on the command line and press enter.
3)Scroll to Printer and Plotters with the vertical scrollbar.
4)Click twice on Printers and Plotters.
5)Double click on LP Spooler.
6)Click twice on Printers and Plotters.
7)Select Actions on the menu bar and click on Add Remote Printer/Plotter.
8)For Printer Name type any name, Remote System Name use the DNS/Host name, or alternatively use the dotted-IP (200.200.200.11). Remote Printer Name should be one of the destination ports on the Printnet (d1prn, d2prn, etc.). Also select Remote Printer is on a BSD System. Press OK and the server will install the printer.
9)Click on OK.
10)For a test print type lp d Printername /etc/protocols.
And finally dont forget to make this printer as the default printer if u have only this.
Right click on the printer and and say make default.
Regards,
Bapu

LOST MY SOFTWARE FOR INSTALLATION HP PHOTOSMART PLUS, HOW CAN I INSTALL THE PRINTER IN ANOTHER MAC?

HELLO
I ALLREADY HAVE A HP PHOTOSMART PLUS PRINTER, BUT I LOST MY SOFTWARE INSTALLATION CD. I JUST ACCUIRED ANOTHER MAC, AND WOULD LIKE TO INSTALL THE PRINTER IN THIS COMPUTER.
WHAT CAN I DO TO INSTALL IT?
KIND REGARDS,
JAIME
This question was solved.
View Solution.

Hi Jaime,
What you can do is go to the Support and Drivers Area of the Hp website by following the link http://www8.hp.com/us/en/support-drivers.html
- just type in the Version of of the Photosmart you have, and then follow that by the Version of the MAC OS that you are running
- you will want to do this from the computer you are wanting to install the printer on.
simply download the Driver and Install and that Should Assist you in getting that printer set up on that computer as if it was coming from the Disk itself
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flas

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flashplayer.xpt:5) could not be written due to insufficient permission.

Perform a clean install as described in https://forums.adobe.com/thread/928315

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Oracle Instalation error (You do not have sufficient permissions to access)

Hi
my enviroment is SAP ECC6/Oracle 10g/ SUN Solaris 10 SPARC
I'm installing SAP but run into the error below. I don't understand why the inventory file is pointing to /home/prodora which does not exist. this directory is owned by root and ownership cannot be changed to user oraq11.
Is it possible to change the location of the inventory ?
kindly assist
regards
simbatech:oraq11> ./RUNINSTALLER
oracle_stage is not set (OK)
oracle_base is not set (OK)
oracle_home is not set (OK)
oracle_sid is not set (OK)
oracle_home_name is not set (OK)
oracle_inst_group is not set (OK)
from_location is not set (OK)
tmp_netca_file is not set (OK)
tmp_dbca_file is not set (OK)
Working in /oracle/stage/102_64/database/SAP ...
Oracle SID:            Q11
Oracle Home:           /oracle/Q11/102_64
Oracle Home Name:      Q11_102_64
Oracle Install Group: dba
Installing from:       /oracle/stage/102_64/database/stage/products.xml
oracle_stage="/oracle/stage/102_64"
oracle_base="/oracle/Q11"
oracle_version="102_64"
oracle_home="/oracle/Q11/102_64"
oracle_sid="Q11"
oracle_home_name="Q11_102_64"
oracle_inst_group="dba"
from_location="/oracle/stage/102_64/database/stage/products.xml"
tmp_netca_file="/tmp/.orainst_netca.15383"
tmp_dbca_file="/tmp/.orainst_dbca.15383"
ORACLE_BASE="/oracle/Q11"
ORACLE_HOME="/oracle/Q11/102_64"
================================
Preparing response files. Please wait:
======================================
Working on /oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP
/oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.15383: Done
You do not have sufficient permissions to access the inventory +'/home/prodora/oraInventory'.+ Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: No such file or directory
simbatech:oraq11>

Hi,
Yes, Solution describe in 350251 - Creating a New or 2nd Oracle SID with runInstaller
"THE SOLUTION"
The good news is the solution is very simple and takes a few seconds
First cd /var/opt/oracle
You will find a file called oraInst.loc # cat oraInst.loc
inventory_loc=/oracle/PR1/oraInventory
inst_group=dba
Use vi or emacs to edit the file and change the inventory_loc to the directory of the oracle instance you are currently installing. ie inventory_loc=/oracle/PR2/oraInventory
Restart your oracle installer eg. su - orapr2
cd /oracle/stage/816_64
setenv DISPLAY localhost:0.0
./runInstaller
Regards;

Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

After "Archive and Install", my printer no longer works

Powerbook 1.67 GHz PowerPC G4
Mac OS X Version 10.4.11
I recently had some issue with my password, so the Apple Genius people ran an archive and install, reset the user password, and got me back to my original state. However, I've had to run all these updates now, and can't figure out how to get the printer to work again. It worked perfectly fine before the archive and install, it was recognized right away.
I have tried the following:
I uninstalled and then reinstalled the printer software (Epson Stylus CX6000) from the installer CD. Didn't work. Unplugged and turned off power, then re-plugged and restarted everything. Didn't work. I have no idea what to do here. I downloaded any new updates to the software from the Epson website. Didn't work. Help?

If the correct printer driver is missing, and the Print selection
box says Any Printer, it may be unable to use that one.
See if the printer can be used in a different user account.
Sometimes if the system is messed up (even pros do it)
there may be a way to see if the issue is system wide or
if it is based in a problem in the admin user account.
Some optional printer drivers may be available at the printer
manufacturer's web site for downloads. Sometimes there is
a newer one for the entire class of printer models, and so
it may be for yours. Or there is GimpPrint/GutenPrint for
other drivers; their web page shows supported printers.
{Since you state that you've tried other driver options, then
you may have to consider doing a new 'archive & install'
and be sure everything is done right, and then update it.
Or an all new installation on a wiped empty hard drive.}
There should be a printer error log accessible through Console
and perhaps it may shed some light on the basic problem...
PS: Is this printer an Ethernet and USB printer? If so, have
you tried whatever other connection/cable to see if it works
when running on the other available protocol? The Ethernet
printer would use an IP address or hardware MAC address
and the appropriate cable, if the printer supports both.
Good luck & happy computing!
{ edited 2x }

E4200 and sufficient permissions to install a printer

Similar Messages

Maybe you are looking for