E4200 connect with Sony KDL-46EX701 at 2.4 Only

My E4200 does not connect with my Sony KDL-46EX701 at 5 GHz. The set sees the 5 GHz at medium strength or highter, but won't connect. Password is correct and verified. The Sony's UWA -BR100 adapter should work at 5 GHz, and it did work with my E3200 at 5GHz (unfortunately, it also caused the tv to recycle off and on whether connected at 2.4 or 5GHz).
2.4 works fine with the E4200 and the Sony.
Problem occurs with 1.0.0.1 firmware and 1.0.0.2 firmware.

As my first post mentioned, I've been there and done that to no avail.
I also tried a Netgear WNDR4000, with the same result.
I've noticed that the 5 GHz reception on the Sony looks weak/unstable. I think the problem is that Sony's UWA-BR100 stick has poor reception, particulary at 5 GHz. Worked ok in winter and spring, but even indoors w/AC and good ventilation, my usable wireless range has always dropped significantly in summer when it's hot and humid.
Anyway, I gave up. I took and Linksys E3000 that I was going to return, installed TomatoUSB on it, set it up to be a wireless ethernet bridge, disabled the 2.4 GHz radio, and then wired it to the Sony. Then I manually configured the IP settings on my Sony TV. With the E3000 as a wireless bridge, the E4200 and the Sony connect perfectly at 5 GHz. Expensive fix, unfortunatly.

Similar Messages

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

HT202157 my apple tv won't activate with sony kdl-40hx701

i cant activate apple tv with the sony kdl-40hx701

Does it start up ok or do you mean you get no video at all?
If just black screen then
Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.

How to connect with sony bravia.

Hi,
I'm trying to connect my Mac pro with my Sony Bravia LCD TV. I bought a MiniDP to VGA cable and I already had a VGA extension to connect with my TV. I used to use that cable to connect my other laptop and worked ok with frequent "no synchronisation". Once I connected all, nothing happened. I restarted the PC but nothing happened. I tried to play around with all connection, but nothing happened. I do use windows XP in my mac pro as well and it didnt work their either although my other PC working fine with same VGA cable. I'm not very sure my MiniDP to VGA cable is working or not? Is there anyway I can check its working. Also, someone (sorry forgot the name) in the forum said, HDMI works better then VGA. What do I have to do to connect my PC through HDMI. Is there any direct cable to connect MiniDP and HDMI? Thanks for your help.

The best way to test if the VGA adapter is bad or not is to try it with another display, preferably a computer monitor instead of a TV. If it doesn't work with a monitor, then that's stronger evidence the adapter is bad.
There are MiniDP to HDMI adapters. Here's an example of one. I believe this company will ship internationally. You might be able to find UK sources for similar adapters.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5311&seq=1&format=2

Wireless Connection with Sony PSP

I cannot my Sony PSP to the WRT54G using the wireless connection. What are the setting I need?

I have a wrt54g v5 with Firmware Version: v1.02.0 and the PSP has firmware version 3.11.
I shut off all security use DHCP (I also used manual settings) If I scan for a network I can see it and it show 100% signal strength.
But if I try to connect it tells me it can not locate an access point. I scanned the site, I reduced my becon times my rts and fragmentation times, still no progress.
I also have a WII and it also can not connect to the open wireless network. Yet when I scan for it, the Wii can see it as well.
I know it's my network and not somebody elses these divices are seeing as I have a very unique name for my network.
My Router picks up my work Laptop, my personal Laptop and a friends laptop with no issues. I dont think my router is bad but I read the forums and half the people can connect with their WII's and PSP's no problem and the other half, like me flounder. I setup wireless networks for a living and these games have me beat.
I used to use a network Everywhere wirelss router and that never gave me issue , using wep or open modes.. My Linksys.. Kills me.. Has anyone had a problem them fixed it? WRT54G Ver 5 Firmware Version: v1.02.0 please God help me, my 12 year old has me tourtured!

5800 does not maintain connection with Sony Ericss...

I recently upgraded from the N70 to the 5800. I was using a Sony Ericsson HBH-602 bluetooth headset with the N70, and it worked perfectly. Specifically, as long as bluetooth was enabled on the phone, all I had to do was turn on the headset and it would connect with the phone, and remain connected as long as both were powered on and in range.
With the 5800, the headset also connects to the phone when turned on, but the phone drops the connection a few seconds later. However, if I initiate the connection from the phone, it works as expected, and remains connected. This is usable, but it would be preferable if I could control the connection entirely from the headset, as described above.
Any suggestions would be greatly appreciated.
Thanks in advance.

I have the same problem but with Nokia BH-903.
It worked really fine with the N95, but with the 5800 it doesn't work so well. When i am in a call it always disconnect to the phone, or when i am listening to music it paused the music or it disconnect.

Apple TV doesn't connect with sony bravia KDL-40NX720 TV

I'd like to connect my apple TV (bought yesterday) to my Sony bravia KDL-40NX720.
I connect the Apple TV with the HDMI cable but it doesn't connect to the Sony.
What can I try?

Do you have a 2nd or third gen Apple TV? The problem may be you have 3rd Gen which requires a 1080i supporting TV and I am assuming the 720 at the end of your model number means it is a 720i TV. That would support 2 Gen apple TV but not 3rd. Is that possibly the problem?
Check which ATV you have and the tech spec of the TV. If I am wrong please post again so we can look at other issues.
Hope I am wrong by the way!
Jules

E65 not connecting with Sony HCB-300

Hi, I have the E65 and had it paired with the Sony Ericsson HCB-300 car kit by Bluetooth. It worked perfectly for the first month or so.
Now it doesn't seem to want to work!!
E65 finds the HCB-300 and adds it as a paired device. Phone even says it is connected. However I can't make a phone call. If I try to make a call, I get no volume on my end. The person I'm ringing can hear anything either. It is like the sound is muted.
I have tried deleting the paired device and starting again, however no change.
I know it is not the car kit as my husbands Nokia connects fine with it. So am thinking that there is a setting not quite right in the phone ..... or there is a fault in the handset.
Has anyone else has this problem or know how to fix it?
Thanks (in frustration!!)

Hi friend,
If you happen to know the solution for this problem.Let me know.Mail me at [email protected]

No picture using component connections with Sony STR-DG710 Receiver

I have been unable to get a picture (sound appears to be ok) using component cables to connect to a Sony 710 receiver - the (2) HDMI inputs on the receiver are taken by equipment that can not use component cables. Apple Store checked Apple TV unit and said component outlets were ok. I did barrow one of the HDMI cables to set the system up (1080i resolution was selected). Does anyone have an idea what the problem is?

There may be an easy answer here. It's your receiver - not the apple TV
1080p HDMI Inputs: The Sony receiver features two 1080p HDMI inputs and one 1080p HDMI output. The receiver transmits both audio and video through the HDMI monitor output to your TV or you can choose for the HDMI monitor out terminal to only output video to your television. Video signal that is input through HDMI input can only be output through the HDMI monitor output terminal.
Note: The receiver does not offer video upconversion.
So it looks like if you go HDMI in - you have to go HDMI out (to your TV)
If you go component in - you need to go component out (to your TV)

The connection with Sony Entertaiment Network timed out

Hi, today, when I tried to connect to PSN i got this error, even though 2 days ago it worked and I didn't changed anything since.The PSN is online, The Media Service is disabled, I tried to change my DNS (both the 179 and 129 ones - with 129 it failed the internet connection).I tried both with a cable and wireless, no difference.What can I do?

Yes.I tried both restore default settings and restore ps3, none both. I restarted my router too. After the ps3 restore when I added my details it said "Hi, <username>" but then, when i tried to log in it appeared the error 80710092, as usual.

How to connect Lumia 820 with Sony DSX A50BT

Hi,
In my car am my mobile(Nokia Lumia 820) not able to connect with Sony DSX - A50 BT.
Is there any additional setting s require .
Please share the procedure.
Thanks & Regards,
Anuj Mittal

The DSXA50BT Car Stereo is a non-US model. Please reach out to Sony India Support here for best assistance with this unit. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

Connecting my iMac 2.8GHz to Sony KDL-20S3000 LCD TV.

Can someone tell me what's the best Adaptor/cable to use, the Apple Mini DVI to VGA Adapter or the Apple Mini DVI to DVI Adapter? Do they both include the sound too? or is the VGA Adapter/Cable just picture? I would need an extension cable also, because my Sony 20" LCD TV is about 4 meters away. I've heard the DVI to HDMI cable does not work with Sony LCD's?
Thanks.

Nether of those include sound. Sound would have to be through an additional connection. Exactly which connection you use depends on what kind of picture that you want.

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote. There isn't one. I sure would appreciate help if someone knows a solution. My first post - hope I did this right.

if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
hope that helps?
rgds Lee.

How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

Hi
This Camera has three types of ports.
- Analog-out
- USB
- I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
And Your Camera only can send Photos via the USB-connection - NO VIDEO.
So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
There are no real way around this.
Yours Bengt W

E4200 connect with Sony KDL-46EX701 at 2.4 Only

Similar Messages

Maybe you are looking for