E4200 continuous flashing issue: Linksys support, can we get some feedback?

A few people in the "E-4200 My Review so far - I will answer any questions you have" thread (myself included) are experiencing the continuous flashing of the "Cisco" light on top of the router. Please see the aforementioned thread for details.
We've checked the manuals.
We've talked to tech support.
We've exchanged routers.
We've reset the routers dozens of times.
Nothing seems to work.
Can we just get some feedback on this? I'd be glad to provide feedback as to the settings I'm using in order to reproduce this problem, because, well, I can't not reproduce it.
Even if it can't be fixed right away, I'd just like to know that it's actually being looked at and that it'll probably just be fixed by a future firmware upgrade. Any feedback would be great!
Thanks,
kirkh

I had the same blinking. For me it was a neighbors wireless printer that had connected to my network but obviously could not authenticate. I found it by using the web configuration 'wireless', 'Wireless MAC configuration', and clicking the 'wireless client list'. From here I could see the offending unit and I blocked it. Since I did this no more blinking light. After three days of no blinking, I tested it by allowing the printer access again. Within minutes, the blinking started. Againg I configured to block the printer and blinking stopped.
majorbullet

Similar Messages

Can't open Disk 3, Can I get some feedback on this please..

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
not sure
- Filename
http://download.oracle.com/otn/nt/oracle9i/9201/92010NT_Disk3.zip
- Date/Time
Saturday June 30th, 12:48am
- Browser + Version
IE 6
- O/S + Version
Windows 2000
- Error Msg
Cannot open file (Disk 3)
I can't unzip this file. Its' giving me the above error message.

Google calender?
For iOS:
https://support.google.com/calendar/answer/151674?hl=en&ref_topic=13950
For android:
https://support.google.com/calendar/topic/2586645?hl=en&ref_topic=13950

Can i get some live problems faced on support for sap hr

Can i get some live problems faced on support for sap hr and how were they resolved? Please give a step by step detail of the sol.
Dear
Member, of all the Issues raised in the forum some of the issues are support issues you can have a look at all these threads
Please read the forum rules before Posting the Query

Hi,
Please be with this SDN.SAP Forum, you will get solutions of all types of queris.
Regards,
Ram Aware

Just upgraded to 10.6.8. Had to upgrade Adobe flash player. Now can't get any sound from websites!

Just upgraded to 10.6.8. Had to upgrade Adobe flash player. Now can't get any sound from websites. Advice please!

Check System Preferences > Flash Player > Advanced
Click: Delete All under Browsing Data and Settings
Then empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show develop menu in menu bar
Now click Develop > Empty Caches
Quit and relaunch Safari then try Flash on a website for sound.

When registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem?

when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanks

Is the English sim from the original carrier as that is usually the message you get with a carrier locked phone.

Using Mac OSX 10.7.1: recently replaced our DSL modum & wireless router and suddently I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing historty, forms, cookies and cache but it continues to happen.

Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

Upgraded to Mavericks, now I can't get some websites to load

I am not sure if the two issues are related, but I recently upgraded to Mac OS X Mavericks and now my internet browsers are really slow and I can't get some websites to load. When I check to see if the website is up, the response from http://www.downforeveryoneorjustme.com/ is that it is just me. I assume it must be something with the upgrade as I did not have the issue prior to upgrading. I have tried accessing these sites in various browsers (Safari - preferred, Firefox, and Chrome), but none of them receive data from the site.
I also had a lot of trouble attaching a .jpg to an e-mail in Safari and Firefox. Google Chrome was finally able to get it to attach. I wonder if this is related.
Some of the websites that won't load are
http://www.phdcomics.com
http://isitdownrightnow.com
http://tnlottery.com
Any help would be greatly appreciated.
James

This may help, worth a try, Do you know which version of Safari you were using on 10.6.8?
http://support.apple.com/kb/ts3408
The page also gives Internet trouble shooting help.

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

Hello,
I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
-1074397150 occured at IMAQ snap.vi
Possible reasons,
NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
Anyways, thanks,
Brian

Brian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com

TS1702 I can not get some apps to rotate to the landscape position. Help please !

I can not get some apps to rotate to the landscape or horizonal position. Help !

Not all apps support landscape positioning. If you'll post the name of the apps you are having problems with, someone can probably tell you if that is indeed the case in your situation.
Regards.

The tab order on new event creation needs changed. Can I get some +1's?

Can I get some +1's here that the Apple iCal Product Manager can use as Customer Feedback?
The Tab Order on creating new event pretty much doesn't reflect reality in creating events, and it would be better if it were changed ASAP. If it's not already in Snow Leopard, it should be in the _soonest point release after_ Snow Leopard release.
Right? +1 if you agree.
------- Background --------
When creating a new event, the tab order between fields is:
. Event name
. Location
. AM/PM of Start time
. Minute of End time
. AM/PM of End time
. Note
In many (most) cases, the start hour is wrong:
. If the event is being created from the Month view, the default Start hour is the top of the current hour. This has a low probability of being correct (1:24 worst case, 1:12 best case).
. If the event is being created from either the week or day, but is being started within the start/end time of an already-existing event, the user must click outside an existing event to create the new one - e.g. at a "wrong" start time - then correct the start time. (Attempting to click within an event and drag start-to-finish time simply causes the existing event to move, or an error dialog to be raised if you aren't the event owner.) (This need arises when you have multiple calendars, some of which containing "events" which are placeholders, or notices, vs. real events.)
Most commonly, I find myself needing the following Tab order:
. Event name
. Location
. Start hour
. Start AM/PM
. End hour
. End minute (to allow for changing the 1-hour meeting default)
. Note
iCal can use its current logic to deduce end AM/PM: It currently defaults to a 1-hour meeting, so when Start AM/PM is set, it can simply set Ending hour/minute/AM-PM to 1 hour later, then leave End AM/PM alone as the user sets Ending hour/minute.
Can I get a witness?
(Note that the system preference for permitting "Full Keyboard Access" does not resolve this issue. It simply adds all fields to the tab order, which is just as aggravating.)
Message was edited by: Jay Batson

I still hate the tab order.
Doesn't anybody else?

How can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not availa

how can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not available on my screen

Keensy I have requested a member of our support team contact you directly via telephone. Once I was able to review the correct account it appears our support team has tried multiple times to contact you. I would recommend checking your SPAM filtering in case you need to receive additional messages from our support team.
I did request that you be contacted via telephone. I am sorry for all of the difficulties which you have faced.
For future viewers of this discussion when contacting our support team at Contact Customer Care it is imperative that you be logged in under the account tied to your membership/subscription. While there is cancelation options available you will have an increased chance of being offered an opportunity to contact our support team if your account entitlement can be verified. For this to be done you will need to be signed into the same account as your membership/subscription/registered software title.

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

HT5622 i moved from Egypt to Canada, changed my info on app and still can't get some app because " item not available in the Egyptian store"

i moved from country to another, changed my info in app ID and still can't get some apps because item not available in the home country's store? any idea?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

E4200 continuous flashing issue: Linksys support, can we get some feedback?

Similar Messages

Maybe you are looking for