E4200 - Could not get it to work
I spent several hours trying to automatically and manually set this up with bad results.
What's great about it: Nothing
What's not so great: Hard to set up; didn't work
So the concern that you said is the configuration of the Router.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD so for that you need to unistall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...
Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...
But if you want to do it manually in that concern you need to inform you what IP address you get from the modem connected directly to the computer....
Similar Messages
-
I could not get ExportPDF to work. Something about a network error when trying to sign in.
I could not get ExportPDF to work. Trying to convert a pdf to a Word document. Got an error message. Something about a network error when attempting to sign in.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
How can I get thunderbird to work on my computer with hughes satellite internet. Previously, I had thunderbird, but when I switched to hughes.net, I could not get thunderbird to work. Please help?
<blockquote>
I could not get thunderbird to work.
</blockquote>
Can you be a little more specific about your problem?
What were you doing?
What happened?
What were you expecting to happen? -
E1200 - Could not get it to work with Apple Airport
Could not get it to install and gave up after tearing out my hair in frustration
What's great about it: Still wondering
What's not so great: Everything else
About me...
Internet phone user
Business Professional
No, I would not recommend this to a friend.
I use it in...:Small homeBefore I suggest you any troubleshooting steps, I would like to ask few questions. Like – in what manner you were trying to connect Airport Express with the Linksys/Cisco router E1200?
Basically, you can think of Airport Express as a wireless extension cord for replacing an Ethernet cable, a USB cable, and an audio speaker cable. So, it suppose to work wirelessly with the router. So, in this case you have to use the Linksys/ Cisco router E1200 as a Base Station, with the Apple AirPort as the repeater/secondary access point. (The protocol for this is called WDS. Apple's routers support it; the Linksys does as well.
Here are the steps to configure;
Configure your Linksys router (open a web browser to http://192.168.1.1):
Assign a wireless channel. You will have to set the same channel on the Airport Express.
Write down the MAC address for the wireless interface (under the Status tab).
Provide the security level which can match with the Apple Airport.
Configure your Airport Express (using Airport Utility):
Under Airport -> Wireless, set the Wireless Mode to "Participate in a WDS Network", and set the network name, security, password, and channel to match that on the E1200.
Now you'll have a new tab: under WDS, set the WDS Mode to "WDS remote” and the WDS Main to the MAC address you wrote down above. Also make sure to that "Allow wireless clients" is checked!
Under the Internet tab, set Connection Sharing to "Off (Bridge Mode)".
Click Update. Wait for the Airport Express to restart.
Check it:
Once the Airport Express is restarted, reconnect to your wireless network (if you've been disconnected). Make sure you can see both your main Linksys router (in a web browser) and the Airport Express (in Airport Utility). If you can only see one, it didn't work. Try disabling security on both. -
Wired Ethernet + Airport Express could not get them to work together
I am a newbie to Mac. My daughter has a Macbook. No wireless internet access is allowed in her dorm room. Each room has an Ethernet port with a cable so she could plug it in her Macbook and access the Internet. I bought her an AirportExpress a few weeks ago. I set the Airport Express up to connect her printer so she could print wirelessly and stream iTunes to her stereo within her room. I could do both without problem, but if I turned on the Airport on Macbook, Safari could no longer access the Internet. If I turned off the Airport, then the Internet works fine. The school does not allow connecting the Airport Express to the Ethernet Lan port in her room (for security reason), so I could not configure the Airport Express as others would normally do by also plugging in the Ethernet cable.
How could I get the above work by being able to steaming music via Airport and still be able to access the Internet via the wired Ethernet cable. Thanksssbkk, Welcome to the discussion area!
By default this is not possible. However using information from Apple's "Mac OS: Connecting to the Internet and sharing files locally at the same time" it might be possible. Try these directions:
Choose System Preferences from the Apple menu.
Choose the Network preference pane.
Choose the Ethernet port since you use this to physically connect to the Internet.
Click the TCP/IP tab. This pane should already be set up as directed by her school.
Choose Network Port Configurations from the Show pop-up menu.
If the Ethernet port is not at the top of the list, drag it to the top.
Locate the AirPort you want to use for Printing.
If AirPort is not second in the port configurations list, drag it to the second position.
Choose AirPort from the Show pop-up menu.
Click the TCP/IP tab.
Choose Manually from the Configure pop-up menu.
Enter these settings:
Subnet mask: 255.255.255.0
IP address: 10.0.1.201.
Leave the router and other fields blank.
Click Apply Now. -
I tried to configure 2 windows users accounts using a single library per the instructions in HT1203. My iTunes library is on an external drive. I cannot get this to work. Any suggestions?
To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions. -
I also tried a system restore and it wouldnt work after that either. I can not even get it to install when i go to the website to install it, it goes through the whole process like it installed it, but it never shows up.
You can reinstall Firefox by overwrite it.(Remember download version lasted). Don't insintall your old version Firefox.And all bookmark,add-on will not be deleted.
Good luck! -
Could not get JWS to work locally
Hi,
I am trying to launch my file in c:\applet\webStartDemo\ dirctory. The name of the file is TheTIME.java.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.net.*;
import javax.jnlp.*;
public class TheTime{
static BasicService basicService = null;
public static void main(String args[]) {
JFrame frame = new JFrame("Time Check");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JLabel label = new JLabel();
Container content = frame.getContentPane();
content.add(label, BorderLayout.CENTER);
String message = "missing";
BufferedReader reader = null;
try {
Socket socket = new Socket("time.nist.gov", 13);
InputStream is = socket.getInputStream();
InputStreamReader isr = new InputStreamReader(is);
reader = new BufferedReader(isr);
reader.readLine(); // skip blank line
message = reader.readLine();
} catch (MalformedURLException e) {
System.err.println("Malformed: " + e);
} catch (IOException e) {
System.err.println("I/O Exception: " + e);
} finally {
if (reader != null) {
try {
reader.close();
} catch (IOException ignored) {
label.setText(message);
try {
basicService = (BasicService)
ServiceManager.lookup("javax.jnlp.BasicService");
} catch (UnavailableServiceException e) {
System.err.println("Lookup failed: " + e);
JButton button = new JButton("http://java.sun.com");
ActionListener listener = new ActionListener() {
public void actionPerformed(ActionEvent actionEvent) {
try {
URL url = new URL(actionEvent.getActionCommand());
basicService.showDocument(url);
} catch (MalformedURLException ignored) {
button.addActionListener(listener);
content.add(button, BorderLayout.SOUTH);
frame.pack();
frame.show();
}It does not run correctly when lauched by clicking the jnlp file which resides in same directory. Here's the code for the file
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+"
codebase="file:///c:/applet/webStartDemo/"
>
<information>
<title>Time Check</title>
<vendor>Java Developer Connection</vendor>
<homepage href="/jdc" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<security>
<j2ee-application-client-permissions/>
</security>
<resources>
<j2se version="1.2+" />
<jar href="JNLPTime.jar"/>
<property name="javaws.debug.0" value="+TraceSecurity"/>
<property name="javaws.debug.1" value="+TraceCache"/>
<property name="javaws.debug.2" value="+TraceDiskCache"/>
<property name="javaws.debug.3" value="+TraceDownload"/>
<property name="javaws.debug.4" value="+TraceXMLParsing"/>
</resources>
<application-desc main-class="TheTime" />
</jnlp>It says java.lang.NoClassDefFoundError: TheTime$1
at TheTime.main(TheTime.java:48)
Line 48 of the code is:
ActionListener listener = new ActionListener() {
Thanks in advance>
137 Sat Dec 01 20:57:24 EST 2007 META-INF/MANIFEST.MF
258 Sat Dec 01 20:57:24 EST 2007 META-INF/JDC.SF
1080 Sat Dec 01 20:57:24 EST 2007 META-INF/JDC.DSA
0 Sat Dec 01 20:56:14 EST 2007 META-INF/
2439 Sat Dec 01 20:52:38 EST 2007 TheTime.classIs there a mistake here?>There surely is. I noticed your code declared inner 'anonymous' classes, and the code error mentioned '$' - indicating an inner class.
When I compile* the code, I get two classes
Directory of D:\projects\junk\numbered\552TheTime
03/12/2007 01:23 PM 670 TheTime$1.class
03/12/2007 01:23 PM 2,283 TheTime.classThe Jar file is missing the first listed class.
* Note:
a) That code uses deprecated methods. To fix it..
// ...in main
//frame.show();
frame.setVisible(true);b) I commented the JNLP services to get the code to compile more easily, so the class sizes will likely be smaller that what you are seeing. -
Just bought Apple TV and could not get it to work with my iTunes.
iTunes can't find Apple TV. Tried reinstalling iTunes and even went disconnect ATV, router and modem...restarted my Mac pro. Still did not work! Changed my router channel and checked my config as well....
ATV is able to work with the trailers and radio including UTUBE. What is wrong with iTunes?You might have more luck asking in the Apple TV forum http://discussions.apple.com/forum.jspa?forumID=1185
-
I have not been able to get or send email with my embarqmail account. I have been told to put host as pop.centurylink.net and and stmpcenturylink.net and server port 587. If anyone can help me please let me know. Thx
Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us -
hi bought a clickfree hard drive from qvc when i connect it the computer keeps saying ntfs-3g library not found,and so i have just bought a hitachi touro,and the same message keeps coming up can anybody help please
Drive Preparation
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
Hey there,
I have been trying to set up Leopard server for over a week. I can not get DNS, Open Directory and Wiki to work for me. This is my 5th instal. The first attempt, I went with standard thinking that the ease of use would be an asset, but then after getting it going I realized that there was no FTP access with standard, which was not an option.
INSTAL 2: I reformatted and went ahead with the advanced server this time around. In no time I had FTP; AFP; iChat and web services running fine. Then when I went to set up wiki i realized that I had to have DNS and Open Directory running before that would work. I guess that I should of read up on that one... I had actually created all of my users and groups in local directory which seemed to work fine for ftp; afp and ichat for a few days but I really wanted to get the wiki going.
INSTAL 3: I reformatted, set up DNS (or at least I thought I did) Open Directory and then recreated all of my users and groups in Open directory. I quickly got afp running; then ftp and ichat (jabber) with no issues. But when I went ahead with wiki, I could not get it to work properly. I could log into the wiki from my LAN using the local domain name that I had chosen but could not get it to work when I would attempt to do it from home using my dyndns.org account which forwards to my office IP which is mapped through router port 80 to my servers local IP. When doing this I was taken to: http://myurl.dyndns.org/groups/workgroup/
I got the message:
"Not Found
404: No group with that name (workgroup) hosted on this server"
If I click on "Groups" the error goes away and I see my wiki group but if I clicked on it I would get:
"Not Found
404: No group with that name (marcato) hosted on this server"
When I went back to the office I could still get at my wiki by going to my local url: minserver.local and then selecting groups and then clicking on the desired wiki and then logging in. I then tried to accessing it using the machine's local IP since that is essentially what is happening when I come in from the WAN side using my dyndns.org account. So i typed in its local address and got the 404 error. When I click on groups again, just like when I was home coming in over the WAN, I get the same message. Why would I be seeing the group but not able to log in to it. Why would it allow me to access and use the Wiki from the LAN using miniserver.local but not using the machine's static Local IP address?
I then decided to go watch all of Sean Collin's videos on Leopard Server in oder to get a handle on this.
INSTAL 4: Walked through everything with Sean's video up to getting DNS set up. It failed! At this point I was frustrated so I decided to throw in the towel on Advanced. I got out my old tiger installer and set up ftp on another older G4 and then went for INSTAL 5. This time I reverted back to Standard, got all of the services running fine but as soon as I got home I ran into the same issue with the wiki. I could not access it from outside of the Office LAN. I went through and opened every port recommended and still nothing. Then, in efforts to try to make it work and in frustration of the limitations of the Standard interface I upgraded the configuration from standard to advanced to see if I could get to the bottom of this. I went back to reading a bunch more stuff about Mac Server and found the Sudo Changeip -checkhostname. It gave me the proper IP of the server as well as the proper hostname but said that the DNS was not working properly and needed to be repaired. I tried a few hacks I found online but still could not get the DNS going properly
I am not sure what to do now. In an ideal world I would love to get leopard Advanced running properly so that I could host the wiki, afp, ftp, and ichat (jabber) from the same machine. But no matter what I try I can not seem to wrap my head around DNS. Even if I could do it with Standard and keep the ftp on the old mac with tiger... This is frustrating since I feel really confident with setting up everything else, I just do not seem to be able to get DNS to work properly which I assume has to do with the problem with the wiki not working from the WAN.
Can someone please help me here?I have tried a bunch of hacks to try to get things working and still nothing. I actually find that the server is running really slow now so I am clearly going to be starting from skratch again. I will wait for some advice before I proceed. Here is what I have set up:
1. I made a fake url using dyndns which routes to the IP address of the router at work. I want to be able to use this address to access the wiki from WAN
2. I have the following ports opened and assigned to my servers LAN address:
On TCP 113 113 10.0.1.22 Identification Protocol
On TCP 88 88 10.0.1.22 Kerberos
On TCP 106 106 10.0.1.22 Mac OS X Server Password Server
On TCP 25 25 10.0.1.22 Mail service smtp
On TCP 123 123 10.0.1.22 Network Time Protocol (NTP)
On Both 311 311 10.0.1.22 Remote Server Admin / Workgroup
On TCP 22 22 10.0.1.22 SSH
On Both 3283 3283 10.0.1.22 Server ARD
On Both 5900 5900 10.0.1.22 Server VNC ARD
On UDP 500 500 10.0.1.22 VPN
On UDP 1701 1701 10.0.1.22 VPN
On TCP 1723 1723 10.0.1.22 VPN
On UDP 4500 4500 10.0.1.22 VPN
On UDP 170 170 10.0.1.22 VPN L2TP
On Both 80 80 10.0.1.22 Web Server on Mini
On TCP 625 625 10.0.1.22 Workgroup Manager
On TCP 21 21 10.0.1.22 ftp
On Both 8443 8443 10.0.1.22 iCal SSL
On Both 8008 8008 10.0.1.22 ical server
On TCP 5190 5190 10.0.1.22 ichat Server
On TCP 5220 5220 10.0.1.22 ichat Server
On TCP 5222 5222 10.0.1.22 ichat Server
On TCP 5223 5223 10.0.1.22 ichat Server
On TCP 5298 5298 10.0.1.22 ichat Server
On UDP 5190 5190 10.0.1.22 ichat Server
On UDP 5297 5297 10.0.1.22 ichat Server
On UDP 5298 5298 10.0.1.22 ichat Server
On UDP 5353 5353 10.0.1.22 ichat Server
On UDP 5678 5678 10.0.1.22 ichat Server
On UDP 16384-16403 10.0.1.22 ichat Server
On Both 7777 7777 10.0.1.22 ichat Server file
On TCP 5269 5269 10.0.1.22 ichat Server to Server
On Both 5109 5109 10.0.1.22 istat for mini server
On Both 16563 16563 10.0.1.119 pc
On Both 8086 8086 10.0.1.22 wiki server
On Both 8010 8010 10.0.1.22
3. I am not sure what is meant exactly by a fully qualified domain. From what I understood in Sean's Collin's videos was that this was a url that I was to make up on my local network and that putting the . at the end made it FQDN. I choose: miniserver.local. Am I totally missing the mark here?
Here are the parts of the set up where I am really confused:
a. When setting up the server with Server Assistant, when it asks for Primary DNS and computer name. What am I supposed to put in here? I read one post that recommended that quiting the set-up assistant before this point and doing it manually?
b. Once I get through the assistant and launch Server Admin, and sign into it using the servers local IP, get into DNS and go to add zones, I am REALLY CONFUSED.
- I add my primary zone, What is the primary zone? What do I enter here? What about the name server? I do not understand the difference between these 2 things.
c. Then I go to add my A record for the machine. What should its Machine name be? the same as the primary zone?
What is the easiest way to get through this? I know that once I this is set up and I can get the wiki to work over the WAN that I am not going to have any problems with the rest. I don't even want to bind the computers to the server if I don't have to. I know that for ichat (jabber); afp and ftp that this is not required since every time I have attempted to get the server up these services worked every time without the binding. -
I was useing my colne tool in apetrure when, apeture froze. I could not get it to work again, so I turned off my computer, re booted my machine and tried to open the programme again. I can not get aperture to open again and I can't open I photo either. Does anyone have any suggestions to help me get the programme running again? I have a deadline to meet this evening. Help!
I have tried both options.
When I got to point 3 I choose the library I was working on and the same error message popped up, so this option did not work.
I then tried the second suggestion and chose the repair option but as before there is no sign of a repair database grogress indicator. Where would I be able to see this and what does it look like. I can't see any evidence of anything happening on my screen.
I have also just tried the first option that comes up in the pop up box where you have to enter your password, this resulted in the same error message.
I don"t know what to do.
I don't really want to have to go for the third option where you have to rebuild you data base - Would this result in loosing images? -
Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas
Try these two steps:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Maybe you are looking for
-
Could someone help please... Don't understand why this query says "... not properly ended": UPDATE TBL1 SET TBL1.T1V1 = TMPTBL.TTV1, TBL1.T1V2 = TMPTBL.TTV2, TBL1.T1V3 = TMPTBL.TTV3, TBL1.T1V4 = TMPTBL.TTV4, TBL1.T1V5 = TMPTBL.TTV5, TBL1.T1V6 = TMPTB
-
Is there any Help information for DPP 4.1.50.0? All I get from the menu pulldown is version information? If I click on jpg or tif thumbnails they open in a window and I can shrink or enlarge the image and perform editing functions. This is not poss
-
I recently moved into a new town and no longer receive Verizon service there. According to the Verizon service map I should be receiving coverage. Is there anything that can be done about this?
-
Just bought Premiere CS6. Have an issue importing ProRes files. Have searched a dozen forums and FAQ pages, and not got a clear or functional answer. I'm trying to find a phone number for Adobe Product support. It is almost evil. Every page take
-
My games are not opening. I tried resetting my iPad but still not opening. once pressed, it doesn't do a thing.